You're driving a bumper car at a circus at
18 m/sec, and you hit another car that's at
rest. If you end up going at 6.0 m/sec, what
is the final speed of the other car, given
that both cars have 100.0 kg mass, you
have 80.0 kg mass, and the other person
has a mass of 70.0 kg?

Answer:

Informal education is important because it can help individual to learn how to react and control situations.

It help individual to improve on its existing knowledge, new skills or ideas. This kind of education can happen any where and it can add values to the learner.

Explanation:

Informal education is a type of education that is learned from different life experiences, happenings outside a structured curriculum.

Informal education is important because it can help individual to learn how to react and control situations.

It help individual to improve on its existing knowledge, new skills or ideas. This kind of education can happen any where and it can add values to the learner.

Answer:

the upward force is equal to the passenger weight

The answer that is the truth about the force that the seat exerts on the passenger is the upward force is equal in magnitude to the passenger's weight.

The acting forces on the body has been said to be vertical. This implies that the upward force and the downward force of gravity are the same.

Using the second law of Isaac Newton, the downward direction of the forces would be ascertained.

Read more on force and magnitude here:

https://brainly.com/question/19802988

The earth has a magnetic field. It is much like a bar magnet. Imagine a gigantic bar magnet inside the Earth. But there is no giant magnet inside it.

To have a pretty good idea what earth's magnetic field is shaped like we imagine a bar magnet inside the earth.

The magnetic field is made by the motion of molten iron in earth's outer core.  The swirling motion of molten iron changes all the time. Therefore, the magnetic fields will also get change. Then, the magnet poles also move.

The North pole and the south pole are two geographic poles of earth.  These poles are the places on the earth's surface that earth's imaginary spin axis passes through.

There are two magnetic poles of the earth: North magnetic pole and South magnetic pole.

Earth's magnetic field is tilted a little bit. If we imagine that earth's magnetic field is made by a giant bar magnet. Then, the bar magnet would make an with earth's spin axis.

The geographic poles and the magnetic poles are not in the same place.

If we are standing at one magnetic poles then the magnetic field lines would be straight up and down.

Earth's magnetic field is a complex and dynamic phenomenon that is generated by the motion of molten iron in its outer core. The magnetic field extends far beyond the planet and is responsible for protecting Earth from harmful solar radiation and cosmic rays.

Earth's magnetic field is roughly dipolar in shape, meaning it has two main magnetic poles - north and south - and the field lines emerge from the north and re-enter at the south pole. The magnetic field has a strength of about 25-65 microteslas (μT) at the Earth's surface, and it extends for several tens of thousands of kilometers into space.

2. Where are Earth's magnetic poles?

Earth's magnetic poles are not fixed and are constantly moving due to the complex and dynamic nature of the planet's magnetic field. Currently, the north magnetic pole is located in the Arctic Ocean, close to Canada's Ellesmere Island, and the south magnetic pole is located in the Antarctic Ocean, near the coast of Antarctica.

3. Where is the magnet that causes Earth's magnetic field located? What is this magnet made of?

The magnet that causes Earth's magnetic field is not a physical magnet but rather a result of the motion of molten iron in the Earth's outer core. The outer core is a layer of liquid iron and nickel that surrounds the solid inner core. The motion of this molten iron generates electrical currents, which in turn create a magnetic field.

4. Does Earth's magnetic field move?

Yes, Earth's magnetic field is not static and is constantly changing due to the complex nature of the planet's interior. The magnetic poles are constantly moving and the strength of the magnetic field can vary over time. The magnetic field can also be influenced by external factors such as solar storms and changes in the solar wind. Scientists continue to study Earth's magnetic field to better understand its behavior and how it affects the planet.

Therefore, The magnetic field of the Earth is a complex and dynamic phenomenon caused by the movement of molten iron in its outer core. The magnetic field extends far beyond the planet and is in charge of shielding the planet from harmful solar radiation and cosmic rays.

To learn about cosmic rays click:

https://brainly.com/question/13960192

#SPJ3

Using Newtons Second Law:

F = m×a

F = (0.25 kg)(-2 m/s²)

F = -0.5 N

Answer:

Explanation:

The average kinetic energy can be found by using the formula

[tex]k = \frac{1}{2} m {v}^{2} \\ [/tex]

m is the mass

v is the velocity

From the question we have

[tex]k = \frac{1}{2} \times 200 \times {5}^{2} \\ = 100 \times 25[/tex]

We have the final answer is

Hope this helps you

Answer:

The cantaloupe has a speed of 117.6 m/s

Explanation:

Free Fall Motion

It occurs when an object falls under the sole influence of gravity. Any object that is being acted upon solely by the force of gravity is said to be in a state of free fall. Free-falling objects do not face air resistance.

If an object is dropped from rest in a free-falling motion, it falls with a constant acceleration called the acceleration of gravity, which value is [tex]g = 9.8 m/s^2[/tex].

The final velocity of a free-falling object after a time t is given by:

vf=g.t

The cantaloupe has been dropped from rest. We are required to find the speed after t=12 seconds.

