Why are trees considered natural resources? a. They provide valuable shade that no other resource can provide. b. Humans use them to produce paper, lumber, fuel, and other products. c. They are an important source of firewood for campfires. d. They grow back after they're cut down.​

Answers

Answer 1

Answer:

Explanation:

The correct answer is b. Trees are considered natural resources because humans use them to produce paper, lumber, fuel, and other products. Trees provide a renewable resource that can be harvested and used for a variety of purposes. They also play an important role in the environment by producing oxygen, providing habitats for wildlife, and helping to regulate the climate. While trees can provide valuable shade and be a source of firewood for campfires, these factors alone do not fully explain why they are considered natural resources.


Related Questions

C + O2 = CO2. The __ carbon combines with the ___ oxygen to form the ___ carbon dioxide.

Answers

1,1,1

Explanation:

1 mole of carbon combines with 1 ,mole of oxygen to form 1 mole of carbondioxide

what happens to the frequency of non beneficial traits in the population over time in simple terms?

Answers

The frequency of non-beneficial traits in a population tends to decrease overtime due to natural selection. These traits do not provide any advantage to an organism in its environment, and may even be detrimental to its survival or reproduction.

Organisms with non-beneficial traits may be less likely to survive and reproduce, so their genes are less likely to be passed on to the next generation.

Which part of the body contains bile an enzyme that helps down lipids

Answers

Answer:

liver

Explanation:

The liver produces bile, a solution that helps you digest fats. The gallbladder stores bile. As fatty food enters the upper portion of your small intestine (the duodenum), the gallbladder squeezes bile into the small intestine through the bile ducts.

All of the following are examples of environmental mutagens except

x-rays.

viruses. (Correct)

pesticides.

sunlight.

Answers

All of the following are examples of environmental mutagens except : sunlight as it does not pollute the environment.

What is meant by environmental mutagens?

Agents that can cause mutations in DNA and increase the frequency of mutations in a population is known as environmental mutagens. Examples of environmental mutagens are : x-rays, UV radiation, certain chemicals such as pesticides, and some naturally occurring substances like aflatoxins produced by fungi.

Mutagens are the substances that have the ability to change the genetic composition of a person / animal and these changes caused by mutagens are referred to as genetic mutations. Major target of mutagens is DNA.

To know more about environmental mutagens, refer

https://brainly.com/question/9628269

#SPJ1

Data that is observable and non numerical

Answers

Answer:

Observable and non-numerical data is typically referred to as qualitative data. This type of data can be descriptive or categorical and is often collected through interviews, surveys, or observations. Examples of qualitative data include the color of a flower, the texture of a fabric, or the opinions expressed by individuals in a focus group.

Explanation:

V
4. Population levels fluctuate over time and with changing conditions.
A. What is the definition of carrying capacity? (10 points)
B. What happens when a population exceeds its carrying capacity? (10 points)

Answers

Answer:

A. Carrying capacity refers to the maximum number of individuals of a species that can be supported by a particular environment without degrading the environment's ability to sustain future generations of that species. It is determined by a range of biotic and abiotic factors, such as food availability, water, shelter, predation, disease, and other limiting resources.

B. When a population exceeds its carrying capacity, the environment becomes unable to provide the necessary resources to support the excess individuals, and the population size decreases. This can occur through various mechanisms, such as competition for resources, predation, disease, or migration. As resources become scarce, the population may experience a decline in birth rate, an increase in death rate, or both. This can result in a population crash or die-off, which can have cascading effects on other species and the entire ecosystem. Therefore, it is important for species to stay within their carrying capacity to maintain a sustainable balance with their environment.

Explanation:

can someone please help me, i dont know how to answer this. please give me pointers

Answers

Because, the passage itself describes about the nature of greenhouse effects. The greenhouse gases are absorbed by the soil. In order to protect the sensitive plants, we are going now for the modern greenhouse method i.e. artificial method. Transparent material which is nothing but like a sheet which covers the house is contructed to oppose the greenhouse gases to protect the plants. As the heat passes, some amount of heat won't escapes to atmosphere. This results in excess heat inside and leads the plants to die. Scientists say it's better to be the natural method of greenhouse effects.

PLS HELP I GIVE BRAINLIEST.

