The advantages of Dams and Perennial Canals are Offer an adequate supply of water over drinking and irrigation purposes., Generate power through the production of hydropower. (For more detail scroll down)
What is a perennial canal?The term "perennial canal" refers to a waterway that flows all year long. They draw water from either perennial rivers or from constructed reservoirs which maintain a high water level in the upstream side. Such waterways are not useful during the dry months.
3)Provide flood control and prevent soil erosion.
4)Can provide recreational opportunities such as fishing and boating.
Disadvantages:
1)Displace people and damage ecosystems in the surrounding areas.
2)Can lead to water scarcity and drought downstream due to reduced water flow.
3)Can cause soil salinization due to waterlogging in the irrigated areas.
4)High initial construction costs and maintenance expenses.
→Tube Wells
Advantages:
1)Provide access to groundwater for irrigation and drinking purposes in areas where surface water is scarce.
2)Relatively low initial investment and maintenance costs compared to other water supply systems.
3)Can be installed on a small scale and operated by individual farmers, increasing agricultural productivity and income.
4)Groundwater extraction can be controlled and regulated to prevent over-exploitation.
Disadvantages:
1)Groundwater depletion and reduced water table levels, leading to increased energy consumption and well failure.
2)Increased salinity and groundwater contamination due to overuse and poor waste disposal practices.
3)Limited to areas with high water tables and suitable aquifers.
4)Over-dependence on tube wells can lead to the neglect of other water sources and management practices.
→Tankers
Advantages:
1)Provide a temporary water supply during emergencies such as droughts, natural disasters, and water supply disruptions.
2)Can deliver water to areas that are not connected to a piped water supply network.
3)Provide income and employment opportunities for tanker operators and drivers.
4)Can be used for water storage and transport in rural areas with poor infrastructure.
Disadvantages:
1)High cost and limited availability during times of high demand.
2)Low water quality and increased risk of water-borne diseases due to poor storage and transportation practices.
3)Can cause traffic congestion and air pollution due to the use of large vehicles.
4)Can perpetuate inequalities and discrimination in access to water, as the cost of tankers may be too high for low-income households.
To know more about perennial canal visit :
https://brainly.com/question/22666065
#SPJ1
Which of the following supports the claim that climate change has increased due to human activities? (Select all that apply.)
A.
Increase in glacier formation
B.
Increase in ocean temperature
C.
Decrease in ocean surface acidification
D.
Increase in ocean surface acidification
Answer:
B. Increase in ocean temperature
D.Increase in ocean surface acidification
Explanation:
B. Increase in ocean temperature
D.Increase in ocean surface acidification
B and D support the claim that climate change has increased due to human activities. The increase in ocean temperature is an indicator of climate change, as higher temperatures can lead to more extreme weather events, such as floods, droughts, and hurricanes.
Additionally, the increase in ocean surface acidification is a result of the increased levels of carbon dioxide in the atmosphere, which is a direct result of human activities such as burning fossil fuels.
Classify \triangle{RST}△RSTtriangle, R, S, T by its side lengths and by its angles.
A triangle RST with side lengths of 8 meters, 8 meters, and 8 meters. There are 3 acute angles.
By its side lengths, triangle RST is classified as an equilateral triangle because all three sides have the same length.
By its angles, triangle RST is classified as an acute triangle because all three angles are acute angles (less than 90 degrees).
What is the difference between and Acute and an Equilateral Triangle?An acute triangle is a triangle where all three angles are acute angles, meaning they measure less than 90 degrees. This type of triangle can have varying side lengths and angles.
On the other hand, an equilateral triangle is a triangle where all three sides have the same length, and therefore, all three angles are also equal, each measuring 60 degrees. Equilateral triangles are a specific type of acute triangle, as all their angles are acute, but not all acute triangles are equilateral, as they may have different side lengths.
Learn more about Triangles;
https://brainly.com/question/29083884
#SPJ1
which of the following statements about earthquakes is true? question 24 options: earthquakes can be caused by normal, reverse and strike-slip faulting most earthquakes occur in areas in the middle of a tectonic plate s-waves travel faster than p-waves the time and location of most earthquakes can be predicted several days in advance all of the above are false
One of the following statements about earthquakes is true: earthquakes can be caused by normal, reverse, and strike-slip faulting.
