You are traveling on an airplane. The velocity of the plane with respect to the air is 120 m/s due east. The velocity of the air with respect to the ground is 43 m/s at an angle of 30° west of due north.
1)What is the speed of the plane with respect to the ground?

Answer:

The swimmer must swim at 1.12 m/s at 26.565 ° upstream from the opposing bank, according to the parallelogram rule of vectors.

What is parallelogram law of vector addition?

If two vectors act along two consecutive sides of a parallelogram (with magnitude equal to the length of the sides) both heading away from the common vertex, then the resultant is represented by the parallelogram's diagonal passing through the same common vertex.

Explanation:

Let, the current's speed be x = 0.5 m/s, the swimmer's speed be y m/s and the angle between them be a°. The resulting speed at b° angle with x will be r = 1.0 m/s. Assuming b is 90°.

Then, the parallelogram law of vectors states that

Sin b = y Sin a/r

=> y Sin a = r

=> y Sin a = 1

And Cos b = (x + y Cos a)/r

=> y Cos a = -x = -0.5

Therefore, tan a = 1/ (-0.2)

=> tan a = -2

As a result, a = 116.565°

Consequently, y = 1/Sin a

=> y = 1/ Sin116.565°

=> y = 1.118 ≈ 1.12 m/s

To learn more about parallelogram law, click on the given link

https://brainly.in/question/30000335

#SPJ9

some options for you :) hope this helps!

The corresponding wavelengths for these jumps are as follows:

[tex]\lambda_{7-2}[/tex] = 397.7 nm

[tex]\lambda_{6-2}[/tex] = 411 nm

[tex]\lambda_{5-2}[/tex] = 434.9 nm

[tex]\lambda_{4-2}[/tex] = 487.1 nm

[tex]\lambda_{3-2}[/tex] = 657.5 nm

The distance that is present between ant two successive crests of a wave, mostly points present between a sound wave or electromagnetic wave. Wavelength is also called as the distance between identical points (adjacent crests) in the adjacent cycles of any waveform signal that is propagated in space or along a wire.

Frequency, which is defined as the quantity of wave cycles per second, and wavelength have an inverse relationship. The wavelength of a signal decreases with increasing frequency.

To know more about wavelength, visit:

https://brainly.com/question/12924624

#SPJ4

A 900 kg car that exerts 5000 n of applied force on a level road while being opposed by 1000 n of friction -the acceleration of the car is 44.4  m/s².

Given that

To find

So, according the question

we have,

     mass of the car m = 900 kg

     applied force by car f = 5000 n

     friction force r = 1000 n

now,

    total net force (F) = applied force (f)- friction force (r)

                              F = 5000 - 1000

                              F = 4000 n

we know that,

                             F = ma

where,

      m = mass of car

       a = acceleration

So, putting the values of m and F,

                          4000 = 900 × a        

                                a  [tex]= \frac{4000}{900}[/tex]

                                a  =  44.4  m/s²

To learn more about acceleration please click on that link

https://brainly.com/question/12550364

#SPJ4

The probability of rolling a one is twice that of rolling any other number.

Then the probability of rolling a 1 is 1/6.

The probability of something is how likely it is to happen. When we don't know how an event will turn out, we can talk about the probabilities of several outcomes—how likely they are. Examining events with a probability component is known as statistics.

Probability is a mathematical concept used to determine the likelihood of an event. It is challenging to make an accurate prediction for many events. We can only predict an event's likelihood, or how probable it is to occur, by using it.

To learn more about probability from the given link:

brainly.com/question/11234923

#SPJ4

Plastic insulation does not necessarily decrease the heat transfer from the wire. Although it is insulated to keep it safe, shock free and protect the wire from high temperature.

Plastic is a poor conductor of heat. The reason is it does not have free electrons in its conduction band which makes it a perfect conductor.

Since Plastic is good insulator, they do not allow the flow of heat through them. When an electric wire is insulated with plastic it does not let the heat reach the electric wire.

If you need to learn more about plastic as insulator, click here

https://brainly.com/question/10982222?referrer=searchResults

#SPJ4

The plastic insulation on the electrical wire will not decrease the heat transfer from the wire.

Plastic insulation cannot always reduce heat transmission from the wire. Despite the fact that it is protected to make it safe, shock-free, and to shield the wire from extreme temperatures.