As you have learned in this lesson, arthropods are the largest phylum of animals. In this activity, you will need a notebook and a pencil or pen. You will investigate the natural surroundings of a place of your choice and search for critters in the arthropod phylum. Look under logs, rocks, in gardens, and other moist places. Each time you find one, if you know the name of it, write it down in a list. Otherwise, give it a name based upon its descriptive characteristics.

Place a tally mark next to an arthropod every time you find another of its kind, this way you can record how many of the same species you observe. Look in many different mini-habitats so you can find different types of arthropods.
Make careful observations about their body parts, the way they move, and how they respond when they notice your presence.

Answer the following questions:
Where did you find the most arthropods?
Which arthropod was most common in the areas you looked?
Which creatures did you find least often?

Answers

1. I found the most arthropods in a small forested area near a pond. There were so many different types of creatures to observe, it was incredible.
2. The most common arthropod I found was a type of beetle that had a shiny green carapace.
3. They were crawling all over the place! The creatures I found least often were a type of spider that was very small and hard to see. I only found a couple of them hiding under some leaves.

Which of the following is true about photosynthesis?
A.
Chloroplasts release energy from the chemical bonds in sugar.
B. Chloroplasts convert light energy into chemical energy in the form of sugar.
C. Mitochondria convert light energy into chemical energy in the form of sugar.
D. Mitochondria release energy from the chemical bonds in sugar.

Answers

Answer:

B

Explanation:

Mitochondria both deal with cellular respiration, not photosynthesis, meaning that C and D are wrong. and if you look at the photosynthesis equation, it equals glucose = sugar

The provided table shows the properties of four different sample materials. One of these materials is cork, a type of wood that floats on water (density of water = 1.00 g/cm3What is the density of cork in g/cm3Record and bubble in your answer on the answer document.

Answers

The density of cork can vary depending on factors such as its moisture content and the specific type of cork, but a typical range for the density of cork is around 0.24 to 0.32 g/cm3.

What is Density?

Density is a physical property of matter that describes how much mass is contained in a given volume of a substance.

Density = Mass / Volume

The standard unit of density is kilograms per cubic meter (kg/m3) in the International System of Units (SI), but it can also be expressed in grams per cubic centimeter (g/cm3) or other units.

However, based on the information you have provided, cork is a type of wood that floats on water, which means its density is less than that of water. The density of water is 1.00 g/cm3, so the density of cork must be less than 1.00 g/cm3 in order for it to float. In general, the density of cork can vary depending on factors such as its moisture content and the specific type of cork, but a typical range for the density of cork is around 0.24 to 0.32 g/cm3.

Learn more about Density from given link

https://brainly.com/question/1354972

#SPJ1

For the animal pictured in the boxes below, type at least 3 adaptions they have and explain how these adaptions help them survive in their environments

Answers

Answer:

Edmentum sucks

Explanation:

The organisms in a desert biome must have wide feet as as to wade through sand, this is not necessary in a tundra biome.

The term biome refer to a zone of life found on earth. The descriptions of tundra and desert biomes are shown as follows;

A tundra biome is a cold region in which trees are absent and living organisms have to survive under very cold conditions.

A desert biome is covered mostly with sand and has alternating hot and cold conditions in the day and in the night.

The organisms in a desert biome must have wide feet as as to wade through sand. This is not necessary in a tundra biome composed mostly of snow. Also, in a desert biome, organisms have hairy eyes to keep away sand. This is not required in a tundra biome.

Learn more about tundra biome: brainly.com/question/1204226

The stamen, pistil and petals are a part of which living thing?

Answers

Answer:

A flower

Explanation:

1. Index fossils are useful tools for geologists.
A. What information can index fossils tell geologists? (4 points)
B. What are three characteristics of a good index fossil? (6 points)

Answers

Answer:

A. Index fossils are useful tools for geologists because they can provide information about the relative age of rocks and help to correlate rock formations across different locations. By identifying and dating the age of index fossils found in a particular rock layer, geologists can determine the approximate age of the rock layer and its correlation with other rock layers in the region.

B. Three characteristics of a good index fossil are:

Widespread distribution: A good index fossil should have a wide geographic distribution, which means that it should be found in multiple locations around the world. This helps to establish a correlation between different rock layers that contain the same index fossil.

Limited time range: A good index fossil should have a limited time range, meaning that it should have existed for a relatively short period. This allows geologists to narrow down the age range of the rock layer containing the fossil.

