Write an equation of the circle with center (7,9) and diameter 12

The correct answer is option (c) 131.29. To find the sample mean, we need to calculate the average of the given cholesterol levels. The sample mean is computed by summing up all the values and dividing by the total number of values.

In this case, the cholesterol levels of the 7 patients are given as follows: 128, 127, 153, 144, 132, 120, 115.

To find the sample mean:

Sample mean = (Sum of all values) / (Total number of values)

Sum of all values = 128 + 127 + 153 + 144 + 132 + 120 + 115 = 919

Total number of values = 7

Sample mean = 919 / 7 = 131.29

Therefore, the sample mean of the given cholesterol levels is 131.29.

Hence, the correct answer is option (c) 131.29.

Learn more about sample mean here:

brainly.com/question/17514579

#SPJ11

The answer closest to the margin of error is option b: 4.2%.

To determine the margin of error at the 95% confidence level for the proportion of likely voters who prefer the incumbent candidate, we can use the formula:

Margin of Error = (Z * √(p*(1-p))/√n)

Where:

Z is the Z-score corresponding to the desired confidence level (95% corresponds to approximately 1.96)

p is the proportion of voters who prefer the incumbent candidate (42% or 0.42)

n is the sample size (350)

Calculating the margin of error:

Margin of Error = (1.96 * √(0.42*(1-0.42))/√350)

Using a calculator, the closest value to the margin of error is approximately 4.2%. Therefore, the answer closest to the margin of error is option b: 4.2%.

To know more about margin of error refer here:

https://brainly.com/question/29419047

#SPJ11

c) You travel about 50 miles per hour.

d) You were 15 miles from home when you started.

e) After 7 hours, you will be 365 miles away from home.

The slope-intercept representation of a linear function is given by the equation shown as follows:

y = mx + b

The coefficients m and b have the meaning presented as follows:

When x = 0, y = 15, hence the intercept b is given as follows:

b = 15.

In six hours, the distance increased by 300 miles, hence the slope m is given as follows:

m = 300/6 = 50.

Hence the equation is:

y = 50x + 15.

After seven hours, the predicted distance is given as follows:

y = 50(7) + 15 = 365 miles.

The points on the line are:

(0,15) and (6, 315).

More can be learned about linear functions at https://brainly.com/question/15602982

#SPJ1

To find the absolute value of an equation, you set up two separate equations representing the positive and negative cases, solve each equation, and check the solutions by substituting them back into the original equation.

Finding the absolute value of an equation involves determining the magnitude or distance of a number or expression from zero on the number line. The absolute value function is denoted by the symbol "|" surrounding the number or expression. The absolute value function always returns a positive value or zero, regardless of the sign of the number or expression inside it. Here's how you can find the absolute value of an equation:

Identify the number or expression inside the absolute value notation.

For example, consider the equation |x - 5| = 3.

Set up two separate equations.

The first equation represents the positive case:

x - 5 = 3

The second equation represents the negative case:

-(x - 5) = 3

Solve each equation separately.

Solve the first equation:

x - 5 = 3

x = 3 + 5

x = 8

Solve the second equation:

-(x - 5) = 3

-x + 5 = 3

-x = 3 - 5

-x = -2

x = 2 (multiply both sides by -1 to remove the negative sign)

Check the solutions.

Substitute the found values of x back into the original equation to ensure they satisfy the absolute value condition.

For |x - 5| = 3:

When x = 8: |8 - 5| = 3 (True)

When x = 2: |2 - 5| = |-3| = 3 (True)

State the solutions.

The solutions to the equation |x - 5| = 3 are x = 8 and x = 2.

In summary, to find the absolute value of an equation, you set up two separate equations representing the positive and negative cases, solve each equation, and check the solutions by substituting them back into the original equation.