Plastic is a bad heat conductor. The reason for this is that it has no flow of electrons inside its conduction band, making it an excellent conductor.

Because plastic is a poor insulator, it does not enable heat to pass through it. Whenever an electric wire is protected with plastic, it prevents heat from reaching the wire.

To learn more on plastic insulation: brainly.com/question/650712

#SPj4

The mass flow rate of water is 0.08757 kg/s

mCp (T2 - T1) = Q =w

m x 1.015 (360-315) = 4000

m = 4000/ 1.015 x 10^3 x (360-315)

m = 0.08757 kg/s

The density of water at 68°F / 20°C has a flow rate in our example of about 998 kg/m3. However, as the density of water varies with temperature, salinity, and pressure, use our water density calculator if you want to be extremely accurate. 30.58 lbs/s of mass flow were shown by the gadget.

By dividing the volume flow rate by the fluid’s mass density, one can determine the mass flow rate. The cross-sectional vector area, A, is multiplied by the flow velocity of the mass elements, v, to determine the volume flow rate.

The mass of a substance that moves per unit of time is known as the mass flow rate in physics and engineering.

To know more about mass flow rate visit:

https://brainly.com/question/13348162

#SPJ4

The heat of the surroundings is  - 4482 J.

A calorimeter is a device in which that is no exchange of heat between the device and the environment. In other words, there could only be exchange of heat when the a substance has been put inside the calorimeter.

We know that in a calorimeter;

Heat of the surrounding =  Heat of the system

That implies that they are of the same magnitude but of opposite direction hence the heat of the system is - 4482 J.

Learn more about calorimeter:https://brainly.com/question/4802333

#SPJ1

The effect of friction on air: B. is relevant only within the planetary boundary layer.

In Science, there are different types of force that acts on a physical object and these include the following:

Frictional force can be defined as a type of force that resists and slows the relative motion of two physical objects when there surfaces come in contact. This ultimately implies that, a frictional force prevents two surfaces from easily sliding over or slipping across one another.

Based on scientific research and experiments, we can reasonably infer that the effect of friction on air is relevant and important only within the planetary boundary layer.

Read more on friction and air here: https://brainly.com/question/28134112

#SPJ4

Complete Question:

The effect of friction on air:

A. increases wind speed.

B. is relevant only within the planetary boundary layer.

C. causes airflow to cross isobars rather than run parallel to them.

D. increases the Coriolis force. E. increases with height.

Answer:

Character: Example 2

Plot: Example 3

Theme: Example 1

Explanation:

A character is a person that is apart of a story, the plot is the events and the "flow" of the story, and the theme is a lesson that can be taken in real life from the story.

Answer:

Character- Mickey mouse, a reporter, Katniss, Romeo

Theme- An act of kindness can affect others in unexpected ways

Plot- A boy wakes up in a strange world, leaves his belongings, battles monsters, and then wakes up to relize it was all a bad dream. He appreciation for his family more when his nightmare ends

Explanation:

Answer:

-2

Explanation:

Answer:

Explanation

hey b

In SI, prefixes are used with the names of the base unit to indicate the multiple of 10 that is being used with the base unit

Base units are units used for various measurements such as length, time, mass, temperature etc. For example the SI base unit of length is meter, SI base unit of time is second, SI base unit of mass is gram and SI base unit of temperature is kelvin.

Prefixes such as kilo, mega, giga, deci, centi, milli, micro, nano etc are used with base units mentioned above to indicate multiples and submultiples of 10. The multiples of 10 are used to mention larger measurements and the submultiples of 10 are used to mention smaller measurements. For example, the total unit will be called as millimeter, kilo seconds etc.

Therefore, in SI, prefixes are used with the names of the base unit to indicate the multiple of 10 that is being used with the base unit.

To know more about SI Units

https://brainly.com/question/12750330

#SPJ1

The sequence is E,B,F,C. for the scenarios total internal reflection possible .

What is total internal reflection?

Total internal reflection is an optical phenomena when waves arriving at the interface between two media entirely reflect back into the first medium instead of being refracted into the second. total internal reflection, in physics, is defined as complete reflection of a ray of light within a medium like  as water or glass from the surrounding surface's back into the medium. The phenomenon occurs if the angle of incidence is higher than a certain limiting angle, known as  the critical angle

the answer is added at the bottom-

to learn more about Total internal reflection :

brainly.com/question/13088998

#SPJ4

The calculated speed is 8 m/s.