Easily recognizable: A good index fossil should be easily recognizable, even in small or fragmented pieces. This allows geologists to quickly identify and date the fossil, even if only a small portion of it is present in the rock layer.

Overall, a good index fossil should be distinctive, easily recognizable, have a wide distribution, and a limited time range, all of which can provide useful information for geologists studying the history of the Earth.

Explanation:

what is the role of a scientist

Answers

To study the different parts of our planet and existence on earth and come up with theories on why its all here. Eg Why were all on earth and whats outside of what we have already found out. They try to come up with explanations on why everything exists. :)

Extraction of lipids from a tissue sample requires organic solvent because ________.

Answers

As organic solvents are readily available, they must be used for the extraction of lipids from tissue samples. Lipids are hydrophobic and can only be dissolved in organic solvents, which are inexpensive and keep the temperature low and controlled.

What is meant by organic solvents?The ability to dissolve or disperse one or more other compounds makes organic solvents a carbon-based chemical. Organic solvents may be neurotoxic, reproductively unsafe, and carcinogenic. Benzene, carbon tetrachloride, and trichloroethylene are examples of organic solvents that are carcinogenic. A few of the often used solvents are acetone, ethyl acetate, hexane, heptane, dichloromethane, methanol, ethanol, tetrahydrofuran, acetonitrile, dimethylformamide, toluene, and dimethylsulfoxide, among others. It is all natural. It is composed of the organic substance acetic acid. Yet, only 5% of vinegar is acetic acid; the remaining 95% is inorganic water. Rubing alcohol's main ingredient, isopropyl alcohol (isopropanol), which is frequently used as an organic solvent, can also be abused for intoxication purposes.

To learn more anout organic solvent, refer to:

https://brainly.com/question/30716068

Anyone know how to solve this? It's biotechnology haha.

Answers

Based on the gel results, patient A has lower levels of the protein corresponding to standard IV in their blood.

The protein that is different in patient B is the one corresponding to the band that did not match with any of the standards. The fact that the band on the gel for patient B was smaller in size compared to the control band suggests that the protein is of smaller molecular weight than the standard.

What is the significance of the results of the protein levels for patients  A and B?

Since these are essential blood proteins, the difference in protein levels for both patients may have implications for their health.

For patient A, lower levels of the protein corresponding to standard IV may indicate a potential health issue related to the function of that protein.

For patient B, the difference in the size of the protein may indicate a mutation or alteration in the gene responsible for encoding that protein, which could lead to a functional difference or potential health issue. Further testing and analysis would be needed to determine the specific implications for each patient.

Learn more about protein levels at: https://brainly.com/question/29520808

#SPJ1

The volume of Uranus is less than one-tenth of the volume of Saturn.
(the subject does not so the science I needed so I just put biology)

Answers

The volume of Uranus is less than one-tenth of the volume of Saturn. This assertion is accurate.

What are the distinctions between Saturn and Uranus?

Despite having a smaller mass, Uranus has a slightly larger diameter than its neighbor, Neptune. Saturn is the least dense planet, making it the second least dense after that. The methane gas in Uranus' atmosphere gives the planet its bluish-green hue. The cloud tops of Uranus reflect sunlight back out of the atmosphere as it passes through them.

How similar are Saturn and Uranus?

Similarities Between Saturn and Uranus: The atmospheres of both planets are primarily made of hydrogen and helium. Each planet revolves around the Sun. Both have a core that is hotter. They both have several moons.

To learn more about volume of planets visit:

brainly.com/question/16357823

#SPJ1

Which best explains how photosynthesis is helpful to humans?
Group of answer choices

It produces proteins, which humans can eat.

It provides oxygen for humans to breathe.

It increases the levels of carbon dioxide in the air.

It reduces the amount of harmful rays released by the sun.

Answers

It provides oxygen for humans to breath.

ACADEMIC STUDY ON NATURAL SELECTION, THIS IS NOT A TEST!!!

Answers

Answer is A. Wild population

Quadrat Quality

1. Draw Conclusions A classmate says that this is his one and only quadrat sample for a study of the grasshopper population in a 20-acre meadow. List the flaws in his sampling methods.

Answers

The flaws in your classmate's sampling method include:

Small Sample SizeUnrepresentative Sampling LocationLimited Sampling FrequencyLack of StandardizationLack of ReplicationBias toward visible grasshoppers

What is quadrat sampling?