For more such questions on absolute value, click on:

https://brainly.com/question/24368848

#SPJ8

The equation for the line t is:

f(x) = -3x + 3

Let's say that line t can be written as:

f(x) = a*x + b

Remember that two lines are perpendicular if the product between the slopes is -1, then if our line is perpendicular to:

y = 1/3x - 5

Then we will have:

a*(1/3) = -1

a = -3

The line is:

f(x) = -3*x + b

And this line must pass through (-2, 9), then:

9 = -3*-2 + b

9 = 6 + b

9 - 6 = b

3 = b

The line t is:

f(x) = -3x + 3

Learn more about linear equations at:

https://brainly.com/question/1884491

#SPJ1

The correct statements about eigenvalues and their algebraic multiplicity are as follows:

- The characteristic polynomial of a 3x3 matrix is always a cubic (degree 3) polynomial.

- If A - I is a matrix of full rank, then 1 (not i) must be an eigenvalue for A.

- If A is a 3x3 matrix of rank 2, then A must have at most 2 eigenvalues.

- Any 7x7 matrix must have at least one real eigenvalue.

Explanation:

1. The characteristic polynomial of a matrix is obtained by subtracting the identity matrix from the given matrix and taking the determinant. Since a 3x3 matrix has three eigenvalues, the characteristic polynomial will be a cubic polynomial.

2. If A - I, where I is the identity matrix, has full rank, it means that the matrix A does not have 1 as an eigenvalue. This is because if 1 were an eigenvalue, then A - I would have a non-trivial nullspace, resulting in the matrix not having full rank.

3. The rank of a matrix represents the number of linearly independent columns or rows. If a 3x3 matrix has rank 2, it means that there are two linearly independent columns or rows, which implies that there are at most two eigenvalues.

4. The statement that any 7x7 matrix must have at least one real eigenvalue is true. This is based on the fact that the characteristic polynomial of a real matrix always has real coefficients, and complex eigenvalues must occur in conjugate pairs.

5. If the graph of the characteristic polynomial does not cross the x-axis, it means that the polynomial does not have any real roots. Therefore, the matrix does not have any real eigenvalues.

Hence, the correct statements about eigenvalues and their algebraic multiplicity have been explained.

To learn more about eigenvalues : brainly.com/question/29861415

#SPJ11

According to the statement the correct answer is option C - yes, the data are distributed evenly around the line of fit.

To determine if a model is a good fit for a data set, one needs to evaluate how closely the data points align with the line of fit. The line of fit represents the best possible straight line that can be drawn through the data points. If the data points are too far from the line of fit or too close to the line of fit, then it is an indication that the model is not a good fit for the data.
Option A states that the data points are too far from the line of fit, indicating that the model is not a good fit for the data. Option B states that the data points are too close to the line of fit, which is not necessarily a good or bad thing as it depends on the level of accuracy required for the analysis. Option C states that the data points are evenly distributed around the line of fit, which indicates that the model is a good fit for the data. Lastly, option D states that the line of fit touches at least one point in the data set, which is not sufficient to determine if the model is a good fit for the entire data set.
Therefore, the correct answer is option C - yes, the data are distributed evenly around the line of fit.

To know more about data set visit :

https://brainly.com/question/28479961

#SPJ11

The solution for this question is (e) unknown is not the estimated difference in means.

6. The difference in the population means is estimated to be between -2.0 and 8.0 with a 95% confidence interval. The midpoint of this interval gives us the estimate of the difference in means.

Midpoint = (Upper bound + Lower bound) / 2

Midpoint = (8.0 + (-2.0)) / 2

Midpoint = 6.0 / 2

Midpoint = 3.0

Therefore, the estimated difference in the population means is 3.0.

(a) 0 is not the estimated difference in means.

(b) 5 is not the estimated difference in means.

(c) 7 is not the estimated difference in means.

(d) 8 is not the estimated difference in means.

(e) unknown is not the estimated difference in means.

The correct answer is (e) unknown.

8. The question about the comparison of two population means is incomplete. Please provide the complete question, and I'll be happy to help you with it.

To know more about Population related question visit:

https://brainly.com/question/15889243

#SPJ11

The domain of the given function is [6, ∞) in interval notation. The above domain of f(x) ensures that the expression inside the square root is non-negative.