The region below the curve in the acceleration vs. time graph can be used to calculate velocity. Similar to the integral in equation, this (1). The area underneath the graph in the first four seconds in this example is just a rectangle with a base of t1=2s and a height of a1=4m/s2.

Therefore, the area is v24=a1

t24=4m/s2

2m/s=8m/s.

Since the particle begins at rest and is not accelerated for the first second, its velocity after 4 seconds is

v (4s) =v24

=8 m/s.

The complete question is- Consider the acceleration of a particle along a straight line with an initial position of 0 m and an initial velocity of 0 m/s.

a. What is the velocity at 4 s?

Learn more about velocity here-

https://brainly.com/question/18084516

#SPJ4

The work done on the cylinder against the external pressure is 408.34 J.

The work done on the cylinder against the external pressure is calculated as follows;

W = PΔV

where;

Substitute the given parameters and solve for work done on the cylinder.

W = 13 atm (0.46 L - 0.15 L)

W = 4.03 atm.L

1 atm.L = 101.325 J

4.03 atm.L = ?

= 408.34 J

Thus, the work done on the cylinder against the external pressure is 408.34 J.

Learn more about work done on gas here: https://brainly.com/question/17238696

#SPJ4

The two possible angles to where this water from the the hose travels at are 24.9° (below the horizontal) and 85.2° (above the horizontal)

Equations of motion in physics are the kind of equations that explain how any physical system behaves in terms of how its motion changes over time.

This kind of behavior of a physical system is described in more detail by the equations of motion as a collection of mathematical functions expressed in terms of dynamic variables.

The three equations of motion can be stated as follows:

v = u + at.

v² = u² + 2as.

s = ut + ½at²

So, from this we already have the idea about,

V = U + at

35 = 0 + 80 cosθ t

also,

S = Ut + 1/2a t^2

-20 = -80 sinθt + 1/2 (-32.2)t^2

Thus, we have

20 (cosθ)^2 = 17.5 sin2θ + 3.0816

solving for theta, we have

θ1 = 24.9° (below the horizontal)

θ2 = 85.2° (above the horizontal)

To know more equations of motion, visit:

https://brainly.com/question/14355103

#SPJ4

a. Nyquist rate = 30 kHz is the Nyquist rate.

compact disc (CD) records audio signals digitally by means of a binary code. Assume an audio signal bandwidth of 15 kHz.

⇒ According to the Nyquist criteria, the sampling frequency must be at least 2 times the bandwidth.

⇒Nyquist rate = 2 x 15 kHz

⇒Nyquist rate = 30 kHz

So that means we need to take at least 30,000 sample/s to meet Nyquist criteria.  

To learn more about The Nyquist rate refer to

https://brainly.com/question/25922783

#SPJ4

By orthogonality, vectors tj < Vj, Vi> = 0.

Given,

v₁, v₂, and v₃ are mutually orthogonal vectors in r³.

Let v₁, v₂,...vₓ ∈ V form an orthogonal set if and only if

<Vi, Vj> = { 1 if i = j ; and 0 if i ≠ j}

Now, let v₁, v₂, and v₃ are non-zero vectors that form an orthogonal set.

Suppose t₁v₁ + t₂v₂ + t₃v₃ = 0; for some t₁, t₂, t₃∈ R

Then for any index t ≤ i ≤ 3, we have

< t₁v₁ + t₂v₂ + t₃v₃, Vi> = < 0, Vi> which equals to 0.

t₁<v₁,Vi>  + t₂<v₂,Vi> + t₃<v₃, Vi> = 0

By orthogonality, tj < Vj, Vi> = 0

Or, tj = 0

Where, i = j = < 1, 2, 3>

Hence proved.

To learn more about vectors, visit: https://brainly.com/question/13402428

#SPJ4

The bird should fly at an angle of roughly South 23.58° East if it wants to move directly southward in relation to the earth.

The magnitude of the bird's velocity is 100 km/h, among other components of the velocity.

North-South direction equals the direction of the bird.

Wind velocity is 40 km/h in magnitude.

The wind is blowing in an east to west direction.

The two velocities' component vectors are as follows:

Bird's velocity is v = -100 j.

Wind speed, v = 40 i.

If a bird has a southerly velocity, it will move in that direction.

component of velocity to account for the wind's speed.

Let be the angle of the bird's direction in relation to the

we have a negative x-axis.

In the third quadrat, -100 cos = -40 I 66.42°,

Given that the y and x numbers in the third quadrat are both negative, -100 cos = -40i 66.42°.

Therefore, the angle in the south-west direction is 90 - 66.42 23.58°.

Therefore, to fly directly southward relative to the ground, the bird should fly in the direction of south 23.58° east.

Learn more about direction here-

https://brainly.com/question/13899230

#SPJ4

On a cosmic calendar which compresses the history of the universe into one year, our milky way galaxy probably formed on March 1st.

A cosmic calendar can be defined as a scale on which the history of the universe is compressed into one (1) year. This ultimately implies that, a  cosmic calendar is used by astronomers and scientists alike to compress the history of the universe is compressed into one (1) year.

Based on the information on a cosmic calendar which compresses the history of the universe into one (1) year, we can reasonably infer and logically deduce that our milky way galaxy was probably formed on March 1st.

Read more on cosmic calendar here: https://brainly.com/question/28322103

#SPJ4

b = {- 8, 0, 7, 15}

15 elements of set b are greater than 7.

Mathematics Set Theory Symbols

Symbol Symbol Name Meaning

A ∪ B union                Elements that belong to set A or set B

A ∩ B intersection        Elements that belong to both the sets, A

                                              and B

A ⊆ B subset                subset has few or all elements equal to        

                                              the set

A ⊄ B not subset         left set is not a subset of right set

To learn more about Set Theory refer to

https://brainly.com/question/28369289

#SPJ4

It is advisable to purchase a new circuit breaker with a higher capacity, perhaps a 240V, 80-100A circuit breaker, as breaker trips happen regularly.

We know that power is distributed as

P = IV

P stands for power in watts.

I is the same as current in amps.

And V stands for the voltage difference in potential.

The circuit breaker's function is to handle 240V, 60A.

A current of more over 60A will therefore trip the circuit breaker. The circuit breaker trips OFF when there is a significant amount of electricity flowing through it.

Three 5000W heating elements are now present in the furnace, and each of them trips the circuit breaker. Additionally, this element develops gradually; it does not happen all at once. When turned ON, the first component will draw the following amount of electricity from the mains:

We are aware that the initial heating element has a 3000W power rating.

P = IV

[tex]I' = \frac{P}{V} = \frac{3000}{240}[/tex]

I' =  20.833amps

The circuit breaker is still operational in this scenario because of its 60A capacity.

The second heating element eventually turns on.

Furthermore, this will result in a current of

[tex]I'' = \frac{P}{V} = \frac{3000}{240}[/tex]

I" = 20.833amps

the total current drawn at this time is I = I' + I" = 20.833 + 20.833

I = 41.667 amps

Once more, the 60A capacity of the circuit breaker makes it still appropriate.

Eventually, the third component will trip ON once more, drawing current from:

I"' = [tex]\frac{P}{V} = \frac{3000}{240}[/tex]

I"' = 20.833 amps

The current drawn overall is now I = I' + I" + I"'

I = 20.833+20.833+20.833

I = 62.5 Amps

The breaker will trip because the current exceeds the circuit rating.

Advice: Since replacing the furnace might be too expensive, I will suggest that they purchase a new circuit breaker with a higher capacity, possibly a 240V, 80-100A circuit breaker.

The complete question is : You have been sent to a new home. The homeowner reports that sometimes the electric furnace trips the 240-V, 60-A circuit breaker connected to it. Upon examination, you find that the furnace contains three 5000-W heating elements designed to turn on in stages. For example, when the thermostat calls for heat, the first 5000-W element turns on. After some period of time, the second element will turn on, and then, after another time delay, the third element will turn on. What do you think the problem is, and what would be your recommendation for correcting it? Explain your answer.

Learn more about power here:

The correct answer is 1.5 seconds.

We are aware that the differentiation is used to calculate the rate at which a quantity changes over time. We are aware that the velocity is the name given to the derivative of the displacement. Acceleration is what we get when we differentiate velocity.

x = t^4 - 6t^2 + 9t

To calculate the velocity, take the derivative.

v = 4t^2 - 12t + 9

To acquire acceleration, repeat the derivative.

a = 8t - 12

force:

F = ma

If a = 0, F = 0. As a result, when a = 0, the net force on the locomotive is equal to zero.

a = 0 = 8t -12

8t -12 = 0

8t = 12

t = 12/8 = 1.5 seconds

To learn more about acceleration refer the link:

https://brainly.com/question/20365677

#SPJ4

Answer:

lol the SUN

Explanation:

Answer:

bro SUN just sun giving us heat

d = -1 m

The negative sign indicates that the charge from that force of the space of the two spheres.

When charged matter is exposed to an electromagnetic field, its electric charge—a property of matter—causes it to feel a force. An electric charge can be either positive or negative (commonly carried by protons and electrons respectively). Like and unlike charges are attracted to one another while being repelled by the other. Neutral describes a thing without any net charge. Classical electrodynamics, a term coined to describe early understanding of the interactions of charged particles, is still applicable to issues that do not demand for taking quantum effects into account.

The net charge, or the total of the positive and negative charges, is constant in an isolated system because electric charge is a conserved attribute. Electrical charge is transported by subatomic particles.

To learn more about charge from the given link:

brainly.com/question/9194793

#SPJ4

Answer:

The car moving at velocity 15 m/s will take 2.67 s to travel 40 m.

What do you mean by velocity?

An object's velocity can be defined as the rate of change in the object's position with respect to a frame of reference and time.

A rocket launching into space and a car going north on a busy freeway may both be quantified using velocity.

Explanation:

Velocity of the car = 15 m/s

Distance = 40 m

Therefore, time taken to travel 40 m at a velocity of 15 m/s

= 40/15 = 2.666 ≈ 2.67 s

To know more about velocity, click on the link

https://brainly.com/question/1856219

#SPJ9

The mass of gold with the dimensions 10 cm, 5 cm, & 20 cm will be  19.3 kg.

What is volume ?

The amount of cubic space a three-dimensional object takes up (measured in inches, quarts, or centimeters): square footage. The volume that a certain amount of a substance fills.

Although the dimensions were given in centimeters, you require the volume in cubic meters.

The dimensions must also be given in meters because the units must match. The conversion is to multiply the centimeters by 100 to obtain the volume in cubic meters.

0.10 x 0.05 x 0.20 = 0.001 m^3

To determine the mass of the gold block, multiply by the density.

0.001 x 19,300 = 19.3 kg

To learn more about density  click on the link below:

https://brainly.com/question/17780219

#SPJ4

Question:

The density of gold is 19300 m^3/kg. What will be the mass of gold with the dimensions 10 cm, 5 cm, & 20 cm?

A. Acceleration during launch = 4000 m/s²

B. Distance that the froghopper moves while its legs are pushing = 0.002 m

Kinematics is sometimes regarded as a subfield of mathematics and is sometimes referred to as the geometry of motion. But in physics, it serves as the basis for classical mechanics. Without considering the forces that propel an item, kinematics studies how an object moves. It gives a description of the spatial positions of bodies or systems of material particles as well as the velocities and rates of change of those velocities.

t = 0.001 s

u = 4 m/s

PART A :

a = Δv / t

a = [tex]\frac{4m/s}{0.001s}[/tex]

a = 4000 m/s²

Therefore, Acceleration during launch = 4000 m/s²

PART B :

S = ut +  [tex]\frac{1}{2}[/tex]at²

S = 0(0.001s) + [tex]\frac{1}{2}[/tex]  x 4000 m/s² (0.001)²

S = 0.002 m

Therefore, the Distance that the froghopper moves while its legs are pushing = 0.002 m

To know more about Acceleration and kinematics, refer to this link :

brainly.com/question/13479383

#SPJ4

Answer:

Shaking hands with the opponent at the end of the game.

Explanation:

Hope this helps.

As the planets orbit the sun, they are never far from the ecliptic on the celestial sphere.

Which planets are never seen to some distance from the sun?

As regarded from the Earth, two of the planets (Mercury and Venus) are in no way a long way from the sun. Venus can get approximately forty eight tiers from the solar, while Mercury can simplest control a 27.5 levels separation from the solar

Why does the orbit of Mars never takes it far from the ecliptic?

this is due to the fact the trails of each worlds are tilted a piece. Mars's orbit is tilted by about two ranges. that means it is able to wander two levels away from the ecliptic.

Learn more about ecliptic https://brainly.com/question/3473428

#SPJ4