_______ WILL BOIL AT A TEMPERATURE SAME WITH 2 m sugar solution

Answer:

Here is my project that I turned in for this assignment :) It has all the answers including the graph, answers to the questions, and the summary paragraph. I also labeled the parts to make it easier for you see which part is which. Lastly I'm very sorry if my handwriting is not readable for you :( but I tried my best to help.

Explanation:

The given statement "A liquid is less fluid than a gas because 9 of 10. select choice attractions interfere with the ability of particles to flow past one another" is True.

A liquid is less fluid than a gas because of the intermolecular attractions that exist between its particles. In liquids, the molecules are more closely packed and have stronger intermolecular forces compared to gases. These intermolecular attractions interfere with the ability of the particles to flow past one another, making liquids less fluid than gases.

In gases, the particles are farther apart, and the intermolecular forces are weaker. The weak intermolecular forces between gas particles allow them to move freely and quickly, resulting in high fluidity. The particles can easily slide past one another, and the gas can fill any container it is placed in.

Therefore, due to the strong intermolecular forces present in liquids, their particles cannot flow past each other as easily as gas particles can. This results in liquids being less fluid than gases, and they take the shape of the container in which they are placed. In summary, the statement "a liquid is less fluid than a gas because 9 of 10 select choice attractions interfere with the ability of particles to flow past one another" is true.

To know more about liquids, refer to the link below:

https://brainly.com/question/25738515#

#SPJ11

The H₂0 ion concentration of a solution is (1 x 10⁻⁴) mole per liter. To determine the pH of the solution, we can use the equation pH = -log[H+], where [H+] represents the hydrogen ion concentration. The correct answer is A) acidic and has a pH of 4.

In this case, the hydrogen ion concentration is (1 x 10⁻⁴) mole per liter. Taking the negative logarithm of this concentration, we have:

pH = -log((1 x 10⁻⁴)) = -(-4) = 4

Therefore, the solution is acidic and has a pH of 4.

The correct answer is A) acidic and has a pH of 4.

Learn more about concentration ,

https://brainly.com/question/10725862

#SPJ4

Whereas physical changes entail a change in a substance's physical attributes without the creation of new substances, chemical changes involve the rearranging of atoms and the creation of new substances.

According to the concept of "The Lost Isle of Change," once a material experiences a chemical shift, it is difficult to restore it to its previous condition, much like an island that vanishes after it has sunk. Nonetheless, substances that are changing physically are frequently simple to reverse, much like an island that may reemerge as the sea recedes. In conclusion, physical changes frequently entail a change in physical attributes, whereas chemical changes involve the synthesis of new substances and are reversible. The irreversibility of chemical changes is symbolised by "The Lost Island of Change."

learn more about physical changes here:

brainly.com/question/17931044

#SPJ4

Full Question

What is the difference between chemical and physical changes, and how do they relate to the concept of "The Lost Isle of change"?

Answer:

true

Explanation:

The stoichiometric concept is used here to determine the mass of Fe₂O₃. The term chemical stoichiometry is the quantitative study of the reactants and products involved in a chemical reaction. Here the mass of Fe₂O₃ is 507 g.

Stoichiometry is an important concept in chemistry which helps us to use the balanced chemical equations to find out the mass of products and reactants. Here we make use of the ratios from the balanced equation.

The molar masses of Fe₂O₃ and Al₂O₃ are 159.687 g and 101.961 g, respectively.

Mass of Fe₂O₃ = 324 g Al₂O₃ × 1 mol Al₂O₃ / 101.961 g Al₂O₃ × 1 mol Fe₂O₃/ 1 mol Al₂O₃ × 159.687 g Fe₂O₃ / 1 mol Fe₂O₃ = 507 g

To know more about Stoichiometry, visit;

https://brainly.com/question/29775083

#SPJ1

Yes, a miscibility gap exists for a mixture of water and 1-butanol at 928C. The range of compositions over which this gap exists is between the eutectic point and the upper cloud point.

The eutectic point is the composition where the two components form two liquid phases, and the upper cloud point is the composition where the two components form a single liquid phase.

The van Laar parameters for this system (L12) indicate the degree to which changes in temperature, pressure, and composition affect the relative solubility of the two components.

