You plunge a basketball beneath the surface of a swimming pool until half the volume of the basketball is submerged. If the basketball has a radius of 12cm what is that buoyancy force on the ball due to the water​

Answer:

the height of the rooftop is approximately 16.4 meters or about 54 feet high.

Explanation:

To solve this problem, we need to use the kinematic equations of motion. We will assume that air resistance is negligible and that the acceleration due to gravity is -9.8 m/s^2.

First, we will use the initial velocity and angle of the kickball to find its horizontal and vertical components of velocity.

The horizontal component of velocity (Vx) can be found using the equation:

Vx = V * cos(theta)

where V is the initial velocity and theta is the angle of the kickball.

Vx = 15.2 m/s * cos(63 degrees)

Vx = 6.62 m/s

The vertical component of velocity (Vy) can be found using the equation:

Vy = V * sin(theta)

Vy = 15.2 m/s * sin(63 degrees)

Vy = 13.7 m/s

Next, we can use the vertical component of velocity to find the maximum height (h) reached by the kickball. We can use the following kinematic equation:

h = Vy^2 / (2 * g)

where g is the acceleration due to gravity.

h = (13.7 m/s)^2 / (2 * 9.8 m/s^2)

h = 9.47 meters

So, the maximum height reached by the kickball is 9.47 meters.

Finally, we can use the time it takes for the kickball to land on the rooftop to find the height (d) of the rooftop. We can use another kinematic equation:

d = Vy * t + 0.5 * g * t^2

where t is the time it takes for the kickball to land on the rooftop.

d = 13.7 m/s * 2.4 s + 0.5 * (-9.8 m/s^2) * (2.4 s)^2

d = 16.4 meters

Therefore, the height of the rooftop is approximately 16.4 meters or about 54 feet high.

Answer: [tex]2 m/s^{2}[/tex] (Assuming the thief starts from 0 m/s)

Explanation:

First you take the final velocity (10) and subtract the initial velocity (0)

[tex]10-0=10[/tex]

Then you divide the difference by the time to get the acceleration

[tex]10/5=2[/tex]

This all uses the equation

[tex]V_{f}-V_{i}=ta[/tex]

The torques due to the weights of the bar and the cylinder are balanced, and the bar-cylinder system remains motionless and does not rotate around the peg in hole C.

The bar-cylinder system does not rotate around the peg in hole C because it is in equilibrium. The torque on the system due to the weight of the cylinder hanging from hole B is balanced by the torque on the system due to the weight of the bar and its distribution around the center of mass at hole D. The center of mass is located such that the torques due to the weights of the bar and the cylinder are equal and opposite, and hence the net torque on the system is zero.

Mathematically, we can express this equilibrium condition as:

T_cylinder = T_bar

The torque due to the weight of the cylinder is given by:

T_cylinder = r_CB * F_cylinder

Similarly, the torque due to the weight of the bar is given by:

T_bar = r_CD * F_bar

where r_CD is the distance between the peg at hole C and the center of mass at hole D, and F_bar is the weight of the bar.

Since the mass of the bar is equal to the mass of the cylinder, we have:

F_cylinder = F_bar = Mg

where M is the mass of the bar and cylinder, and g is the acceleration due to gravity.

Substituting the above equations into the equilibrium condition, we get:

r_CB * Mg = r_CD * Mg

which simplifies to:

r_CB = r_CD

To know more about torques visit:-

brainly.com/question/30338175

#SPJ1

Reduce the volume: Reducing the volume is one of the simplest ways to lessen the sound intensity coming a speaker. As you move farther away from the source of the sound, the intensity of the sound also diminishes.

Nonetheless, regardless of the location, a rock concert can be quite loud. Decibel levels during rock concerts often range from 90 to 120 dB. This decibel level is alarming since it could endanger your ability to hear.

The intensity of the sound is proportional to the square of the distance from the source of the sound wave. The strength of a sound wave depends on whether it travels through a two-dimensional or three-dimensional medium to carry its energy.

To know more about sound intensity visit:-

https://brainly.com/question/30101270

#SPJ1

The equivalent resistance is 6R/11, the current flowing through the circuit is 55/6R, and the voltage across resistor R2 is 55/3 V when the three parallel resistors R1, R2, and R3 are joined in parallel across a 5V battery.

The unit of resistance is ohm (Ω), named after the German physicist Georg Simon Ohm. One ohm is defined as the amount of resistance that will allow one ampere of current to flow with one volt of applied potential difference.

