The correct power supply connector designed to provide power to a new hard drive is the 15-pin SATA connector.
What are power supply connectors?Power supply connectors are devices that connect a power supply unit (PSU) to various components in a computer. The PSU converts the alternating current (AC) from the wall outlet into direct current (DC) which is used by the computer's components.
There are several types of power supply connectors, including:
ATX Main Connector: This is the main 24-pin connector that connects the PSU to the motherboard. It provides power to the CPU, memory, and other components on the motherboard.
ATX 12V Connector: This 4/8-pin connector provides additional power to the CPU. It is also known as the P4 connector or the AUX connector.
PCI-Express Connectors: These 6/8-pin connectors provide power to graphics cards that use the PCI-Express interface.
SATA Connectors: These connectors provide power to storage devices such as hard drives and solid-state drives that use the SATA interface.
Molex Connectors: These connectors provide power to devices such as fans, lights, and other components that do not require as much power as the devices mentioned above.
It's important to make sure that the power supply has the right connectors for the components in the system, and that the power supply has enough power to support the system.
SATA (Serial ATA) is the standard interface for connecting storage devices, such as hard drives and solid-state drives, to a computer's motherboard. The 15-pin SATA power connector provides power to the storage device, it is typically a L-shaped connector with 15 pins arranged in two rows.
It is important to note that there are other connectors like 4 pin molex and 4 pin PATA that are used in older computers and devices, but the 15-pin SATA connector is the most common one used in recent computers and devices.
To know more about hard drive visit:
https://brainly.com/question/14953384
#SPJ4
Consider the method seqSearch, which implements a sequential search algorithm.
public int seqSearch(int[] arr, int target)
{
for (int j = 0; j < arr.length; j++)
{
if (arr[j] == target)
{
return j;
}
}
return -1;
}
Consider another method, seqSearch2, which modifies seqSearch to use an enhanced for loop.
public int seqSearch2(int[] arr, int target)
{
for (int j : arr)
{
if (j == target)
{
return j;
}
}
return -1;
}
Which of the following best describes the difference in the behavior of seqSearch2 relative to seqSearch as a result of the modification?
According to the question, seqSearch2 is more efficient than seqSearch because it uses an enhanced for loop.
What is loop?
Loop is a programming construct that allows a set of instructions to be repeated a fixed number of times. The instructions can be a single statement or a block of code. The loop construct is often used to iterate through a set of data, such as a list or an array. A loop is typically denoted by a loop keyword, such as while or for, followed by a block of code. The loop will execute the code block until a condition is met, such as a boolean expression becoming false, or a certain number of iterations has been reached. The statements within the loop are executed once for each item in the collection.
To learn more about loop
https://brainly.com/question/16922594
#SPJ4
Given positive integer numInsects, write a while loop that prints that number doubled without reaching 200. Follow each number with a space. After the loop, print a newline. Ex: If numInsects = 8, print:8 16 32 64#includeusing namespace std;int main() {int numInsects = 0;numInsects = 8; // Must be >= 1while (numInsects < 100) {numInsects = numInsects * 2;cout << numInsects << " ";}cout << endl; return 0;}So my question is what am I doing wrong?
A for loop or a do-while loop may be inserted inside of a while loop. The while loop verifies the condition after each iteration, which is the primary cause of Why While being substantially slower.
Give a brief explanation of the while loop.Until a condition is satisfied, a "While" Loop is used to repeatedly run a certain block of code. For instance, we don't know how frequently a user will enter a greater number if we ask for a number between 1 and 10.
Are while and the for loop equivalent?While the program is running, the statements are continually executed using the for and while loops, respectively.
To know more about do-while loop visit :-
https://brainly.com/question/15690925
#SPJ4
2 points question at position 22 an ip address is composed of 48 bits that are grouped together into 8-bit octets and are represented by a decimal number from 0 to 255. true or false
The correct answer is True. 2 points question at position 22 an ip address is composed of 48 bits that are grouped together into 8-bit octets and are represented by a decimal number from 0 to 255.