For a mixture of 1-butanol and water at 928C, the relative solubility of the two components decreases as the composition deviates from the eutectic point, resulting in a miscibility gap. The range of compositions over which this gap exists is determined by the van Laar parameters.

Know more about eutectic point here

https://brainly.com/question/31382998#

#SPJ11

In the reaction: HOCl(aq) + H₂O(l), the acid, base, conjugate acid, and conjugate base are as follows:

1. Acid: HOCl(aq) - This is the acid because it donates a proton (H⁺) in the reaction.
2. Base: H₂O(l) - This is the base because it accepts a proton (H⁺) from the acid.
3. Conjugate Acid: H₃O⁺(aq) - After H₂O accepts a proton from HOCl, it forms the conjugate acid H₃O⁺.
4. Conjugate Base: OCl⁻(aq) - After HOCl donates a proton, it forms the conjugate base OCl⁻.

So, in the end the reaction can be written as: HOCl(aq) + H₂O(l) ⇌ H₃O⁺(aq) + OCl⁻(aq).

To know more about the acid & base refer here :

https://brainly.com/question/3941445#

#SPJ11

Before any base is added, the pH of the naproxen solution is 2.60. At the half-equivalence point, the pH of the naproxen solution is 3.10. At the equivalence point, the pH of the naproxen solution is not provided in the given information.

Naproxen is a weak acid, and its dissociation reaction can be written as follows:

Naproxen (HA) ⇌ Naproxen⁻ (A⁻) + H⁺

The equilibrium constant expression for this reaction can be written as:

Ka = [A⁻][H⁺]/[HA]

where Ka is the acid dissociation constant, [A⁻] is the concentration of the conjugate base, [H⁺] is the concentration of hydrogen ions, and [HA] is the concentration of the weak acid.

The pKa of naproxen is given as 4.2, which means that:

pKa = -log Ka

4.2 = -log Ka

Ka = 10^(-4.2)

Ka = 6.31 x 10⁻⁵

(a) Before any base has been added, the concentration of H⁺ ions can be calculated using the expression:

Ka = [A⁻][H⁺]/[HA]

At the start of the titration, the concentration of the weak acid HA is 0.1 M, and the concentration of its conjugate base A^- is zero. Therefore, we can write:

Ka = [H⁺][A⁻]/[HA]

[H^+] = sqrt(Ka x [HA])

[H^+] = sqrt(6.31 x 10^(-5) x 0.1) = 2.52 x 10⁻³M

pH = -log[H⁺] = -log(2.52 x 10⁻³) = 2.60

Therefore, the pH before any base has been added is 2.60.

(b) At the half-equivalence point, half of the weak acid has been neutralized by the added base. At this point, the moles of weak acid and the moles of added base are equal. Therefore, the concentration of the weak acid and the conjugate base are equal.

At the half-equivalence point, the number of moles of NaOH added is:

0.5 L x 0.01 M = 0.005 moles

Since naproxen is a monoprotic acid, the number of moles of weak acid at the half-equivalence point is also 0.005 moles. Therefore, the concentration of weak acid is:

[HA] = 0.005 moles / 0.5 L = 0.01 M

At the half-equivalence point, the concentration of the conjugate base is also 0.01 M.

The equilibrium constant expression can be written as:

Ka = [A⁻][H⁺]/[HA]

At the half-equivalence point, [A⁻] = [HA] = 0.01 M. Therefore,

Ka = [H⁺]² / 0.01

[H^+] = sqrt(Ka x 0.01) = sqrt(6.31 x 10⁻⁵ x 0.01) = 7.94 x 10⁻⁴ M

pH = -log[H⁺] = -log(7.94 x 10⁻⁴) = 3.10

Therefore, the pH at the half-equivalence point is 3.10.

(c) At the equivalence point, all of the weak acid has been neutralized by the added base. Therefore, the concentration of the weak acid is zero, and the concentration of the conjugate base is equal to the initial concentration of the weak acid.

The number of moles of NaOH added at the equivalence point is:

0.5 L x 0.01 M = 0.005 moles

To know more about the Naproxen refer here :

https://brainly.com/question/5444482#

#SPJ11

The main hazards associated with using centrifuges include broken tubes, aerosol formation, unbalanced samples, and spilling samples.