To find the equivalent resistance (R_eq) of the three parallel resistors R1, R2, and R3, we can use the formula:

1/R_eq = 1/R1 + 1/R2 + 1/R3

Substituting R1 = R, R2 = 2R, and R3 = 3R, we get:

1/R_eq = 1/R + 1/2R + 1/3R

1/R_eq = (6/6R + 3/6R + 2/6R) / (1/6R)

1/R_eq = 11/6R

R_eq = 6R/11

To find the current (I) flowing through the circuit, we can use Ohm's Law, which states that:

I = V/R_eq

Substituting V = 5V and R_eq = 6R/11, we get:

I = 5 / (6R/11)

I = 55/6R

To find the voltage (V_R2) across resistor R2, we can use the formula:

V_R2 = I * R2

Substituting I = 55/6R and R2 = 2R, we get:

V_R2 = (55/6R) * (2R)

V_R2 = 55/3 V

To know more about current, visit:

https://brainly.com/question/13076734

#SPJ1

The average force acting on the car as it comes to a stop is [tex]7.00 \times 10^5 N.[/tex]

We can use the equation for average force, which is:

average force = change in momentum / time

To use this equation, we first need to find the change in momentum of the car. We can use the equation:

change in momentum = final momentum - initial momentum

The initial momentum of the car is:

p1 = m1 × v1

where m1 is the mass of the car (2000 kg) and v1 is the initial velocity (14 m/s).

p1 = (2000 kg)(14 m/s) = 28,000 kg × m/s

The final momentum of the car is zero, since it comes to a stop.

p2 = 0

So the change in momentum is:

Δp = p2 - p1 = -28,000 kg × m/s

Now we can substitute these values into the equation for average force:

average force = Δp / t

where t is the time it takes for the car to come to a stop[tex](4.00 \times 10^{-2} s).[/tex]

average force =[tex](-28,000 kg\times m/s) / (4.00 \times 10^{-2} s)[/tex]

average force =[tex]- 7.00 \times 10^5 N[/tex]

The negative sign indicates that the force is acting in the opposite direction to the motion of the car. We could also take the magnitude of the force, which would be:

|average force| = [tex]7.00 \times 10^5 N[/tex]

Therefore, the average force acting on the car as it comes to a stop is [tex]7.00 \times 10^5 N.[/tex]

for such more questions on average force

https://brainly.com/question/18652903

#SPJ4

25 km

please make me brainalist and keep smiling dude because I do don't have time I should help

Taking into account the definition of latent heat, the energy needed to boil 1.5 kg of water is 3,390,000 J.

Latent heat is defined as the energy required by a quantity of substance to change state.

When this change consists of changing from a solid to a liquid phase, it is called heat of fusion and when the change occurs from a liquid to a gaseous state, it is called heat of vaporization.

The heat Q  necessary to provide for a mass m of a certain substance to change phase is equal to

Q = m×L

where L is called the latent heat of the substance and depends on the type of phase change.

In this case, you know:

Replacing in the definition of latent heat:

Q = 1.5 kg× 2,260,000J/kg​

Solving:

Q= 3,390,000 J

Finally, the energy needed is 3,390,000 J.

Learn more about latent heat:

brainly.com/question/14323589

#SPJ1

Answer:

Meteoroids are objects in space that range in size from dust grains to small asteroids. Think of them as “space rocks." When meteoroids enter Earth's atmosphere (or that of another planet, like Mars) at high speed and burn up, the fireballs or “shooting stars” are called meteors.

Explanation:

thx to the internet

Answer:

The potential energy stored in the spring when it is compressed by a distance of 16.0 cm can be calculated using the formula:

U = (1/2) k x^2

where U is the potential energy, k is the spring constant, and x is the displacement from equilibrium position.

Plugging in the given values, we get:

U = (1/2) * 60 N/m * (0.16 m)^2

U = 0.768 J

When the mass is released, the potential energy stored in the spring is converted to kinetic energy of the mass as it moves upward. At the highest point, all of the kinetic energy is converted back to potential energy. The total mechanical energy of the system (spring + block) is conserved, so we can equate the potential energy at the highest point to the initial potential energy stored in the spring:

mgh = U

where m is the mass of the block, g is the acceleration due to gravity (9.81 m/s^2), h is the maximum height reached by the block.

Plugging in the values, we get:

(0.250 kg) * (9.81 m/s^2) * h = 0.768 J

Solving for h, we get:

h = 0.768 J / (0.250 kg * 9.81 m/s^2) ≈ 0.312 m

Therefore, the block rises to a maximum height of approximately 0.312 m above its initial position.