Each machine connected to the network is identified by its associated address thanks to the IP protocol. This address, which we'll call a "host," is a 32-bit IPv4 number that has to be unique for each server or computer. The IP addresses are often shown as four 8-bit decimal cyphers separated by dots. An IP address is commonly structured as four 8-bit fields separated by periods and expressed as decimal numbers. A byte of the IP address is represented by each 8-bit field. Dotted-decimal format is a common name for this way of displaying the bytes in an IP address.
To learn more about bits click the link below:
brainly.com/question/30273662
#SPJ4
which of these is true of layout decisions in operations system design?multiple choice question.layouts tend to negatively affect worker morale.layouts can be implemented in a short time framelayout decisions require substantial monetary investments
The true statement is A: layout decisions require substantial monetary investments. Layout decisions in operations system design can involve significant monetary investments.
This is because the layout of a facility or manufacturing plant can have a major impact on productivity, efficiency, and safety. To create an effective layout, companies may need to purchase new equipment, make changes to the physical space, or hire consultants to help with the design process. Additionally, the implementation of new layouts may require employee training and retooling, which can also be costly. While layouts can be implemented in a short time frame and may not necessarily negatively affect worker morale, the financial investment required in layout decisions is substantial.
Learn more about Layout decisions: https://brainly.com/question/28885680
#SPJ4
write a program that outputs radius is followed by the value of hemisradius to three digits after the decimal point. on the next line, the program outputs volume is followed by the value of hemis volume to seven digits after the decimal point. end with a newline.
HemiRadius Calculator is a program that outputs radius is followed by the value of hemisradius to three digits after the decimal point.
Write a program that outputs radius is followed by the value of hemi radius to three digits after the decimal point?
#include <stdio.h>
#include <math.h>
int main(void) {
double radius, volume;
radius = 5;
volume = (4 * M_PI * pow(radius, 3)) / 3;
printf("radius is %.3f\n", radius);
printf("volume is %.7f\n", volume);
return 0;
}
#include <iostream>
#include <math.h>
int main(){
double radius = 4;
double hemisphere_radius = radius/2;
double hemisphere_volume = (4/3)*M_PI*pow(hemisphere_radius, 3);
std::cout.setf(std::ios::fixed);
std::cout.setf(std::ios::showpoint);
std::cout.precision(3);
std::cout << "Radius: " << hemisphere_radius << std::endl;
std::cout.precision(7);
std::cout << "Volume: " << hemisphere_volume << std::endl;
return 0;
}
It stores the radius of the hemisphere in the double variable "radius" and the hemisphere radius in the double variable "hemisphere_radius".
The hemisphere volume is calculated using the formula for a sphere and stored in the double variable "hemisphere_volume".
Finally, the program outputs the radius and volume of the hemisphere to the console with the appropriate precision.
To learn more about the radius and volume of a hemisphere refer to:
brainly.com/question/17169908
#SPJ4
Intro to JAVA Please see below:
Write a program that reads in the first and last name of a person and prints the last name, followed by a comma, a space, and the first name. For example:
Please enter your first and last name: Harry Morgan
Morgan, Harry
CODE BELOW:
import java.util.Scanner;
public class Name
{
public static void main(String[] args)
{
Scanner in = new Scanner(System.in);
System.out.print("Please enter your first and last name: ");
// Read in the first and last name
// Print the last name, a comma, a space, and the first name
System.out.println(......);
}
}
Here is a possible solution:
import java.util.Scanner;
public class Name {
public static void main(String[] args) {
Scanner in = new Scanner(System.in);
System.out.print("Please enter your first and last name: ");
String name = in.nextLine();
// Split the input string into an array of words
String[] parts = name.split(" ");
// Print the last name, a comma, a space, and the first name
System.out.println(parts[1] + ", " + parts[0]);
}
}
This program prompts the user to enter their first and last name, using the nextLine() method to read the input as a string. It then uses the split() method to split the input string into an array of words, using a space as the delimiter. The last name will be at index 1 and the first name will be at index 0 of the array. Finally, it prints the last name, followed by a comma, a space, and the first name using the println() method.
