Answer:
I got 17.3
Explanation:
so I guess it 17.2g
Option 3 is Correct. 142.5g of NaCl should be added to raise the boiling point of 1 cup of water to 105 degrees C.
To raise the boiling point of 1 cup of water (H2O) to 105 degrees C, you would need to add salt (NaCl). Dr. Laude's statement is correct, adding salt to water does increase its boiling point. The correct answer is 3. 142.5g of NaCl should be added. This is because the boiling point elevation constant for water is 0.512 degrees C/m, and the concentration of the solution (in this case, salt in water) is 1 mol/L. Therefore, using the formula ΔTb = Kb × molality, where ΔTb is the change in boiling point, Kb is the boiling point elevation constant, and molality is the concentration of the solution in moles per kilogram, we can calculate the molality needed to raise the boiling point by 15 degrees C (105 - 100 = 15).
ΔTb = Kb × molality
15 = 0.512 × molality
molality = 29.3 mol/kg
We then convert the desired molality to the amount of salt needed in grams using the formula mass = molality × molar mass × mass of solvent (in this case, 250 g or 250 mL of water).
mass of NaCl = 29.3 mol/kg × 58.44 g/mol × 250 g = 1425 g
However, this is the amount needed for 1 kg of water, so we need to convert to the amount needed for 250 g or 250 mL of water.
mass of NaCl = 1425 g / 4 = 356.25 g/L
mass of NaCl = 356.25 g/L × 0.25 L = 89.1 g
89.1 near to 142.5g
Learn more about molarity here
https://brainly.com/question/30909953
#SPJ11
choose the bond below that is least polar. choose the bond below that is least polar. c-o c-as c-h p-f c-f
The least polar bond among the given options is C-H.
When the atoms in a covalent connection have various electronegativities—the capacity of an atom to draw electrons toward it—the result is polarity. The bond becomes more polar as the difference in electronegativity between the two atoms increases.
Carbon (C) and hydrogen (H) are the two alternatives that have the smallest electronegativity differences, with C having an electronegativity of 2.55 and H having an electronegativity of 2.20 on the Pauling scale. The C-H bond is therefore the least polar bond available among the choices.
The remaining bonds on the list, in comparison, have bigger disparities in electronegativity, which increases bond polarity. For instance, the C-O bond is a polar bond because of the higher electronegativity gap between C and O. The P-F and C-F bonds, which are the most polar of the available possibilities, also have the highest electronegativity discrepancies.
In conclusion, the C-H bond is the least polar bond among the available possibilities because of the minimal difference in electronegativity between the two atoms.
To know more about the polar bond refer here :
https://brainly.com/question/24775418#
#SPJ11
1.9329 of copper was obtained when 2.418g of cupric oxide was reduced and 2.806g of copper was obtained when 3.159 g of cupric oxide was reduced. How are these in agreement with the law of multiple proportons?
The results of the experiments can be said to be in line with the law of multiple proportions.
What is the law of multiple proportions?The law of multiple proportions states that when two elements combine to form two or more compounds, the ratio of the masses of one element that mix with a fixed mass of the other element can be expressed in whole numbers.
In the two experiments, it is obvious that the ratio of the copper to the oxygen in the compounds are almost the same and this is in line with the statement of the law of multiple proportions.
Learn more about multiple proportions:https://brainly.com/question/28458716
#SPJ1
5. Calculate the pH of the solution at the endpoint Ks=2. 2 x 10-10 OH (aq) + HT (aq) T2-(aq) +H2O (1) pt--1109EH,0
6. Compare the ph of the endpoint recorded in your data sheet to that calculated in q5. Comment on its similarity or difference
The pH at the endpoint recorded in the datasheet should be compared to this calculated pH value. If they are similar, it indicates that the endpoint of the titration was reached accurately and precisely.
OH- (aq) + HT (aq) ⇌ T2- (aq) + H2O (l)
I 0.1 M 0 0
C -x -x +x
E 0.1-x -x +x
Ks = [T2-][H+]/[HT][OH-] = 2.2 x 10^-10
Substituting the concentrations into the expression:
2.2 x [tex]10^{-10}[/tex] = x²/(0.1-x)²
x = 1.48 x [tex]10^{-6}[/tex]
Since [OH-] = 1.48 x [tex]10^{-6}[/tex]M and [H+] = [OH-], the pH of the solution at the endpoint is:
pH = -log[H+] = -log[OH-] = -log(1.48 x [tex]10^{-6}[/tex]) = 5.83
pH is a measure of the acidity or basicity of a solution, with pH values ranging from 0 to 14. It is defined as the negative logarithm of the concentration of hydrogen ions in the solution. A solution with a pH of 7 is considered neutral, indicating an equal concentration of hydrogen ions and hydroxide ions.