What is an earthquake?
An earthquake is a sudden tremor or movement of the earth's crust that is caused by the sudden release of energy stored in rocks. This seismic activity is caused by the sudden release of energy from rocks under extreme pressure or tension.
What causes an earthquake?
The Earth's surface is made up of moving plates that collide and slip past each other. When the rocks break or move under pressure, a sudden release of energy occurs, causing an earthquake.
Earthquakes are caused by three types of faults: normal, reverse, and strike-slip faulting, according to geologists. They are differentiated by the direction of motion of the rocks on either side of the fault plane.
What is the location of the majority of earthquakes?
Most earthquakes occur in areas along the edge of the Pacific Ocean, including Japan, the Aleutian Islands, Alaska, and the western coast of South and Central America, known as the "Ring of Fire." There are, however, other areas of seismic activity, such as the Mid-Atlantic Ridge, where plates are slowly moving apart.
Why is predicting earthquakes difficult?
Unfortunately, scientists are unable to predict the timing and location of most earthquakes with any degree of certainty. Even though the technology exists to detect seismic activity, predicting when and where it will occur is difficult.
Therefore, none of the alternatives is correct except the first option. Earthquakes can be caused by normal, reverse, and strike-slip faulting.
To learn more about earthquakes, refer below:
https://brainly.com/question/30322293
#SPJ11
While considering the limitations of outside countries and agencies to help in Africa, what initiatives might be successful?
Which of the following statements best explains how satellite imagery would most likely be used in the field of agriculture?
Select one answer
A. Farmers in developed countries have increasingly used remote sensing to determine crop production estimates.
B. Multinational agribusiness firms use satellite photos to monitor the location of laborers on commercial
plantations.
C. The United States Department of Agriculture uses satellite technologies to determine the precise locations of
dairy farms throughout the country.
D. Satellite images are commonly used to calculate the physiological and agricultural densities within countries.
E. Organic farmers in developed countries frequently use satellite images to monitor the effects of chemical
fertilizers on their crop yields.
Answer:
E
Explanation:
because nowadays we find effects of chemical fertilizers on crop using satellite of which i think it is useful
Satellite imagery is commonly used in agriculture to determine crop production estimates. With remote sensing technologies, farmers can get a comprehensive picture of their farms and accurately estimate crop yields.
Among the provided options, the statement that best explains how satellite imagery could most likely be used in the field of agriculture is 'Farmers in developed countries have increasingly used remote sensing to determine crop production estimates.' (Option A)
Through remote sensing technologies, farmers can accurately estimate their crop yields before harvest time. High-resolution images can give them a comprehensive picture of their farm from above, identifying which areas are thriving and which are in need of attention, tracking changes over time or even predicting future changes based on current trends.
Learn more about Use of Satellite Imagery in Agriculture here:https://brainly.com/question/17489477
#SPJ11
How does this model help to explain seasons on Earth?
Answer:
Explanation:
Point Number 2 below the model can be said to be closer to the accurate answer.
The Earth's axis is tilted at an angle of about 23.5 degrees relative to its orbit around the sun. This means that at different points in its orbit, different parts of the Earth are tilted more towards or away from the sun. When the northern hemisphere of the earth is tilted towards the sun, it causes warmer temperatures on earth, resulting in the summer season. Similarly, when the southern hemisphere is tilted more towards the sun, the northern hemisphere experiences winter while the southern hemisphere experiences summer. When the earth is at a point where neither of the hemispheres is titled away from or towards the sun, then the earth experiences moderate temperatures, resulting in spring or autumn seasons. It can be said that the earth's orbiting with its tilted axis is causing seasons and temperatures to change.Which of the following decisions would most likely be made by individuals or organizations using the geospatial data presented in
the map?
Select one answer
A. The decision of federal government officials to implement anti-natalist policies throughout the country to
decrease fertility rates.
B. A family deciding which Indian state to migrate to in order to find the best private schools for their children.
C. Multinational corporations deciding where to locate new factories in order to decrease production costs.
D. The United Nations' decision to issue a policy that would mandate local Indian governments to increase wages for
underage workers.