Learn more about code in here https://brainly.com/question/497311
#SPJ4
Answer:
import java.util.Scanner;
public class Name
{
public static void main(String[] args)
{
Scanner in = new Scanner(System.in);
System.out.print("Please enter your first and last name: ");
// Read in the first and last name
String firstN = in.next();
String lastN = in.next();
// Print the last name, a comma, a space, and the first name
System.out.println(lastN + ", " + firstN);
}
}
Explanation:
true/false. brandon is assisting an internal employee with their mobile device. upon further diagnosing, brandon can see that the mobile device is currently not opening one of the company's applications. to further assist brandon will begin to do some troubleshooting.
Smart phones, fridges, watches, door locks, bicycles, medical sensors, fitness trackers, smart security systems, and other connected devices are a few examples of IoT products.
What are IoT products?The "Internet of things" (IoT) is a term used to describe physical objects (or collections of such objects) that are outfitted with sensors, computing power, software, and other technologies and may exchange data with one another over the Internet or other communications networks.
Devices just need to be individually addressable and connected to a network[6], not the entire internet, which has led to criticism of the phrase "internet of things."
The convergence of various technologies, including machine learning, ubiquitous computing, affordable sensors, and increasingly potent embedded systems, has altered the field.
The traditional domains of embedded systems, wireless sensor networks, control systems, and automation enable the Internet of things (including home and building automation).
Hence, Smart phones, fridges, watches, door locks, bicycles, medical sensors, fitness trackers, smart security systems, and other connected devices are a few examples of IoT products.
learn more about IOT click here:
https://brainly.com/question/19995128
#SPJ4
which of the following is used to perform a scan of the network and create a network topology chart?
A single network scan can be used to generate a variety of intricate network diagrams using SolarWinds Network Topology Mapper (NTM), an all-in-one automated network diagram maker.
With the use of the tool Wireshark, packet traces may be watched, recorded, and examined. To use Wireshark to get a capture of your network traffic, please follow the instructions below. Statements classifying information risks, setting reasonable security objectives, and specifying the methods for accomplishing these objectives make up a security policy. A single network scan can be used to generate a variety of intricate network diagrams using SolarWinds Network Topology Mapper (NTM), an all-in-one automated network diagram maker.
Learn more about network here-
https://brainly.com/question/14668983
#SPJ4
1.4.3 manage files next resource listen to simulation instructions to help pay your way through your sophomore year in college, you are working part time at a local business. the owner of the business is allowing you to use the company laptop on which to do your school work. your major requires you to take latin 101 and you want to create and organize a few goals for this course. in this lab, your task is to: create a new folder named latin 101 in the documents folder on your computer. copy the d:\course goals template.docx file to the documents\latin 101 folder. rename documents\latin 101\course goals template.docx to documents\latin 101\latin 101 goals.docx.
In order to finish this task, you must create a new folder called "Latin 101" in the "Documents" folder on your computer, copy the file "Course Objectives template.docx" from drive D to the new folder, and then rename the copied file "Latin 101 goal.docx."
The required details for Documents folder, in given paragraph
What steps are required to complete this task?On your computer, click "My Files."
The folder "latin 101" should be created in your Documents folder.
The "Course Objectives Template.docx" file can be found on drive D.
The Latin 101 folder in your Documents folder should have the Course Objectives template.docx file copied over to it.
Latin 101 goal.docx should be the name of the file that was copied to the Latin 101 folder.
To learn more about the Documents folder, visit:
brainly .com/question/29857041
#SPJ4
You have Azure subscription that includes virtual network named VNet1 in West US region.
You plan to deploy following container instances:
Instance1, running Windows container image in West US region
Instance2, running Linux container image in West US region
Instance3, running Windows container image in East US region
Which container instances can be connected to VNet1?
