A bus travels to proviso east high school from oprfhs. it takes the bus 0.1 hrs to get there when it is travelling 30 miles per hour. if the bus traveled from phs all the way back to oprfhs in 0.15 hrs then what is the bus's displacement?

The linear speed of the helicopter blade is 33.51 m.

The tangential speed of the helicopter blade is calculated as follows;

v = ωr

where;

ω  = 80 rev/min

ω = 80 x 2π rad/rev x 1 min/60s

ω = 8.378 rad/s

v =  8.378 rad/s x 4 m

v = 33.51 m

Thus, the linear speed of the helicopter blade is 33.51 m.

Learn more about linear speed here: https://brainly.com/question/15154527

#SPJ4

The complete question is below:

Find the tangential speed of the helicopter's blade.

The changes of energy in an electrical train as it approaches a station and breaks to halt are potential energy → friction → heat and sound

- → friction on train wheels due to brakes reduces KE of train to zero

- → heat and sound to surroundings

Energy, according to scientists, is the capacity for work. The ability to transform energy from one form to another and use it to perform tasks is what makes modern civilization possible. People utilize energy to travel by foot and bicycle, drive vehicles on land and in water, prepare meals on stoves, create ice in freezers, illuminate our homes and workplaces, create goods, and launch people into space.

Energy comes in a wide variety of forms, including:

These energies can be divided into two categories for working energy:

Learn more about energy

https://brainly.com/question/13881533

#SPJ4

We have the given equation as [tex]\frac{7x}{(x+6)(3x+2)}[/tex] that we have to convert through partial fraction decomposition.

The partial fraction decomposition or partial fraction expansion of a rational fraction in algebra is the process of expressing the fraction as the product of a polynomial (possibly zero) and one or more fractions with a simpler denominator.

A rational fraction is defined as one that has a polynomial as both the numerator and the denominator.

We have to find the form of the partial fraction decomposition of the function.

The given rational function has two factors in multiplication form in the denominator.

Also, the degree of the numerator is less than the denominator. Hence, the form of partial fraction decomposition of the function is:

[tex]\frac{7x}{(x+6)(3x+2)}[/tex] = [tex]\frac{A}{x+6} + \frac{B}{3x+2}[/tex]

To know more about Partial Fraction Decomposition, visit:

https://brainly.com/question/2516522

#SPJ4

The Volume of Copper Cube with mass 153.6 g and density 8.96 g/cm³ is 17.14 cm³ and its Edge is 2.58 cm long.

We have a Copper Cube of mass 153.6 g and density 8.96 g/cm³.

We have to calculate the volume and length of the cube in cm³ and cm respectively.

The density and mass of body are related as follows -

M = ρV

Where -

M - mass of body

ρ - density of body

According to the question, we have →

Mass of copper cube = 153.6 g

Density of copper cube = 8.96 g/cm³

Using the formula discussed above -

M = ρV

V = M/ρ = 153.6/8.96 = 17.14 cm³

We know that the volume of cube is -

V = a x a x a

a³ = 17.14 cm³

a = 2.58 cm

Hence, the Volume of Cube is 17.14 cm³ and its Edge is 2.58 cm long.

To solve more questions on Mass - Density Relation, visit the link below-

https://brainly.com/question/4235232

#SPJ4

The lowest 19.152 [tex]\frac{w}{m^{2} }[/tex] frequency that will produce the maximum intensity (Imax) at the observer, assuming the observer will still hear an intensity of 6 w/m2 when [tex]S_{1}[/tex] or [tex]S_{2}[/tex] is heard alone.