E. Orphaned children in less-developed regions of India deciding the best state for future relocation.
The correct answer is Option C. Multinational corporations deciding where to locate new factories in order to decrease production costs.
Option C - A multinational company determining where to place a new plant to reduce production costs - is the most likely decision to be made by an individual or group using the geographic data shown on the map.
The map shows India's population density and distribution, which can help businesses find more labor-intensive and available locations. Companies can reduce labor costs and increase efficiency by placing factories in densely populated areas.
The other options given are less likely to be influenced by the geographical data of the map. For example, anti-extremist laws, private school enrollment, and salary demands are more likely to be affected by social or political factors than population density.
Read more about geospatial data:
https://brainly.com/question/13138767
Explain how a geologist can use data gathered
from seismic stations on Earth's surface to describe the size and three-
dimensional shape of Earth's liquid core.
Seismic data collected from stations on Earth's surface can provide valuable information about the properties of the Earth's interior, including the size and three-dimensional shape of the liquid core.
By analyzing the way seismic waves travel through the Earth's layers, geologists can create detailed models of the Earth's interior that help to deepen our understanding of the planet's structure and evolution.
How do geologists use seismic data to determine the structure of the earth?Seismic waves produced by earthquakes or artificial sources like explosions travel through the Earth's interior and can be detected by seismic stations on the surface. By analyzing the speed and direction of these waves, geologists can determine the properties of the materials they pass through, including the liquid outer core.
Seismic waves pass through the Earth's solid and liquid layers at different speeds and can also be refracted or reflected when encountering different materials. By studying these wave patterns, geologists can create a detailed map of the Earth's interior, including the size and shape of the liquid core.
Read more about geologist
brainly.com/question/1490622
#SPJ1
Based on the diagram, which process explains how mid-ocean ridges are formed?
A. Less dense, hot magma rises to the surface to displace more dense, cooler magma, pushing the plates toward each other.
B. Convection currents in the core push the plates away from one another
C. Radiation from the sun cracks the lithosphere into pieces that drift apart
D. Less dense, hot magma rises to the surface to displace more dense, cooler magma, pushing the plates away from each other.
Answer: Based on the information given, the correct answer is D.
Explanation: Mid-ocean ridges are formed by a process called seafloor spreading, which occurs at divergent plate boundaries. At these boundaries, less dense, hot magma rises to the surface from the mantle and then cools to form new crust. As new crust is formed, it pushes the existing crust away from the ridge and toward the subduction zones. This process creates a continuous chain of volcanic ridges that runs through the middle of the world's oceans.
three types of rain are experienced in Pakistan monsoon depression convention a) each of these three type of rain is associated with rising air explain why rising air is needed to produce rain
Rising air is needed because it is the key process in gathering of clouds and precipitation. This is as a result of water evaporating from waterbodies due to heat from the sun, is taken into the atmosphere when it cool and condense it forms a heavy clouds that result to rain.
Rising air is produced in three ways in Pakistan summer monsoon winds rise up along the northern hills and mountains. rising air in depression which is low air pressure cloud system. Air rises due to low air pressure in depressions and clouds forms due to condensation. warm air rises due to convection. Heated land warm-up the air and it rises up, high altitude causes cooling, condensation take place and clouds are formed. This causes thunder storm and rainfall. Why in Pakistan a small amount of rain is experienced?In Pakistan small amount of rain is experienced because Pakistan is located on the far western edge of the south Asian monsoon region, with a predominantly arid desert climate and is sometimes affected by an offset of the monsoon, and normally receives far less rainfall than parts of India at the same latitudes
What time of the year does the three types of rain experienced in Pakistan occursmonsoon rain occurs from July to September
the Depression rain occurs from December to March
Convention rain occurs from May to June
Learn more about precipitation on brainly.com/question/13877944
#SPJ1
The complete question is
Three types of rain are experienced in Pakistan: Monsoon, Depression, Convection.
a) Each of these three types of rain is associated with rising air. Explain why rising air is needed
to produce rain.
b) For each of the three types, explain how rising air is produced in Pakistan.
c) For each of the three types of rain referred to in (a):
i. state the time of the year when it usually occurs in Pakistan;
ii. explain why in Pakistan a small amount of rain is usually experienced.