Select only one answer.
Instance1 only
Instance2 only
Instance1 and Instance2 only
Instance1 and Instance3 only
Instance1, Instance2 and Instance3
Answer:
Instance 1 and 2
Explanation:
To connect a container instance to a virtual network (VNet) in Azure, the container instance must be deployed in a subnet of the VNet. Therefore, to determine which container instances can be connected to Vnet1, we need to know which subnets are associated with Vnet1.
Assuming that Vnet1 has at least one subnet in each region, the following container instances can be connected to Vnet1:
Instance1: If there is a Windows container subnet in the West US region associated with Vnet1, then Instance1 can be connected to Vnet1.
Instance2: If there is a Linux container subnet in the West US region associated with Vnet1, then Instance2 can be connected to Vnet1.
Instance 3: If there is a Windows container subnet in the East US region associated with Vnet1, then Instance3 can be connected to Vnet1.
It's important to note that container instances can only be connected to a single VNet and must be in the same region as the subnet to which they are connected.
Learn more about container instances in Azure and virtual networks (VNets):
brainly.com/question/30381320
#SPJ2
The question is incomplete but probably the full question is:
You plan to deploy following container instances:
•Instance1, running Windows container image in West US region
•Instance2, running Linux container image in West US region
•Instance3, running Windows container image in East US region
Which container instances can be connected to Vnet1?
Hands washing should last a minimum of 15 second true or false
Wet your hands with warm or cold running water, turn off the water, and apply soap. Rub the soap into your hands to make a lather. Massage the backs of your hands, between your fingers, and under your nails with the soap. Rub your hands together for at least 20 seconds /ᐠ .ᆺ. ᐟ\ﾉ
declare two double variables, one named length with a value of 3.5 and the other named width with a value of 1.55. java
two double variables, one named length with a value of 3.5 and the other named width with a value of 1.55 in java like this
double length = 3.5; double width = 1.55;
In Java, double is a data type that can store decimal values. It is a 64-bit floating-point data type and is used to represent numbers with a fractional component. The double data type is often used when precise decimal values are needed, such as in financial or scientific calculations. The range of a double is approximately ±5.0 x 10^−324 to ±1.7 x 10^308 with a precision of 15 to 17 decimal digits.
For example:
double myDouble = 3.14;
You can also declare a double variable without assigning a value to it initially, and then assign a value to it later in your code.
For example:
double myDouble;
myDouble = 3.14;
You can also declare multiple double variables in a single line:
double length = 3.5, width = 1.55;
Learn more about data types here:
https://brainly.com/question/26352522
#SPJ4
What conclusions can you draw about how to properly get information from the user and about when you do and do not need to typecast the variables when used in the print() function?
Answer:
Explanation:
When getting information from the user, it is important to properly format the input prompts to ensure that the user understands what information is being requested. This can be done by providing clear and concise instructions and using appropriate data types (e.g. string, integer, etc.).
When using variables in the print() function, it is important to ensure that the variables are of the appropriate data type. This can be done by using the proper typecasting, such as using the int() function to convert a string to an integer. Failure to do so can lead to unexpected errors and unexpected results.
It's also important to consider the security aspect of the input, it's best to use appropriate method to validate the user input, such as using the built-in functions like int() or float() to validate user input with numbers and using the python module 're' to validate patterns in user input.
In summary, proper formatting and typecasting of variables are important to ensure the accuracy and integrity of the data being used in the print() function, and to ensure that the user's input is properly understood and processed.
You are designing a multi-tiered application that will be hosted on Azure virtual machines. The virtual machines will run Windows Server. Front-end servers will be accessible from the Internet over port 443. The other servers will NOT be directly accessible over the Internet.
You need to recommend a solution to manage the virtual machines that meets the following requirement:
Allows the virtual machine to be administered by using Remote Desktop.
Minimizes the exposure of the virtual machines on the Internet.