The given function is f(x) = √4x - 24. The domain of a function is the set of all possible values of x for which the function is defined and gives real outputs.

Since f(x) is a square root function, its argument must be greater than or equal to 0.

Thus,4x - 24 ≥ 0 ⇒ 4x ≥ 24 ⇒ x ≥ 6 .

Hence, the domain of the given function is [6, ∞) in interval notation.

The above domain of f(x) ensures that the expression inside the square root is non-negative.

To know more about Function  visit :

https://brainly.com/question/30721594

#SPJ11

The volume of cone is more than the cylinder this implies the cone holds 43.96 in³ more ice cream than the cup.

Radius of the cone 'w'  = 4 in

Height of the cone 'x' = 6 in

To determine which container will hold the most ice cream,

Calculate the volumes of the cone and the cup.

The volume of a cone is given by the formula

Volume of cone = (1/3) × π × r² × h,

where r is the radius and h is the height.

Substituting the values into the formula, we have,

⇒ Volume of cone = (1/3) × 3.14 × (4²) × 6

⇒ Volume of cone = (1/3) × 3.14 × 16 × 6

⇒ Volume of cone = 100.48 in³

The volume of a cylinder is given by the formula ,

Volume of cylinder = π × r² × h,

where r is the radius and h is the height.

Diameter of the cylinder 'y' = 6 in

Height of the cylinder  'z' = 2 in

First, find the radius of the cylinder by dividing the diameter by 2,

radius of the cylinder

= y/2

= 6/2

= 3 in

Substituting the values into the formula, we have,

⇒ Volume of cylinder = 3.14 × (3²) × 2

⇒ Volume of cylinder = 3.14 × 9 × 2

⇒ Volume of cylinder = 56.52 in³

Comparing the volumes of the cone and the cylinder,

we find that the cup cone holds 43.96 in³ more ice cream than the cup.

Therefore, the cone holds 43.96 in³ more ice cream than the cup as volume of cone is greater than volume of cylinder .

Learn more about volume here

brainly.com/question/31184652

#SPJ4

Answer: Divide by [tex]\pi[/tex], then divide it by 2

Step-by-step explanation:

Circumference formula: [tex]\pi[/tex]*(r*2)

[tex]\pi[/tex]*(r*2)/[tex]\pi[/tex]=r*2

(r*2)/2=r

So, divide by exactly pi (or 3.14), then divide by 2. DON'T divide by 2 first, then pi because you won't end up with the same answer.

We need to find the sum of all numbers that are congruent to 1 (modulo 3) from 1 to 100. We can solve this problem by using an arithmetic series formula.

The formula to find the sum of the first n terms of an arithmetic series is Sn = n/2(a1 + an), where a1 is the first term, an is the nth term, and n is the number of terms. In this problem, the common difference between each term is 3, since we are looking at numbers congruent to 1 (modulo 3). Therefore, we can write the nth term as 3n - 2. To find the number of terms, we can divide 100 by 3 and round up to the nearest whole number, since we want to include the last term.

This gives us n = 34. Therefore, we can plug in these values to the formula to get: Sn = 34/2(1 + 99) = 34/2(100) = 1700. So the sum of all numbers that are congruent to 1 (modulo 3) from 1 to 100 is 1700.

To know more about congruent visit:

brainly.com/question/30596171

#SPJ11

(A) The function f(x) = -6x² + 15x when x = 3, f(x) = -9

(B) The solution to the equation fx + 4x + 2 = 2 is x = 0.

To evaluate the function f(x) = -6x² + 15x, we need to substitute the given values of x into the function and simplify the expression.

Let's evaluate f(x) at x = 3:

f(3) = -6(3)² + 15(3)

= -6(9) + 45

= -54 + 45

= -9

Therefore, when x = 3, f(x) = -9.