We have [tex]I_{1} =I_{2}[/tex]

[tex]= 6 w/m^{2}[/tex]

Path difference

δ = 5.6568 - 4

δ = 1.6568 m

v = 335 m/s

Intensity I = [tex]4I_{1} cos^{2}[/tex](πδ/λ)

[tex]= 4I_{1} cos^{2}[/tex](πδf/v)

[tex]= 4 * 6 cos^{2}(\frac{\pi *1.6568*30}{335} )[/tex]

I = 19.152 [tex]\frac{w}{m^{2} }[/tex]

the lowest frequency is selected to cowl the N-point signal at its coarsest scale with the aid of the default wavelet's two-time popular deviations. the very best frequency wavelet bandpass filter out loses half of of its height importance at the Nyquist frequency because of the most frequency.

guy's voice has the lowest frequency in comparison to other sounds seeing that frequency and pitch cross hand in hand. Pitch denotes the voice's shrillness. the man's voice is the selection with the least strident tone. It, therefore, has the bottom pitch of all and for this reason the bottom frequency.

Know more about frequency:

https://brainly.com/question/5102661

#SPJ4

Answer:

sp3 d 2

Explanation:

The correct answer is 1.07m.

The area surrounding an electric charge where its impact may be felt is known as the electric field. When another charge enters the field, the presence of an electric field may be felt. The electric field will either attract or repel the charge depending on its makeup. Any electric charge has a property known as the electric field. The charge and electrical force working in the field determine the strength or intensity of the electric field.

Here, is the charge per unit length, r is the distance from the wire, and

is the free space permittivity  ε_0. Electric field due to the long straight wire is,

E= λ/2πε_0r

Rearrange the equation for r.

r=λ/2πε_0E

Substitute 2.41 N/C for E,

E=1.44×10^-10C/m

λ=8.85×10^-12C^2/Nm^2

r=(1.44×10^-10C/m)/(2(3.14)(8.85×10^-12C^2/Nm^2)(2.41N/C))

r=1.07m

At a distance of 1.07 m the magnitude of electric field is 2.41 N/C.

To learn more about electric field refer the link:

https://brainly.com/question/12821750

#SPJ4

The change in the momentum of the balls is -8 kg.m/s.

The initial momentum of the balls is calculated as follows;

Pi = 4 kg(4 m/s) + 2 kg(2 m/s)

Pi = 20 kg.m/s

Pf = 2 m/s (4 kg + 2 kg)

Pf = 2 m/s (6 kg)

Pf = 12 kg.m/s

ΔP = Pf - Pi

ΔP = 12 kg.m/s - 20 kg.m/s

ΔP = -8 kg.m/s

Thus, the change in the momentum of the balls is -8 kg.m/s.

Learn more about change in momentum here: https://brainly.com/question/7538238

#SPJ4

The complete question is below:

What is is the change in momentum of the balls?

mU1 + mU2 = mV1 + mV2

(5 × 6) + (3 × 4) = 5V + 3V

30 + 12 = 8V

42 = 8V

V = 5.25m/s

The velocity of the ball after the collision is 5.25m/s.

While velocity refers to the speed and direction of an object's motion, speed is the rate at which an object moves along a path over time.

The rate at which something moves in a certain direction is referred to as its velocity. as quickly as a car traveling north on a highway or a rocket taking flight. The magnitude of the velocity vector's absolute value will always be equal to the motion's speed because it is a scalar.

To learn more about velocity from the given link:

brainly.com/question/18084516

#SPJ4

To study vectors it is best to select a coordinate system and manipulate it in that coordinate system and the component of A in x is 0.9396 while in y it is 0.342.

An item with both magnitude and direction is referred to be a vector.

A vector can be visualized geometrically as a straight spline, with a pointing in the orientation and a length equal to the value of the vector.

A vector has magnitude and direction so we can form a vector coordinate system and manipulate each vector in that such that it will be clear to study all vectors.

Given the vector A,

Magnitude |A| = 1 units

The angle of inclination from the x-axis is 20°.

Component of A in the x-axis ⇒

|A|cos20° = 1(0.9396) = 0.9396

Component of A in the y-axis ⇒

|A|sin20° =1(0.342) = 0.342

Hence "The component of A in x is 0.9396 while in y it is 0.342".