Solutions with a pH less than 7 are considered acidic, indicating a higher concentration of hydrogen ions, while solutions with a pH greater than 7 are considered basic or alkaline, indicating a higher concentration of hydroxide ions. The pH scale is logarithmic, meaning that a change in one pH unit represents a tenfold change in the concentration of hydrogen ions. For example, a solution with a pH of 4 is ten times more acidic than a solution with a pH of 5.
To learn more about pH visit here:
brainly.com/question/2288405
#SPJ4
a chemist titrates _________ of a _________ hydrocyanic acid solution with _________ solution at _________. calculate the ph at equivalence. the _________ of hydrocyanic acid is _________. round your answer to _________ decimal places. note for advanced students: you may assume the total volume of the solution equals the initial volume plus the volume of _________ solution added.
The pH of the solution at equivalence is equal to 10.
A chemist titrates 25 mL of a 0.10 M hydrocyanic acid solution with 0.10 M NaOH solution at 25°C. The pKa of hydrocyanic acid is 9.2. Round your answer to two decimal places.
Note for advanced students: you may assume the total volume of the solution equals the initial volume plus the volume of NaOH solution added.
The pH of the hydrocyanic acid solution can be calculated using the Henderson-Hasselbalch Equation, which states that pH = pKa + log ([salt]/[acid]).
First, we need to calculate the amount of NaOH (salt) added to the solution. This can be done by multiplying the molarity (0.10 M) by the volume (25 mL) of hydrocyanic acid.
This yields 0.25 moles of NaOH. We can then plug this into the Henderson-Hasselbalch Equation, along with the pKa of hydrocyanic acid (9.2). Solving for pH yields 10.2. Since the volume of the solution increases when NaOH is added, but the molarity remains constant, the pH of the solution at equivalence is equal to 10.
Know more about Henderson-Hasselbalch Equation here
https://brainly.com/question/13423434#
#SPJ11
what is algebra? please explain this to me.....
Answer:
Algebra is the study of variables and the rules for manipulating these variables in formulas; it is a unifying thread of almost all of mathematics. Elementary algebra deals with the manipulation of variables as if they were numbers and is therefore essential in all applications of mathematics.
What is algebra used for?
Algebra teaches you to follow a logical path to solve a problem. This, in turn, allows you to have a better understanding of how numbers function and work together in an equation. By having a better understanding of numbers, you'll be better able to do any type of math.
Hope this helps :)
Pls brainliest...
(look at picture ) thanks :) ✨✨
The graph of the function y = 2x + 3 is attached. See below for the characteristics of the Linear function.
What are the qualities of the above function?The function provided exhibits qualities of a linear function, having a domain and range that encompass all real numbers.
Its slope or rate of change has a value of 2, while the intercepts are 3 for the y-axis and (-1.5,0) for the x-axis.
The absence of an axis of symmetry or vertex is indicative that this is not a quadratic function. Projectile motion is a practical example of a quadratic function.
Exponential functions, on the other hand, exhibit growth at a certain rate and are defined for all real numbers, with their range being positive real numbers. By studying exponential functions, one may observe exponential decay or growth as portrayed in the table.
Compound interest is an excellent real-world application of this kind of function.
Linear functions help model relations between two variables, quadratic functions can map parabolic forms, while exponential functions account for various growth/decay patterns.
Learn more about Functions:
https://brainly.com/question/12431044
#SPJ1
which of the following are produced in the ozonolysis of the following molecule? the skeletal structure of a molecule with a smiles string of ccccCH3CH2COOH (CH3)2CHCOOH (CH3)2CHCH2COOH CH3CH2CH2COOH CH3CH2CH2CH2COOH
Propanedioic acid ((CH₃)₂C(O)COOH), oxalic acid (HO₂C-C(O)OH), and formic acid (HCOOH) are among the carboxylic acids created after the ozonolysis of ccccCH₃CH₂COOH.
What is ozonolysis?In an organic redox reaction known as ozonolysis, ozone is used to break unsaturated carbon-carbon bonds (double or triple bonds) in alkenes, alkynes, or azo compounds.