Quadrat sampling is a technique for immediately counting the number of organisms in a portion (or sample) of the habitat. It is used to calculate population density, frequency, and dispersion estimates.

Quadrat positions may be selected at random or along a transect.

Learn more about quadrat sampling at: https://brainly.com/question/18065135

#SPJ1

A plane is traveling 800 kph west. If the forces of lift, weight, thrust, and drag upon are in equilibrium for the whole time of the flight, what will the velocity of that plane be after three hours?

Answers

Answer is : 266.67

Explanation:
800kn=v • 3
V= 800km / 3
V= 266.67

8. Which process charges metamorphic rock into sedimentary ro
9. Metamorphism inches the addition of
and
to pre-existing rocks,
10. Compaction & cementation of sedmerks/forms
11. Subiecting sedimentary rocks to extreme heat & pressure forms
12. Sdfiction of molten materials forms
tocks
13. Deposition and burial of sediments forms
14, Deposited sediments may be partides of which types of rock
15. Hest & Pressure acting on igneous rocks forms
16. Solid magma forms
17.
In order to form magma, what must happen to sedimentary,
metamorphic or igneous rocks?
18. For weathering & erosion to ocour, what process will the rock
usually go through first or at the same time?

Answers

Answer:

Metamorphism does not charge metamorphic rock into sedimentary rock. Metamorphic rocks are formed from pre-existing rocks through heat and pressure, while sedimentary rocks are formed from the accumulation of sediment.

Compaction and cementation of sediments forms sedimentary rock.

Subjecting sedimentary rocks to extreme heat and pressure can form metamorphic rocks.

Solidification of molten materials forms igneous rocks.

Deposition and burial of sediments can form sedimentary rocks.

Deposited sediments may be particles of various types of rock, including igneous, metamorphic, or other sedimentary rocks.

Heat and pressure acting on igneous rocks can form metamorphic rocks.

Solidification of magma can form igneous rocks.

In order to form magma, rocks must be subjected to high temperatures and pressures, typically through the process of melting in the Earth's mantle.

For weathering and erosion to occur, the rock will usually undergo physical or chemical breakdown first, which can be caused by exposure to water, wind, or other environmental factors. This can lead to the formation of sediment that can be transported and deposited elsewhere, eventually forming sedimentary rock.

Explanation:

If having 8 repeats at loci 1 is found in 10 % of the US population, having 12 repeats at loci 2 is found in 5% of the US population, having 7 repeats at loci 3 is found in 10% of the US population, and having 5 repeats at loci 4 is found in 30% of the US population, if the US has a population of 300 million people, how many people in the US would have this DNA profile at those 4 loci?

Answers

This is an astronomically large number and suggests that it is highly unlikely for any two individuals to have the same DNA profile at these four loci.

What is DNA?

DNA (Deoxyribonucleic acid) is a long, complex molecule that contains the genetic instructions used in the development and function of all known living organisms and many viruses. It is often described as the "blueprint" or "code" of life. DNA is composed of four types of nucleotides, which are the building blocks of the DNA molecule. Each nucleotide contains a sugar molecule, a phosphate group, and a nitrogenous base (adenine, thymine, guanine, or cytosine). The sequence of these bases along the DNA molecule determines the genetic information it carries.

Here,

To determine the number of individuals in the US population that have a specific DNA profile at these four loci, we need to multiply the percentage of individuals with each genotype at each loci. Let's start by finding the number of individuals in the US population who have 8 repeats at loci 1. We know that 10% of the US population has this genotype, so:

Number of individuals with 8 repeats at loci 1 = 10% of 300 million

= 0.1 x 300,000,000

= 30,000,000

Similarly, we can find the number of individuals with 12 repeats at loci 2:

Number of individuals with 12 repeats at loci 2 = 5% of 300 million

= 0.05 x 300,000,000

= 15,000,000

For loci 3:

Number of individuals with 7 repeats at loci 3 = 10% of 300 million

= 0.1 x 300,000,000

= 30,000,000

And finally, for loci 4:

Number of individuals with 5 repeats at loci 4 = 30% of 300 million

= 0.3 x 300,000,000

= 90,000,000

To find the number of individuals with all four of these genotypes, we need to multiply these four values:

Number of individuals with all four genotypes = 30,000,000 x 15,000,000 x 30,000,000 x 90,000,000

= 3.87 x 10²⁵

This is an astronomically large number and suggests that it is highly unlikely for any two individuals to have the same DNA profile at these four loci. In practice, forensic DNA profiling typically looks at many more loci to increase the uniqueness of the DNA profile.

To know more about DNA,

https://brainly.com/question/30396067

#SPJ9

Describe the events in excitation contraction coupling

Answers

Answer:

cardiac contraction-excitation The sequence of occurrences, from the generation of an electrical impulse to the contraction of cardiac muscles, is referred to as coupling. This procedure is essential because it enables the heart to beat in a regulated manner without requiring conscious effort. With the help of EC coupling, the cardiac muscles sequentially contract, allowing blood to be pumped between 60 and 100 times per minute, first to the lungs and subsequently the rest of the body.

Explanation:

What model of psychology represents a popular attempt at integration

Answers

Answer:

The model of psychology that represents a popular attempt at integration is the biopsychosocial model. This model proposes that psychological and behavioral factors are influenced by biological, psychological, and social factors, and that all of these factors interact with each other to shape human behavior and mental processes. It emphasizes the importance of understanding the interplay between biological, psychological, and social factors in order to develop a comprehensive understanding of mental health and illness. This model has gained popularity in recent years as a more holistic approach to psychology that integrates multiple perspectives and areas of study.

Explanation:

1 2 3 a) Supply a suitable caption for this diagram b) Give labels of the parts numbered 1, 2, and 3. c) What process takes place in these structures? d) How are these structures mentioned in question 2(a), adapted to fulfill their functions? e) Where else in the body does the process take place?​

Answers

The caption for the diagram is the respiratory system

The parts labeled 1, 2, and 3 are:

bronchiolealveolialveolar sac

What are the adaptations of the bronchiole, alveoli, and alveolar sac to their functions?

The bronchioles, alveoli, and alveolar sacs are all structures within the respiratory system that are adapted to their specific functions:

Bronchioles: The bronchioles are small, branching tubes that lead from the larger bronchi to the alveoli. They have smooth muscle fibers that can contract or relax to adjust the airflow, ensuring that air is directed to where it is needed in the lungs.

Alveoli: The alveoli are small, thin-walled sacs at the end of the bronchioles where gas exchange takes place. They have a large surface area, which is achieved through the presence of many tiny air sacs. This maximizes the amount of gas exchange that can occur.

Alveolar sacs: The alveolar sacs are clusters of alveoli that are responsible for the majority of gas exchange in the lungs. They have a shape that allows them to accommodate a large volume of air, maximizing the amount of gas exchange that can occur.

Learn more about alveoli at: https://brainly.com/question/11720309

Question 8 (2 points)
What describes the unusually large release of plasma from the sun's corona? (2 points)
O a
Ob
Oc
Od
Aurora
CME
Solar flare
Solar wind
Question 9 (2 points)

Answers

The unusually large release of plasma from the sun's corona is described as a CME (coronal mass ejection).

What is CME (coronal mass ejection)?

A coronal mass ejection (CME) is a massive burst of solar wind and magnetic fields that are ejected from the sun's corona into space. These eruptions can release billions of tons of charged particles and plasma at speeds of several million miles per hour. When a CME collides with the Earth's magnetic field, it can cause geomagnetic storms, auroras, and other disruptions to our planet's space environment. CMEs can also have significant impacts on satellite and communication systems, as well as on power grids on the ground.

What is plasma?

plasma refers to the highly ionized gas consisting of a mixture of positively charged ions, negatively charged electrons, and neutral particles that are released from the sun's corona during a coronal mass ejection (CME).

To know more about CME, visit:

https://brainly.com/question/16524443

#SPJ1

Below, a pre-mRNA is shown and the complete, edited mRNA is shown. a) in the complete mRNA, use a green pen or highlighter to highlight the methyl G cap. b) In the complete mRNA, use a red pen or highlighter to highlight the poly A tail. c) In both the pre-mRNA and complete mRNA, highlight each exon with diffeent colors, to show the pieces of pre m-RNA that are in both. Heres the pre-mRNA: AUGAACCCGGGACGCGCGAUGCCCUAUU. Heres the complete edited mRNA: GAUGAACCGCGCGAUAUUAAAAAAAAAAAAAAAA

Answers

a)Highlight the first nucleotide in green. b) Highlight the last several nucleotides (usually around 100-300 A nucleotides) in red. c) Three exons in pre-mRNA: "AUG", "ACCCGGGACGCGCGA", and "UGCCC".