For more information about vector,

brainly.com/question/13322477

#SPJ4

Given question is incomplete with the missing image attached below;

The part of river's current moves at a 1.486 m/s speed.

the distance between two points, objects, lines, etc. Remoteness is the quality of being physically separated from another thing or person. a line drawn in the universe. To walk seven miles in one hour would be too time-consuming.

The difference between the change in distance and the change in time is used to compute the rate of change.

Rate: times the distance Time

The distance is 16.5 miles, and the time is 5.5 hours.

If we enter this into the formula above, it yields:

16.5 - 5.5 / 10.9 - 3.5 = 11/7.4 = 1.486 m/s is the rate of change.

Calculations show that the constant rate of change is 1.486 m/s.

learn more about distance here-

https://brainly.com/question/15172156

#SPJ4

Answer:

false

Explanation:

Minimum volume must the slab have so that a 45 kg boy can sit on the slab without it sinking is 0.465 m³.

What is buoyant force?

The buoyant force is the upward force exerted on an item that is fully or partially submerged in a fluid. This upward thrust is also known as an upthrust. Because of the buoyant force, a body submerged partially or entirely in a fluid appears to  be lighter or to lose weight.

Given:

Density of the styrofoam, ρ' = 32 kg/m³

Now, let the volume of the slab = V

the submerged volume be = V ;

now, the volume of water displaced will be V  

thus,

the buoyant force acting will be = ρVg

{where,

ρ is the density of water

g is the acceleration due to gravity}

now,

total downward force acting = weight of the boy + weight of the slab

total downward force acting =45 × g + ρ' × V × g

For the no sinking condition, buoyant force should be equal to the total downward force.

thus,

ρ × V × g = 45 × g + ρ' × V × g

or

ρ × V = 45 + ρ' × V

on substituting the values

V ( 1000 - 32 ) = 45 ;

or

V = 0.465 m³

To know more about buoyant force, go to URL

https://brainly.com/question/11884584

#SPJ4

The average time between two drops falling t = 2/5 sec.

To calculate average time use formula,

t + t / product

So,

given,

time = 20 s

drops = 50

average time = ?

From this,

measured time for 50 drops = 20sec

Time required for 1 drop = 20/ 50

Average time between two drops = (2/5 + 2/5) / 2

Hence,

The average time between two drops t = 2 / 5

Average Time on Page is a web analytics metric that gauges how long, on average, all website visitors stay on a single page. Only the average amount of time that users spend on non-exit pages is measured by this metric, which ignores exit pages and bounces.

To know more about gauges :

https://brainly.com/question/28481877

#SPJ9

With the use of formula, the maximum height reached by the ball in term of h is 4h

A projectile is any object thrown into the space or atmosphere which take a trajectory path.

If you toss a ball straight up, and it reaches a maximum height h above the launch position, Then the maximum height reach will be

v² = u² - 2gh

But at maximum height, v = 0

u² = 2gh

h = u² / 2g ...... (1)

Also, the time taken will be;

v = u - gt

since v = 0,

u = gt

Substitute u into equation 1

h = (gt)² / 2g

If you want to double the length of the time interval during which the ball stays in the air above the launch position, then,

u = g2t and the maximum height will be

H = (g2t)² / 2g

H = 4g²t² / 2g

H = 4(gt)² / 2g

but h = (gt)² / 2g

H = 4h

Therefore, the maximum height you have to throw it in terms of h will be 4h.

Learn more about Maximum height here: https://brainly.com/question/12446886

#SPJ1

A 0.900 kg block that is attached to a spring with spring constant 13.0 n/m when hit with the hammer has the amplitude of oscillation as 11.637 x 10^-3 cm.

When an object’s motion repeats in a predetermined cycle, it is said to be in periodic motion. The motion described here is an oscillation.

Spring and pendulum motion are two straightforward instances of oscillations, but there are numerous additional instances as well.