The Greater Antilles are home to ecosystems such as __________________________ , __________________________ , and __________________________ .
Answer:
marine and terrestrial ecosystems
Explanation:
What is elephant grass.
Answer: Elephant grass is a robust, rhizomatous, tufted perennial grass. It has a vigourous root system, developing from the nodes of its creeping stolons. The culms are coarse, perennial, and may be up to 4-7 m in height, branched above. Elephant grass forms dense thick clumps, up to 1 m across
Explanation:
interpretation of the folds of this outcrop can provide the geological history of this region. they tell a story about what happened years ago. what is the order of events and the result of stress and deformation? note that a rock layer is a single layer, which could be overlain or underlain by another layer, but anticlines and synclines are a series of rock layers. drag the appropriate labels to their respective targets.
The order of events for interpreting the folds of an outcrop is first to identify any anticlines or synclines present.
Anticlines are folds that have their oldest strata on the outside of the fold, and synclines have their oldest strata on the inside.
Stress and deformation result in rock layers that have been bent and folded, or even thrust over each other. These can form either an anticline or a syncline, depending on the amount and direction of the stress.
The interpretation of the folds of an outcrop can provide the geological history of the region, as the folds tell a story about the events that happened many years ago.
To know more about Anticlines click on below link:
https://brainly.com/question/2737818#
#SPJ11
what is the difference between a joint and a fault? question 4 options: a joint is formed by confining pressure while faults formed by differential stress a joint is formed by differential stress but a fault is not a fault displaces the rocks on one side relative to another while rocks on both side of joint are not displaced a fault is formed by tension but a joint is formed by compression
A joint is a crack or fracture in a rock that is formed by the confining pressure of the surrounding rock, and is not accompanied by any displacement.
On the other hand, a fault is a fracture or crack in a rock that is formed by differential stress, and results in displacement of the rocks on either side of the fault. Joints are generally the result of tectonic activity, while faults are the result of stress caused by faulting, folding and tectonic activity.
Joints are usually formed parallel to each other, while faults can be formed in any direction. Joints can be created by tensile and shear forces, while faults are only created by shear forces. Joints are usually vertical or horizontal, and can be formed in any direction, while faults are generally inclined. Finally, joints are usually planar surfaces, while faults are often curved.
Know more about Joint here
https://brainly.com/question/31054185#
#SPJ11
Which of the following is true about volcanic eruptions?
A.
Volcanic eruptions act as constructive forces when they blast away the sides of volcanoes.
B.
Volcanic eruptions act as constructive forces when volcanic gases cause acid rain that weathers rocks.
C.
Volcanic eruptions act as constructive forces when lava builds up to form volcanoes and plateaus.
D.
Volcanic eruptions never act as constructive forces because they do not build up landforms.
Based On this line graph, which of the following statements about japan is true
Answer:
Do you have the graph?
Explanation:
what 2 types of water treatment have in common?
what challenge do they face?
Answer:
cleanse the water of any microorganisms present in the water. With chlorine or chlorine dioxide, although chlorine can affect human health.
We can use other methods such as ozone treatment and ultraviolet radiation.
3. How are territorial citizens different from full citizens in terms of representation and voting
Rights ?
Territoriality citizens are individuals who reside in a U.S. territory such as Puerto Rico, Guam, or the U.S. Virg Islands, while full citizens reside in one of the 50 states.
The main difference between the two is that territorial citizens do not have the right to vote in presidential elections, and their representation in Congress is limited. They are represented by a non-voting delegate in the House of Representatives, who can introduce bills and speak on the floor, but cannot vote on legislation. In contrast, full citizens have the right to vote for their representatives in Congress and the President of the United States. This has been a topic of debate for many years, with some arguing that territorial citizens should have the same voting rights as full citizens.
For such more question on Territoriality
https://brainly.com/question/30203476
#SPJ4
How is Europe Physically diverse?
Answer:
The subcontinent of Europe is physically diverse with mountains, rivers, valleys, and lakes, especially considering its smaller size.
Explanation:
I'm comp
Explain the concept of world city using either economic or politi
characteristics
Answer:
Please read below:
Explanation:
World cities are cities that possess a high degree of economic and political power and influence within the global system.