Calculate the final speed:

vf=9.8 * 12 = 117.6 m/s

The cantaloupe has a speed of 117.6 m/s

Answer:

Refractive index of the plastic = 1.46

Explanation:

By Snell's law,

[tex]\frac{\text{sin}\theta _{2} }{\text{sin}\theta _{1}}=\frac{n_1}{n_2}[/tex]

Here, [tex]\theta _1[/tex] = Angle of incidence in medium 1 (Plastic)

[tex]\theta_2[/tex] = Angle of refraction in medium 2 (Water)

[tex]n_1[/tex] = Refractive index of medium 1 (Plastic)

[tex]n_2[/tex] = Refractive index of medium 2 (Water)

By substituting values in the formula,

[tex]\frac{\text{sin}(48.7)}{\text{sin}(55.5)}=\frac{1.33}{n_2}[/tex]

[tex]n_2=\frac{1.33\times \text{sin}(55.5)}{\text{sin}(48.7)}[/tex]

    = 1.46

Therefore, refractive index of the plastic = 1.46

Answer:

(2x + 4)(x - 4)=2x^2-4x-16

Answer:

S = 2461.53 [kJ]

Explanation:

The change in entropy in a process such as melting can be calculated by means of the following expression.

[tex]S=\frac{H*m}{T}[/tex]

where:

S = entropy [kJ]

H = fusion heat = 3.36*10¹ [J/kg]

m = mass = 0.02 [kg]

T = temperature in kelvin = 273 [K]

[tex]S = \frac{0.02*3.36*10^{1} }{(273+0)}\\S = 2461.53 [kJ][/tex]

Answer:

yes

Explanation:

Answer:

v0 = 24.42 m/s (Approx)

Explanation:

Given:

Increase in frequency = 7.1% =

Computation:

Assume n = 100%

n1 = [(v+v0)/(v+v1)]n

[100 + 7.1] =  [(344+v0)/(344+0)]100

107.1 =   [(344+v0)/(344)]100

v0 = 24.42 m/s (Approx)

Answer:

In series

Explanation:

In such experiment, the ammeter is connected in series with the heater, in order to measure the circulating current.

By the way, ammeters are always connected in series in circuits to measure the running current in it.

Answer:

here u go

Explanation:

Earth's rotation is the rotation of planet Earth around its own axis. Earth rotates eastward, in prograde motion. As viewed from the north pole star Polaris, Earth turns counterclockwise.

Answer:

A thyristor (/θaɪˈrɪstər/) is a solid-state semiconductor device with four layers of alternating P- and N-type materials. It acts exclusively as a bistable switch, conducting when the gate receives a current trigger, and continuing to conduct until the voltage across the device is reversed biased, or until the voltage is removed (by some other means).

Explanation:

Correct me if im wrong

Answer:

6.77m/s

Explanation:

Using the law of conservation of momentum

m1u1 + m2u2 = (m1+m2)v

m1 and m2 are the masses of the object

u1 and u2 are the velocities before collision

v is the final collision

Given

m1 = 300g  = 0.3kg

u1 = 6.0m/s

m2 = 10g = 0.01kg

u2 = 30m/s

Required

The bird's speed immediately after swallowing v

Substitute the given values into the formula

m1u1 + m2u2 = (m1+m2)v

0.3(6) + 0.01(30) = (0.3+0.01)v

1.8+0.3 = 0.31v

2.1 = 0.31v

v = 2.1/0.31

v = 6.77m/s

Hence the bird's speed immediately after swallowing is 6.77m/s

Answer:

B. Planet X, because its line has the greater slope.

Explanation:

In a speed graph, acceleration is slope. A greater slope means a greater acceleration. According to Newton's 2nd law (F=mg), a greater acceleration means a greater force.

Planet X exerts the greater force of gravity on the sphere, because its line has the greater slope. Hence option B is correct.

Gravitational force is force of attraction between two masses. Gravitational force(F) between two bodies is directly proportion to the product of masses(m₁,m₂) of two bodies and inversely proportional to square of distance(r) between them. mathematically it is written as,

F ∝ m₁.m₂

F ∝ 1/r²

F = G m₁,m₂÷r²

where G is gravitational constant, whose value is 6.6743 × 10⁻¹¹ m³ kg-1s⁻².

Force is expressed in Newton N in SI unit. its dimensions are [M¹L¹T⁻²].

This is analogous with coulomb's law which gives force between two charges.

if a planet has greater gravitational force(force of gravity), then body falls with greater speed as compare to other planet which is having less force of gravity. we can see in case of planet X there is greater speed as compare to plane Y in short time. Hence option B is correct.

To know more about Gravity :

https://brainly.com/question/31321801

#SPJ2.

Answer:

Explanation: The chemical action that occurs in the cell while the current is flowing causes hydrogen bubbles to form on the surface of the anode. This action is called POLARIZATION. Some hydrogen bubbles rise to the surface of the electrolyte and escape into the air, some remain on the surface of the anode. If enough bubbles remain around the anode, the bubbles form a barrier that increases internal resistance. When the internal resistance of the cell increases, the output current is decreased and the voltage of the cell also decreases.