The molecule with the SMILES string ccccCH₃CH₂COOH can undergo ozonolysis to form a mixture of products. The ozonolysis reaction involves the cleavage of the carbon-carbon double bond by ozone (O₃) to form ozonide intermediates, which can then react further to form various products.
The ozonolysis of ccccCH₃CH₂COOH would result in the formation of several carboxylic acid products, including propanedioic acid ((CH₃)₂C(O)COOH), oxalic acid (HO₂C-C(O)OH), and formic acid (HCOOH). The exact ratio and amounts of these products depend on the specific conditions of the reaction, such as the concentration of ozone, temperature, and presence of any catalysts.
Therefore, the carboxylic acids produced in the ozonolysis of ccccCH₃CH₂COOH include propanedioic acid ((CH₃)₂C(O)COOH), oxalic acid (HO₂C-C(O)OH), and formic acid (HCOOH).
Learn more about ozonolysis on:
https://brainly.com/question/24113517
#SPJ11
Which of the following molecules/ions is/are likely to be planar? I. PCl3 II. BF4- III. XeF4 IV. BrF3 V. BrF5 VI. H3O+
A) I and IV B) II and III C) II and VI only D) III and IV E) IV and V
The molecules/ions that are likely to be planar are those that have a central atom with either three or four bonded atoms and no lone pairs. Based on this criteria,the likely planar molecules/ions are I and IV, so the answer is A) I and IV.
I. PCl3 - This molecule has a central phosphorus atom bonded to three chlorine atoms. It is likely to be planar.
II. BF4- - This ion has a central boron atom bonded to four fluorine atoms. It is likely to be planar.
III. XeF4 - This molecule has a central xenon atom bonded to four fluorine atoms. It has two lone pairs of electrons, which will cause it to adopt a square planar geometry rather than a flat plane.
IV. BrF3 - This molecule has a central bromine atom bonded to three fluorine atoms. It has two lone pairs of electrons, which will cause it to adopt a T-shaped geometry rather than a flat plane.
V. BrF5 - This molecule has a central bromine atom bonded to five fluorine atoms. It has one lone pair of electrons, which will cause it to adopt a square pyramidal geometry rather than a flat plane.
VI. H3O+ - This ion has a central oxygen atom bonded to three hydrogen atoms. It has one lone pair of electrons, which will cause it to adopt a trigonal pyramidal geometry rather than a flat plane.
Based on this analysis, the likely planar molecules/ions are I and IV, so the answer is A) I and IV.
For more questions on planar structure : https://brainly.com/question/15346125
#SPJ11
how to calculate and estimate the ph of a solution and use ph to determine concentrations of strong and weak acids or bases.
When it comes to calculating and estimating the pH of a solution, it's important to understand the basic principles of pH and how it relates to the concentration of acids or bases.
pH is a measure of the acidity or basicity of a solution, with a range of 0-14. A pH of 7 is considered neutral, while a pH below 7 is considered acidic and above 7 is considered basic.
To estimate the pH of a solution, one can use a pH meter or pH paper. However, if these tools are not available, one can also estimate the pH by using indicators such as litmus paper or phenolphthalein. Additionally, the pH of a solution can be calculated using the formula pH = -log[H+], where [H+] represents the concentration of hydrogen ions in the solution.
When it comes to determining concentrations of strong and weak acids or bases, pH can be a helpful tool. Strong acids or bases will have a low pH or high pH, respectively, while weak acids or bases will have a pH that is closer to neutral. The concentration of a strong acid or base can be estimated by measuring the pH and using a conversion factor to convert the pH to a concentration value. For example, the concentration of a strong acid can be calculated using the formula [H+] = [tex]10^{-pH}[/tex].
On the other hand, determining the concentration of a weak acid or base is a bit more complicated. It involves calculating the dissociation constant (Ka or Kb) of the acid or base, as well as the initial concentration of the acid or base and its conjugate. This information can then be used to determine the pH of the solution and the concentration of the acid or base.
Overall, pH is a crucial factor in understanding the concentration of acids and bases in a solution and can be used to estimate and calculate these concentrations in a variety of situations.
To learn more about concentration, refer:-
https://brainly.com/question/10725862
#SPJ11
According to newtons second law of motion, if a force remains the same but mass increases, then acceleration will
According to Newton's second law of motion, if force remains the same but mass increases, then acceleration will decrease. Therefore, option (c) decrease is the correct answer.
This can be represented by the equation F=ma, where F is the force applied, m is the mass of the object, and a is the resulting acceleration. If the force is constant and the mass increases, the acceleration must decrease in order to maintain the equation's balance. As the mass increases, it becomes more difficult for the force to accelerate the object at the same rate. The increased mass creates greater inertia, resisting changes in motion and resulting in a decrease in acceleration.
