Which will require more heat, increasing the temperature of 1 mol of C8H18(l) by a certain amount or increasing the temperature of 1 mol of H2O(l) by the same amount?

Answer:

12 π electrons.

Explanation:

The structure of adenine can be seen below.

From the diagram, the total number of electrons in adenine is 70 electrons where 20 of them are core electrons.

Also from this same structure, we will notice that we have a total number of  12 π electrons.

i.e.

Each one of these five atoms described takes part in the π electron. These are N-1, N-3, N-7 which comprise of 2σ bonds, and also each of three N contributes one π electron.

Similarly, N-9 and N-10 contain 3σ bonds; Hence, each of them donates two electrons.

Thus;

5C = 5π electrons

3N = 3π electrons

2N = 4π electrons

     = 12π electrons

Answer:

a. PbSO4, Ksp = 1.7x10^-8.

Explanation:

Hello!

In this case, since the solubility product indicates how likely a solid is able to ionize and consequently dissolve in water, we can infer that the larger the solubility product Ksp, the more ions are able dissolve in water; therefore the proper answer goes with the largest Ksp, which is a. PbSO4, Ksp = 1.7x10^-8 since the power goes closer to 1 than the other options.

Best regards!

Answer:

geruow0irghvn3p0unhie0ghik

Explanation:

Since the forces equal to 0, it's balanced because the object isn't moving.

Answer:

[tex]r_{NOCl}=9.28x10^{-2}M[/tex]

Explanation:

Hello!

In this case, given the balanced chemical reaction:

[tex]2 NO(g) + Cl_2(g) \rightarrow 2 NOCl(g)[/tex]

Since there is 1:2 mole ratio between chlorine and NOCl, based on the rate proportions, we can write:

[tex]\frac{1}{-1}r_{Cl_2} =\frac{1}{2}r_{NOCl}[/tex]

It means that for the formation of NOCl, we obtain:

[tex]r_{NOCl}=\frac{2}{-1}r_{Cl_2} \\\\r_{NOCl}=\frac{2}{-1}(-4.64x10^{-2}M)\\\\r_{NOCl}=9.28x10^{-2}M[/tex]

Notice that chlorine is disappearing, which means its rate is negate.

Best regards!

Answer:

0.0023 cm

Explanation:

The following data were obtained from the question:

Length (L) = 55 cm

Breadth (B) = 23.3 cm

Volume (V) = 2.9 cm³

Thickness (T) =?

Thus, we can obtain the thickness of the aluminum foil as illustrated below:

V = L × B × T

2.9 = 55 × 23.3 × T

2.9 = 1281.5 × T

Divide both side by 1281.5

T = 2.9/1281.5

T = 0.0023 cm

Therefore, the thickness of the aluminum foil is 0.0023 cm

Answer:

309 K

Explanation:

Step 1: Convert the pressure to atm

We will use the conversion factor 1 atm = 760 mmHg.

732 mmHg × 1 atm/760 mmHg = 0.963 atm

Step 2: Calculate the moles (n) of the ideal gas

We will use the ideal gas equation.

P × V = n × R × T

n = P × V/R × T

n = 0.963 atm × 8.4 L/0.0821 atm.L/mol.K × 298 K

n = 0.33 mol

Step 3: Calculate the temperature change

We will use the following expression.

Q = n × Cp × ΔT

ΔT = Q/n × Cp

ΔT = 75 J/0.33 mol × 20.79 J/mol.K

ΔT = 11 K

Step 4: Calculate the final temperature

T = 298 K + 11 K = 309 K

Answer:

C. The wavelength decreases

Explanation:

This is because frequency is how often the wave hits the top (peak) and the bottom (through). The more it hits the less wavelength it will have because it is moving faster and has more energy.

Answer:

goes deep into the ground and pollutes the groundwater.

Answer:

100 thousand million stars

Explanation:

Answer:

100 to 400 billion stars

Answer:

He won 32 games.

Explanation:

Another way of expressing 75% is 75/100.

To calculate how many games the baseball pitcher won, we multiply the total of games played (43, in this case) by the percent won:

43 * 75/100 = 32.25 ≅ 32

So the baseball pitcher won 32 games.

