50POINTS!
Using the ideal gas law (PV=nRT) solve for the missing. Variable. R= 0.08206atm*L/mol*k

If 22.9L of an ideal gas was collected at STP. How many moles of the gas were present?

A. 1.02 moles
B. 5.99 moles
C. 3.05 moles
D. 2.74 moles

Answer:

yes

Explanation:

Answer:

Pressure is often defined as a measure of force applied on an area, or over a unit area.

Explanation:

Answer:

3

Explanation:

Answer:C. They can be produced easily in areas with geothermal activity.

D. The land can be used for other purposes while supplying energy.

Explanation:

Both c and d are correct

It is easier to switch to solar and wind energy as compared to other alternative energy sources because they can be produced easily in areas with geothermal activity and can be used for other purposes while supplying energy.

Solar energy is any type of energy generated by the sun. Solar energy can be harnessed directly or indirectly for human use.

Generating energy that produces no greenhouse gas emissions from fossil fuels and reduces some types of air pollution.

Diversifying energy supply and reducing dependence on imported fuels. Creating economic development and jobs in manufacturing, installation, and more.

Hence, options C and D are correct.

Learn more about the solar energy here:

https://brainly.com/question/23611169

#SPJ2

Answer:

Cu    +    2AgNO₃  →   2Ag    +    Cu(NO₃)₂

Explanation:

The reactants are:

         Copper metal  = Cu

         Silver nitrate  = AgNO₃

The products are:

          Silver metal  = Ag

           Copper (II) nitrate  = Cu(NO₃)₂

So, the reaction equation is given as;

      Cu    +    2AgNO₃  →   2Ag    +    Cu(NO₃)₂

This is a single displacement reaction

Answer: Vibråtory movement.

Explanation: when particles bounce against each other the friction creates thermal energy. Think about what happens when you rub your hands together and they get warmer, that the friction between your hands making thermal energy.

Answer:

See explanation

Explanation:

Given that;

E = hc/λ

h = 6.63 * 10^-34 Js

c = 3 * 10^8 ms-1

λ = ?

E = 3.978 * 10^-19 J

λ = hc/E

λ = 6.63 * 10^-34 * 3 * 10^8 /3.978 * 10^-19

λ = 19.89 * 10^-26/3.978 * 10^-19

λ = 5 * 10^-7 m The colour is green

2. E = hc/λ

E=  6.63 * 10^-34 * 3 * 10^8 /1000 * 10^-9

E = 1.989 * 10^-19 J

But

E = hf

f = E/h

f =  1.989 * 10^-19/6.63 * 10^-34

f = 3 * 10^14 Hz The radiation is infrared

3. E = hc/λ

λ= hc/E

λ= 6.63 * 10^-34 *  3 * 10^8 /2.0 * 10^-14

λ= 995 * 10^-14 m This is gamma radiation

4. E = hc/λ

E=6.63 * 10^-34 *  3 * 10^8 /620 * 10^-9

E = 3.2 * 10^-19 J

5. E = hf

E= 6.63 * 10^-34 * 2 * 10^17

E = 1326 * 10^-19 J

E = hc/λ

λ= hc/E

λ= 6.63 * 10^-34 * 3 * 10^8 /1326 * 10^-19 = 15 * 10^-9

This is ultraviolet radiation

Answer:

0.768g of Fe are in the tablet = 38.4% by mass of Fe in the tablet

Explanation:

The balanced redox equation of Fe²⁺ with KMnO₄ in acidic medium is:

5Fe²⁺ + MnO₄⁻ + 8H⁺ → 5Fe³⁺ + Mn²⁺ + 4H₂O

Where 5 moles of Fe²⁺ react per mole of KMnO₄

The moles required of KMnO₄ are:

27.50cm³ * (1dm³ / 1000cm³) = 0.0275dm³ * (0.100mol / dm³) = 0.00275mol KMnO₄

Moles of Fe²⁺ are:

0.00275mol KMnO₄ * (5 moles Fe²⁺ / 1mol KMnO₄) = 0.01375moles of Fe²⁺

In grams (Molar mass Fe: 55.845g/mol):

0.01375moles of Fe²⁺ * (55.845g/mol) =

And percentage is:

0.768g Fe / 2.000g * 100 =

Answer:

7x10⁴.

Explanation:

Hello!

In this case, when rounding big number to a representation with less significant figures than it, we need to make sure we remove the spare figures and round up whether the next digit is five or more.

In such a way, for 74,000, we notice that 4 is not enough to round up the 7, that is why the number would contain a 7 only; moreover, to get rid of the thousand places, we need to introduce an exponent in 4 places, which means that the result would be:

7x10⁴.