(Please could you kindly mark my answer as brainliest you could also follow me so that you could easily reach out to me for any other questions)

The correct answer is Option- B: A flashlight uses direct current (DC).

Direct current (DC) is one-directional flow of electric charge. An electrochemical cell is a prime example of DC power. Direct current may flow through a conductor such as a wire, but can also flow through semiconductors, insulators, or even through a vacuum as in electron or ion beams.
Electric current flows in two ways as an alternating current (AC) or direct current (DC). The main difference between AC and DC lies in the direction in which the electrons flow. In DC, the electrons flow steadily in a single direction, while electrons keep switching directions, going forward and then backwards in AC.Thus,The correct answer is Option- B: flashlight.

For such more questions on direct current :

brainly.com/question/10715323

#SPJ11

According to current understanding, the first generation of stars differed from stars born today in their composition.

The first generation of stars, also known as Population III stars, were made up of mostly hydrogen and helium, with very little to no heavier elements.

This is because they formed from the gas and dust left over from the Big Bang, which was primarily hydrogen and helium.

In contrast, stars born today, also known as Population I stars, have a higher percentage of heavier elements, such as carbon, oxygen, and iron.

This is because they formed from gas and dust that has been enriched with heavier elements from previous generations of stars.

As stars age and die, they expel these heavier elements into the surrounding gas and dust, which then goes on to form new stars.

Therefore, the main difference between the first generation of stars and stars born today is their composition, with the first generation having a higher percentage of hydrogen and helium, and stars born today having a higher percentage of heavier elements.

To know more about  first generation of stars, refer here:

https://brainly.com/question/30806876#

#SPJ11

The correct answer is isostasy. When the mass of water that an iceberg displaces is equal to the mass of the iceberg, it floats -  This is known as isostasy.

Isostasy is the process whereby the mass of an object affects the gravitational forces and causes it to float. In this case, when the mass of an iceberg is equal to the mass of the water it displaces, the forces acting on the iceberg are balanced, and it will float.

Isostasy occurs when a body's mass is distributed in such a way that the gravitational forces acting upon it are equal in all directions.

In the case of an iceberg, when the mass of the iceberg is equal to the mass of the water it displaces, the downward force of the iceberg's weight and the upward force of the water's buoyancy balance each other out, and the iceberg floats.

This is thus an example of isostasy, a process by which the mass of an object affects the gravitational forces, causing it to float.

To know more about isostasy, refer here:

https://brainly.com/question/30892494#

#SPJ11

Answer:

15 N

Explanation:

work done by the force in vector form is given by the equation,

[tex]W = \vec{F}.\delta \vec{r}[/tex]

where . represents the dot product.

in the given question,

[tex]F = 4i - 3j + 2k[/tex]

and

[tex]\delta \vec{r} = (2 - 3)i + (-1 - 2)j + (4 - (-1))k[/tex]

[tex]\delta \vec{r} = -i - 3j + 5k[/tex]

on doing the dot product we get

[tex]W = -4 + 9 + 10\\W = 15[/tex]

Hopefully this answer helped you.

We can ascertain the forces in each component of the complex truss and whether they are in tension or compression by using the method of joints or method of sections.

To determine the forces in all the members of the complex truss, we can first substitute member AD with one placed between E and C. This will result in a simpler truss with fewer members and easier to analyze.

Once we have the simplified truss, we can apply the method of joints or method of sections to find the forces in each member. The method of joints involves analyzing the forces acting at each joint in the truss, while the method of sections involves cutting through the truss to create a section and analyzing the forces acting on that section.

After we have found the forces in the members, we can determine whether they are in tension or compression. A member is in tension if it is being stretched, while it is in compression if it is being compressed or shortened. This depends on whether the forces acting on the member are pulling it apart or pushing it together.

In general, a truss is designed so that all members are either in tension or compression, and none of them are in bending or shear. This is because trusses are designed to resist only axial loads, and not bending or shear loads.

Therefore, by using the method of joints or method of sections, we can determine the forces in all the members of the complex truss and whether they are in tension or compression.

To learn more about  forces refer to:

brainly.com/question/13191643

#SPJ4

The distance traveled while accelerating can be found by multiplying the average velocity by the time taken to accelerate

Complete question:

A boat accelerates from 8.5 m/s west to 1.8 m/s west at a rate of 2.9 m/s^2 east. How far does it travel while accelerating?