The fact that the item is in a stable equilibrium position is a key characteristic of periodic motion. A restorative force that is pointed in that direction as well. The application of force occurs in spring.

If x is the compression of the spring after it is hit,

1/2 k x² = 1/2 m v²

13 x² = .90 x (41 x 10⁻²)² 1681

x² = 116.37 x 10⁻⁴

x = 11.637 x 10^-5m

11.637 x 10^-3 cm

Amplitude of oscillation = 11.637 x 10^-3 cm

To know more about spring force visit:

https://brainly.com/question/14655680

#SPJ4

At a distance of 1.7 cm, the horn will begin to cause pain.

The source is an isotropic point source.

Let the distance at which the horn is barely audible be

[tex]r _2.[/tex]

[tex]r _2= 17 km[/tex]

Let the distance at which the horn will cause pain to be

[tex]r _2.[/tex]

[tex]A _{phere} = 4\pi \times r ^{2} [/tex]

The intensity ratio between barely audible and painful threshold is,

[tex]I = \frac{P }{A}[/tex]

[tex] \frac{I _2}{I _1 } = \frac{\frac{P}{4\pi \times r ^{2} _2 } }{ \frac{ P}{4\pi \times r ^{2} _1 }} [/tex]

[tex] = ( \frac{r _1 }{r _2 } ) ^{2} [/tex]

[tex]10 ^{ - 12} \: is \: ratio \: of \: the \: intensity [/tex]

between barely audible and painful threshold.

So,

[tex] \frac{I_2 }{I _1 } =( \frac{r _1 }{r _2 } ) ^{2} [/tex]

[tex] \frac{I_2 }{I _1 } = 10 ^{ - 12} [/tex]

[tex]r _2 = 17000 \: m[/tex]

The distance at which the horn will begin to cause pain is,

[tex]r _1 = r _2 \sqrt{10 ^{ - 12} } [/tex]

[tex]r _1 = 17000 \sqrt{10 ^{ - 12} } [/tex]

[tex]r _1 = 0.017 \: m[/tex]

[tex]r _1 = 1.7 \: cm[/tex]

Therefore, at a distance of 1.7 cm horn will begin to cause pain.

To know more about intensity, refer to the below link:

https://brainly.in/question/535414

#SPJ4

1905, Albert Einstein. The theory of special relativity explains how speed affects space, time, and mass. Small amounts of mass (m) can be interchangeable with large amounts of energy (E), as defined by the classic equation E = mc2, according to the theory, which offers a means for the speed of light to define the link between energy and matter.

When talking about extremely high energy, incredibly fast speeds, and astronomical distances without the difficulties of gravity, special relativity is typically employed. With the publication of his general relativity article in 1915, Einstein formally incorporated gravity into his ideas.

The mass of an object and the energy needed to move it both grow unlimited as it gets for any matter to go faster than light travels. This cosmic speed limit inspires new realms of physics and science fiction, as people consider travel across vast distance closer to the speed of light. Therefore, it is not possible.

To learn more about Special relativity:

https://brainly.com/question/28289663

#SPJ4

the maximum e-component of an electromagnetic wave is 600 v/m then the maximum b-component is B = 2.0 * 10^-6 T.

In terms of science, electromagnetic radiation is made up of electromagnetic field waves that are travelling through space while carrying radiant electromagnetic energy. It consists of X-rays, gamma rays, microwaves, infrared, light, and radio waves. These waves are all a component of the electromagnetic spectrum.

Em/Bm = c

Bm = c*Em

B = E/c

B = 600 V/m / 299,792,458 m/s

B = 2.0 * 10^-6 T

to learn more about electromagnetic wave go to -

https://brainly.com/question/13874687

#SPJ4

The mass of the block is:_force

Given, force f=8N.

acceleration (a) = 2 m/s 2. Now, a cording to

Newtons Law of force where, me mass

or,

m-Ea

= 8 = 4kg

What is force ?