Best regards!

Answer:

19.47%

Explanation:

[tex]\frac{1.29}{1.29+5.35}[/tex]

Please recheck, for this answer may not be correct

Answer: a) [tex]1.7\times 10^{-4}[/tex]

b) [tex]3.4\times 10^{-4}[/tex]

Explanation:

The reaction is :

[tex]2N_2O_5(g)\rightarrow 4NO_2(g)+O_2(g)[/tex]

Rate = Rate of disappearance of [tex]N_2O_5[/tex] = Rate of appearance of [tex]NO_2[/tex]

Rate =  [tex]-\frac{d[N_2O_5]}{2dt}[/tex] = [tex]\frac{d[NO_2]}{4dt}[/tex]

Rate of disappearance of [tex]N_2O_5[/tex] = [tex]\frac{\text {change in concentration}}{time}[/tex] = [tex]\frac{0.100-0.066}{200-0}=1.7\times 10^{-4}[/tex]

a) Rate of disappearance of [tex]N_2O_5[/tex] = [tex]-\frac{d[N_2O_5]}{2dt}[/tex]

Rate of appearance of [tex]NO_2[/tex] = [tex]\frac{d[NO_2]}{4dt}[/tex]

b) Rate of appearance of [tex]NO_2[/tex] =  [tex]\frac{d[NO_2]}{dt}=2\times 1.7\times 10^{-4}}=3.4\times 10^{-4}[/tex]

A) Find the rate of disappearance of [tex]N_2O_5[/tex] from t = 0 s to t = 200s

[tex]Rate = \frac{1}{2}(\frac{-\delta N_2O_5}{\delta t})\\\\Rate = -\frac{1}{2}(\frac{0.066 - 0.100}{200 - 0})\\\\Rate = 8.5*10^{-5}[/tex]

B) Find the rate of appearance of [tex]NO_2[/tex] from t = 0 s to t = 200s

According to rate law,

[tex]\frac{1}{2}(\frac{-\delta N_2O_5}{\delta t}) = \frac{1}{4}(\frac{\delta NO_2}{\delta t})\\\\8.5*10^{-5} = \frac{1}{4}(\frac{\delta NO_2}{\delta t})\\\\\frac{\delta NO_2}{\delta t} = 4 * 8.5*10^{-5}\\\\Rate = 3.4*10^{-4}[/tex]

For more information on rate of disappearance

https://brainly.com/question/20708865?referrer=searchResults

Answer:

a solution color becoming less intense  due to dilution- is not an evidence of a chemical reaction

bubbles (gas formation) - evidence of a chemical reaction

explosion or fire - evidence of a chemical reaction

changes in color- evidence of a chemical reaction

precipitation- evidence of a chemical reaction

changes in temperature - evidence of a chemical reaction

a solid liquifying - is not an evidence of a chemical reaction

solution colors mixing - is not an evidence of a chemical reaction

Explanation:

A chemical change is not easily reversible and yields new substances. It is often accompanied by a loss or gain of heat.

In the answer section, i have shown some evidences that lead us to conclude that a chemical reaction has taken place. The occurrence of a chemical change often goes with the formation of new substances as earlier stated and any of these signs may accompany the process.

For instance, when a metal is dropped in dilute acid solution, bubble of hydrogen gas indicates that a chemical reaction has taken place.

Answer:

One electron per single hydrogen atom.

Explanation:

Hello!

In this case, given the reaction:

[tex]H_2+O_2\rightarrow H_2O[/tex]

Whereas we can identify the following half-reaction for hydrogen:

[tex]H_2^0\rightarrow H_2^+[/tex]

Whereas we see that each single hydrogen atom gains one electron in order to go from 0 to +1, which is also related to an oxidation half-reaction.

Best regards!

Answer:

Incomplete combustion produces carbon monoxide (CO), a toxic gas.

Explanation:

Combustion is the rapid chemical reaction of oxygen in the air or direct oxygen, which is defined as oxidizer, with the different elements that make up the fuel (mainly carbon (C) and hydrogen (H)). These chemical reactions release energy producing local increases in temperature, which causes a flow of heat to the outside.

In other words, on the one hand you have the fuel, which is the substance that oxidizes and that you can find in a solid, liquid or gaseous state and which is made up mostly of carbon and hydrogen.

The oxidizer, for its part, is the substance that oxidizes the fuel, and it is generally the oxygen found in the air.

Certain amounts of oxidizer and fuel must come into contact for combustion to occur.

Incomplete combustion occurs when part of the fuel does not fully react. Incomplete combustion produces carbon monoxide (CO), a toxic gas.

Which of the statements about liquids and gases are true?

The particles in liquids and gases can move past one another freely.

Which of the statements about liquids and gases are true?

Both liquids and gases have a definite volume.

The particles in liquids and gases can move past one another freely

Both liquids and gases have a definite shape.

Neither liquids nor gases have a definite shape.

The particles in liquids and gases can move past one another freely.

Answer:

Na sodium or Rb rubidium

Explanation:

Because Na is present in first group all members of group 1 have 1 electron in valence shell and show similar properties.

Answer:

yes because of fluorine has higher electronegativity

Answer:

Gravitational force between two objects depends on: a. The weight of the objects c. The mass of each object b. The distance between the objects d. Both b and c Please select the best answer from the choices provided A B C D

✓d

Honestly, its based on your preference but the best recommended one would be loam. I use loam too, and it is really good for growing the plants.

:)

Answer:

A. Theoretical yield of C is 9.03 g

B. Mass of B consumed is 5.53 g

Explanation:

A. Determination of the theoretical yield of C.

Actual yield of C = 6.5 g

Percentage yield of C = 72.%

Theoretical yield of C =?

Percentage yield = Actual yield /Theoretical yield × 100

72% = 6.5 / Theoretical yield

72 / 100 = 6.5 / Theoretical yield

Cross multiply

72 × Theoretical yield = 100 × 6.5

72 × Theoretical yield = 650

Divide both side by 72

Theoretical yield = 650 / 72

Theoretical yield = 9.03 g

Therefore, the theoretical yield of C is 9.03 g

B. Determination of the mass of B consumed.

We'll begin by writing the balanced equation for the reaction. This is illustrated below:

A + B —> C

Mass of A = 3.5 g

Mass of C = 9.03 g

Mass of B =?

A + B = C

3.5 + B = 9.03

Collect like terms

B = 9.03 – 3.5

B = 5.53 g

Thus, the mass of B consumed in the reaction is 5.53 g

The original concentration : 800%

Given

Diluted 1/40

Final concentration 20%

Required

The original concentration

Solution

Dilution is the process of adding solvent to get a more dilute solution.

The moles(n) before and after dilution are the same.

Can be formulated :

 n₁ = n₂

M₁.V₁ = M₂.V₂

diluted 1/40(dilution factor)⇒ V₁/V₂=1/40⇒V₂/V₁=40

M₂ = 0.2(20%)

Input the value for M₁ :

M₁=M₂ x (V₂/V₁)

M₁ = 0.2 x 40

M₂ = 8(800%)

=

Answer:

C = 18.29 g  

Explanation:

Given data:

Mass of beryllium needed = ?

Mass of nitrogen = 18.9 g

Solution:

Chemical equation:

3Be + N₂    →    Be₃N₂

now we will calculate the number of moles of nitrogen:

Number of moles = mass/molar mass

Number of moles = 18.9 g/ 28 g/mol

Number of moles = 0.675 mol

Now we will compare the moles of nitrogen and Be from balance chemical equation.

                     N₂        :       Be        

                       1          :       3

                  0.675       :      3/1×0.675 = 2.03 mol

Number of moles of Be needed are 2.03 mol.

Mass of Beryllium:

Mass = number of moles × molar mass

Mass = 2.03 mol ×   9.01 g/mol

Mass = 18.29 g  

Answer:

Comvection

Explanation:

The movement causes the density to rise and therefore transfer more heat

Answer:

a. True.

Explanation:

Hello!

In this case, since dullness and smoothness are characteristic of materials that are not able to conduct the electricity, as they do not provide an appropriate pathway for the electrons to move around because of their amorphous structure, we realize the answer is a. True.

On the contrary, a lustrous and robust solid, is actually able to conduct electricity because it provides the pathway for the electron movements and therefore to conduct electricity.

Best regards!

Answer:

Explanation:

H₃PO₄ + 3NaOH = Na₃PO₄ + 3 H₂O.

1 mole     3 mole

22.85 mL of the standardized 0.0995M NaOH solution will contain

.0995 x .02285 moles of NaOH

= 22.7357 x 10⁻⁴ moles of NaOH

3 moles of NaOH reacts with 1 mole of H₃PO₄

22.7357 x 10⁻⁴ moles of NaOH reacts with 1 x 22.7357 x 10⁻⁴  / 3 mole of H₃PO₄

= 7.5785 x 10⁻⁴ moles of H₃PO₄

7.5785 x 10⁻⁴ moles of H₃PO₄  is contained in 10 mL or 10⁻² L

molarity of H₃PO₄ solution = 7.5785 x 10⁻⁴ / 10⁻²

= 7.58 x 10⁻² M

= .0758 M .