The average velocity is the difference between the initial and final velocities, divided by two. The time taken to accelerate is the difference between the initial and final velocities, divided by the rate of acceleration.

Given Data

we know that the expression for computing distance is given as

Distance traveled while accelerating = Average velocity * Time taken to accelerate

Substituting our data in the expression we have

Distance traveled while accelerating = 3.35 m/s * 2.03 s = 6.80 m

Learn more about Distance here:

https://brainly.com/question/26046491

#SPJ1

The animal that is a vertebrate is a fish.

Vertebrates are animals that possess a backbone, also known as a vertebral column or spinal column. The backbone is composed of individual vertebrae, which protect the spinal cord and provide support for the body.

Vertebrates are a diverse group of animals and include fish, amphibians, reptiles, birds, and mammals. They are characterized by having a complex nervous system, a closed circulatory system, and a well-developed brain.

Vertebrates are also capable of a wide range of behaviors and have adapted to live in various habitats, from the depths of the ocean to the highest mountains.

Learn about Vertebrates here https://brainly.com/question/19672046

#SPJ1

a. The speed Se of the spacecraft when it crashes into the earth is approximately 11.2 km/s.

b. The spacecraft's speed when its distance from the center of the earth is R = αRe is Se / √(α).

a. To find the speed Se of the spacecraft when it crashes into the earth, we can use the law of conservation of energy. At R = infinity, the spacecraft has zero kinetic energy and potential energy, so its total mechanical energy is zero. As it falls towards the earth, the potential energy decreases while the kinetic energy increases. At the moment of impact, all of the potential energy has been converted to kinetic energy.

Using the law of conservation of energy, we have:

[tex]0 = 1/2 mv^2 - GM_em/r[/tex]

where m is the mass of the spacecraft, v is its speed at impact, G is the universal gravitational constant, and r is the distance from the center of the earth to the spacecraft at impact.

We can rearrange this equation to solve for v:

[tex]v = \sqrt{(2GM_e/r)}[/tex]

Substituting the values for G, M_e, and r, we get:

[tex]v = \sqrt{(2 \times 6.6743 \times 10^{-11} m^3/kg s^2 \times 5.97 \times 10^{24} kg / 6.38 \times 10^6 m)}[/tex]

[tex]v = 11.2 km/s[/tex]

Therefore, the speed Se of the spacecraft when it crashes into the earth is approximately 11.2 km/s.

b. To find the spacecraft's speed when its distance from the center of the earth is R = αRe, we can use conservation of energy again. The spacecraft still has zero kinetic energy and potential energy at R = infinity, so we can use the same equation as before:

[tex]0 = 1/2 mv^2 - GM_em/r[/tex]

But now r = αRe, so we can solve for v in terms of Se and α:

v = √(2GM_e/αRe)

Substituting the value of [tex]GM_e[/tex] from before and simplifying, we get:

v = Se / √(α)

Therefore, the spacecraft's speed when its distance from the center of the earth is R = αRe is Se / √(α).

for such more question on kinetic energy

https://brainly.com/question/25959744

#SPJ4

 It would take the runner approximately 10,268.29 seconds (or about 2 hours, 51 minutes, and 8 seconds) to complete a marathon race of 42.2 km, maintaining an average speed of 4.1 m/s.

We can use the formula:

time = distance ÷ speed

to calculate the time it would take the runner to complete a marathon race of 42.2 km, given an average speed of 4.1 m/s.

First, we need to convert the distance to meters, as the speed is given in meters per second:

42.2 km = 42,200 m

Now, we can substitute the values into the formula:

time = distance ÷ speed

time = 42,200 m ÷ 4.1 m/s

time ≈ 10,268.29 s

Thus the time that the runner would take is  10,268.29 seconds  to complete a marathon race.

For such more questions on average speed :

brainly.com/question/6504879

#SPJ11

Answer:

30q1

Explanation:

Uniformly charged spheres are “touching”. 4. What must be the distance between point charge q1 = 26.0µC and point charge q2 = −47.0µC

The angular velocity of the drum is approximately 0.558 radians per second.

To find the angular velocity of the drum, we can use the centripetal force equation:

F = ma = mrω^2

where F is the force of friction between the drum and the rider's clothes, m is the mass of the rider, r is the radius of the drum (which is half its diameter, or 5 m), and ω is the angular velocity of the drum.