Broken tubes can occur when the centrifuge tubes are damaged or overfilled, leading to leakage or breakage during operation. This can result in sample loss, contamination, and damage to the centrifuge rotor and other tubes.
The aerosol formation is another hazard, that occurs when the sample is spun too rapidly. High-speed centrifugation can cause the release of tiny liquid droplets, forming an aerosol. This can lead to the spread of hazardous materials or infectious agents, posing a risk to the user and environment.
Unbalanced samples pose a significant hazard as they can cause excessive vibration during centrifugation. This imbalance can lead to rotor destruction, which may damage the centrifuge and result in costly repairs or replacement. To prevent this, ensure equal sample volumes and masses are loaded symmetrically across the rotor.
Lastly, spilling samples is a risk since centrifuge tubes have round bottoms. Spilt samples can contaminate other samples, the rotor, and the centrifuge chamber, affecting the integrity of the experiment. To minimize this risk, securely cap the tubes and handle them with care when loading and unloading the centrifuge.
In conclusion, to ensure safety and accurate results when using a centrifuge, be mindful of potential hazards such as broken tubes, aerosol formation, unbalanced samples, and spilling samples. By taking necessary precautions and following proper procedures, these risks can be mitigated.

To learn more about aerosol formation, refer:-

https://brainly.com/question/31491688

#SPJ11

The pH at the endpoint recorded in the datasheet should be compared to this calculated pH value. If they are similar, it indicates that the endpoint of the titration was reached accurately and precisely.

OH- (aq) + HT (aq) ⇌ T2- (aq) + H2O (l)

I 0.1 M 0 0

C -x -x +x

E 0.1-x -x +x

Ks = [T2-][H+]/[HT][OH-] = 2.2 x 10^-10

Substituting the concentrations into the expression:

2.2 x [tex]10^{-10}[/tex] = x²/(0.1-x)²

x = 1.48 x [tex]10^{-6}[/tex]

Since [OH-] = 1.48 x [tex]10^{-6}[/tex]M and [H+] = [OH-], the pH of the solution at the endpoint is:

pH = -log[H+] = -log[OH-] = -log(1.48 x [tex]10^{-6}[/tex]) = 5.83

pH is a measure of the acidity or basicity of a solution, with pH values ranging from 0 to 14. It is defined as the negative logarithm of the concentration of hydrogen ions in the solution. A solution with a pH of 7 is considered neutral, indicating an equal concentration of hydrogen ions and hydroxide ions.

Solutions with a pH less than 7 are considered acidic, indicating a higher concentration of hydrogen ions, while solutions with a pH greater than 7 are considered basic or alkaline, indicating a higher concentration of hydroxide ions. The pH scale is logarithmic, meaning that a change in one pH unit represents a tenfold change in the concentration of hydrogen ions. For example, a solution with a pH of 4 is ten times more acidic than a solution with a pH of 5.

To learn more about pH visit here:

brainly.com/question/2288405

#SPJ4

The neutralization reaction between an acid and base is given as,

"H₂CO₃ + KOH → K₂CO₃ + H₂O"

Generally a neutralization reaction is usually described as a chemical reaction which involves reaction of an acid and a base and they react quantitatively together in order to form a salt and water as by-products. Basically in a neutralization reaction, a combination of H⁺ ions and OH⁻ ions is present which effectively forms water.

So, the products formed from neutralization reactions are salt and water. Generally the pH of the salt and water solution is always neutral (pH =7).

Hence, the neutralization reaction is given as,

"H₂CO₃ + KOH → K₂CO₃ + H₂O"

Learn more about neutralization reaction from the link given below.

https://brainly.com/question/28970253

#SPJ1

According to Newton's second law of motion, if force remains the same but mass increases, then acceleration will decrease.  Therefore, option (c) decrease is the correct answer.

This can be represented by the equation F=ma, where F is the force applied, m is the mass of the object, and a is the resulting acceleration. If the force is constant and the mass increases, the acceleration must decrease in order to maintain the equation's balance.   As the mass increases, it becomes more difficult for the force to accelerate the object at the same rate. The increased mass creates greater inertia, resisting changes in motion and resulting in a decrease in acceleration.

Learn more about Newton's second law

https://brainly.com/question/13447525?