In physics, a force is a power that could exchange the motion of an item. A force can reason an item with mass to alternate its velocity (e.g. moving from a kingdom of relaxation), i.e., to accelerate. force also can be described intuitively as a push or a pull. A pressure has each significance and course, making it a vector amount. it's far measured within the SI unit of newton (N). force is represented by the symbol F (formerly P).

The original form of Newton's second regulation states that the net pressure acting upon an object is same to the price at which its momentum adjustments with time. If the mass of the item is consistent, this regulation means that the acceleration of an item is without delay proportional to the internet pressure performing on the item, is in the route of the net force, and is inversely proportional to the mass of the item.

principles associated with pressure include: thrust, which will increase the velocity of an item; drag, which decreases the velocity of an item; and torque, which produces changes in rotational velocity of an item.

Learn more about force https://brainly.com/question/13191643

#SPJ4

The average speed for the whole trip will be 40 miles per hour.

The average speed is the ratio of the total distance over the total time taken. Then the average speed is given as,

Average speed = (Total distance) / (Total time)

You drive for 30 minutes at 30 miles per hour. Then the distance covered will be

D₁ = 30 x 30 / 60

D₁ = 15 miles

And then for another 30 minutes at 50 miles per hour. Then the distance covered will be given as,

D₂ = 50 x 30 / 60

D₂ = 25 miles

Then the average speed for the whole trip will be

Average speed = (15 + 25) / (0.5 + 0.5)

Average speed = 40 / 1

Average speed = 40 miles per hour

Thus, 40 miles per hour will be the average speed for the whole trip.

More about the average speed link is given below.

https://brainly.com/question/12322912

#SPJ4

The g - string will stretch by 0.0016 mm.

We have a g - string of a guitar with given specifications.

We have to determine how many mm does a 75-cm-long g - string stretch when it’s first tuned.

According to the question -

The force of tension in the string -

[tex]$v = \sqrt{\frac{T}{\mu} }[/tex]

T = [tex]$v^{2} \mu[/tex] = 250 x 250 x 0.0011 = 68.75 N

The Yung modulus of steel = 2 x [tex]10^{11}[/tex] N/[tex]m^{2}[/tex]

the amount by which the g - string will be stretched is given by -

[tex]$\delta L = \frac{LT}{Y(\pi r^{2})}[/tex]

Substituting the values -

[tex]$\delta L = \frac{0.75\times 68.75 }{(2\times 10^{11} )\times (\pi (2.2 \times 10^{-4}\times 2.2\times 10^{-4}) )}[/tex]

[tex]\delta L=[/tex] 0.0016mm

Hence, the g - string will stretch by 0.0016 mm.

To solve more questions on Oscillations, visit the link below-

https://brainly.com/question/15872783

#SPJ4

[ The given question is incomplete. The complete question is

" The G string on a guitar is a 0.46-mm-diameter steel string

with a linear density of 1.1 g/m. When the string is properly

tuned to 196 Hz, the wave speed on the string is 250 m/s. Tuning

is done by turning the tuning screw, which slowly tightens—and

stretches—the string. By how many mm does a 75-cm-long G

string stretch when it’s first tuned? "]

Mass of disc m =16.84 kg

Moment of inertia of disc about axis perpendicular to the plane of disc and passing through its centre = MR²/2

12 =  MR²/2 × 5.7

12 =  M(0.5)²/2 × 5.7

Mass = 12 × 2 /5.7 × 0.5² = 16.84 Kg

The atomic mass of an detail is described because the weighted common mass of that detail’s is False

Atomic mass (Also referred to as Atomic Weight, even though this denomination is incorrect, for the reason that mass is belongings of the frame and the burden relies upon at the gravity) Mass of an atom similar to a positive chemical detail).  mean "unit of atomic mass". This unit is likewise typically referred to as Dalton (Da) in honor of the English chemist John Dalton.