Which Azure service should you recommend?
Select only one answer.
Azure Bastion
Service Endpoint
Azure Private Link
Azure Front Door
I would recommend using Azure Bastion.
What is Azure Bastion?Azure Bastion is a fully managed service that allows you to remotely access your virtual machines securely via Remote Desktop Protocol (RDP) or Secure Shell (SSH) directly from the Azure portal.
This means that you can access the virtual machines without having to expose them directly to the internet, as the connection is made through Azure's infrastructure.
Additionally, Azure Bastion uses multi-factor authentication, which helps to further minimize the exposure of virtual machines on the internet.
It also integrates with Azure Active Directory which makes it easy for users to authenticate and access the virtual machines.
Read more about virtual machines here:
https://brainly.com/question/29815313
#SPJ1
How to input out smaller cars get better gas mileage tiny cars get great fuel
Answer:
The program displays word pairs that differ between the two sentences. One pair is displayed per line.
Ex: If the input is:
Smaller cars get better gas mileage
Tiny cars get great fuel economy
then the output is:
Smaller Tiny
better great
gas fuel
mileage economy
Hint: Store each input line into a list of strings.
Explanation:
connection is the only direct connection between sender and receiver and is at the physical layer, where actual 1s and 0s are transmitted over wires or airwaves
Yes, The physical layer is responsible for the direct connection between the sender and receiver and the physical transmission of data.
The physical layer is the lowest layer of the OSI (Open Systems Interconnection) model, and it is responsible for the actual physical transmission of data. This includes the movement of 1s and 0s over wires or airwaves, and it is the only direct connection between the sender and receiver.
The physical layer is responsible for the mechanical, electrical, and functional connections between the network devices, as well as the physical transmission of data. It defines the electrical and mechanical specifications for the transmission medium, such as the type of cable or wireless transmission method used, and the signaling method used to transmit the 1s and 0s.
The physical layer also deals with issues such as signal attenuation, noise, and errors that can occur during the transmission of data. It ensures that the data is transmitted correctly and without errors by using techniques such as error detection and correction.
Learn more about OSI model here:
https://brainly.com/question/29693072
#SPJ4
In a network access control (nac) system, the two different types of software agents that are commonly used are nonpersistent and persistent agents.TrueFalse
True. Nonpersistent agents are temporary software that are installed on a device for a specific period of time and then removed. Persistent agents are software that remain installed on a device even after the device is rebooted or the user logs off.
What is network access control (nac) system?
A Network Access Control (NAC) system is a security solution that controls and monitors network access for all devices attempting to connect to a network.
NAC systems use software agents to enforce security policies and ensure that only authorized devices and users are granted access to the network. They can also be used to detect and prevent security threats and vulnerabilities.
To learn more about Network Access Control (NAC), visit: https://brainly.com/question/29462344
#SPJ4
You plan to deploy the following Azure web apps:
WebApp1, that runs on Windows Server 2016
WebApp2, that runs on Windows Server 2022
WebApp3, that runs on Ubuntu Server
WebApp4, that runs on Red Hat Enterprise Linux
You need to create the app service plans for the web apps.
What is the minimum number of app service plans that should be created?
Select only one answer.
1
2
3
4
The minimum number of app service plans that should be created is 4. The correct option is D.
What is WebApp1?Red Hat does not charge for the services and support it provides, but developers are not paid for the Red Hat Developer Subscription. Developers who download RHEL are urged to utilize it.
HAving developers renew their subscriptions once a year is one way to accomplish this. Red Hat products are supposedly pricey, but if you join the Red Hat Developer Program, which has a $0 enrollment fee, you can use RHEL 8 for free. It enables individual developers to use RHEL.
Therefore, the correct option is D. 4
To learn more about WebApp1, refer to the link:
https://brainly.com/question/29529820
#SPJ1
A technique that refers to the process of finding out what is on the target system, such as what servers, computers, and printers are on the network is called
A technique that refers to the process of finding out what is on the target system, such as what servers, computers, and printers are on the network is called Enumeration .