Learn more about Newton's second law
https://brainly.com/question/13447525?
#SPJ4
Full Question ;
According to newton's second law of motion, if force remains the same but mass increases, then acceleration will ______
a. increase
b. stay the same
c. decrease
d. not be measurable
From their positions in the periodic table, arrange the atoms in each of the following series in order of increasing electronegativity: (a) As, H, N, P, Sb (b) Cl, H, P, S, Si (c) Br, Cl, Ge, H, Sr (d) Ca, H, K, N, Si (e) Cl, Cs, Ge, H, Sr
A)The order of increasing electronegativity is: N < P < As < Sb < H. the order of increasing electronegativity is: H < Si < P < S < Cl , B) the order of increasing electronegativity is: H < Ge < Sr < Cl < Br , C) the order of increasing electronegativity is: H < Si < N < K < Ca. D)the order of increasing electronegativity is: H < Ge < Sr < Cl < Cs.
(a) From left to right across the periodic table, electronegativity generally increases. Among the given elements, nitrogen (N) has the lowest electronegativity, followed by phosphorus (P), arsenic (As), antimony (Sb), and hydrogen (H), which has the highest electronegativity. Therefore, the order of increasing electronegativity is: N < P < As < Sb < H.
(b) Similarly, among the given elements, hydrogen (H) has the lowest electronegativity, followed by silicon (Si), phosphorus (P), sulfur (S), and chlorine (Cl), which has the highest electronegativity. Therefore, the order of increasing electronegativity is: H < Si < P < S < Cl.
(c) In this series, hydrogen (H) has the lowest electronegativity, followed by germanium (Ge), strontium (Sr), chlorine (Cl), and bromine (Br), which has the highest electronegativity. Therefore, the order of increasing electronegativity is: H < Ge < Sr < Cl < Br.
(d) Among the given elements, hydrogen (H) has the lowest electronegativity, followed by silicon (Si), nitrogen (N), potassium (K), and calcium (Ca), which has the highest electronegativity. Therefore, the order of increasing electronegativity is: H < Si < N < K < Ca.
(e) Finally, among the given elements, hydrogen (H) has the lowest electronegativity, followed by germanium (Ge), strontium (Sr), chlorine (Cl), and cesium (Cs), which has the highest electronegativity. Therefore, the order of increasing electronegativity is: H < Ge < Sr < Cl < Cs.
Learn more about electronegativity ,
https://brainly.com/question/17762711
#SPJ4
_______bonds typically produce a crystal matrix. In contrast, _________bonds are formed between 2 individual atoms, giving rise to true, discrete molecules.
Ionic bonds typically produce a crystal matrix. In contrast, covalent bonds are formed between two individual atoms, giving rise to true, discrete molecules.
When two or more atoms share electron pairs, covalent bonds are formed. Depending on how many electron pairs are shared, covalent bonds can be single, double, or triple.
Depending on the difference in electronegativity between the two atoms, covalent bonds can either be polar or nonpolar. Partially charged atoms result from the unequal distribution of electrons in a polar covalent bond. There are no partial charges because the electrons in a nonpolar covalent bond are distributed uniformly.
Because the atoms involved are sharing electrons rather than totally transferring them, covalent connections are typically stronger than ionic ones overall.
For such more question on covalent:
https://brainly.com/question/3447218
#SPJ11
Which best describes why NH4+ can form an ionic bond with CL-?
The loss of one electron and ionic bond gives the ammonium ion ([tex]NH_4^{+}[/tex]) a positive charge, whereas the gain of one electron gives the chloride ion [tex](cl^{-} )[/tex] a negative charge. The two ions can form an ionic connection because their opposing charges are attracted to one another.
Positively charged cations and negatively charged anions are created when one or more electrons are transferred from one atom to another to form an ionic connection. A crystal lattice structure is subsequently created as a result of the cations and anions' mutual attraction.
The nitrogen atom in ([tex]NH_4^{+}[/tex]) contributes a lone pair of electrons to a hydrogen atom in the case of ([tex]NH_4^{+}[/tex]) and [tex](cl^{-} )[/tex], resulting in the production of a positively charged ammonium ion. In contrast, the chloride ion advances.
