You decide to start running to get ready for a cross country race. You run 8 miles north and stop to take a small break. You then run 3 miles west before finally running 7 miles south. What is the total distance that you traveled?

Answers

Answer 1

The total distance traveled will be 18 miles because distance and displacement are different.

While distance and displacement appear to have the same meaning, they actually have very different definitions and implications. Displacement is the measurement of "how far an object is out of place," whereas distance refers to "how much ground an object has covered during its motion."

Distance is the sum of an object's movements, regardless of direction. The distance can be defined as the amount of space an object has covered, regardless of its starting or ending position.

Δd = d1 + d2 + d3.....

The term "displacement" refers to a shift in an object's position. It is a vector quantity with a magnitude and direction. The symbol for it is an arrow pointing from the initial location to the ending place.

Displacement = Final position - Initial position

To learn more about displacement please visit-
https://brainly.com/question/11934397
#SPJ9


Related Questions

how fast do i have to go from b to c in order to average for the whole trip? write an equation expressing v2 (the speed i need to average going from b to c) in terms of the other symbols given: v1, δl1, δl2, and δt.

Answers

The average speed of the trip from B to C should be

V2=(ΔL2V1)/(ΔtV1 - ΔL1)

The journey from B to C should be made at an average speed of

 <V> = ΔL/Δt

The entire voyage must take at least

Δt=Δt1+Δt2

Δt - Δt1=Δt2.....eqn.(i).

V1 =ΔL1/Δt1..... eqn.(ii) and V2=ΔL2/Δt2

substituting (Δt - Δt1=Δt2 ) from eqn(i) in the above eqn

V2=ΔL2/(Δt - Δt1)

and substituting the value of Δt1 from eqn(i) in the above equation

V2=ΔL2/(Δt - (ΔL1/V1))

now by rearranging the terms we get

V2=ΔL2V1/(ΔtV1 - ΔL1)

What do mean by average speed?

The object's average speed is the total distance it travels in a predetermined amount of time. A scalar value is used to represent the normal speed. It is characterized by the magnitude and lacks direction.

Since speed is a scalar quantity, it lacks direction. It indicates the rate of a moving thing. When a particle's speed is high, it indicates that it is travelling quickly, and when it is low, it indicates that it is going slowly.

To learn more about average speed, visit:

https://brainly.com/question/16449892

#SPJ4

a pendulum of length 0.50 meters, mass 1.0 kilogram, and displacement angle 12 degrees has a period of 1.4 seconds. determine the period if the mass is doubled.

Answers

The period of pendulum is still the same at 1.4 seconds.

We need to know about pendulum experiment to solve this problem. The pendulum is a simple experiment to calculate gravitational acceleration. The gravitational acceleration can be calculated by

g = 4π² . L / T²

where g is gravitational acceleration, L is the length of the string and T is the period.

From the question above, we know that:

L = 0.5 meters

m1 = 1 kg

θ = 12⁰

m2 = 2 . m1

T1 = 1.4 seconds

Find the period of pendulum

g = 4π² . L / T²

T² = 4π² . L / g

T = √(4π² . L / g)

The period of a pendulum does not depend on the mass of the object, hence the period is still the same at 1.4 seconds.

Find more on pendulum at: https://brainly.com/question/26524032

#SPJ4

An artificial satellite moves at a steady 25,000 km/hr in a circular orbit around earth. is it accelerated?

Answers

Yes the motion is accelerated.

We have a artificial satellite that moves at a steady 25,000 km/hr in a circular orbit around earth.

We have to determine whether or not it is accelerated.

What is an Artificial Satellite ?

An artificial Satellite is a man - made artificial body placed in orbit round the earth or moon or another planet in order to collect information or for communication.

According to the question -

v = 25000 km/hr

Now for the motion to be accelerated the velocity must change with respect to time. But, the velocity here is constant. It should be kept in mind that the velocity is a vector quantity, its magnitude is constant but its direction keeps on changing in circular motion, and hence, its acceleration also changes.

Hence, yes the motion is accelerated.

To solve more questions on satellite motion, visit the link below-

https://brainly.com/question/23678067

#SPJ4

In a standard deck of cards, what is the probability of drawing a black card followed by drawing a heart? answer choices are in the form of a percentage, rounded to the nearest whole number.