To solve the equation fx + 4x + 2 = 2, we need to isolate the variable x.

fx + 4x + 2 = 2

First, let's simplify the equation:

fx + 4x = 0

Combine like terms:

5x = 0

Divide both sides by 5:

x = 0

Therefore, the solution to the equation fx + 4x + 2 = 2 is x = 0.

To know more about function click here :

https://brainly.com/question/26582052

#SPJ4

The curve given by r = sin(10) is a polar curve with one loop.

To find the area enclosed by one loop of the curve, we can use the formula for the area of a polar region, which is given by:

A = (1/2)∫θ2θ1 [r(θ)]^2 dθ

Since the curve has one loop, we need to find the values of θ that correspond to one complete revolution around the origin. Since sin(θ) has period 2π, we have:

r = sin(10) = sin(10 + 2π) for all values of θ

So, one complete revolution occurs when θ increases from 0 to 2π. Thus, the area enclosed by one loop of the curve is:

A = (1/2)∫02π [sin(10)]^2 dθ

Using the identity sin^2(θ) = (1/2)(1 - cos(2θ)), we can simplify this integral to:

A = (1/2)∫02π (1/2)(1 - cos(20θ)) dθ

Simplifying further, we get:

A = (1/4)∫02π (1 - cos(20θ)) dθ

Evaluating this integral gives:

A = (1/4) [θ - (1/20)sin(20θ)]02π

A = (1/4) (2π)

A = π/2

Therefore, the area enclosed by one loop of the curve r = sin(10) is π/2 square units.

To learn more about polar curve click here: brainly.com/question/26193139

#SPJ11

The counterexample that disproves the inequality n³ ≤ 3n² is n = 4.

To disprove the statement n³ ≤ 3n², we need to find a counterexample, which is a value of n for which the inequality is false.

Let's evaluate the inequality for the given options:

a. n = 0:

0³ ≤ 3(0)²

0 ≤ 0

The inequality holds for n = 0.

b. n = -1:

(-1)³ ≤ 3(-1)²

-1 ≤ 3

The inequality holds for n = -1.

c. n = 0.5:

(0.5)³ ≤ 3(0.5)²

0.125 ≤ 0.75

The inequality holds for n = 0.5.

d. n = 4:

4³ ≤ 3(4)²

64 ≤ 48

The inequality does not hold for n = 4.

Therefore, the counterexample that disproves the inequality n³ ≤ 3n² is n = 4.

Learn more about Inequality here:

https://brainly.com/question/20383699

#SPJ1

The probability that it landed on a multiple of four that is no greater than 10 is 0.3333.

If we know that the die landed on a number strictly greater than 10 only if it landed on a multiple of four, it means that if the dice landed on a number less than or equal to 10, it cannot be a multiple of four.

There are three multiples of four that are less than or equal to 10: 4, 8, and 12 (which we exclude since it's greater than 10).

Out of these three possibilities, only one satisfies the condition that the die landed on a number strictly greater than 10 only if it landed on a multiple of four, which is 8.

Therefore, the probability that the die landed on a multiple of four that is no greater than 10 is 1 out of 3, or 1/3.

In other words, the probability is approximately 0.3333.

Learn more about probability at https://brainly.com/question/13143685

#SPJ11

the Taylor polynomial T2 centered at x = 0 is 23x - (23/2)x^2, and the Taylor polynomial T3 centered at x = 0 is 23x - (23/2)x^2 + (23/3)x^3.

To find the Taylor polynomials T2 and T3 centered at x = a for the function f(x) = 23ln(x+1), where a = 0, we need to calculate the function's derivatives at x = a and evaluate them at a.