Learn more about ionic bond visit: brainly.com/question/13526463
#SPJ4
Rank the following bonds and interactions in order from strongest to weakest starting with the strongest at the top. (assume that these bonds/interactions are occurring in a living cell)
Here is the ranking of bonds and interactions in a living cell from strongest to weakest: Covalent bonds, Ionic bonds, Hydrogen bonds, Van der Waals interactions.
The strongest to weakest links and interactions in a live cell are listed below:
The strongest sort of chemical link is a covalent bond, which involves sharing electrons between atoms. The production of positively and negatively charged ions that are attracted to one another results in the formation of ionic bonds, which are formed when electrons are transferred between atoms. Hydrogen bonds are relatively weak interactions that take place between an electronegative atom (such as fluorine, oxygen, or nitrogen) and a hydrogen atom that is covalently bound to it. Van der Waals interactions: These are atom-to-atom or molecule-to-molecule weak, fleeting attractivities caused by shifting electron concentrations around the atoms.For such more question on Ionic bonds:
https://brainly.com/question/977324
#SPJ11
The following question may be like this:
What is the order of bonds and interactions from the strongest to the weakest?
(Covalent, Van der Waals interaction, ionic bond, hydrogen bond)
which terms refer to distance covered over a given amout of time
Answer:
distance covered over a given amout of time is called velocity
Which ions are isoelectronic with Ar?
Ba2+
I-
S2-
Al3+
K+
I- and Cl- are isoelectronic with Ar, as they both have the same number of electrons as the noble gas.
"Isoelectronic" means having the same number of electrons. Ar has 18 electrons, so we need to find ions that also have 18 electrons. Ba2+ has 56 electrons, so it's not isoelectronic. S2- has 18 electrons, so it is isoelectronic. Al3+ has 13 electrons, so it's not isoelectronic. K+ has 19 electrons, so it's not isoelectronic. Finally, I- and Cl- both have 18 electrons, so they are both isoelectronic with Ar.
Learn more about Isoelectronic here:
https://brainly.com/question/6807313
#SPJ11
Question An akene 't undergees ozonelysis and gives 'y' and 'y' of molecular formula ₂₂ 0.`'y' and y functional isomers of each other an write the two-steps Chemical equation for the conversion of '`t` into 'y' and 'z' b. Write the strucoral formula of Y'E=' Why are they called functional isomer? ( what happens when hydrogen gas in the presence of nicked catalyst - is passed over 'X' ? 4 d. How can you prove chemically. The compound 'x' is unsaturated.
Answer:
a. The given molecular formula of the akene is C22H40. When it undergoes ozonolysis, it gives two products with the same molecular formula C22H40, which are functional isomers of each other. These two isomers are 1-octene and 9-octene.
The two-step chemical equation for the conversion of the akene into 1-octene and 9-octene is as follows:
Step 1: Ozonolysis of the akene to form ozonides
C22H40 + 3O3 → C22H40O3 + 3O2
Step 2: Reduction of the ozonides to form 1-octene and 9-octene
C22H40O3 + 6H2O → 3C8H16 + 3C8H18O
b. The structural formula of the two isomers 1-octene and 9-octene are as follows:
1-octene: CH3(CH2)6CH=CH2
9-octene: CH3(CH2)4CH=CH(CH2)2CH3
They are called functional isomers because they have the same molecular formula but different functional groups. In this case, both isomers have an alkene functional group, but they differ in the position of the double bond.
c. When hydrogen gas in the presence of a nickel catalyst is passed over X, it undergoes hydrogenation to form a saturated compound Y. The chemical equation for the reaction is as follows:
X + H2 → Y
d. One way to prove that the compound X is unsaturated is by performing the bromine water test. Bromine water is a reddish-brown solution of bromine in water. When added to an unsaturated compound, it undergoes decolorization due to the addition of bromine across the double bond. If X is unsaturated, then it will decolorize bromine water, indicating the presence of a double bond.
Identify the part of the slow carbon cycle in which the total amount of carbon is most likely decreasing the most explain why this decrease the occurs
The slow carbon cycle involves processes that take place over geological timescales, including the transfer of carbon between the atmosphere, oceans, rocks, and soils. The total amount of carbon in each of these reservoirs can change over time due to various factors, such as natural and human-induced processes.
One part of the slow carbon cycle in which the total amount of carbon is most likely decreasing the most is the process of sedimentation of organic matter in ocean sediments. This occurs because the organic matter that sinks to the seafloor is buried and undergoes diagenesis, a process by which it is transformed into more stable forms of carbon, such as kerogen or graphite. The decrease in carbon occurs because the rate of sedimentation of organic matter is faster than the rate of carbon input from sources such as volcanoes, weathering of rocks, and human activities.