Answers

Percentage of probability of drawing a black card followed by drawing a heart = 13%

Total cards in a deck of cards = 52

Total black cards in a deck of cards = 26

Probability of drawing a black card = (26/52) = (1/2)

Percentage of probability of drawing a black card = (1/2) × 100 = 50 %

Total hearts in a deck of cards = 13

There are 26 black card in a deck of 52 cards . Once the black card is drawn we are left with total of 51 cards. So, we can write

Probability of then drawing a heart = (13/51)

To get the probability of drawing a black card followed by drawing a heart we need to multiply the fractions together, so we can write

Probability of drawing a black card followed by drawing a heart = (1/2) × (13/51) = (13/102)

Percentage of probability of drawing a black card followed by drawing a heart = (13/102) × 100 = 12.74% = 13% (after round off)

To know more about Probability refer to the link:

https://brainly.com/question/13604758

#SPJ4

At+what+speed,+as+a+fraction+of+c,+will+a+moving+rod+have+a+length+80+%+that+of+an+identical+rod+at+rest?

Answers

At the speed of 0.44 c as a fraction of c, the moving rod will have a length of 80% that of an identical rod at rest.

The speed of the light is c.

c = 3.0 × 10⁸ m/a

Let the length of the moving rod be L.

Let the length of the rod at rest be l.

Length contraction of the rod is,

[tex]L= \sqrt{ 1 - \frac{ v ^{2} }{c ^{2} } \times l} [/tex]

The length of the moving rod is,

Length of moving road = 80% of the length of the rod at rest.

L = 80 % of the l.

[tex] = \frac{80}{100} [/tex]

= 0.80 l

The moving rod will have a length 80% that of an identical rod at rest at the speed of,

[tex]L ^{2} = (1 - \frac{ v ^{2} }{c ^{2} } )\times l ^{2} [/tex]

[tex] \frac{L ^{2}}{l ^{2} }= (1 - \frac{ v ^{2} }{c ^{2} } )[/tex]

[tex]v ^{2} = (1 - \frac{L ^{2}}{l ^{2} }) \: {c^{2} } [/tex]

[tex]v ^{2} = ( \sqrt{1 - \frac{L ^{2}}{l ^{2} }}) \: {c^{2} } [/tex]

[tex]= ( \sqrt{ 1 - \ \frac{0.80 \: l^{2}}{l ^{2} }}) \: {c^{2} } [/tex]

[tex] = \sqrt{( 1 - 0.80) } c[/tex]

v = 0.44 c

Therefore, at the speed of 0.44 c as a fraction of c, the moving rod will have a length of 80% that of an identical rod at rest.

To know more about length contraction, refer to the below link:

https://brainly.com/question/15868300

#SPJ4

it is known that a vertical force of 200 lb is required to remove the nail at c from the board. as the nail first starts moving, determine (a) the moment about b of the force exerted on the nail, (b) the magnitude of the force p that creates the same moment about b if (c) the smallest force p that creates the same moment about b.

Answers

(a) The moment about B is 800 lb.in

(b) The magnitude of the force P is 51.3lb

(c) The smallest force P is 44.4lb

(a)

As we know,

[tex]M_{B} = r_{CIB}F_{N}[/tex]

[tex]M_{B}[/tex] = [tex]4[/tex] × [tex]200[/tex]

= 800 lb.in

The moment about B is 800 lb.in

(b)

By using the formula,

[tex]M_{B} =r_{AIB}Psin[/tex]θ

θ = 120°

Then, [tex]800[/tex] = [tex]18[/tex] × [tex]Psin120[/tex]°

P = 51.3lb

The magnitude of the force P is 51.3lb

(c)

P must be perpendicular to the line connecting points A and B in order for it to be minimal.

Using the formula,

[tex]M_{B} = dP_{min}[/tex]

[tex]800[/tex] = [tex]18[/tex] × [tex]P_{min}[/tex]

[tex]P_{min}[/tex] = 44.4lb

The smallest force P is 44.4lb

Learn more about force here:

https://brainly.com/question/13191643

#SPJ4

steve walks 2 km due west. he then returns to walk south for 3 km. after visiting some friends, steven walks 5 km. determine stevens displacement and distance. which one is larger? by how much?

Answers

Distance is = 10 km and displacement is 4 km.

Steve walks 2 km due west. = -5i

They then return to walk south for 3 km. = -3j

After visiting some friends, steven walks 5 km. = - 5

Distance = 2 + 3 + 5 = 10 km

Displacement = [tex]\sqrt{(5)^2 - (3)^2}[/tex] = 4 km

Distance is a numerical or occasionally qualitative size of the way far aside gadgets or factors are. In physics or ordinary utilization, the distance may also consult with a bodily length or an estimation based totally on different criteria.