What are enumeration and scanning?
The attacker starts to "touch" the computers during the scanning and enumeration phase. To find active hosts and open ports, attackers will search networks.
Once the live hosts and ports have been identified, they will enumerate them in order to find services, machine names, and other network resources.
What are reconnaissance and footprinting?
The process of reconnaissance, which encompasses footprinting, is more involved. As part of ethical hacking, you obtain information about the target system during reconnaissance.
This information may comprise everything from network architecture to employee contact information.
Learn more about Enumeration
brainly.com/question/13068603
#SPJ4
Which of the following is an example of an IPv4 address?
O 11000000.10101000
O 192.168.100.25
O 192.168.100
O 11000000
192.168.100.25 is an example of an IPv4 address because the give address follow a 32-bit numerical label.
What exactly is an IPv4 address?
An IPv4 address is a 32-bit numerical label assigned to every device connected to a computer network that uses the Internet Protocol for communication.
An IPv4 address is typically written as four groups of numbers separated by dots (periods), such as 192.168.100.25. Each group of numbers can range from 0 to 255, and the address as a whole is unique to each device on the network.
For example, the IP address 192.168.100.25 could be assigned to a specific computer on a local network, while another device on the same network may have the IP address 192.168.100.26. The IP address allows devices to communicate with each other by routing data packets to their intended destination.
To learn more about IPv4 address, visit: https://brainly.com/question/14219853
#SPJ4
which of the following is one of the management and people changes posing a major challenge in the business use of information systems? group of answer choices big data online collaboration iot cloud computing. mobile platform.
Online collaboration is one of the management and people changes posing a major challenge in the business use of information technology
Online collaboration is one of the management and people changes posing a major challenge in the business use of information systems. This is due to the fact that it is becoming increasingly important for businesses to be able to communicate and collaborate with each other in order to stay competitive. Online collaboration provides an efficient and cost-effective way to do this. It involves the use of technology to facilitate communication between employees, customers, and partners, enabling teams to work together more efficiently and effectively. It also allows for the sharing of ideas and resources in real-time while reducing the need for physical meetings and travel. However, due to the complexity of the technology involved, there is a need for businesses to invest in training and support for staff to ensure that they are able to make the most of the technology. Additionally, there are also various legal and security considerations that must be taken into account when implementing online collaboration systems.
Learn more about Information technology here:
brainly.com/question/12947584
#SPJ4
Managing information systems in modern organizations is a difficult and complex task. Which of the following factors does NOT contribute to this?
O Business people are customers of the IT department.
O Technology is getting cheaper to acquire, operate, and maintain.
O If technology is not working, many firms cannot function.
O Both end users and IT employees have responsibility for systems.
B. Technology is becoming less expensive to acquire, operate, and maintain. This factor does not contribute to managing information systems in modern organizations is a difficult and complex task.
What is Information systems?
A business information system is a collection of people, information technology, and business processes that work together to achieve a common goal
Information systems are a collection of interconnected elements that work together to collect, process, store, and distribute information to aid in organisational coordination, visualization, analysis, and decision-making.
The information system is a collection of software, hardware, and telecommunications networks that people create and use to collect, create, and distribute useful data, primarily in organisational settings.
To learn more about Information systems, visit: https://brainly.com/question/24944623
#SPJ4
T/F the first four-species calculating machine, which means that it is able to perform all four basic operations of arithmetic, was built by von neumann.
The answer of the following statement of basic operations of arithmetic, was built by von neumann is false.
What is operations?
Operations in computer science is an area of study that focuses on the management and optimization of computing resources. It includes the design, implementation, and assessment of algorithms, data structures, and systems that allow for efficient and effective operation of computer hardware and software. Operations are critical to the success of computer systems, as they provide the means to efficiently utilize the hardware and software resources available. Operations research and system analysis are two important aspects of operations, as they provide the means to improve system performance, reliability, and scalability.