What is mRNA?

Messenger ribonucleic acid is single-stranded molecule of RNA that corresponds to genetic sequence of gene.

a) Methyl G cap is added to the 5' end of the mRNA, so in the complete mRNA sequence "GAUGAACCGCGCGAUAUUAAAAAAAAAAAAAAAA",  first nucleotide is methylated guanine (methyl G) cap. Highlight the first nucleotide in green.

b) The poly A tail is added to the 3' end of mRNA, so in complete mRNA sequence "GAUGAACCGCGCGAUAUUAAAAAAAAAAAAAAAA", last several nucleotides are all adenine (A) nucleotides that make up the poly A tail. Highlight the last several nucleotides (usually around 100-300 A nucleotides) in red.

c) Exons are coding sequences of a gene that are kept and joined together after splicing, while introns are non-coding sequences that are removed. Based on given sequences, we can identify three exons in the pre-mRNA: "AUG", "ACCCGGGACGCGCGA", and "UGCCC". In complete mRNA, these three exons are joined together, and intron sequence "CUAUU" is removed.

To highlight exons, we can use three different colors. Let's use blue for  first exon "AUG", orange for second exon "ACCCGGGACGCGCGA", and pink for third exon "UGCCC".

In pre-mRNA: AUGAACCCGGGACGCGCGAUGCCCUAUU

Highlighted with different colors for exons:

AUGAACCCGGGACGCGCGAUGCCCUAUU

^^^^ blue ^^ orange ^^^^ pink ^^^^

In complete mRNA: GAUGAACCGCGCGAUAUUAAAAAAAAAAAAAAAA

Highlighted with different colors for exons:

GAUGAACCGCGCGAUAUUAAAAAAAAAAAAAAAA

^^^^ blue ^^ orange ^^^^ pink ^^^^

To know more about mRNA, refer

https://brainly.com/question/24885193

#SPJ1

Dr Lee has asked you to describe the diagnosis and risk factors of the disease to the patient. What would you tell Shino about her diagnosis

Answers

High 24-hour urine calcium levels and low vitamin D levels suggest that Shino's body is not absorbing the calcium needed to maintain bone mass. She also has a bone density scan score of -3 which is indicative of an osteoporosis diagnosis.

A scientist collected the following data on algal growth during an experiment: Algal Growth Rates Water Temperature (°C) Time for population to double (hours) 10 69 15 58 20 36 25 44 30 52 35 71 40 78 Which of the following conclusions could be drawn from the data? A. Algae multiply most rapidly at 20°C. B. Algae multiply most slowly at 20°C. C. Algae multiply most slowly at 10°C. D. Algae multiply most rapidly at 35°C.

Answers

Based on the data provided, the conclusion that could be drawn is that algae multiply most rapidly at 35°C.

option D

What conclusions could be drawn from the data?

Looking at the data, we can see that the time for the population to double decreases as the temperature increases up until 40°C, where it reaches the lowest value of 36 hours. At 10°C, the time for population to double is 69 hours, which is the longest time of all the temperatures tested.

Therefore, we can eliminate options A and C as they suggest the opposite of what is observed in the data. Option B suggests that algae multiply most slowly at 20°C, but the data shows that algae multiply faster at this temperature than at 10°C, 25°C, and 30°C. Option D suggests that algae multiply most rapidly at 35°C.

Hence, the correct answer is that algae multiply most rapidly at 35°C.