Distance is the whole motion of an object with no regard for the route. we are able to define distance as how plenty of ground an item has protected notwithstanding its beginning or ending point.

Displacement dimension, honestly a trade-in period, is typically done by counting the range of fringes because the item being measured is displaced. Displacement is a protection mechanism that includes a character shifting terrible feelings from one character or thing to another.

             

Learn more about distance here:-https://brainly.com/question/2854969

#SPJ9

numerical study on transient airflows and air exchange induced by door motion in thermally stratified environment

Answers

The correct answer is transient airflows under the combined motion of a  door and the force of buoyancy.

However, the combined airflow characteristics generated by door motion, ventilation airflow, and thermal impacts have not yet been thoroughly defined. Door motion has been acknowledged as playing a part in the confined conveyance between indoor and outdoor regions. This study employed dynamic CFD simulation to look at the transient airflow characteristics and amount of air exchange generated by door motions in a thermally stratified environment with displacement ventilation. The results show that at a door angle of 30°, there is a 40% air exchange even though only 15% of the overall door motion process is used during the initial phase. Two important contributing factors are the temperature difference between the air inside and outside, as well as the rotational speed of the  door.

The thermal convective flow may have a considerable impact on the airflow pattern through the doorway when the door motion is slow enough and the temperature difference is greater than 3 °C. The amount of air exchange rises linearly with door motion speed when there is no difference in temperature between the internal and exterior spaces. When buoyant force and door motion are coupled, a modest door speed yields minimal air exchange. Only the air temperatures close to the door are impacted by door movement. In the displacement ventilated room, a single door open and close cycle does not considerably reduce the overall temperature stratification. The research findings may help to improve knowledge of the consequences of dynamic disturbances in thermally stratified environments as well as offer recommendations for decreasing door motion-induced pollutant movement.

To learn more about transient airflows refer the link:

https://brainly.com/question/10980509

#SPJ4

Assume you have a solution with a ph = 5.0; what would be the new ph of that system if the h3o concentration is doubled (assuming kw = 1x10-14)?

Answers

The amount of acidity or basicity in an aqueous solution is determined by its pH. The concentration of hydrogen ions in the solution can be used to calculate and determine the pH of an aqueous solution.

An aqueous solution's pH is determined using the pH scale, which commonly refers to water and ranges from 0 to 14. (although as discussed below this is not an a formal rule). The pH scale classifies 7 as neutral. A pH value lower than 7 is regarded as acidic. The term "basic" then refers to a pH value greater than 7. High hydronium concentrations and low hydroxide concentrations are characteristics of acidic solutions. High hydroxide concentrations and low hydronium concentrations characterize basic solutions.

Learn more about hydronium concentrations here:

https://brainly.com/question/13387755

#SPJ4

When two or more atoms combine into a chemical compound, the force of attraction holding the atoms together is known as a ______. A. charge B. electric current C. bond D. magnetic pole

Answers

Answer:

rgg3ge4gg434g4g4g4g44g

Explanation:

grg4g4g4y44h44h

Suppose we want a satellite to revolve around the earth 6 times a day. what should the radius of its orbit be? (neglect the presence of the moon.)

Answers

We must use the principles of the balance of forces to resolve this exercise.

What is centrifugal force?

A hypothetical force called centrifugal force, which is unique to particles traveling in a circle, is a force that has the same strength and dimensions as the centripetal force, but acts in the opposite direction.

The force exerted on the satellite by the planet in this specific instance must be equal to the centrifugal force, that is

Fg =Fe

GMm/ r^2 = mw^2r

Where,

G = Gravitational Universal Constant

M = Mass of earth

m = mass of satellite

r = Distance/Orbit

By changing and rearranging the equation to find the orbit using the idea of Period through the Angular Velocity, we have,

r = 1.44 x 10^7 m

The orbit is 14400 kilometers

To learn more about Angular Velocity click on the link below:

https://brainly.com/question/20432894

#SPJ4

Consider the electronic transition from n = 7 to n = 4 in the hydrogen atom. is light absorbed or emitted? calculate the energy, the frequency and wavelength (nm) of the photon involved.