The first four-species calculating machine was built by Charles Babbage.
To learn more about operations
https://brainly.com/question/20837448
#SPJ4
exercise 3 (decompress vector test: 2 points). complete the function decompress vector(d) that takes a compressed vector d, which is a dictionary with keys for the indices (inds) and values (vals), and returns the corresponding full vector. for any repeated index, the values should be summed. the function should accept an optional parameter, n, that specifies the length of the full vector. you may assume this length is at least max(d['inds']) 1.
The function decompress vector(d) takes a compressed vector d, which is a dictionary with keys for the indices (inds) and values (vals), and returns the corresponding full vector.
What the function does?The full vector is created by summing up the values for each index, and filling in any missing indices with zeroes.If an optional parameter n is given, the full vector will be of length n, with any additional indices filled with zeroes. If n is not given, the full vector will be of length max(d['inds']) + 1.This function is useful for efficiently representing and manipulating sparse vectors.def decompress_vector(d, n=None):"""
This function takes a compressed vector d, which is a dictionary with keys for the indices (inds) and values (vals). It returns the corresponding full vector. For any repeated index, the values should be summed.An optional parameter, n, can be specified to define the length of the full vector. Parameters----------
d : dictionary
a compressed vector with 'inds' and 'vals' keys
n : int, optional
the length of the full vector (the default is None)
Returns
-------
full_vec : list
a list representation of the full vector
"""
# handle optional parameter
if not n:
n = max(d['inds']) + 1
# create full vector
full_vec = [0] * n
for i, v in zip(d['inds'], d['vals']):
full_vec[i] += v
# return
return full_vec
To learn more about vector compression refer to:
https://brainly.com/question/14742815
#SPJ4
Toward the top of the "Grades" page, you can sort your grades using the "Arrange by" drop down. Which of the following is NOT a valid sorting option? A. Module B. Due Date C. Title D. Assignment E. Group
Group (E) is not a valid sorting option. Group is not a sorting option available on the "Grades" page.
What is title?A title is a word, phrase, or sentence that is used to identify a book, article, song, movie, TV show, or other creative work. It is typically the first thing that a reader or viewer sees and its purpose is to provide a short, concise description of the content. Titles are important elements of any piece of writing, as they can help to capture the reader's attention and make them want to read or watch more.
The other options (A. Module, B. Due Date, C. Title and D. Assignment) are all valid sorting options.
To learn more about title
https://brainly.com/question/29352656
#SPJ4
When the power company decides to use manpower to bury its lines, it directly answers the ________ question
When the power company decides to use manpower to bury its lines, it directly answers the question of how the power lines will be installed or maintained.
What are power lines?Power lines are electrical cables or conductors that are used to transmit electrical energy from power plants to homes and businesses. They consist of one or more wires suspended on poles or towers, and are typically made of aluminum or copper. The wires are often insulated to prevent electrical current from escaping and to protect people and animals from electric shock. Power lines are classified based on their voltage levels, which can range from a few hundred volts to over a million volts. The most common power line voltage levels are 110-volt, 220-volt, and 440-volt. Power lines can be overhead, underground or a combination of both, and they are usually maintained by utilities companies.
To know more about conductors visit:
https://brainly.com/question/28582532
#SPJ4
which of the following is a good practice for controlling computer access? picking strong passwords and protecting them appropriately. leaving the device on and unlocked to make sure the work team members can use the device when you are at lunch. logging into systems with a shared user-id or password. storing access tokens in a central unlocked location.
A password is better off being longer. wherever possible, make use of at least 16 characters. Create passwords that are difficult to decode yet simple to remember. Use phrases or sentences while creating passwords to help with memory.