First, let's find the derivatives:

f(x) = 23ln(x+1)

f'(x) = 23 * 1/(x+1) * (d/dx)(x+1) = 23/(x+1)

f''(x) = (d/dx)(23/(x+1)) = -23/(x+1)^2

f'''(x) = (d/dx)(-23/(x+1)^2) = 46/(x+1)^3

Now, let's evaluate the derivatives at x = a = 0:

f(0) = 23ln(0+1) = 23ln(1) = 23 * 0 = 0

f'(0) = 23/(0+1) = 23/1 = 23

f''(0) = -23/(0+1)^2 = -23/1 = -23

f'''(0) = 46/(0+1)^3 = 46/1 = 46

Now we can construct the Taylor polynomials:

T2(x) = f(0) + f'(0)(x-a) + (f''(0)/2!)(x-a)^2

= 0 + 23(x-0) + (-23/2)(x-0)^2

= 23x - (23/2)x^2

T3(x) = T2(x) + (f'''(0)/3!)(x-a)^3

= 23x - (23/2)x^2 + (46/6)(x-0)^3

= 23x - (23/2)x^2 + (23/3)x^3

Therefore, the Taylor polynomial T2 centered at x = 0 is 23x - (23/2)x^2, and the Taylor polynomial T3 centered at x = 0 is 23x - (23/2)x^2 + (23/3)x^3.

Learn more about polynomial here:

https://brainly.com/question/11536910

#SPJ11

the distance between x = 1 and y = √2 is √3.

To find the distance between two points (x1, y1) and (x2, y2) in a two-dimensional coordinate system, we can use the distance formula:

Distance = sqrt((x2 - x1)^2 + (y2 - y1)^2)

In this case, we want to find the distance between x = 1 and y = √2.

Let's consider the points (1, 0) and (0, √2) as the coordinates (x1, y1) and (x2, y2), respectively.

Using the distance formula:

Distance = sqrt((0 - 1)^2 + (√2 - 0)^2)

= sqrt((-1)^2 + (√2)^2)

= sqrt(1 + 2)

= sqrt(3)

To know more about coordinate visit:

brainly.com/question/22261383

#SPJ11

The terms of the series do not approach zero, and the series diverges.

To test for convergence or divergence of the given series, let's analyze the terms of the series and check for any patterns.

The given series is:

[tex]\dfrac{2n \times n!} { (1.3.5...(2n -1) . (2n + 1))}[/tex], with n starting from 1.

Let's simplify the terms:

[tex]2n \times n! = 2n \times n \times (n-1) \times (n-2) \times ... \times 3 \times 2 \times 1\\(1.3.5...(2n - 1) . (2n + 1)) = (2n + 1) \times (2n - 1) \times (2n - 3) \times ... \times 5 \times 3 \times 1[/tex]

Now, we can rewrite the given series as:

[tex]\dfrac{(2n \times n!)}{((2n + 1) \times (2n - 1) \times (2n - 3) \times ... \times 5 \times 3 \times 1)}[/tex]

Notice that each term in the numerator is twice the previous term, while each term in the denominator alternates between odd and even numbers. We can observe that the numerator grows much faster than the denominator.

As n approaches infinity, the numerator grows exponentially, while the denominator grows at a slower rate. Therefore, the terms of the series do not approach zero, and the series diverges.

In conclusion, the given series diverges.

To know more about the function follow

https://brainly.com/question/31585447

#SPJ4

Answer:

False

explain:

The statement "The best line is the Least Squares Line because it has the largest sum of squares error (SSE)" is false.In fact, the Least Squares Line is chosen to minimize the sum of squared errors (SSE), which is the sum of the squared differences between the predicted values and the actual values of the response variable. This line is obtained by finding the line that minimizes the sum of the squared residuals, which is also known as the sum of squared errors or SSE.The SSE represents the amount of variability in the response variable that is not explained by the regression model. Therefore, the goal of regression analysis is to find the line that minimizes this variability, and the least squares line is the line that achieves this goal.Therefore, the statement that the best line is the Least Squares Line because it has the largest sum of squares error (SSE) is false. In fact, the Least Squares Line is the line that minimizes the SSE, and it is considered to be the best line for fitting a linear regression model to a set of data points.

The side length of the square are as follows:

Square C = √26

Square B = 4.2

Square A = √11

A square is a quadrilateral with 4 sides equal to each other. The opposite sides of a square is parallel to each other.

Therefore, the sides of square can be found as follows:

Square A is smaller than square B.