They are centers of production, culture, finance, and communication, and act as nodes of global networks. They are also places where people from all over the world come to live and work and to access services, education, and entertainment. World cities are typically large metropolitan areas and are often the capital cities of their respective countries.
They are major hubs of global capital investment, business and finance, and international trade and commerce. They also tend to have large concentrations of people from different cultures and backgrounds, making them cosmopolitan and diverse.
World cities are important centers for the production and dissemination of ideas, culture, and technology.
They often have a high level of economic activity, with a large number of multinational corporations headquartered there, and are also important sites for international conferences, summits, and events.
An activist would most likely
A
stay silent about a problem.
B
participate in a peace march.
C
complain about having to recycle.
D
read about a local rally in the news but decide not to g
the correct option is: to participate in a peace march. Issue activists would most likely push their party to support a particular cause.
An activist is an individual who lobbies for a social change of some sort or another. At the point when you take part in a walk fighting the end of a local library, you're an activist. Somebody who's effectively engaged with dissent or a political or social reason can be called an activist.
Activists work to achieve social or political change on issues they care about. They might participate in various exercises — all with the objective to achieve positive change in the public eye and advance the prosperity of individuals and communities.
There are four unique jobs activists and social developments need to play to make a social change: the resident, rebel, change specialist, and reformer effectively. Every job has various purposes, styles, abilities, and needs and can be played really or ineffectually.
to know more about activists click here:
https://brainly.com/question/813316
#SPJ4
the complete question is:
Issue activists would most likely ____________.
What is significant about where the solutions for Lake Chad are coming from?
Answer: It provides water to four countries
Explanation: Because of where it is , it provides water to thirty million people in four countries surrounding the central part of The Sahel .
What is South Asiaʼs least common type of land use?
In your own words please!
Answer:
Most of the land in this part of the world is mostly used as a plantation. Agriculture is the main activity that land is used for.
After agriculture then there is the dense body and then the open forest use of land in the area.
Forty five percent of Chinese people live in ___?
Please answer if 100% sure this is for a test!
A. cities
B. swamp lands
C. Beijing
Forty five percent of Chinese people live in cities.
Which type of region is associated with central place theory?
Answer:
Complementary region
What is the Central Place Theory?CENTRAL PLACE THEORY (CPT)
It was originally published in 1933 by a German geographer Walter Christaller.It explains the spatial arrangement, size and number of settlements.Since this theory was based on Christaller’s study of settlement patterns in flat landscape of southern Germany, he stated that towns of similar size are usually equidistant.He, by studying and analyzing the functions, structure, patterns and hinterland of urban centres of different sizes, presented a model showing the hierarchy of settlements (based on their size, hinterland, and services provided) in geometric patterns.Thus it is a theory describing the spatial pattern of urbanization. There is no such economic theory which explains the reasons behind hierarchical arrangements of different sizes of urban centres.Applicability of Central Place Theory is limited when we talk about real world because:-
The assumptions of Christaller were unrealistic.He did not consider many factors which govern the pattern of urban economic development today. For example- Government intervention, fast and speedy automobiles, personal preference of consumers and suppliers etc.His study area- large flat lands (of southern Germany ) are rare to be found. Therefore accessibility is not uniform and centrality is greatly affected by the distance from and vicinity to major transport routes.However, this theory can still be related with the economic phenomena we observe today in urban centres, for example:-
Even though market areas are uneven, people still (largely) prefer to purchase from nearest markets to save money and time.
Most services are still provided by a few high order centres. Thus centres such as big malls attract consumers from a larger area, whereas the market areas of small order centres (village for example) are comparatively smaller. Villagers still come to towns to buy the goods and services of higher order, such as- cars, laptops etc.The goods and services provided by lower order centres are purchased more frequently than those provided by the higher order centres. For example- one purchases fruits more frequently than cars.Administrative divisions of states are hierarchical systems of spacing places, where an administrative center provides services to its adjoining areas of same order (for example a Gram Panchayat provides administrative, health and education services to its adjoining villages). The number of these centres keeps decreasing and their size keeps increasing as one moves upwards in hierarchy. This pattern conforms to CPT.There is somewhat hexagonal organization of central places in Central Mexico.Christaller of course could not foresee the technological advancement of present world, so his limitations were due to limits of his exposure. Technological development (online purchasing of goods and services being most revolutionary); personal preferences and; varied topography, opinions, income and location in the information sphere are few examples which govern the economic pattern of urban world today and found no place in CPT. But still the theory he gave has relevance even in today’s world.