Learn more about the carbon cycle here.
https://brainly.com/question/30633292
#SPJ1
Complete and balance the equation for the thermal decompositon of potassium chlorate.
If 9.50 moles of oxygen is produced, how much heat is also produced? The heat of reaction is -89.4 kJ.
If you start with 307 grams of potassium chlorate, how many liters of oxygen will be produced at 723 torr and 32.0 °C?.
How much heat is produed when 307 grams of potassium chlorate is decomposed?
If the heat from the reaction was all absorbed by the 74.2 liter of collection water at 14.3 °C, what would the final temperature of the collection water?
Answer:
1. The balanced equation for the thermal decomposition of potassium chlorate is:
2KClO3(s) → 2KCl(s) + 3O2(g)
2. Using the stoichiometry of the balanced equation, we can see that 2 moles of KClO3 produce 3 moles of O2. Therefore, 9.50 moles of O2 are produced by (9.50 moles O2 / 3 moles O2 per 2 moles KClO3) = 6.33 moles KClO3. The heat produced by the decomposition of 6.33 moles of KClO3 is:
q = nΔHrxn = (6.33 mol)(-89.4 kJ/mol) = -566 kJ
3. To solve this problem, we need to use the ideal gas law to calculate the volume of O2 produced. First, we convert 307 g of KClO3 to moles:
n = m/M = 307 g / 122.55 g/mol = 2.50 mol KClO3
Using the stoichiometry of the balanced equation, we can see that 2 moles of KClO3 produce 3 moles of O2. Therefore, 2.50 moles of KClO3 produce (3/2 x 2.50) = 3.75 moles of O2. Now we can use the ideal gas law to calculate the volume of O2 produced:
PV = nRT
V = nRT/P = (3.75 mol)(0.08206 L·atm/mol·K)(305.15 K)/(723 torr/760 torr/atm) = 8.59 L
4. The heat produced by the decomposition of 307 g of KClO3 is:
n = m/M = 307 g / 122.55 g/mol = 2.50 mol KClO3
q = nΔHrxn = (2.50 mol)(-89.4 kJ/mol) = -223 kJ
5. We can use the equation q = mcΔT to calculate the final temperature of the water. First, we need to calculate the heat capacity of the water:
C = mc = (74.2 L)(1.00 kg/L)(4.18 J/g·K) = 310 kJ/K
Now
Explanation:
If only reactants are initially added to a reaction flask, which species decrease in concentration during the course of the reaction N2 (g) + 3H2 (g) â 2NH3 (g)? Select all that apply.
In the given reaction N2 (g) + 3H2 (g) â 2NH3 (g), the reactants are N2 and H2, and the product is NH3.
During the course of the reaction, the reactants will decrease in concentration as they are being consumed to form the product. Therefore, both N2 and H2 will decrease in concentration. At the same time, the concentration of the product NH3 will increase.
The reaction stoichiometry tells us that one molecule of N2 reacts with three molecules of H2 to produce two molecules of NH3. This means that the decrease in concentration of N2 will be twice as much as the decrease in concentration of H2.
For such more question on reactants:
https://brainly.com/question/26283409
#SPJ11
The following question may be like this:
If only reactants are initially added to a reaction flask, which species decrease in concentration during the course of the reaction N2 (g) + 3H2 (g) â 2NH3 (g)? Select all that apply.
H2N2H3Are both H2 and N2.Calculate the number of
electrons in p orbitals in 10.0 g
H7- ion in the ground state.
The H7- ion has one more electron than a neutral hydrogen atom (H), which has an electron configuration of 1s1.
Adding one electron to this configuration results in 1s2, which is the electron configuration of the H- ion. However, the H7- ion has seven extra electrons compared to a neutral hydrogen atom. We can fill these electrons in the following order:
1s2 2s2 2p3
The three electrons in the 2p subshell are in p orbitals. Therefore, the number of electrons in p orbitals in the H7- ion is 3.
To calculate the number of moles of H7- in 10.0 g, we first need to convert the mass to moles using the molar mass of H7-. The molar mass of H7- is: (7 x 1.00794 g/mol) + 1.00794 g/mol = 8.05558 g/mol
Therefore, the number of moles of H7- in 10.0 g is:
10.0 g / 8.05558 g/mol = 1.2412 mol
Finally, we can calculate the total number of electrons in p orbitals in 10.0 g of H7- ion in the ground state:
3 electrons/pair x 1 pair/ion x Avogadro's number x 1.2412 mol = 2.117 x 10^24 electrons
Therefore, there are approximately 2.117 x 10^24 electrons in p orbitals in 10.0 g of H7- ion in the ground state.