The mass of 16.6 × 10²³ molecules of barium nitrate is 718.7g

Learn more at: https://brainly.com/question/15743584?referrer=searchResults

Answer:

its DDDDDDDDDDDDDDDDDD

The structure that is least likely to exist is HS.

Sulfur is an element in group 16. Sulfur is a divalent element that has two lone pairs of electrons. This means that sulfur forms compounds in which it is bonded to two atoms or groups.

All the molecules listed can exist because they consists of structures in which sulfur is bonded to two atoms or groups. The only structure that can not exist is HS because it does not satisfy the valency of sulfur.

Learn more: https://brainly.com/question/25249351

Answer:

it's 200 mph fast........

Answer:

B. because if it was to change so would the amount of wieght that gravity puts on us.

Explanation:

A. might seem right but it's not 35,000 under seal level is the OPPOSITE of 35,000 above sea level.

C. water pressure can change where you are at because of the speed or the type of body of water.

D. it does not make any sense.

hope this helps!!!

Answer:

Water is heated as it travels through flat, glazed panels known as solar collectors, which are normally situated on the roof of the building. The heated water is then stored in an insulated storage tank.

Answer:

answer d is correct that works

The atomic radius trend on the Periodic Table is as follows:

- Atomic radius increases down a column (or group)

- Atomic radius decreases across rows (or periods) from left to right

Looking at my Periodic Table, calcium, chromium, cobalt and copper are in that order from left to right in the same period, which simplifies things significantly.

Since these elements are in the same period, and given that we know atomic radius decreases across periods from left to right, we can see that calcium has the largest atomic radius.

Answer:

d combustion because iron and oxegen need eachother

Answer:

The Correct answer would be Oxidation.

Explanation:

Answer:

NaClO; the contained elements ae Na, Cl, O.

Answer:

a. 167 mL b. 39.27 %

Explanation:

a. From the chemical equation. 2 mole of Al reacts with 3 mole H₂SO₄ to produce 1 mol  Al₂(SO₄)₃.

Now, we calculate the number of moles of Al in 45.0 g Al.

We know number of moles, n = m/M where m = mass of Al = 45.0 g and M = molar mass of Al = 26.98 g/mol.

So n = 45.0 g/26.98 g/mol = 1.668 mol

Since 2 mole of Al reacts with 3 mole H₂SO₄, then 1.668 mole of Al reacts with x mole H₂SO₄. So, x = 3 × 1.668/2 mol = 2.5 mol

So, we have 2.5 mol H₂SO₄.

Now number of moles of H₂SO₄, n = CV where C = concentration of H₂SO₄ = 15.0 M = 15.0 mol/L and V = volume of H₂SO₄.

V = n/C

= 2.5 mol/15.0 mol/L

= 0.167 L

= 167 mL of 15.0 M H₂SO₄ reacts with 45.0 g Al to produce aluminum sulfate.

b. From the chemical reaction, 2 mol Al produces 1 mol Al₂(SO₄)₃

Therefore 1.668 mol Al will produce x mol  Al₂(SO₄)₃. So, x = 1 mol × 1.668 mol/2 mol = 0.834 mol

So, we need to find the mass of 0.834 mol  Al₂(SO₄)₃. Now molar mass  Al₂(SO₄)₃ = 2 × 26.98 g/mol + 3 × 32 g/mol + 4 × 3 × 16 g/mol = 53.96 g/mol + 96 g/mol + 192 g/mol = 341.96 g/mol.

Also number of moles of  Al₂(SO₄)₃, n = mass of  Al₂(SO₄)₃,m/molar mass  Al₂(SO₄)₃, M

n =m/M

So, m = nM = 0.834 mol × 341.96 g/mol = 285.2 g

% yield = Actual yield/theoretical yield × 100 %

Actual yield = 112 g, /theoretical yield = 285.2 g

So, % yield = 112 g/285.2 g × 100 %

= 0.3927 × 100 %

=  39.27 %

The volume (mL) of 15.0 M sulfuric acid needed to react with 45.0 g of aluminum is 166mL and % yield of the reaction is 39.46%.