It is equal to 1 12th of the mass of the nucleus of the maximum ample isotope of carbon, carbon-12. It corresponds more or less to the mass of a proton (or a hydrogen atom). It is abbreviated as "uma", even though it could additionally be located with the aid of using its English acronym "amu" (Atomic Mass Unit). However, the advocated image is simply "u".

The atomic masses of chemical factors are typically calculated using the weighted average of the masses of the exceptional isotopes of each detail while taking into account the relative abundance of each one. This is the cause of the discrepancy between an element's atomic mass in umas and the range of nucleons that contains the nucleus of its maximum uncommon place isotope.

To know more about atomic mass , visit :

https://brainly.com/question/13672279

#SPJ4

The element which release most energy while gaining an electron is Chlorine.

Chlorine has a higher affinity for electrons than fluorine does, despite the fact that fluorine is intended to have halogens with higher electron affinity .Therefore, chlorine has the highest electron affinity among the all elements in the group.

When an electron is added to a neutral atom to create a negatively charged ion, how much energy is released. Only a few chemical elements, primarily the halogens, have values available since it is difficult to determine the affinities of atom’s electrons.

Low melting and boiling points characterize the halogens. They all react with hydrogen to create acids. Salts are easily formed when they react with metals. Their outer shell contains seven valence electrons.

To learn more about electron affinity, refer this link

https://brainly.com/question/1450671

#SPJ4

The tributary region of the beam CD is indicated by the shaded area. The tributary area of the beam CD has a width of B=3.6m. The CD beam's tributary area is 7.5 meters long. The concrete slab has a thickness of H=100mm.

The goal of structural analysis is to forecast how a structure will react to a set of arbitrary external loads.

The goal of the structural analysis is to determine how changes to the structure as a whole or in part will affect the ultimate limit states and service ability limit states as described in Section 8.

Establishing a sensible distribution of internal forces, moments, stresses, strains, and displacements over the entire or a portion of a structure is the goal of a structural study.

To learn more about structural analysis, visit:

https://brainly.com/question/28152298

#SPJ4

If a pendulum clock is running fast, the length of the pendulum should be increased to correct the problem.

The time period of a simple pendulum clock is:

 T= 2π√(l/g)

Where,

l is the length of the simple pendulum and g is the gravity.

From the formula, we can see that the time period is directly proportional to the square root of the length. Decreasing the length will decrease the time period and the clock will move faster.

In order to slow the clock, increase the length of the pendulum to increase the time period.

If you need to learn more about simple pendulum, click here

https://brainly.com/question/2292218?referrer=searchResults

#SPJ4

Ecosystem A has more diversity, because it has greater species evenness than Ecosystem B.

All the organisms and the physical setting they interact with make up an ecosystem. The nutrient cycles and energy flows connect these biotic and abiotic elements. Photosynthesis is how energy reaches the system and is absorbed by plant tissue.

Forest Ecosystem.

Grassland Ecosystem.

Tundra Ecosystem.

Desert Ecosystem.

Fundamentally, the way an ecosystem works is through the transfer of nutrients and energy up the food chain. The planet's plant and animal life, as well as the breakdown of organic matter and the creation of biomass, are all supported by these exchanges.

To know more about ecosystem :

https://brainly.com/question/13979184

#SPJ9

There are distinct emission lines indicating discrete energy levels.

When a component transmits energy in the form of radiation, a spectrum of colors is produced on a photographic plate. This spectrum can be both continuous and discrete. The spectrum persists without distinction between two regions in a continuous spectrum. This represents the uninterrupted radiation emission and thus the uninterrupted emission of energy.

The line spectrum, on the other hand, is made up of discrete and sharp lines that show the emission of radiation in a specific amount over a specific time period, with a break between emission. As a result, the line spectra supports energy quantization.

To learn more about energy quantization: brainly.com/question/14327721

#SPj4

Answer:the magnitude of the hikers resultant displacement

Explanation: