1. Earthquakes and Eruptions (volcanoes)
2. Divergent plate boundary
3. Apart from a widening valley, it equally contributes to steep mountain sides spreading. A mid-oceanic ridge is naturally produced if two oceanic plates naturally start moving away from each other.
Explanation:1. When a divergent boundary occurs beneath oceanic lithosphere, the rising convection current below lifts the lithosphere, producing a mid-ocean ridge. Extensional forces stretch the lithosphere and produce a deep fissure. When the fissure opens, pressure is reduced on the super-heated mantle material below. It responds by melting, and the new magma flows into the fissure. The magma then solidifies and the process repeats itself.
2. When two plate diverge from each other also known as divergent (di-apart, vergere- to inclined) plate margin .
Two plate diverge along oceanic ridges where new lithosphere is created.
Now come to the main point: Geological Features
When two oceanic plate diverge then new sea floor is created by a process called sea floor spreading and features like Mid oceanic ridges, volcanoes & Young lava flows forms. Ex. East Pacific Rise, Mid-Adlantic Ridge.
When two continental plates diverge by continental rifting then features like Rift valley, volcanoes are found. Ex of continent continent -East Africa rift vally, Red sea.
3. The major difference between different types is what type of plate the divergent boundary is between. If the boundary is found between two continental plates you are left with a rift valley. ... If two oceanic plates begin moving away from each other it creates a mid-oceanic ridge.
Thank You!
Please Mark Me Brainliest!
Have a good day studying!
how do you determine the total number of Valence electrons that are used to make a particular lewis structure for a compound or an ion?
Answer:
The number of valence electrons of an element can be determined by the periodic table group (vertical column) in which the element is categorized.
Explanation:
Hope it helps!
1.-Una solución de 1600 ml contiene 9,5 gramos de agua oxigenada H2O2 Calcular el porcentaje peso volumen del soluto.
✞➪name the macromolecules that are chosen as drug targets.♔♔♔
Answer:
The macromolecules chosen as drug targets are carbohydrates, lipids, proteins, and nucleic acids.
Explanation:
Hope this helps you. Have a nice day. Please mark as the brainliest. It helps a lot. ^_^
Letter C shows that some of the heat rising from the earth's surface is trapped by gases in the atmosphere and reflected back to earth. This is known as what?
Question 3 options:
Coriolis Effect
Solar Flares
Green House Effect
Windshield Effect
Answer:
green house effect
Explanation:
it works like a green house
Consider a hypothetical gas which has the following Van der Waals constants:
a = 2.34 L2 bar mol-2
b = 0.0 L mol-1
Under conditions of very high pressures, what would you predict about the experimental volume of the gas?
The volume would be lower than predicted by the Ideal Gas Law
The volume would be higher than predicted by the Ideal Gas Law
The volume would be exactly the same as predicted by the Ideal Gas Law
Under conditions of very high pressures, the volume would be lower than predicted by the Ideal Gas Law.
According to the kinetic theory of gases, a gas spreads out to fill the volume of the container holding it. Hence a gas does not have a definite volume due to the fact that there is no inter-molecular interaction between gas molecules.
When the gas is subjected to very high pressure, inter-molecular interactions become significant leading to a decrease in the volume of the gas.
Therefore, when subjected to high pressure, the experimental volume would be lower than predicted by the Ideal Gas Law.
Learn more: https://brainly.com/question/21443108
Given R = 0.0821L⋅atm/mol⋅k, what is the volume of mole of gas at a pressure of 3.12 atm and a temperature of 270K?
A. 69.2 L/mol
B. 86.5 L/mol
C. 22.2 L/mol
D. 7.10 L/mol
Answer:
The answer is d
Explanation:
Answer:
The answer is D
Explanation:
Convert 1.2 Mg into milligrams
Answer:
1200 milligrams
A solid is heated to its melting point and the resulting liquid is heated. Choose the graph below that shows these temperature changes.
Which of the following natural processes will NOT directly result in the formation of sedimentary rock?
A. River Flow
B. Windstorm
C. Metamorphic change
D. Glacial Motion
Answer:
Windstorm Hope it helped brainiest plz and thank you have a great day!!!
Explanation:
Which of the following natural processes will NOT directly result in the formation of sedimentary rock?
B. Windstorm
What does the arrow in chemical equations mean? (PLEASE HELP)
A- Cancels
B- Subtracts
C- Prevents
D- Yields
Answer:
yields
Explanation:
I just did that quiz on k12 8th grade
Answer:
D
Explanation:
TOOK TEST ON K12
In which of Earth's layers are the convection currents?
crust
mantle
inner core
lithosphere
<
Question 9
Element Q is a theoretical nonmetal with atomic number 57. Consider the isotope: Q-110. How
many electrons are in an atom of Q-110 if the atom has a charge of -2?
Answer:
This isotope has 59 electrons giving it a charge of -2.
Explanation:
To find this we have to understand isotope relates to the mass of the nucleus. This isotope has 59 electrons to counter the protons and give it a negative charge.
In an atom, the atomic number is equal to number of electrons , hence element Q has 57 electrons on addition 2 electrons that is -2 charge the number of electrons is 59 electrons.
What is an atom?An atom is defined as the smallest unit of matter which forms an element. Every form of matter whether solid,liquid , gas consists of atoms . Each atom has a nucleus which is composed of protons and neutrons and shells in which the electrons revolve.
The protons are positively charged and neutrons are neutral and hence the nucleus is positively charged. The electrons which revolve around the nucleus are negatively charged and hence the atom as a whole is neutral and stable due to presence of oppositely charged particles.
Atoms of the same element are similar as they have number of sub- atomic particles which on combination do not alter the chemical properties of the substances.
Learn more about atom,here:
https://brainly.com/question/13654549
#SPJ5
An environmental chemist analyzed the effluent (the released waste material) from an industrial process known to produce the compounds carbon tetrachloride (CC14) and benzoic acid (HC7H5O2), a weak acid that has one acidic hydrogen atom per molecule. A sample of this effluent weighing 0.3518 g was shaken with water, and the resulting aqueous solution required 10.59 mL of 0.1546 M NaOH for neutralization. Calculate the mass percent of HC7H5O2 in the original sample.
The mass percent of benzoic acid in the sample is 55.5%.
The equation of the reaction is; HC7H5O2(aq) + NaOH(aq) ----> NaC7H5O2(aq) + H2O(l)
Number of moles of NaOH reacted = concentration × volume
Number of moles of NaOH reacted = 10.59/1000 L × 0.1546 M
Number of moles of NaOH reacted = 0.0016 moles of NaOH
Since the reaction is 1:1, 0.0016 moles of HC7H5O2 reacted also.
Hence, mass of HC7H5O2 = 0.0016 moles × 122 g/mol = 0.1952 g
Mass percent of HC7H5O2 in the original sample = 0.1952 g/ 0.3518 g × 100 = 55.5%
Learn more: https://brainly.com/question/9743981
An unknown compound has the following chemical formula: NO_x
where x stands for a whole number.
Measurements also show that a certain sample of the unknown compound contains of oxygen and of nitrogen.
Write the complete chemical formula for the unknown compound.
Answer:
NO_x
Explanation:
you said it
Which equation represents a chemical reaction
Answer:
A balanced chemical equation represents a chemical reaction that obeys the Law of Conservation of Mass (Matter). It can be thought of as describing how many atoms or molecules of reactants are consumed in order to produce a certain number of atoms or molecules of products.
If you have a density of 3 g/mL and a volume of 10 mL, what is the mass?
Answer:
30 gram
Explanation:
Hope this helps
Brainliest pls ❤️
Sodium chlorate decomposes into sodium chloride and oxygen gas as seen in the equation below.
2NaClO3 --> 2NaCl +3O2
How many moles of NaCl were produced by 10 moles of NaClO3? Round your answer to the nearest whole number.
