Answer:
If observed through the year, the constellations shift gradually to the west. This is caused by Earth's orbit around our Sun. In the summer, viewers are looking in a different direction in space at night than they are during the winter.
Explanation:
Answer:
there it the fact that the earthisspinningand so the starsare staying still and we are spinning
Which will diffuse the most? The particles with the
A. Least potential energy.
B. Most potential energy.
C. Least kinetic energy.
D. Most kinetic energy.
Answer:
B. Most potential energy
Explanation:
brainest plz
The chemical formula for the ionic compound aluminum sulfite is Al2(SO3)3. Explain why there are 2 cations for every 3 anions in this compound.
Answer:
Explanation:
While trying to write the chemical formula for a compound (a neutral molecule), one must identify and exchange the charge of the cation with that of the anion to become the subscript of one other. For example
Aluminium oxide has Aluminium (Al) and oxygen (O); since Al has a charge of 3+ (the cation) and O has a charge of 2- (the anion), the compound would have it's charges as Al³⁺O²⁻ and when the charges are exchanged to there subscripts, it would form Al₂O₃; thus there would be two cations of aluminium for every three anions of oxygen in order to have a neutral molecule.
This same explanation can be given to Aluminium sulfite. Aluminium sulfite has Aluminium (Al) and sulfite (SO₃). Al has a charge of 3+ (cation) while sulfite has a charge of 2- (anion), with the compound having it's charges as Al³⁺(SO₃)²⁻ and when the charges are exchanged to there subscripts, it would form Al₂(SO₃)₃ and would thus have 2 cations of aluminium (Al³⁺) for every 3 anions of sulfite (SO₃³⁻) in order to have a neutral molecule.
a metal worker uses a cutting torch that operates by reacting acetylene gas, C2H2(g), with oxygen gas, O2(g), as shown in the unbalanced equation below: C2H2(g)=O2(g)= CO2(g) = H2O(g) = heat determine the mass of 25 moles of acetylene (gram-formula mass = 26 g/mol
Answer:
650 grams
Explanation:
Given that acetylene gas reacts with oxygen to produce caobon dioxide, water and heat and the unbalnced equation is
[tex]C_2H_2(g)+O_2(g) \rightarrow CO_2(g) + H_2O(g)+ heat[/tex]
Gram-formula mass of [tex]C_2H_2= 26[/tex] g/mol
So, mass of 1 mole of acelylene is 26 grams
Therefore, mass of 25 moles of acelylene=25x26=650 grams
Hence, the mass of 25 moles of acelylene is 650 grams
The mass of 25 moles of acetylene has been 0.65 kg.
Moles are the count of a number of molecules in an entity and the mass based on the formula mass. 1 mole of a substance has [tex]\rm 6.023\;\times\;10^2^3[/tex] molecules.
The moles can be calculated as:
Moles = [tex]\rm \dfrac{weight}{molecular\;weight}[/tex]
Given, mole of acetylene = 25 mol
molecular mass of acetylene = 26 g/mol
Mass of acetylene = moles [tex]\times[/tex] molecular weight
Mass of acetylene = 25 [tex]\times[/tex] 26
Mass of acetylene = 650 grams
1000 grams = 1 kg
650 grams = 0.65 kg.
The mass of 25 moles of acetylene has been 0.65 kg.
For more information about the mass, refer to the link:
https://brainly.com/question/18838161
19. Luke wants to create an aqueous solution that conducts electricity. Which of the following compounds should
he use?
a) KNO3
b) C12H22O11
c) C2H5OH
d) NH4OH
Answer:
I think b) C12H22O11.
Hope this answer is helpful for u.
Please Help ASAP 100 points! Students set up a controlled experiment. They put five crickets in each of three identical containers. They set one container to 15C, one to 20C and one to 25C. Then they count the number of cricket chirps in each container during 1 hour. What are the TWO constants in this experiment? A: The number of crickets in each container. B:The temperature of each container. C: The number of cricket chirps. D: The kind of containers used.
Answer:
A and C.
Explanation:
A cylinder, with a piston pressing down with a constant pressure, is filled with 2.10 moles of a gas (n1), and its volume is 46.0 L (V1). If 0.700 mole of gas leak out, and the pressure and temperature remain the same, what is the final volume of the gas inside the cylinder?
Answer:
The volume is [tex]V_2 =15.33 \ L[/tex]
Explanation:
From the question we are told that
The number of moles of the gas is [tex]n_1 = 2.10 \ moles[/tex]
The volume of the gas is [tex]V = 46.0 \ L[/tex]
The of moles of the gas that leaked is [tex]n_2 = 0.700 \ mol[/tex]
Generally from the ideal gas law
[tex]PV = nRT[/tex]
Generally at constant pressure and temperature
[tex]\frac{V}{n} = constant[/tex]
So [tex]\frac{V_1 }{n_1} = \frac{V_2 }{n_2}[/tex]
=> [tex]V_2 = \frac{ V_1 * n_2 }{ n_1}[/tex]
=> [tex]V_2 = \frac{ 46.0 * 0.700 }{ 2.10 }[/tex]
=> [tex]V_2 =15.33 \ L[/tex]
The chemical formula for the ionic compound aluminum sulfite is Al2(SO3)3. Explain why there are 2 cations for every 3 anions in this compound.
my mom !!!Explanation:
Musscle man
What type of energy is transmitted from the Sun to Earth through space?
Answer:
solar energy
Explanation:
How many valence electrons does this atom have? (Urgent)
Answer:
It only has 7 valence electrons because there are seven electrons in the highest orbital.
Explanation:
Which is a component of John Dalton’s atomic theory?
The ratio of atoms in a compound is fixed.
The atoms of different elements are the same.
An atom is a small particle of matter that can be broken down.
A reaction can create or destroy atoms as well as rearrange them.
Answer: lol the answer is A
Explanation:
i’m just smart like that , thought i should give y’all a clue
Answer:
The ratio of atoms in a compound is fixed.
Explanation:
its a
Liquid or solid water that falls to the ground is called
d) velocity ratio =_________ Iload distance
Answer:
velocity ratio is defined as the ratio of distance moved by effort and load in the same time interval
Explanation:
1. An element is defined by the number of:
Electrons
Protons
Neutrons
Chemical Bonds
lons
Answer:
The correct answer for this question would be B) Protons
Explanation:
I got it right on my test (Can I have brainlyest)
Part A Read each sentence. Write the letter of the correct answer on the line.
1. Which of the following would result in a chemical change?
A boiling water
C tearing paper
B burning wood
D melting wax
Have you ever seen a building that looks as if it were made out of mirrors? These buildings are made using reflective glass. How would
replacing clear windows with reflective glass affect the temperature inside the building? Explain your ideas.
Answer:
the sun would reflect off of the windows causing less heat to travel into the building
Explanation:
The diagram above represents the melting of H2O(s). A 2.00mole sample of H2O(s) at 0°C melted, producing H2O(l) at 0°C. Based on the diagram, which of the following best describes the amount of heat required for this process and the changes that took place at the molecular level?
Heat : 12 kJ, to maintain hydrogen bonds
Further explanationGiven
A 2.00mole sample ⇒ n = 2 mol
H₂O(s) at 0°C melted, producing H₂O(l) at 0°C
Required
the amount of heat required
the changes that took place
Analysis
Conversion of mol to mass
Use formula of Heat :
Q = mLf (melting/freezing)
Lf=latent heat of fusion (for water=334 J/g)
Solution
mass H₂O(MW=18 g/mol) :
[tex]\tt mass=2\times 18=36~g[/tex]
Heat required :
[tex]\tt Q=36\times 334=12024~J\approx 12~kJ[/tex]
The absorbed heat is used to maintain hydrogen bonds in water molecules (there are two hydrogen bonds per molecule)
Paraphrase
The amount of heat required : 12 kJ, and to maintain hydrogen bonds
What type of reaction is this?
Zn + K2 CrO 4 --> K + ZnCro4
A) single replacement
B) double replacement
C) decomposition
D) synthesis
Answer:
a) single replacment........................
Which one has more Thermal Energy? A cup of boiling water or a bathtub of warm water? Explain! Please answer if you can, thank you!! P.S this is science but i just put it as chemistry?
Answer:
See explanation
Explanation:
The thermal energy of a substance is affected both by its mass and by its temperature. Thermal energy is defined as the total kinetic energy of all particles in an object.
Even though the cup of water has a higher temperature, the bathtub has more thermal energy because it contains much more mass of water compared to the cup. It will release more thermal energy to the surroundings compared to the cup of boiling water.
The bathtub of warm water has a higher total thermal energy due to its bigger volume, but the cup of boiling water has a higher average kinetic energy per particle.
The thermal energy of a cup of boiling water is greater than that of a warm bathtub. The sum of all the kinetic energies of the particles in a substance is its thermal energy. The temperature of boiling water is higher than that of warm bathwater. The average kinetic energy of the particles is measured by temperature. The average kinetic energy of the particles in a cup of boiling water would be higher than that of the warm water in a bathtub, which is normally between 38 and 45 degrees Celsius (100 and 113 degrees Fahrenheit), because water has a boiling temperature of 100 degrees Celsius (212 degrees Fahrenheit).
To know more about thermal energy, here:
https://brainly.com/question/3022807
#SPJ6
In the reaction 2AgI + Na2S → Ag2S +2NaI, calculate the number of moles of AgI needed to react with 85.0 g
Answer:
8.5gNaI × 1molNaI/78gNaI × 234.7g AgI / 1 MOL AgI × 2Mol Ag I / 1mol Na2S=51.2 g of AgI reacts with Na2 SExplanation:
conversion factor is used to make sure that all the units cancels with the other units and we only remain with the mass of Ag I which is 51.2g but since the number of moles can be calculated by dividing with the relative molecular mass therefore 51.2g/234.7gmol=0.22mol
ILL MARK BRAINLIEST NEED HELP ASAP
THE OTHER TWO ANSWER CHOICES WERE
20
40
What is another name for a row on the periodic table?
Answer choices :
Group
Period
Family
Transition Metals
Consider the following reaction: 3Fe(s) + 4H₂O(g) ➞ Fe₃O₄(s) + 4H₂(g). To answer the following question: "How many moles of hot water vapor (steam) must react to produce 275 g of Fe₃O₄?" How many steps will it take to get the answer? *
4 points
1
2
3
4
Answer: 2
Explanation:
To calculate the moles :
[tex]\text{Moles of solute}=\frac{\text{given mass}}{\text{Molar Mass}}[/tex]
[tex]\text{Moles of} Fe_3O_4=\frac{275g}{233.5g/mol}=1.18moles[/tex]
[tex]3Fe(s)+4H_2O(g)\rightarrow Fe_3O_4(s)+4H_2(g)[/tex]
According to stoichiometry :
1 mole of [tex]Fe_3O_4[/tex] are produced by = 4 moles of [tex]H_2O[/tex]
Thus 1.18 moles of [tex]Fe_3O_4[/tex] will be produced by=[tex]\frac{4}{1}\times 1.18=4.72moles[/tex] of [tex]H_2O[/tex]
Mass of [tex]H_2O=moles\times {\text {Molar mass}}=4.72moles\times 18g/mol=85.0g[/tex]
Thus 85.0 g of [tex]H_2O[/tex] will be required and 2 steps are required to get the answer.
27. Based on Reference Table S, which of the
following atoms requires the least energy for the
removal of the most loosely bound electron?
A) Br
B) Sr
C) Be
D) Sn
Answer:
This question is incomplete but the correct option is B
Explanation:
This question is incomplete because of the absence of the "Reference Table S", however the question can still be answered in the absence of the table. The energy described in the question is the ionization energy (energy required to remove the most loosely bound electron in an atom). This question seeks to know the atom (from the options provided) with the least ionization energy.
Ionization energy increases from left to right across the period because it's easier to remove a single electron (valence electron) from the outermost shell than to remove two electrons from the same shell; thus the more the valence electrons (in a shell), the higher the ionization energy. Thus, bromine (Br) and tin (Sn) have high ionization energies because they have more number of electrons in there outermost shell.
Berylium (Be) and strontium (Sr) are both in the group 2 of the periodic table because they both have 2 electrons in there outermost shell. Ionization energy decreases down a group. This is because the farther an electron is from the nucleus, the weaker the force of attraction between the nucleus and the electron. Thus, strontium (Sr) would have a lesser ionization energy between the two and would indeed have the least ionization among the options provided. Hence, the correct option is B
Atoms and elements are examples of A. molecules. B. mixtures. C. compounds. D. pure substances.
Answer:
atom are very tiny partical
In mitosis, how does a daughter cell compare with its parent cell?
A.
A daughter cell has twice as many chromosomes as its parent cell.
B.
A daughter cell has half as many chromosomes as its parent cell.
C.
A daughter cell and its parent cell are exact copies of each other.
D.
A daughter cell has no similarity to its parent cell.
Answer: im pretty sure its the last (one daughter cell has no similarity to its parent cell.)
Explanation: bc a daughter cell has 30 and the parent cell would have 46 and thats not twice or half as many and they arent the same either so the last one makes sences
Someone please help will mark as brainliest
1. solute is the substance that is being dissolve,while solvent is dissolving medium
2.saturated is solution that contain maximum amount of solut that capable of being dissolve and supersaturated is solution that contain less amount or medium of solut that capable being dissolve : example vinger
3. is a number placed in front of a chemical symbol or formula. It shows how many atoms or molecules of the substance are involved in the reaction. For example, two molecules of hydrogen would be written as 2 H2, and two molecules of water would be written 2 H2O . yes it's can be change only in caseWhen you balance an equation you can only change the coefficients
at the left.
6.
1. Work equals
A force x distance
B. force - distance
C. force + distance.
The force you apply to a machine
is the
A. input force.
B. output force.
C. efficiency.
2.
The unit of work is the
A. watt.
B. newton.
C. joule.
7.
The efficiency of all real
machines is
A. greater than 100%
B. equal to 100%
C. less than 100%
3.
Power is the amount of
A. work done per unit of time.
B. force on a certain area.
C. pressure in a volume of liquid.
8.
4.
The unit for power is the
A. joule.
B. Meter per second
C. watt.
The fixed point that a lever rotates
around is called the
A. fulcrum.
B. input force.
C. wedge.
9.
5.
A machine cannot change the
A. direction of the input force.
B. amount of work needed to do
A screwdriver is an example of a
simple machine called a
A. pulley.
B. screw
C. wheel and axle.
a task.
C. distance over which a force
is applied
10.
Your front teeth are
A. wedges.
B. levers.
C. compound machines.
Answer:
i know right answer
Explanation:
let me explain
Which process describes the wearing
away of rock?
A. drainage
B. erosion
C. infiltration
D. weathering
Answer:
weathering
Explanation:
hope this helps
Which liquid has the weakest intermolecular forces?
Answer:
Oil- Only London Dispersion Forces (the weakest intermolecular force)
Water- London Dispersion, Dipole-Dipole, and Hydrogen Bonding
What constitutes a solar system?