Answers

Energy for this electronic transition is ΔE=0.572eV frequency is ν=1.38×[tex]10^{14}[/tex] [tex]s^{-1}[/tex] and wavelength is 2.17×[tex]10^{-6}[/tex] m

The Bohr Model for the energy of an electron in a hydrogen atom gives us:

E=−[tex]\frac{13.6}{n^{2} }[/tex] eV

Where n is the principle quantum no

For the transition 7→4 the difference in energy is given by:

ΔE= -[tex]\frac{13.6}{49}[/tex]+[tex]\frac{13.6}{16}[/tex] eV

ΔE=0.85-0.277

ΔE=0.572eV

To convert this to Joules we multiply by the electronic charge:

ΔE=0.572×1.6×[tex]10^{-19}[/tex]=9.16×[tex]10^{-20}[/tex]J

(b)

To find the frequency of the emitted photon we use the Planck expression:

ΔE=hν

∴ν=ΔE/h=(9.16×[tex]10^{-20}[/tex])÷(6.626×[tex]10^{-34}[/tex])[tex]s^{-1}[/tex]

ν=1.38×[tex]10^{14}[/tex] [tex]s^{-1}[/tex]

To find the wavelength

λ=c/ν

(3×[tex]10^{8}[/tex])/(1.38×[tex]10^{14}[/tex]) m

=2.17×[tex]10^{-6}[/tex] m

Learn more about electronic transition here:

https://brainly.com/question/18156550

#SPJ4

what did edwin hubble discover about galaxies that allowed him to determine the expansion rate of the universe?

Answers

Edwin Hubble was an American astronomer who discovered a way to determine the rate of expansion of the universe through the relationship between the velocities of remote galaxies and their distances.

Mr. Hubble established what is known as Hubble's law, this law states that the greater the distance of a galaxy, the greater the speed at which it moves away from us, so both the law indicates that the large objects in the universe are moving away from each other steadily causing an unchanging expansion.

What is the Hubble constant?

It is a mathematical constant that expresses the expansion velocity of the universe at a distance from a point in space. Its value is 69.8 km/s/Mpc.

Learn more about Hubble constant at: brainly.com/question/4445423

#SPJ4

How has commercial logging affected water resources?

Answers

Answer:There are a lot of issues with deforestation. However, for some nations around the world, logging jobs provide stable sources of income that might otherwise be unavailable. But now new research is taking a deeper look into the consequences of logging and asking, at what cost?

So I narrow it down mostly to deforestation, cost , animal population, water resources and etc

Explanation:

Convert 300 m/s to mi/hr

Answers

Answer:

671.22 mi/hr

Explanation:

[tex](\frac{300 m}{s} )(\frac{1mi}{1609m} )(\frac{3600s}{1hr} )=\frac{(300)(3600)}{1609} =671.22mi/hr[/tex]

Hope this helps

vector a has a magnitude of 28 units and points in the positive y-direction. vector b is added to a, giving a resultant vector a b that points in the negative y-direction with a magnitude of 11 units. what is the magnitude and direction of b?

Answers

The magnitude of vector B is 39 units, and it is pointing to the negative y-direction.

How does the Triangle Law of Vector Addition work?

The triangle law of vector addition asserts that when two vectors are represented by two sides of a triangle with the order of magnitude and direction, the magnitude and direction of the resulting vector are represented by the third side of the triangle.

The formula for Resultant of vectors = vector sum of all the vectors.

We have been given that,Vector A = 28j,Vector B =?

So, Resultant of vector A and B = R

R = -11j

R = A + B

-11j = 28j + B

B = -11j - 28j

B= - 39j

Hence, the magnitude of vector B is 39 units, and it points towards the negative y-direction.

To know more about resultant of vectors,visit: https://brainly.com/question/28188107

#SPJ4              

Lab 2 uniform velocity why do you think it necessary to cut off the first few dots?

Answers

It is necessary to cut off the first few dots because a small distance between dots means the object was moving slow during that time interval.

What is Uniform velocity?

Uniform velocity is the state in which a body travels the same distance in the same amount of time.

The average velocity of a body is represented by the variable v in the equation (d = v t). If the magnitude and direction of the velocity do not change over time, the body is said to be moving at a uniform speed.

An example of constant velocity, or when a body moves with increasing speed at regular intervals, is the rotation of the Earth.

Uniform velocity is the state in which a body travels the same distance in the same amount of time. The average velocity of a body is given in the equation (d = v t), and its magnitude and direction are constant across time.

To know more about uniform velocity visit:

https://brainly.com/question/19818013

#SPJ4

What potential difference is needed to give a helium nucleus (q=2e) 75.0 kev of kinetic energy?