Square B is smaller than square C.

Therefore, the square sides are √26, 4.2 and √11.

Therefore,

Square C = √26

Square B = 4.2

Square A = √11

learn more on square here: https://brainly.com/question/29253009

#SPJ1

The center of the circle is (−2, 5.5) and the radius is 8.131.

   To find the center of the circle, need to find the midpoint of the line segment connecting the endpoints of the diameter.

   The x-coordinate of the midpoint can be found by taking the average of the x-coordinates of the endpoints: (−10 + 6)/2 = −2.

   Similarly, the y-coordinate of the midpoint can be found by taking the average of the y-coordinates of the endpoints: (1 + 10)/2 = 5.5.

   Therefore, the center of the circle is (−2, 5.5).

   The radius of the circle is half the length of the diameter. It can calculate the length of the diameter using the distance formula.

   The distance formula is given by: √[(x2 - x1)² + (y2 - y1)²].

   Substituting the values of the endpoints, the length of the diameter is: √[(-10 - 6)² + (1 - 10)²] = √[256 + 81] = √337.

   Therefore, the radius of the circle is half of √337, which is approximately 8.131 when rounded to three decimal places.

To learn more about midpoint- brainly.com/question/15209124

#SPJ11

A positively skewed distribution means that the majority of the data is clustered toward the lower end of the range, with a long tail to the right indicating a smaller number of extreme values on the higher end. In the case of the distribution of leaves falling from trees in November, this suggests that most trees lose a similar number of leaves, but there are some trees that lose a very large number of leaves, resulting in a long tail to the right of the distribution.

For any value of h that is not equal to 3, the matrix represents the augmented matrix of a consistent linear system.

To determine the value(s) of h such that the matrix represents the augmented matrix of a consistent linear system, we need to check if the matrix can be row reduced to the form [A | B] where A is a non-singular matrix (has full rank) and B is a column vector.

Let's perform row reduction on the given matrix:

[1  h   5]

[4  12  15]

Row 2 minus 4 times Row 1:

[1   h    5]

[0   12-4h  -5]

We need to ensure that the second row is not all zeros, which would make the system inconsistent.

Therefore, we set 12-4h ≠ 0.

Solving for h:

12 - 4h ≠ 0

-4h ≠ -12

h ≠ 3

Thus, for any value of h that is not equal to 3, the matrix represents the augmented matrix of a consistent linear system.

Learn more about matrices click;

https://brainly.com/question/30646566

#SPJ4

The scale factor is found dividing one side length of the right triangle on the right by the equivalent side length on the right triangle on the left.

We have,

A dilation happens when the coordinates of the vertices of an image are multiplied by the scale factor, changing the side lengths of a figure.

For this problem, we have that the original and the dilated figures are given as follows:

Original: right triangle on the left.

Dilated: right triangle on the right.

Hence the scale factor is found dividing one side length of the right triangle on the right by the equivalent side length on the right triangle on the left.

More can be learned about dilation at

brainly.com/question/3457976

#SPJ1

complete question:

The problem is incomplete,

The right triangle on the right is a scaled copy of the right triangle on the left. Identify the scale factor. Express your answer as a fraction in simplest form.

hence the general procedure to obtain the scale factor was presented.

The probability of A or B or C occurring is 0.54.

To find P(A or B or C), we need to use the principle of inclusion-exclusion.

P(A or B or C) = P(A) + P(B) + P(C) - P(A and B) - P(A and C) - P(B and C) + P(A and B and C)

Substituting the given probabilities:

P(A or B or C) = 0.35 + 0.23 + 0.18 - 0.13 - 0.03 - 0.07 + 0.01

P(A or B or C) = 0.54

Therefore, the probability of A or B or C occurring is 0.54.