#SPJ4

Full Question ;

According to newton's second law of motion, if force remains the same but mass increases, then acceleration will ______

a. increase

b. stay the same

c. decrease

d. not be measurable

The efficiency rating of a general anode made from magnesium is typically around 50%. This means that roughly half of the anode material will be consumed during the process of protecting the metal structure from corrosion. However, the actual efficiency of a magnesium anode can vary depending on a number of factors.

The composition of the surrounding electrolyte, the size and shape of the anode, and the current density applied to the system. Despite its relatively low efficiency rating, magnesium is a popular choice for general anodes because it is lightweight, cost-effective, and highly effective at preventing corrosion in many different environments. Magnesium anodes are commonly used in marine applications, as well as in the oil and gas industry, where they are used to protect pipelines and other metal structures from corrosion caused by exposure to saltwater or other harsh conditions. In order to ensure the most effective protection against corrosion, it is important to carefully select and properly install the appropriate anode for a given application. This may involve consulting with an expert in corrosion prevention or conducting testing to determine the optimal anode material and configuration for a particular system.

learn more about magnesium here.

https://brainly.com/question/1533548

#SPJ11

The Molar solubility and the solubility of each salt at 25°C.

(a) PbF₂ Ksp = 4.0 x 10⁻⁸ ,  1.8 x 10⁻⁷ M, 4.41 x 10⁻⁵  g/L

(b) Ag₂CO₃ Ksp = 8.1 x 10⁻¹²,  1.2 x 10⁻⁴ M,  0.0398 g/L

(c) Bi₂S₃ Ksp = 1.6 x 10⁻⁷² , 3.2 x 10⁻¹⁶M,  1.65 x 10⁻¹³ g/L

(a) PbF₂:

Ksp = [Pb₂+][F-]²

Let x be the molar solubility of PbF₂. Then, [Pb2+] = x and [F-] = 2x. Substituting into the Ksp expression and solving for x:

4.0 x 10⁻⁸ = x*(2x)²

x = 1.8 x 10⁻⁷ M

To convert to g/L, we need to multiply by the molar mass of PbF₂ (245.2 g/mol):

solubility = 1.8 x 10^-7 * 245.2 = 4.41 x 10⁻⁵ g/L

(b) Ag₂CO₃:

Ksp = [Ag+]²[CO₃²⁻]

Let x be the molar solubility of Ag₂CO₃. Then, [Ag+] = 2x and [CO₃²⁻] = x. Substituting into the Ksp expression and solving for x:

8.1 x 10⁻¹² = (2x)² * x

x = 1.2 x 10⁻⁴ M

To convert to g/L, we need to multiply by the molar mass of Ag2CO3 (331.8 g/mol):

solubility = 1.2 x 10⁻⁴ * 331.8 = 0.0398 g/L

(c) Bi₂S₃:

Ksp = [Bi³⁺]²[S²⁻]³

Let x be the molar solubility of Bi₂S₃. Then, [Bi3+] = 2x and [S2-] = 3x. Substituting into the Ksp expression and solving for x:

1.6 x 10⁻⁷² = (2x)²*(3x)³

x = 3.2 x 10⁻¹⁶

To convert to g/L, we need to multiply by the molar mass of Bi₂S₃ (514.2 g/mol):

solubility = 3.2 x 10⁻¹⁶ * 514.2 = 1.65 x 10⁻¹³ g/L

In summary, using the suitable Ksp formula and solving for the unknown variable, we can compute the molar solubility and solubility in g/L of salt at a particular temperature. The molar solubility is represented in M units, but the solubility in g/L is calculated by multiplying the molar solubility by the salt's molar mass. The Ksp value indicates the salt's dissolving equilibrium constant and gives information on the relative solubility of various salts under the same circumstances.

Learn more about Molar Solubility:

https://brainly.com/question/28202068

#SPJ4

The enthlpy of the reaction can be calculated as 720 kJ/mol.

Enthalpy is a thermodynamic property that is related to the internal energy and the work done by or on a system. If the enthalpy change is positive, it means that the reaction is endothermic and absorbs heat from the surroundings.