Answers

The potential difference is needed to give a helium nucleus (q=2e) 75.0 keV of kinetic energy is 37.5kV.

What is potential difference?

Potential difference is the difference in amount of energy that charge carriers have between two points in a circuit.

**Measured in Volts: **Potential difference is measured in volts (V) and is also called voltage. The energy is transferred to the electrical components in a circuit when charge carriers pass through them. We use a voltmeter to measure the potential difference (or voltage).

The potential Difference formula:** V = I x R**

The potential difference (which is the same as voltage) is equal to amount of current multiplied by the resistance. A potential difference of one Volt is equal to the one Joule of energy being used by one Coulomb of charge when it flows between two points in a circuit.

For the above question:

The kinetic energy K given to helium nucleus is equal to its potential energy, which is

E=q ∆ V

where q=2e is the charge of helium nucleus, and  is the potential difference applied to it.

Since we know kinetic energy, we have

E= K= 75 keV= q ∆ V

and from this we can find potential difference:

∆V= K/q= 75keV/2e= 37.5 kV

To know more about circuit visit: brainly.com/question/21505732

#SPJ4

5. (a) Calculate Earth's average speed relative to the Sun. (b) What is its average velocity over a period of one year?

Answers

a. The Earth's average speed relative to the Sun is 2970 m/s

b. The earth's average velocity over a period of one year is 0 m/s

(a) Calculate Earth's average speed relative to the Sun.

The speed of the earth relative to the sun is given by v = √(GM/r) where

G = universal gravitational constant = 6.67 × 10⁻¹¹ Nm²/kg², M = mass of sun = 1.989 × 10³⁰ kg and r = distance of earth from sun = 1.5043 × 10¹¹ m

Substituting the values of the variables into the equation, we have

v = √(GM/r)

v = √(6.67 × 10⁻¹¹ Nm²/kg² × 1.989 × 10³⁰ kg/1.5043 × 10¹¹ m)

v = √(13.26663 × 10¹⁹ Nm²/kg/1.5043 × 10¹¹ m)

v = √(8.8191 × 10⁸ Nm²/kg)

v = 2.97 × 10⁴ m/s

v = 2970 m/s

So, the Earth's average speed relative to the Sun is 2970 m/s

(b) What is its average velocity over a period of one year?

The average velocity of the Earth is v = ΔD/T where

ΔD = total dispalcement = D' - D where D = initial position of earth and D' = final position of earth and T = period of earth over one year = 365 days × 24 h/day × 60 min/h × 60 s/min = 31536000 s = 3.1536 × 10⁸ s

Now, since the earth starts and stopps at the same position, D' = D.

So, ΔD = D' - D = 0

Substituting the values of the variables into the equation, we have

v = ΔD/T

v = 0 m/3.1536 × 10⁸ s

v = 0 m/s

So, the earth's average velocity over a period of one year is 0 m/s

Learn more about Earth's average speed here:

https://brainly.com/question/13172011

#SPJ1

Two forces p and Q acting perpendicular to each other have a resultant of 50N. Given that the sum of p and Q is 70N calculate the value of the forces p and Q

Answers

According to the given statement,

The sum of p and Q is 70N , the value of the forces p and Q is

25N

What is magnitude?

"Distance or quantity" is how magnitude is simply defined. It shows how an object moves when it is in motion, whether that movement is absolute, relative, or of a certain size. It serves as a way to describe something's size or scope. Magnitude is a general term used in physics to describe size or distance.

In order to compare the speeds of a car and a bicycle, the magnitude can be used as an explanation. Additionally, it can be used to describe the length a particular object has travelled or the magnitude of an object's amount.

According to the given value,

The magnitude of Q= the horizontal component of the resultant force.

θ= 90°-30°= 60°

|Q|= 50cos 60°= 25N.

Hence, the sum of p and Q is 70N , the value of the forces p and Q is 25N.

To know more about magnitude , visit;

https://brainly.com/question/2596740

#SPJ9

the linear momentum of a bullet-gun system is zero before the gun fires. afterwards: i. the kinetic energy is zero ii. the momentum is zero group of answer choices i & ii i ii neither i nor ii

Answers

Answer:

Neither of the two options.