Learn more about algae here: https://brainly.com/question/800121

#SPJ1

Other Questions
What is 3 divided by the difference of 4 and a number 14. About the quote on page 239 You can live life as a gosht or you can dance. What does this quote mean to you? REFUGEE NOVEL You have been working as a futures trader at Deutsche Bank, New York. You have collected the following information on Lean Hog. The standard deviation of monthly changes in the spot price of Lean Hog Futures is (in cents per pound) 6. The standard deviation of monthly changes in the futures price of Lean Hog Futures the closest contract is 8. The correlation between the futures price changes and the spot price changes is 0.8. It is now December 17, 2019. Your client, a pig farmer, is committed to selling 800,000 pounds of lean hog on January 15. Your client wants to use February Lean Hog futures contracts to hedge its risk. Each contract is for the delivery of 80,000 pounds of cattle.a. What is the optimal hedge ratio?[x] (sample answer: 0.75)b. Should the pork producer take a long or short hedge?[y](sample answer:Long; or Short)c. How many contracts of lean hog futures does your client need to take to hedge the risk? [z] (sample answer: 7 Contracts) The equivalent expression Create 5 realistic scenarios of what ifs Three reasons why grade 11s could experience positive changes within friendships due to their renewed focus on academics Respond to the following based on your reading.How does the valence of an element relate to its chemical activity?Identify the statements below as belonging to one of these laws: law of conservation of matter, law of conversation of energy, or law of definite proportions.Energy can be neither created nor destroyed by chemical means but can be changed from one form to another.The composition of a chemical compound never varies.Matter can be neither created nor destroyed by chemical means but can be changed from one form to another.How was the Periodic Table of Elements developed and how are the elements arranged on it?Using the Periodic Table of Elements, fill in the chart below to identify and describe the properties of the noble gases.Element Name Group Number Period Number Valence Properties/Reactivity UsesUsing the Periodic Table of Elements, fill in the chart below to identify and describe the properties of the halogens.Element Name Group Number Period Number Valence Properties/Reactivity UsesUsing the Periodic Table of Elements, fill in the chart below to identify and describe the properties of the nonmetals.Element Name Group Number Period Number Valence Properties/Reactivity UsesDescribe the unique properties of water. Be sure to include an explanation of the filtration systems we use to keep water safe for drinking.What is the Earths atmosphere composed of, and why is it important? How can the area of this triangle be determined by forming arectangle?Select from the drop-down menus to correctly complete thestatementsCopy and rotate the triangle and place it next to the existingtriangle to form a rectangle. The length of the rectangle isChoose.units. The width of the rectangle isChoose.units. The area of the rectangle ISNChoose..square unitsThe area of the triangle is half the area of the rectangle, so thearea of the triangle is Choose.square units. A furniture maker used 7/8 of a can of paint to paint some chairs. He used 1/8 of a can of paint for each chair. How many chairs did he paint? the sheet is a series of arcs of radius 10cm,each arc subtending 120 at it's centre. if there are 14 such arcs in one sheet, how wide would the sheet be if flattened out a. Two charged parallel plates are 4.0 cm apart and have a uniform electric field of 750 V /m between them. What is the potential difference between the plates?b. How much work is necessary to move a +7.0 mC charge from the positive plate to the negative plate! Consider a titration of 20.00mL of 0.7698M butanoic acid (HA, monoprotic acid, Ka=1.52x10^-5) with 14.34 mL of 0.8322M KOH. What is the pH of this solution? who would make the most money in one week? a sales manager work ing 35 hours $28.75x35= $1006.25 or a head mechanic working 25 hours=$938.00 or an assistant mechanic working 30 hours 30.42x30 hours=$912.60 or a front desk clerk working 40 hours a week $15.09 an hour high school level answer, please T/F. The following sentence effectively uses a stylistic device to de-emphasize the bad news: Although we don't have any available positions at this time, we were pleased to receive your application and will keep it on file for six months. Question 2 of 17 How do the processes of weathering, erosion, and deposition help explain the uneven distribution of soil shown in this image?PassageThe soil in this valley is distributed unevenly. Most of it isfound in the lowest part of the valley. Standards by which to judge the reliability marketing research include thea questionnaire constructionb. sampling methodc code of conductd. analytic softwaree. single-source datadeveloped by the American Marketing Association to promote ethical research. irst, find the terms of the missing factor. 25 Now, write 125x-50y in factored form. A town is designing a rectangular park that will be 600 feet wide by 1000 feet long. On a scale drawing, the dimensions of the park are 12 inches wide by 20 inches long. A rectangular area of the park for swing sets is 0.5 inch wide by 2 inches long on the scale drawing.What is the actual length of the swing set area of the park?Enter your answer in the box.The actual length of the swing set area of the park is ______ feet. On a hot summer day, a young girl swings on a rope above the local swimming hole. When she lets go of the rope her initial velocity is 2.25m/s at an angle of 35 above the horizontal. If she is in flight for 1.20s, how high above the water was she when she let go of the rope?