We know that reaction enthalpy = Bonds broken - Bonds formed

Thus we have that;

[4(413) + 4(240)] - [4(416) + 4(432)]

(1652 + 960) - (1664 + 1728)

2612 - 1892

= 720 kJ/mol

Learn more about reaction enthalpy:https://brainly.com/question/1657608

#SPJ1

9.21g is the mass in gram of LiCI (Lithium chloride) (molar mass = 42.0 g/mol) would be needed to prepare 350 ml of 0.630 M LiBr solution.

A body's mass is an inherent quality. Prior to the discoveries of the atom as well as particle physics, it was widely considered to be tied to the amount of matter within a physical body.

It was discovered that, despite having the same quantity of matter in theory, different atoms and elementary particles have varied masses. There are various conceptions of mass in contemporary physics that are theoretically different but physically equivalent.

Molarity = number of moles/ volume of solution in liter

volume = 350/1000=0.35L

0.630 = number of moles/ 0.35

number of moles= 0.22

mass = 0.22× 42.0

         =9.21g

To know more about mass, here:

https://brainly.com/question/19694949

#SPJ1

When comparing NO(g) and NO₂(g) at 300 ∘C and 0.01 atm, one mole of NO₂(g) possesses the larger entropy per mole. When comparing H₂O(g) and H₂O(l) at 100 ∘C and 1 atm, one mole of H₂O(g) possesses the larger entropy per mole. When comparing O₂(g) and CH₄(g) at 298 K and 20-L volume, one mole of O₂(g) possesses the larger entropy per mole. When comparing Na₂CO₃(s) and Na₂CO₃(aq) at 30 ∘C, they have the same entropy per mole .

PART A: When comparing NO(g) and NO₂(g) at 300 ∘C and 0.01 atm, one mole of NO₂(g) possesses the larger entropy per mole.

This is best explained because NO₂(g) is a more complex molecule than NO(g) with more vibrational degrees of freedom. This means that NO₂(g) has more ways in which it can store energy, leading to a higher entropy.

PART B: When comparing H₂O(g) and H₂O(l) at 100 ∘C and 1 atm, one mole of H₂O(g) possesses the larger entropy per mole.

This is because in the gaseous state, H₂O molecules have more freedom of movement and can occupy a larger volume, leading to a higher entropy.

PART C: When comparing O₂(g) and CH₄(g) at 298 K and 20-L volume, one mole of O₂(g) possesses the larger entropy per mole. This is because O₂(g) is a diatomic molecule with more degrees of freedom than CH₄(g), which has a more complex structure with fewer degrees of freedom.

PART D: When comparing Na₂CO₃(s) and Na₂CO₃(aq) at 30 ∘C, they have the same entropy per mole since the state of matter (solid or aqueous) does not affect the entropy of a substance.

Learn more about entropy

https://brainly.com/question/13135498

#SPJ4

Atoms in radioactive materials naturally decay. They are capable of emitting gamma radiation, beta radiation, and alpha radiation.

Thus, They cannot be turned off, so controlling them is more challenging than controlling X-ray sources. Gamma radiation emitters that can be utilized for industrial radiography, like iridium 192, can be used to radiograph thick portions of steel and other metals.

These are also utilized within shielded enclosures, however because the sources cannot be electrically shut off, they are kept inside protected containers.

The source is projected from the container through a guide tube to the area of use, then retracted.

Thus, Atoms in radioactive materials naturally decay. They are capable of emitting gamma radiation, beta radiation, and alpha radiation.

Learn more about Radiation, refer to the link:
https://brainly.com/question/13934832

#SPJ1

When DNA is placed between the interface of both solutions, it goes through electrostatic interaction or electrostatic attraction.

As DNA is a negatively charged molecule DNA is placed between the interface of both solutions, it undergoes the electrostatic interaction. It interacts with the charged species present in the solution, such as cations (positively charged ions) and anions (negatively charged ions).

It interacts with both solutions and forms a layer of ions between the interface of the two solutions. It helps in the stabilization of the DNA in the interface layer.

In the case of water and ethanol solution, ethanol molecules interact with the hydrophobic bases of DNA, while the water molecules interact with the hydrophilic sugar-phosphate backbone. This stabilizes the DNA molecule at the interface of the two solutions.

Learn more about Electrostatic interaction is :

https://brainly.com/question/29788201

#SPJ4

The least polar bond among the given options is C-H.