Answer:
10 moles of sodium chloride
Explanation:
[tex]\sf{}[/tex]
Help please!! I thought it was 374.8 but it keeps saying to check my significant digits
Answer:
ok
Explanation:
i am doing now so
Calculate the osmolarity of a 1.15% (m/v) KBr solution.
Answer:
1) Convert percent (m/V) to molarity
percent (m/V)=1.15 grams/100ml=1.15 g/0.1L=11.5g/L
molarity of KBr=mol/L=g/L *(1mol/molecular weight of KBr)=(11.5g/L) * (1mol/119.0g/mol)=0.0966 mol/L=0.0966M
2) calculation of osmol from mol
In solution, KBr dissociates into two ions K+ and Br- so there are 2 osmol of KBr per mol
3) calculation of osmolarity=molarity*2=0.0966*2=0.193 Osm or Osmolar
Explanation:
brainliest would be appreciated.
Which unit represents speed?
Joules
kilometers per second
miles per hour
newtons
(Pick ONE)
Answer:
1
Explanation:
Answer:
can be SI or also know miles per second.
A lunar eclipse occurs at night and can only occur during what phase of the moon?
New moon
Full moon
Answer:Full moon
Hope this helps :)
A lunar eclipse can occur only at full moon.
Explanation:
During a lunar eclipse, Earth comes between the Sun and the Moon, blocking the sunlight falling on the Moon. A total lunar eclipse occurs when the Moon and Sun are on opposite sides of Earth. A partial lunar eclipse happens when only part of Earth's shadow covers the Moon.
Answer:
"Full moon"
A full moon would be needed due to the fact that the sun would need to entirely block it, resulting in a solar eclipse. Hence, the answer is "Full moon".
1. Your parents go through McDonalds drive-thru and get you a Big Mac and Coke. You
take the lid off your Coke because it is too full and you need to sip some of the Coke so
it won't spill. After doing so, you forget to put the lid on. Then, a car pulls out in front of
you and your mom yells, "Look out!" You hold your cup still so it won't spill. However,
the coke still spills out. Describe which of Newton's laws you can contribute this to and
why. (textbook pg. 334)
Answer:
because theres a force called gravity
Explanation:
Which tool should Darla and Rob use to measure the force that pulls a car down the map
Answer:
C. A Spring Scale
Explanation:
Using process of elimination, we can quickly decide that a stopwatch and a ruler will not be useful in measuring the force. This leaves us with either the spring scale or a balance scale. A balance scale is used to compare two weights, so this is eliminated. That leaves us with a spring scale. This is because we can attached the spring scale to the car and when we let it go, we can record the force. I hope this helps!
A rectangular block weighs 121g. The dimensions of the block are 9.1cm by 5.4cm by 2.3cm. From this data, what us the density of the block in g/mL? Will tge block float or sink in water and how do you know? Show all your work on a piece of paper.
The density of the rectangular block is 1.07 g/mL.
From the question, we have the mass of the rectangular block as 121g
The dimensions of the block are given as follows;9.1cm by 5.4cm by 2.3cm
So we have the volume of the block as; 9.1cm × 5.4cm × 2.3cm = 113 cm^3
Let us recall that; 1 cm^3 = 1 mL, so 113 cm^3 = 113 mL
Having said that, we must also remember that;
Density = Mass/volume
Density = 121g/113 mL
Density = 1.07 g/mL
Learn more: https://brainly.com/question/9196460
You have a gas sample of carbon dioxide at 298 K. If the pressure is 0.827 atm what is the pressure in mmhg
Answer:
628.520 mmHg
Explanation:
1 atm = 760 mmHg
[tex](760 \div 1) \times 0.827[/tex]
The pressure of 0.827 atm in mmHg is 628.52 mmHg
Pressure has various units of measurement such as atmosphere (atm), pascal, mmHg, Newton per square metre (N/m²) etc. These units can be converted from one to the other.
Considering the question given above, we can convert 0.827 atm to mmHg as illustrated below:
1 atm = 760 mmHg
Therefore,
0.827 atm = 0.827 × 760
0.827 atm = 628.52 mmHg
Thus, 0.827 atm is equivalent to 628.52 mmHg
Learn more: https://brainly.com/question/9587688
Which properties cause chemical reactions?
chemical properties
chemical and physical properties
physical properties
neither chemical nor physical properties
Answer:
Chemical Properties
Explanation:
Answer: chemical properties
Explanation: chemical bonds between atoms are formed or broken.
The table shows the densities of Earth's layers.
Which of these is most likely the density of Earth's mantle?
1.5-2.2 g/cm3
3.4-5.6 g/cm3
10.6-12.4 g/cm3
13.5-15.2 g/cm3
Answer:3.4 - 5.6
Explanation:
You have 150.0 mL of a 0.415 M solution of Ce(NO₃)₄.
a) What mass (in grams) of Ce(NO₃)₄ would be required to make the solution?
B) What is the concentration of the nitrate ions in the solution ?
C) If the original solution was diluted to 350.0 mL, what would be the new concentration of the Ce(NO₃)₄ in the solution?
A. The mass (in grams) of Ce(NO₃)₄ that will be required to make the solution is 24.16 g
B. The concentration of the nitrate ions in the solution is 1.66 M
C. The new concentration of the Ce(NO₃)₄ solution is 0.178 M
We'll begin by calculating the number of mole of Ce(NO₃)₄ in the solution.
Molarity = 0.415 M
Volume = 150 mL = 150 /1000 = 0.15 L
Mole of Ce(NO₃)₄ =?Mole = Molarity × Volume
Mole of Ce(NO₃)₄ = 0.415 × 0.15
Mole of Ce(NO₃)₄ = 0.06225 moleA. Determination of the mass of Ce(NO₃)₄ required to make the solution.
Mole of Ce(NO₃)₄ = 0.06225 mole
Molar of Ce(NO₃)₄ = 140.12 + 4[14 + (16×3)]
= 140.12 + 4[14 + 48]
= 140.12 + 4[62]
= 140.12 + 248
= 388.12 g/mol
Mass of Ce(NO₃)₄ =?Mass = mole × molar mass
Mass of Ce(NO₃)₄ = 0.06225 × 388.12
Mass of Ce(NO₃)₄ = 24.16 gTherefore, 24.16 g of Ce(NO₃)₄ is required to make the solution.
B. Determination of the concentration of the nitrate ion, NO₃¯ in the solution.
In solution, Ce(NO₃)₄ will dissociate as follow:
Ce(NO₃)₄ (aq) —> Ce⁴⁺(aq) + 4NO₃¯(aq)
From the balanced equation above,
1 mole of Ce(NO₃)₄ contains 4 moles of NO₃¯
Therefore,
0.415 M solution of Ce(NO₃)₄ will contain = 0.415 × 4 = 1.66 M NO₃¯
Thus, 1.66 M of the nitrate ion, NO₃¯, is present in the solution.
C. Determination of the new concentration of the Ce(NO₃)₄ solution.
Volume of stock solution (V₁) = 150 mL
Molarity of stock solution (M₁) = 0.415 M
Volume of diluted solution (V₂) = 350 mL
Molarity of diluted solution (M₂) =?
M₁V₁ = M₂V₂0.415 × 150 = M₂ × 350
62.25 = M₂ × 350
Divide both side by 350
M₂ = 62.25 / 350
M₂ = 0.178 MTherefore, the new concentration of the Ce(NO₃)₄ solution is 0.178 M
Learn more: https://brainly.com/question/24848714
What is the word "love" really mean to someone? when do you know when the time is right
The penalty for not voting in New South Wales is a $55 fine. You must respond within 28 days of the issue date of the notice. You will have four options: If you voted, you can provide details of where and when using our non-voter self-service portal.
Why can’t we reach “absolute zero”?