Which of the following is a good practice for device passwords?Utilize multiple-factor authentication (MFA). Even the most secure passwords have limitations. Along with your login and password, multi-factor authentication provides an additional level of security. In most cases, the extra factor is a token or a mobile phone app that you would use to verify that you are indeed trying to log in.Complicatedness loses to length. A password is better off being longer. wherever possible, make use of at least 16 characters.Create passwords that are difficult to decode yet simple to remember.Use phrases or sentences while creating passwords to help with memory. "Breadandbutteryum," as an illustration. The phrase "bread and butter delicious" will even work on some computers.A term that is preceded or followed by a single number, or a single word, should be avoided (e.g. Password1). To guess your password, hackers will consult word dictionaries and lists of popular passwords.Useless passwords include things like birthdays, the names of your kids or pets, the make or model of your car, and other details that people may know about you or have access to through social media. Hackers can access it if your buddies can.To Learn more About password refer to:
https://brainly.com/question/15016664
#SPJ4
listen to exam instructions you have just purchased a used laptop, and you want to configure it to hibernate when you press the power button. you edit the power options settings and enable hibernation. then you configure the power button to trigger hibernation. everything works fine for several weeks. one day, when you press the power button, the laptop does not hibernate. which of the following will best resolve this issue?
Go to the link marked Modify any settings that aren't currently functional. Remove a checkmark from the Turn on rapid startup box under "Shutdown settings."
How to activate hibernate?Your computer completely shuts down when you put it in hibernation, using no power at all. A hibernation file is stored on the hard disk and contains all of your open data, progress, all running programs.
Select "Save Changes" from the menu. Restart your computer after completing the procedures, give it some time to settle, then try to go into hibernation once more. In Windows 10, the Power Plan settings allow you to decide whether to conceal the Sleep and Hibernate options from the power button menu. Your computer's power button can be configured to enter hibernation when depressed as well.
To know more about hibernation, visit:
https://brainly.com/question/1884191
#SPJ4
question 8 a data analyst creates a spreadsheet with five tabs. they want to share the data in tabs 1-4 with a client. tab 5 contains private information about other clients. which of the following tactics will enable them to keep tab 5 private? select all that apply.
The right tactic to keep tab 5 private is:
B. Make a copy of spreadsheet, delete tab 5, then share the new file with the client.
C. Copy tab 1-4 into a separate spreadsheet, then share the new file with the client.
Here is the tactic that will enable them to keep tab 5 private:
Password-protecting the spreadsheet or the specific tab containing the private informationRestricting access to the spreadsheet or the specific tab to certain individuals or groups using permissionsRemoving the private information from tab 5 and storing it separately in a secure locationUsing a virtual private network (VPN) or other secure connection to share the spreadsheet with the clientEncrypting the spreadsheet or the specific tab containing the private information.The complete question is shown below.
Question 8 a data analyst creates a spreadsheet with five tabs. they want to share the data in tabs 1-4 with a client. tab 5 contains private information about other clients. which of the following tactics will enable them to keep tab 5 private? select all that apply.
A. Rename tab 5 to include the word "private" then share the spreadsheet with the client.
B. Make a copy of spreadsheet, delete tab 5, then share the new file with the client.
C. Copy tab 1-4 into a separate spreadsheet, then share the new file with the client.
D. Hide tab 5, then share the new file with the client.
Learn more about spreadsheet: https://brainly.com/question/8284022
#SPJ4
A program is designed to determine the minimum value in a list of positive numbers called numList. The following program was written
Which of the following can be used to replace so that the program works as intended for every possible list of positive numbers?
A. 0
B. 1000000
C. numList.length
D. numList[0]
D. numList[0] can be used to replace so that the program works as intended for every possible list of positive numbers. In this program, the goal is to determine the minimum value in a list of positive numbers called numList.
The variable "minVal" is initialized to a value that is meant to be replaced so that the program can work as intended for every possible list of positive numbers. The correct choice to replace this variable would be numList[0], as this would set the initial value of minVal to the first value in the numList. This way, as the program iterates through the rest of the list, it can compare each value to the initial value in numList, and determine the true minimum value of the list.
Learn more about minimum value: https://brainly.com/question/14316282
#SPJ4