When the atoms in a covalent connection have various electronegativities—the capacity of an atom to draw electrons toward it—the result is polarity. The bond becomes more polar as the difference in electronegativity between the two atoms increases.

Carbon (C) and hydrogen (H) are the two alternatives that have the smallest electronegativity differences, with C having an electronegativity of 2.55 and H having an electronegativity of 2.20 on the Pauling scale. The C-H bond is therefore the least polar bond available among the choices.

The remaining bonds on the list, in comparison, have bigger disparities in electronegativity, which increases bond polarity. For instance, the C-O bond is a polar bond because of the higher electronegativity gap between C and O. The P-F and C-F bonds, which are the most polar of the available possibilities, also have the highest electronegativity discrepancies.

In conclusion, the C-H bond is the least polar bond among the available possibilities because of the minimal difference in electronegativity between the two atoms.

To know more about the polar bond refer here :

https://brainly.com/question/24775418#

#SPJ11

The results of the experiments can be said to be in line with the law of multiple proportions.

The law of multiple proportions states that when two elements combine to form two or more compounds, the ratio of the masses of one element that mix with a fixed mass of the other element can be expressed in whole numbers.

In the two experiments, it is obvious that the ratio of the copper to the oxygen in the compounds are almost the same and this is in line with the statement of the law of multiple proportions.

Learn more about multiple proportions:https://brainly.com/question/28458716

#SPJ1

A heating curve illustrates the changes in the temperature and physical state of a substance as it is heated (Option D).

The changes in the temperature and physical state shows how the substance absorbs heat and undergoes changes in its physical state, such as melting or boiling, as its temperature increases. It does not illustrate chemical changes that may occur. It also indicates phase transitions, such as melting and boiling points, where the substance changes its physical state.

Learn more about heating curve: https://brainly.com/question/10481356

#SPJ11

Monodeuteriomethane is a type of molecule that contains one deuterium atom and three hydrogen atoms. In a disordered crystal of monodeuteriomethane, each tetrahedral CH3D molecule can be oriented randomly in one of four possible ways.

A) Using Boltzmann's formula, the entropy of the disordered state of a crystal containing 140 molecules can be calculated as S = klnW, where k is Boltzmann's constant and W is the number of microstates. The number of microstates for a crystal containing 140 molecules can be calculated as W = 4^140. Thus, S = kln(4^140) = 140kln4 + ln(140!) ≈ 1.69 × 10^25 J/K. B) To calculate the entropy of the disordered state of a crystal containing 1 mol of molecules, we need to know the Avogadro's number, which is approximately 6.022 × 10^23 molecules/mol. Thus, the number of molecules in 1 mol of monodeuteriomethane is 4 × 6.022 × 10^23 = 2.409 × 10^24 molecules. Using Boltzmann's formula, the entropy can be calculated as S = klnW, where W = 4^(2.409 × 10^24). Therefore, S ≈ 4.58 × 10^51 J/K. C) If the C-D bond of each of the CH3D molecules points in the same direction in a crystal containing 14 molecules, then there are only two possible orientations for each molecule. Thus, the number of microstates is W = 2^14, and the entropy can be calculated as S = kln(2^14) = 14kln2 ≈ 9.09 × 10^-22 J/K. D) If the C-D bond of each of the CH3D molecules points in the same direction in a crystal containing 140 molecules, then the number of microstates is W = 2^140, and the entropy can be calculated as S = kln(2^140) = 140kln2 ≈ 9.09 × 10^-20 J/K. E) To calculate the entropy of the crystal if the C-D bond of each of the CH3D molecules points in the same direction in a crystal containing 1 mol of molecules, we need to know the Avogadro's number. Thus, the number of molecules in 1 mol of monodeuteriomethane is 4 × 6.022 × 10^23 = 2.409 × 10^24 molecules. The number of microstates for 1 mol of monodeuteriomethane is W = 2^(2.409 × 10^24), and the entropy can be calculated as S = klnW. Therefore, S ≈ 4.54 × 10^50 J/K. In summary, the entropy of a crystal of monodeuteriomethane depends on the number of molecules in the crystal, the number of possible orientations for each molecule, and the direction of the C-D bond of each molecule. The more disordered the crystal, the higher the entropy, and the more ordered the crystal, the lower the entropy.