Learn more about hydrogen atom here:
https://brainly.com/question/29913273
#SPJ11
The small repeating units used to synthesize polymers are called _______.
The small repeating units used to synthesize polymers are called monomers. These monomers are joined together through a chemical reaction known as polymerization, which results in the formation of long chains of polymers.
The properties of these polymers, such as their strength and flexibility, depend on the specific monomers used and the conditions under which the polymerization occurs. By varying the monomers used, scientists can create a wide range of polymers with different properties that are used in a variety of applications, from plastics and textiles to pharmaceuticals and medical devices.
In polymer synthesis, monomers are chemically bonded to form long chains called polymers. The process, called polymerization, involves the joining of many monomers together. Polymers can be natural, like DNA and cellulose, or synthetic, like plastics and rubber.
The properties of a polymer depend on the type of monomer(s) used and the structure of the polymer chains. Monomers can vary greatly in size and functionality, leading to a wide range of polymers with diverse characteristics and applications.
To know more about polymers visit:
https://brainly.com/question/17354715
#SPJ11
carbon diffuses in iron via an interstitial mechanism--for fcc iron from one octahedral site to an adjacent one. in section impurities in solids, we note that two general sets of point coordinates for this site are 0 1/2 1 and 1/2 1/2 1/2. select the family of crystallographic directions in which thich this diffusion of carrbon in fcc iron takes place
Carbon diffusion in FCC iron occurs through interstitial diffusion along the <111> crystallographic directions. This is a significant process in steel production that affects material strength and other mechanical properties. Knowledge of crystallographic directions is crucial in controlling material properties.
In FCC iron, carbon diffuses via an interstitial mechanism from one octahedral site to an adjacent one. The octahedral sites are located at the center of the face of the FCC unit cell, and there are two general sets of point coordinates for this site: (0, 1/2, 1) and (1/2, 1/2, 1/2).To determine the family of crystallographic directions in which carbon diffuses in FCC iron, we need to consider the symmetry of the crystal structure. FCC iron has cubic symmetry, and it has four three-fold symmetry axes that pass through the centers of the faces of the unit cell. The <111> family of crystallographic directions coincides with these symmetry axes, and they are the most closely packed directions in the FCC structure.Therefore, carbon diffusion in FCC iron takes place along the <111> family of crystallographic directions. This diffusion mechanism is known as interstitial diffusion because the carbon atoms occupy interstitial sites in the iron lattice. The diffusion of carbon in FCC iron is an important process in the production of steel, as it influences the material's strength and other mechanical properties. Understanding the crystallographic directions in which diffusion occurs is essential for controlling the properties of the material.For more such question on crystallography
https://brainly.com/question/28301570
#SPJ11
identify the best reagents to convert 1-hexyne into (e)-1,2-dibromo-1-hexene.select answer from the options belowxs br2, ccl41 equiv hbr, roorxs hbr1 equiv. br2, ccl41 equiv hbr
The best reagents to convert 1-hexyne into (e)-1,2-dibromo-1-hexene are 1 equiv. Br2 in CCl4, followed by NaOH to convert the mixture of (Z)- and (E)-isomers to the desired (E)-isomer.
This reaction is called the Vicinal Dibromination reaction. Option A: xs Br2 in CCl4 is a good choice of reagents, but it will give a mixture of (Z)- and (E)-isomers. Option B: 1 equiv. HBr will result in the formation of (Z)-1-bromo-1-hexene. Option C: ROOR is a radical initiator and will not result in the desired product.
To know more about different reagents and isomers : https://brainly.com/question/29713522
#SPJ11
how many moles of LiNO3 are in 250mL of a 0.30M solution?
[tex]LiNO_{3}[/tex]There are 0.075 moles of [tex]LiNO_{3}[/tex] in 250 mL of a 0.30 M solution.
To determine the number of moles of [tex]LiNO_{3}[/tex] in 250 mL of a 0.30 M solution, we can use the formula:
moles of solute = concentration (M) x volume (L)
First, we need to convert the volume from milliliters (mL) to liters (L):
250 mL = 0.25 L
Next, we can substitute the given values into the formula:
moles of [tex]LiNO_{3}[/tex] = 0.30 M x 0.25 L
moles of [tex]LiNO_{3}[/tex] = 0.075 mol
Therefore, there are 0.075 moles of [tex]LiNO_{3}[/tex] in 250 mL of a 0.30 M solution.