When the best solar eclipse is
Answer:
The "best" solar eclipse is subjective and depends on personal preferences. However, a total solar eclipse is generally considered the most spectacular type of solar eclipse. During a total solar eclipse, the Moon completely covers the Sun, creating a spectacular display of the Sun's outer atmosphere, or corona, which is visible to the nked eye.
The best total solar eclipses are those that occur when the path of totality passes over a populated area, providing the opportunity for a large number of people to view the eclipse. Additionally, clear skies are important for optimal viewing of any solar eclipse.
The next total solar eclipse will occur on April 8, 2024, and will be visible from parts of North America, including Mexico, the United States, and Canada. This eclipse is expected to be a "great" eclipse, with a duration of up to 4 minutes and 28 seconds.
Explanation:
Which statement correctly describes the Australian Outback?
A.
The Australian Outback has many large cities in it.
B.
The Australian Outback is mostly a large desert.
C.
The Australian Outback is a hot and humid rain forest.
D.
The Australian Outback is a mountainous region with rich soil.
Answer:
B. The Australian Outback is mostly a large desert.
Explanation:
B. The Australian Outback is mostly a large desert.
The Outback is a vast, arid region in the interior of Australia. It is characterized by sparse vegetation, red soil, and extreme temperatures. It is home to a variety of wildlife, including kangaroos, dingoes, and emus. The Outback is also known for its vast open spaces, rugged terrain, and unique geological features.
Express cos UU as a fraction in simplest terms. 3 and 5 and 4
The fraction for cos UU in simplest terms is 3/4.The expression cos UU can be written as cos (2π) which is equal to 1. Therefore, the fraction in simplest terms is 1/1 which can be further simplified to just 1.
What is terms?Terms are the conditions of a contract or agreement between two or more parties. They are usually laid out in a written document, such as a terms and conditions agreement. Terms can vary from contract to contract and may include details such as payment schedules, length of contract, termination clauses, warranties, and any other details that the parties may need to agree upon. They are legally binding and can be enforced in a court of law.
To learn more about terms
https://brainly.com/question/29645340
#SPJ1
Look at the chart. Which of the following best explains why it is important to
compare fertility rates?
Population
(in millions), 2004
Total area
(in square miles)
Population density
(pop./sq mi)
Birthrate
Fertility rate
Bangladesh
141.3
55,598
2,542
30
3.3
Utah
2.4
82,144
29
21.2
2.5
OA. Population density is based on both fertility and historical
population levels.
OB. It shows that poverty levels have always been related to low
fertility rates.
OC. Fertility rate indicates the level of technology in a given nation.
OD. One can infer the adoption rate from the information.
Tracking fertility prices lets in for greater environment friendly and recommended planning and resource allocation within a precise region.
If a united states of america experiences strangely excessive sustained fertility rates, it may additionally want to build additional schools or extend access to inexpensive baby care.
Why is Total Fertility Rate Important?Knowing the TFR, alongside with mortality and migration projections, helps us estimate how a populace may grow, shrink, or stabilize over time. Data on the total fertility rate can additionally assist predict other demographic shifts, such as future age distributions inside a population.
Total fertility fee represents the wide variety of kids that would be born to a female if she have been to stay to the quit of her childbearing years and undergo youth in accordance with age-specific fertility charges of the distinctive year.
Learn more about Fertility Rate here:
https://brainly.com/question/14833800#SPJ1Define intensive agriculture
Answer: Intensive agriculture is a system of cultivation that uses large amounts of labor, capital, and other inputs such as machinery and chemicals in order to grow as many crops or keep as many animals as possible on a given area of land. The goal of intensive agriculture is to maximize agricultural production and increase yields. This is achieved through the use of advanced farming techniques and technologies, such as irrigation systems, fertilizers, pesticides, and high-yield crop varieties.
Answer:
Intensive agriculture, in agricultural economics is sysis a system of cultivation using large amounts of labour and capital relative to land area.