Learn more about hydrogen atoms here-

https://brainly.com/question/29695801

#SPJ11

I- and Cl- are isoelectronic with Ar, as they both have the same number of electrons as the noble gas.

"Isoelectronic" means having the same number of electrons. Ar has 18 electrons, so we need to find ions that also have 18 electrons. Ba2+ has 56 electrons, so it's not isoelectronic. S2- has 18 electrons, so it is isoelectronic. Al3+ has 13 electrons, so it's not isoelectronic. K+ has 19 electrons, so it's not isoelectronic. Finally, I- and Cl- both have 18 electrons, so they are both isoelectronic with Ar.

Learn more about Isoelectronic here:

https://brainly.com/question/6807313

#SPJ11

The major product of [tex]CH_{3} CH_{2}[/tex] and [tex]Br_{2}[/tex] reaction is 1,2-dibromoethane, with anti-stereochemistry, and optically inactive stereoisomers.

The response somewhere in the range of [tex]CH_{3} CH_{2}[/tex] and [tex]Br_{2}[/tex] will go through a halogenation response, where the bromine molecules will be added across the twofold bond. The significant result of this response is 1,2-dibromoethane.

The component of this response includes the development of a bromonium particle halfway, where the bromine atom is captivated by the twofold obligation of the alkene. The bromine particle will then, at that point, assault one of the carbons of the twofold bond, framing a bromonium particle halfway.

The bromine particle will then go after the other carbon of the twofold bond, breaking the bromonium particle middle and framing the item.The option of the bromine particles to the twofold bond happens with against stereochemistry, implying that the two bromine molecules will be added to inverse countenances of the twofold bond.

This outcomes in the development of a meso compound with two stereoisomers. Be that as it may, since both stereoisomers have an inward plane of balance, they are optically latent.

In this way, the significant result of the response somewhere in the range of [tex]CH_{3} CH_{2}[/tex] and [tex]Br_{2}[/tex] is 1,2-dibromoethane, with two stereoisomers that are optically dormant because of their inward plane of evenness.

To learn more about stereochemistry reactions, refer:

https://brainly.com/question/29748314

#SPJ4

In the given reaction N2 (g) + 3H2 (g) â 2NH3 (g), the reactants are N2 and H2, and the product is NH3.

During the course of the reaction, the reactants will decrease in concentration as they are being consumed to form the product. Therefore, both N2 and H2 will decrease in concentration. At the same time, the concentration of the product NH3 will increase.

The reaction stoichiometry tells us that one molecule of N2 reacts with three molecules of H2 to produce two molecules of NH3. This means that the decrease in concentration of N2 will be twice as much as the decrease in concentration of H2.

For such more question on reactants:

https://brainly.com/question/26283409

#SPJ11

The following question may be like this:

If only reactants are initially added to a reaction flask, which species decrease in concentration during the course of the reaction N2 (g) + 3H2 (g) â 2NH3 (g)? Select all that apply.

The equation ch4 + o2 --> co2 + h2o is balanced using the smallest possible integers, the coefficient for water is 2. To balance the equation, we need to make sure that the number of atoms of each element is the same on both sides of the equation. On the left side of the equation, we have one carbon atom, four hydrogen atoms, and two oxygen atoms.

The right side, we have one carbon atom, two hydrogen atoms, and two oxygen atoms from the carbon dioxide and water molecules. To balance the hydrogen atoms, we need to put a coefficient of 2 in front of the water molecule, which gives us 2H2O. This gives us a total of four hydrogen atoms on both sides of the equation. Now, we have two oxygen atoms on the left side and four on the right side. To balance the oxygen atoms, we need to put a coefficient of 2 in front of the oxygen molecule, which gives us 2O2. This gives us a total of four oxygen atoms on both sides of the equation. Finally, we have one carbon atom on both sides of the equation, which means that all the elements are balanced. Therefore, the coefficient for water is 2.

learn more about water here.

https://brainly.com/question/28465561

#SPJ11

pH 1st = [tex][H+] = sqrt(Ka*[HA]) = sqrt(1.5 * 10^{-2} * 0.000565) = 0.00576 M[/tex]. The pH at the equivalence point of the second stage will be higher than that of the first stage due to the excess of NaOH.

For more such question on pH

https://brainly.com/question/12609985

#SPJ11