To know more about probability refer here:

https://brainly.com/question/32117953

#SPJ11

In summary, the quadratic function f whose graph matches the points (-7,0) and (-3,4) is:
f(x) = -0.5x^2 + 2.5x + 14

To find the quadratic function f whose graph matches the given points (-7,0) and (-3,4), we can start by using the standard form of a quadratic equation, y = ax^2 + bx + c.
We can use the two given points to form a system of equations:
0 = a(-7)^2 + b(-7) + c
4 = a(-3)^2 + b(-3) + c
Simplifying these equations, we get:
49a - 7b + c = 0
9a - 3b + c = 4
We can then solve for one of the variables, such as c:
c = -49a + 7b
c = -9a + 3b - 4
Setting these two equations equal to each other, we get:
-49a + 7b = -9a + 3b - 4
Simplifying, we get:
40a = 4b - 4
10a = b - 1
We can substitute this value of b into one of our original equations, such as:
0 = a(-7)^2 + b(-7) + c
0 = 49a - 7(10a + 1) + c
0 = 29a - 7 + c
c = 7 - 29a
So now we have the values of a, b, and c, and we can write the equation for f:
f(x) = ax^2 + bx + c
f(x) = a(x^2) + (b - 1)x + (7 - 29a)

To know more about quadratic visit:

https://brainly.com/question/22364785

#SPJ11

Option B  Hθ:ն≥1007.24;HAն≤1007.24  represents the null hypothesis (H₀) stating that the average expenditure is equal to or greater than $1,007.24, and the alternative hypothesis (Hₐ) stating that the average expenditure is less than $1,007.24.

The null hypothesis (H₀) and alternative hypothesis (Hₐ) for the given scenario can be determined as follows:

Null Hypothesis (H₀): The average shopper will spend an amount equal to or greater than $1,007.24 during the holiday shopping season.

Alternative Hypothesis (Hₐ): The average shopper will spend an amount less than $1,007.24 during the holiday shopping season.

Based on the given options, the correct choice is:

b. Hθ:ն≥1007.24;HAն≤1007.24

To know more about hypothesis,

https://brainly.com/question/25804900

#SPJ11

If x and y are independent, then the covariance between x and y, cov(x, y), is equal to 0.

Covariance measures the linear relationship between two random variables. If x and y are independent, it means that the occurrence of one variable does not affect the occurrence of the other. In other words, there is no linear relationship between x and y.

The computational formula for covariance is given by:

cov(x, y) = E[(x - E[x])(y - E[y])],

where E[x] and E[y] are the expected values of x and y, respectively.

If x and y are independent, it implies that E[x] and E[y] are also independent, and therefore the term (x - E[x])(y - E[y]) will equal 0 for all possible values of x and y. Consequently, the expected value of this term will also be 0.    

Since cov(x, y) is defined as the expected value of (x - E[x])(y - E[y]), and this term is 0, it follows that cov(x, y) must be equal to 0.

Hence, if x and y are independent, their covariance cov(x, y) is always 0, indicating that there is no linear relationship between the variables.

Visit here to learn more about covariance:

brainly.com/question/28135424

#SPJ11

A 2×2 matrix with non zero entries that has no inverse is:
[1 2]
[2 4]

To find the inverse of a matrix, we need to calculate its determinant. The determinant of this matrix is 0 because the second row is a multiple of the first row. Therefore, this matrix does not have an inverse.

Another way to explain why this matrix has no inverse is to use the formula for the inverse of a 2×2 matrix. If A is a 2×2 matrix with non zero entries, its inverse is given by:
A^-1 = 1/det(A) × [d -b]
                         [-c a]
where det(A) is the determinant of A, and a, b, c, and d are the entries of A.
For the matrix [1 2] [2 4], we have det(A) = 1×4 - 2×2 = 0. Therefore, the formula for the inverse is not defined, and this matrix has no inverse.
In general, a matrix with determinant 0 is called singular, and it does not have an inverse. Such matrices can arise in many contexts, including linear systems of equations, transformations in geometry, and quantum mechanics. It is important to identify singular matrices and handle them appropriately, as they can lead to numerical instability and incorrect results.

To know more about matrix  visit :-

https://brainly.com/question/29132693

#SPJ11