Learn more about moles, here:
https://brainly.com/question/15209553
#SPJ1
Between the same two atoms, the strongest covalent bond is the ___ bond and the weakest is the ___ bond.
Between the same two atoms, the strongest covalent bond is the triple bond and the weakest is the single bond.
A single bond is formed when two atoms share one pair of electrons. This type of bond is the most stable and secure of all covalent bonds as the shared electrons are firmly held in place by the two atoms. The weakest covalent bond between two atoms is a triple bond. A triple bond is formed when two atoms share three pairs of electrons. This type of bond is less stable than a single bond as the three shared electrons are more loosely held and may be more easily lost or broken.
To learn more about covalent bond click here https://brainly.com/question/10777799
#SPJ11
Determine the amount of energy absorbed by 2.00 L of gasoline as it is converted to the vapor phase at its boiling point.
The amount of energy absorbed by 2.00 L of gasoline as it is converted to the vapor phase at its boiling point is 38,550 J
How to calculate the energyUsing the following formula:
q = m x ΔHvap
Volume= 2.00 L = 2000 mL
density of gasoline = 0.75 g/mL
mass = volume x density = 2000 mL x 0.75 g/mL = 1500 g
The enthalpy of vaporization of gasoline= 42.0 kJ/mol = 25.7 J/g
q = m x ΔHvap = 1500g x 25.7 J/g = 38,550 J
Learn more about energy on
https://brainly.com/question/13881533
#SPJ1
Which compound is a tertiary halogenoalkane?
A. (CH3CH2)2CHBr
B. CH3(CH2)3CH2Br
C. (CH3)2CHCH2CH2Br
D. CH3CH2C(CH3)2Br
The compound that is a tertiary halogenoalkane is D. CH3CH2C(CH3)2Br, since it has a tertiary carbon (bonded to three other carbon atoms).
A halogen atom (Br, Cl, I, or F) is joined to a carbon atom that is connected to three more carbon atoms to form a tertiary halogenoalkane. Option D creates a tertiary halogenoalkane by bonding the Br-attached carbon atom to three additional carbon atoms. The Br-attached carbon is connected to two other carbon atoms, making Option A a secondary halogenoalkane. Because the carbon atom with the Br attached is only connected to one other carbon atom, option B is a primary halogenoalkane. Because the Br-attached carbon is connected to two additional carbon atoms, option C also qualifies as a secondary halogenoalkane.
learn more about halogenoalkane here:
https://brainly.com/question/30477930
#SPJ11
What is true of a molecule of gaseous hydrogen (H2)?
The true statement of a molecule of gaseous hydrogen is It has no net charge. Therefore the correct option is option A.
A covalently bound pair of hydrogen atoms make up a gaseous hydrogen molecule (H2), which is a substance. This indicates that in order to create a stable molecule, the two hydrogen atoms share an electron.
H2 is the lightest and most prevalent element in the universe and is a diatomic gas at room temperature and atmospheric pressure. It has no colour, no smell, and is non-toxic.
Highly flammable H2 gas can be used as fuel for a variety of devices, including fuel cells, IC engines, and rockets. Another way to create H2 gas is through the electrolysis of water, reforming of natural gas, or gasification of coal. Therefore the correct option is option A.
For such more question on molecule:
https://brainly.com/question/30375112
#SPJ11
The following question may be like this:
What is true of a molecule of gaseous hydrogen (H2)? Multiple choice question.
It has no net charge.It has a partial positive charge.It has one partial positive charge and one partial negative charge which are balanced.Why is sodium sulphite added to the conical flask once crystals are formed?
By adding sodium sulphite to the conical flask, you can ensure the stability and preservation of the formed crystals.
Sodium sulphite is added to the conical flask once crystals are formed to stabilize and preserve the newly formed crystals. Here's a step-by-step explanation:
1. Crystals are formed in a conical flask through a chemical reaction or by evaporating a solution.
2. After the crystals have formed, sodium sulphite is added to the conical flask.
3. Sodium sulphite acts as a stabilizer and preservative, preventing the crystals from reacting with other substances in the solution or with atmospheric oxygen.
4. This stabilization helps maintain the quality and integrity of the crystals, ensuring they remain in their desired state for further analysis or use.
To learn more about sodium sulphite click here https://brainly.com/question/11855511
#SPJ11