Explanation:

Before a bullet is fired, the momentum of the bullet-gun system is zero because of lack of velocity. After the gun is fired, both gun and bullet acquire velocity making them nonzero. Thus, it is impossible for the kinetic energy to be zero because both the bullet and the gun are in motion. Also, the momentum is nonzero momentum is the product of the mass of an object and its corresponding velocity. Once the bullet is fired, both the bullet and the gun gains momentum thus making it nonzero.

To learn more on Linear Momentum. Click, https://brainly.com/question/27988315

a well-insulated rigid tank contains 3 kg of a saturated liquid–vapor mixture of water at 200 kpa. initially, threequarters of the mass is in the liquid phase. an electric resistance heater placed in the tank is now turned on and kept on until all the liquid in the tank is vaporized.

Answers

The correct answer is ΔS=11.16kJ/K.

m=3kg

p_1=200kPa

m_f1=3/4m=2.25kg

x_2=1

ΔS=?

x_1=m_g/m=(m-_f1)/m=(3-2.25)/3=0.25

p_1=200kPa

v_f1=0.001061m^3/k g

v_g1=0.88578m^3/k g

s_f1=1.5302k J/k gK

s_fg1=5.5968 k J/kgK

With these data, we may solve for particular entropy in state 1 using the following equation:

s_1=s_f1+x_1g=1.5302+(0.25)(5.5968)

=2.9294 kJ/kgK

Entropy will be obtained in stage 2, but in order to do so, we must first compute a particular volume in state 1 that is identical to the one in state 2, as this is a constant volume process.

The formula for a particular volume is:

v_1=v_f1+x_1v_fg=0.001061+0.25(0.88578-0.001061)=0.22m^3/kg=v_2

Now, we may get particular entropy in state 2 using the Molier diagram for water.

p_2=1/v_2=1/0.22=4.55 kg/m^3

x_2=1⇒s_2=6.65kJ/kgK

Final entropy change is:

ΔS=m(s_2-s_1)

=3(6.65-2.9294)

ΔS=11.16kJ/K

To learn more about entropy refer the link:

https://brainly.com/question/14264445

#SPJ4

if we break the acceleration of this missile into two components, in the vertical and horizontal direction, what statement correctly characterizes the source of the acceleration?

Answers

Both horizontal and vertical acceleration is produced by the jet engines. While it does contribute to vertical acceleration, gravity has no effect on horizontal acceleration.

there's a particular value or velocity for the horizontal component. with out accounting for air resistance, the horizontal factor is regular for the duration of the flight.

Horizontal velocity affects the variety however not the period of an airborne object. Gravity reasons a downward vertical acceleration that has a price of 9.8 m/s/s.

This vertical acceleration reasons a downward projectile's vertical velocity to vary by 9.8 m/s in keeping with 2nd. The movement of a projectile's horizontal axis is unrelated to its vertical axis.

A projectile's trajectory is determined by using pace in two dimensions. The x and y components of the projectile, respectively, describe its horizontal and vertical pace. Meters are the devices used to signify each horizontal and vertical distances (m).

Know more about acceleration:

https://brainly.com/question/12550364

#SPJ4

What is the correct name, number of protons, neutrons, and electrons for the
following
41
19
K
O Potassium -19, 19 protons, 19 electrons, 22 neutrons
O Potassium-41, 19 protons, 19 electrons, 22 neutrons
O Potassium-19, 41 protons, 41 electrons, 19 neutrons
O Potassium-41, 41 protons, 41 electrons, 19 neutrons

Answers

Potassium-41, 19 protons, 19 electrons, 22 neutrons is the correct name, number of protons, neutrons, and electrons for the following ₁₉⁴¹K.

The correct option is B.

What does potassium mean?

The chemical element with the atomic number 19 and the letter K is potassium. Potassium is a silvery - white metal that may be cut with a knife quickly and painlessly. After only a few seconds of exposure, atmospheric oxygen and potassium metal combine to form flaky, white potassium peroxide.

How is low potassium treated?

Your potassium level may be affected by a medicine you're taking, or it may be brought on by a medical problem that needs to be treated. The underlying cause of low potassium is treated, which may entail potassium supplementation.

To know more about Potassium visit:

https://brainly.com/question/13321031

#SPJ9

The complete question is -

What is the correct name, number of protons, neutrons, and electrons for the following ₁₉⁴¹K.

A- Potassium -19, 19 protons, 19 electrons, 22 neutrons

B- Potassium-41, 19 protons, 19 electrons, 22 neutrons

C- Potassium-19, 41 protons, 41 electrons, 19 neutrons

D- Potassium-41, 41 protons, 41 electrons, 19 neutrons

grandfather clocks are decorative clocks with a pendulum measuring out the passing of a second. how long of a pendulum is needed to have a period of 1 second?