We can rearrange this equation to solve for ω:

ω^2 = F / mr

The force of friction can be found using the coefficient of static friction and the normal force, which is the weight of the rider:

F = μN = μmg

where μ is the coefficient of static friction, m is the mass of the rider, and g is the acceleration due to gravity.

Putting it all together, we have:

ω^2 = (μmg) / mr

Plugging in the given values, we get:

ω^2 = (0.15)(mg) / (5m)

where g is approximately 9.81 m/s^2.

Simplifying:

ω^2 = 0.03g

ω = sqrt(0.03g)

ω = sqrt(0.03 x 9.81)

ω = 0.558 rad/s

Thus the value of angular velocity is 0.558 radians per second.

For such more questions on angular velocity:

brainly.com/question/20432894

#SPJ11

Answer:

please make me brainalist and keep smiling dude

Explanation:

Answer:

Explanation:

Nagar Panchayat (for an area in transition from rural to the urban area);

Nagar Panchayat (for an area in transition from rural to the urban area);Municipal Council for the smaller urban area; and.

Nagar Panchayat (for an area in transition from rural to the urban area);Municipal Council for the smaller urban area; and.Municipal Corporation for a larger urban area.

Answer:

Explanation:

b. orbit

The total flow of electricity from the source is equivalent to the sum of the currents through each path. To calculate the total impedance in a parallel circuit, use the method below : 1/Rt Equals 1/R1 + 1/R2 + 1/R3 +...

IT = VT/RT or I total = V total / R total or the total current = the total voltage / the total resistance.

Current still flows along the other routes even if one of the parallel ones is blocked.

R_total = R1 + R2 +... + Rn The sum of all individual resistances makes up the system's overall resistance. Take the example issue below as an

example. A resistor with a 100 ohm electrical resistance value is linked to a resistor with a 200 ohm electrical resistance value.

To learn more about resistance, visit -

https://brainly.com/question/28135236

#SPJ1

The term used to describe the maximum distance that a sound wave displaces air molecules from their original undisturbed position is called the amplitude

The term used to describe the maximum distance that a sound wave displaces air molecules from their original undisturbed position is called the amplitude of the sound wave. Amplitude refers to the magnitude of the wave's displacement and is typically measured in decibels (dB).

The higher the amplitude of a sound wave, the louder the sound will be perceived by our ears. The amplitude of a sound wave is determined by the amount of energy that the sound wave carries. A sound wave with a higher amplitude will have more energy and thus will displace air molecules more strongly than a sound wave with a lower amplitude.

Learn more about amplitude here

brainly.com/question/1686242

#SPJ4

The driver should be at least 39 meters behind the vehicle in front at 30mph. Rounded to 2 significant figures, this is 39 meters

The recommended safe following distance while driving is at least 3 seconds behind the vehicle in front of you. At 30mph (or approximately 13 meters per second), a 2-second following distance would be:

3 seconds x 13 meters/second = 39 meters

Therefore, the driver should be at least 39 meters behind the vehicle in front at 30mph. Rounded to 2 significant figures, it could then be concluded that the driver should be at least 39 meters.

learn more about recommended safe following distance: https://brainly.com/question/30549283

#SPJ1

Answer:

In my opinion, Ronaldo

Explanation:

Ronaldo, who holds the record for most Champions League goals of all time, leads Messi by one on that trophy count. Messi, meanwhile, has a greater number of domestic cups and league titles.

What do you think?

Answer:

In my opinion, it's Christiano Ronaldo. But why is Ronaldo better than Messi?

Explanation:

Ronaldo is a more complete player.

His ability to jump and head balls was flawless. Ronaldo is such a complete player, emphasising his complete nature, that he is dangerous in every minute of the game. This is demonstrated by him being the first player in football history to score in every minute of a 90-minute game.

Answer:

We can use Coulomb's law to solve this problem:

F = k * q1 * q2 / r^2

where F is the force between the two charges, k is Coulomb's constant (k = 9 x 10^9 N m^2 / C^2), q1 and q2 are the magnitudes of the charges, and r is the distance between them.

We know the force F, the distance r, and the magnitude of one of the charges q1. We can rearrange the equation to solve for the magnitude of the other charge q2:

q2 = F * r^2 / (k * q1)

Substituting the values we have:

q2 = (250 N) * (0.15 m)^2 / (9 x 10^9 N m^2 / C^2 * 6.5 x 10^-5 C)

Simplifying:

q2 = 8.65 x 10^5 C

Therefore, the magnitude of the other charge is 8.65 x 10^5 C.