   A cell that is heavily polarized has no useful output. There are several methods to prevent polarization or to depolarize the cell.

   One method uses a vent on the cell to permit the hydrogen to escape into the air. A disadvantage of this method is that hydrogen is not available to reform into the electrolyte during recharging. This problem is solved by adding water to the electrolyte, such as in an automobile battery. A second method is to use material that is rich in oxygen, such as manganese dioxide, which supplies free oxygen to combine with the hydrogen and form water.

   A third method is to use a material that will absorb the hydrogen, such as calcium. The calcium releases hydrogen during the charging process. All three methods remove enough hydrogen so that the cell is practically free from polarization.

LOCAL ACTION

   When the external circuit is removed, the current ceases to flow, and, theoretically, all chemical action within the cell stops. However, commercial zinc contains many impurities, such as iron, carbon, lead, and arsenic. These impurities form many small electrical cells within the zinc electrode in which current flows between the zinc and its impurities. Thus, the chemical action continues even though the cell itself is not connected to a load.

   Local action may be prevented by using pure zinc (which is not practical), by coating the zinc with mercury, or by adding a small percentage of mercury to the zinc during the manufacturing process. The treatment of the zinc with mercury is called amalgamating (mixing) the zinc. Since mercury is many times heavier than an equal volume of water, small particles of impurities weighing less than mercury will float to the surface of the mercury. The removal of these impurities from the zinc prevents local action. The mercury is not readily acted upon by the acid. When the cell is delivering current to a load, the mercury continues to act on the impurities in the zinc. This causes the impurities to leave the surface of the zinc electrode and float to the surface of the mercury. This process greatly increases the storage life of the cell.

Answer:the answer is “A book sitting on a high shelf” :)

Explanation:

Although the semi truck certainly has a larger mass, it is not in motion and therefore does not have any momentum. The bicycle however has both mass and velocity and therefore has the larger momentum of the pair.

Answer:

The minimum coefficient of static friction required, µ = 0.10

Note. The question is incomplete. The complete question is given below:

While hauling a log in the back of a flatbed truck, a driver is pulled over by the state police. Although the log cannot roll sideways, the police claim that the log could have slid out the back of the truck when accelerating from rest. The driver claims that the truck could not possibly accelerate at the level needed to achieve such an effect. Regardless, the police write a ticket anyway and now the driver court date is approaching.

The log has a mass of m = 929 kg; the truck has a mass of M = 8850 kg. According to the truck manufacturer, the truck can accelerate from 0 to 55 mph in 23.0 seconds, but this does not account for the additional mass of the log. Calculate the minimum coefficient of static friction μs needed to keep the log in the back of the truck.

Explanation:

First, velocity in mph is converted to m/s

1 mph = 0.447 m/s

55 mph ≈ 24.6 m/s

The acceleration of the empty truck is a = v/t = 24.6 / 23 = 1.07 m/s²

Force that can be generated by the truck, F = ma

F = 8850kg * 1.07 m/s² = 9469.5 N

However, with the added mass of the log on it, the acceleration of the truck will become;

a = F / m = 9469.5 N / (8550+929)kg = 0.97 m/s²

Frictional force between the log and the truck = 0.97 m/s² * 929 kg = 901.13 N

Normal reaction on the truck due to the weight of the log, R = mg

R = 929 kg * 9.8m/s² = 9104.2 N

Coefficient of static friction, µ = F/R

µ = 901.13/9104.2

µ = 0.098 ≈ 0.10

Therefore, the minimum static friction required is µ = 0.10

Answer:

The fraction of the object that is below the surface of the water is ¹⁷/₂₀

Explanation:

Given;

specific gravity of the object, γ = 0.850

Specific gravity is given as;

[tex]specific \ gravity = \frac{density \ of the \ object}{density \ of \ water}\\\\0.85= \frac{density \ of the \ object}{1000 \ kg/m^3} \\\\density \ of the \ object = 850 \ kg/m^3[/tex]

Fraction of the object's weight below the surface of water is calculated as;

[tex]= \frac{850}{1000} \ \times\ 100\%\\\\= 85 \% \\\\= \frac{17}{20}[/tex]

Therefore, the fraction of the object that is below the surface of the water is ¹⁷/₂₀

Explanation:

The width of the central maximum is given by

W = 2 λ L / a

where W is the width of the central maximum

λ is the wavelength of the light used.

L is the distance between the aperture and screen

a is the width of the slit or aperture

So we can see that if any one quantity is varied by keeping others constant in the above formula , there would be a change in width of central maximum.

Answer:

880J/kelvin

Explanation:

Q =MC ×change in t

c =C/m

C=Q/change in t

c= Q/ m× change in t

c = 26400 / 2.0 × 15

c = 880 J/kelvin

Answer: Kinetic Energy to Electrical.

Explanation: The magnet is rotated as a result of the spinning wheels, and this results in a powerful stream of electrons, therefore converting kinetic to electrical.