Answers

The length of a pendulum needed to have a period of 1 second is 0.24 meters or 24 centimeters.

A pendulum represents Simple Harmonic Motion,

The formula for the time period of a pendulum is

T = 2π √l/√g

Where l is the length of the pendulum and g is the acceleration due to gravity on Earth.

We are given that a pendulum has a period of 1 second

So,

1= 2π √l/√g

Squaring both sides

1 = 4π^2√ l/√g

l = g/ 4 π^2

l = 0.24 m

Hence, the length of a pendulum needed to have a period of 1 second is 0.24 meters or 24 centimeters.

To know more about the "movement of a pendulum", refer to the link given below:

https://brainly.com/question/15543716?referrer=searchResults

#SPJ4

If two isosceles triangles have non-base angles of 40, are they similar? justify your answer.

Answers

True, they are comparable. You would need to multiply the base angles on MNP by two to get 80. 100 will be the final angle. Although size is not mentioned, it is the only way that isosceles triangles might be comparable but incongruent.

What are isosceles triangles?

An isosceles triangle in geometry is one with at least two equal-length sides. It can be defined as having an equilateral triangle as an exception, or as having exactly two sides of equal length or at least two sides of equal length.

An isosceles triangle must have two sides that are the same length to be considered an isosceles triangle. The base of the triangle is the uneven side, and these two sides are referred to as its legs. Additionally, according to the isosceles triangle theorem, the angles that face each of the equal sides must also be equal.

To learn more about isosceles triangles from the given link:

brainly.com/question/2456591

#SPJ4

How much additional time will pass before the ball passes the tree branch on the way back down?

Answers

The additional time pass before the ball passes the tree branch on the way back down is 1.913 .

Consider the displacement equation

s(t) = (-g/2)t^2 + v(0)t + s(0)

where g = 9.8 m/s/s is the acceleration due to gravity,

v(0) = 15 m/s is the initial velocity, and

s(0) = 0 is the staring position (the ground).

We want to know when s(t) = 7 m. Thus,

7 = (-9.8/2)t^2 + 15t

We solve for t by solving the quadratic

(-9.8/2)t^2 + 15t - 7 = 0

Using the Quadratic Formula, we get the two roots

t1 = .574 seconds

t2 = 2.487 seconds

These two values represent the times when the ball passes the tree branch. Therefore, the total time between passing the branch is the difference between 2.49 seconds and 0.57 seconds.

Thus, the ball is at 7 meters at both times. The additional time after the first instance is

d = t2 - t1 = 2.487 - .574 = 1.913 seconds

To know more about " Displacement Equation"

Refer this link:

https://brainly.com/question/248054

#SPJ4

Human hox genes are in four clusters: hoxa, hoxb, hoxc, and hoxd, for a total of 39 genes. besides conserving the clustering of genes, evolution has also conserved ________.

Answers

Human hox genes are in four clusters: HOXA, HOXB, HOXC, and HOXD for a total of 39 genes. besides conserving the clustering of genes, evolution has also conserved the order of genes within them.

What is a gene?

A gene is the basic physical and functional unit of heredity. Genes are made up of DNA. Some genes helps to make molecules called proteins. However, many genes do not synthesis for proteins. Every person has two copies of each gene, one inherited from each parent. Most genes are the same in all people, but a small number of genes (less than 1 percent of the total) are slightly different among the people. Alleles are forms of the same gene with small differences in their sequence of DNA bases. These small differences contribute to each person’s unique physical features.

To learn more about genes, refer to:

brainly.com/question/8832859

#SPJ4

ow many times as strong is the coulomb repulsion between two electrons than the gravitational attraction between the same two electrons? (the distance does not matter.)

Answers

Fe/Fg = 4.2 x 10⁴² is the gravitational attraction.

Gm²/r² the gravitational attraction between two electrons is given by, where G is the gravitational constant, m is the electron mass, and r is the distance between the two electrons.

r = the distance between two electrons the size of the charge on each electron, or q, is 1.6 x 1019 C.

The mass of one electron, or m, is 9.1 x 1031.

The Coulomb force of repulsion is expressed mathematically as

Fe equals (9 x 109) k q/r2 (1.6 x 10-19) ²/r²

Fg = Gm2/r2 = 6.67 x 1011 is the formula for the gravitational force of attraction. (9.1 x 10⁻³¹) ²/r²

The formula for calculating Fe/Fg is [(9 x 109) (1.6 x 1019) 2/r2] / [(6.67 x 1011). (9.1 x 10^-31) ⁻³/r²]

Fe/Fg = 4.2x10⁴²

Learn more about gravitational attraction here:

https://brainly.com/question/19822389

#SPJ4

What is the distance traveled, in meters, by the particle between times t0 = 1.0 s and t1 = 3.0 s?

Answers

The displacement, in meters of the particle between times to = 1.0 s and t1 = 3.0 s is Ax= -1.58 and not Ar= - 1.58

In physics, how do you calculate distance travelled?

The route taken by a body to travel from a starting point to an ending location in a predetermined amount of time and at a predetermined speed is known as the distance travelled.

If the speed is constant, then Distance (d) = v*t (velocity multiplied by time).

How do you calculate a particle’s journey distance?

Take the integral of the absolute value of the velocity function to get the distance travelled by a particle given its velocity function.

In other words, the area under the velocity function’s curve’s absolute value equals the distance a particle travels.

Speed divided by time equals distance. Time is calculated as distance multiplied by speed.

To know more about distance covered by a particle, Visit:

https://brainly.com/question/28169666

#SPJ4

Other Questions
What rights does California's CCPA provide to California consumers? The dod's (department of defense) fire inspector course was orginally developed by the air force in 1967 and reduced fire loss across the air force by an estimated ____ percent over the next 10 years. Seventh Grade by Gray Soto and What was your reaction to victor lie? what does paragraph 15 reveal about why Sarai views the Visitors differently than her neighbors do? Patrick's friends are arguing about where they should go to dinner before they go to see a movie. Some want to go to a fast-food restaurant;others want to go to a fancier place. Patrick says, "Why don't we split up and eat in two groups? Then we can all meet at the cinema to enjoy themovie together?" Which part of Goldberg's OCEAN model does this BEST demonstrate? Demonstrate professionalism and leadership qualities when working with others and recognise the principles that underpin ethical and anti-discriminatory practice. to improve your listening efficiency, you should . a. disregard nonverbal behaviors and focus only on the words in the message b. focus only on gender communication differences c. paraphrase a speaker's message d. accept all assertions as factual statements a technician is configuring a new cisco 2960 switch. what is the effect of issuing the branchsw(config-if) You are trying to define your target market for a travel agency service. Identify the correct order of the market targeting steps: Select one: a. identify business needs, segment total market, profile target customer segment, research and validate marketing opportunity b. research and validate marketing opportunity, identify business needs, segment total market, profile target customer segment, research and validate marketing opportunity c. profile target customer segment, identify business needs, segment total market, research and validate marketing opportunity a glassy texture indicates: question 5 options: slow cooling variable rates of cooling very rapid cooling a lack of cooling help help help help help help help help help help help help help help help help help help help help help help help help help help help help help help help help help help help help help help help help help heheheheehheheehhe. Tell 3 things that students like you SHOULD/MUST DO in this situation. Use SHOULD or MUST DO in your answer. 1. in a church- 3 things. 2.in a birthday celebration - 3 things. Question 15 of 15How is the development status of a country determined (developed,developing, and so on)?A. The Human Development Index (HDI)B. Gross Domestic Product (GDP)C. Healthcare, Education, Sanitation, and Income (HESI)D. Newly Industrializing Country Index (NIC) find the distance between the points (5, 7) and (5, -3) Which events led to change in Europe and Asia during the late Middle Ages Chose all that are correct Fewer people lived in cities or towns so farm production increased Famine & plague spread death across Europe Christians clashed with Muslims in long and devastating warsMerchants moved between Europe, North Africa, the Middle East and Asia carrying both good and new knowledge wherever they traveled Learning declined strengthening feudalism Help?? Ill give brainliest :) Suppose there is currently a tax of $50 per ticket on airline tickets that is imposed on the consumers. if the tax is reduced from $50 per ticket to $30 per ticket, then the? Complete the sentence. 4ft= ____ in. Patterns in nature involve anything that happens over and over again. A pattern could repeat itself at a specific time of day, time of the month, or time of year. Describe one of these kinds of patterns In the diagram, PQRS is a square. (a) Show that triangles PQU, QRV, RSW and SPT are congruent. (b) Show that TUVW is a square. At times there could be many different anglo -saxon war -chiefs or kings . what problems could arise with this situation ?