Moles of any substance will be calculated by using the below formula as:
n = W/M, where

W = given mass

M = molar mass

Given chemical reaction is :

2Al(s) + 3H₂SO₄(aq) → Al₂(SO₄)₃(aq) + 3H₂(g)

Moles of 45g of Al will be calculated as:

n = 45g / 27g/mol = 1.66 mole

From the stoichiometry of the reaction, it is clear that:

1.66 moles of Al = react with 3/2×1.66=2.49 moles of H₂SO₄

By using the formula of molarity we can calculate the volume of H₂SO₄ as:

M = n/V

V = (2.49) / (15) = 0.166L = 166mL

Again from the stoichiometry it is clear that:
1.66 moles of Al = produces 1/2×1.66= 0.83 moles of Al₂(SO₄)₃

Mass of 0.83 moles of Al₂(SO₄)₃ = (0.83mol)(341.96g/mol) = 283.82 g

Given actual yield of Al₂(SO₄)₃ = 112g

% yield will be calculated as:

Percent yield = (Actual yield/Theoretical yield) × 100

% yield = (112/283.82) × 100 = 39.46%

Hence required values are discussed above.

To know more about percent yield, visit the below link:

https://brainly.com/question/8638404

a. molality-m=1.623

b. molarity-M=0.3

a. Boiling point

[tex]\tt \Delta Tb=Kb\times m[/tex]

Kb for ethanol=1.22 °C/m

Boiling point for ethanol = 78.4 °C

ΔTb=80.38-78.4=1.98

[tex]\tt 1.98=1.22\times m\\\\m=\dfrac{1.98}{1.22}=1.623[/tex]

b. osmotic pressure

[tex]\tt \pi =MRT[/tex]

π = 7.65 atm

R = 0.08205 L/atm K

T = 37 + 273 = 310 K

[tex]\tt M=\dfrac{\pi}{RT}=\dfrac{7.65}{0.08205\times 310}=0.3~M[/tex]

Orange is the color of Sodium

Explanation:

The energy released due to breakage of bond or we can say that protons and electrons go from a structure of higher potential energy to lower potential energy. During this change, potential energy is converted to kinetic energy in form of heat.

Generally chemical potential energy is accessed in form heat, which the difference between the potential energies of reactant and product.

Answer:

The temperature is on the y-axis and the time is on the x-axis.

Explanation:

Which statement describes how phase changes can be diagrammed as a substance is heated? (D is the answer)

The phase is on the y-axis and the temperature is on the x-axis.

The temperature is on the y-axis and the phase is on the x-axis.

The time is on the y-axis and the temperature is on the x-axis.

The temperature is on the y-axis and the time is on the x-axis.

Which statement describes the appearance of a temperature-vs.-time graph? (C is the answer)

A horizontal line shows that the temperature increases at a constant rate over time.

A vertical line shows that the temperature decreases at a constant rate over time.

Horizontal lines where the temperature is constant during phase changes connect upward-sloping lines where the temperature increases.

Horizontal lines where the temperature increases are connected by upward-sloping lines where the temperature is constant for each phase.

Explanation:

Answer:

a. 122.6 mL / pH = 4.03

b. 193.6 mL / pH = 5.73

Explanation:

In the equivalence point we know: mmoles acid = mmoles base- And the pH in a titration between a weak base and a strong base, is acid, at the equivalence point. For the volume, we can replace the equation with the data given.

a. 0.125M . volume of acid = 65.5 mL . 0.234M

Volume of acid = (65.5 . 0.234) / 0.125 = 122.6 mL

Total volume at the equivalence point = 188.1 mL

b. 0.125M . volume of acid = 21.8 mL . 1.11 M

Volume of acid = (21.8 .  1.11) / 0.125 = 193.6 mL

Let's calculate the pH. In the equilavence point we have a neutralization reaction.

a. NH₃ + HCl → NH₄Cl

All the mmoles of protons (65.5 mL . 0.234M) react to ammonia, to obtain ammonium.

New concentration is: 15.32 mmoles / 188.1 mL = 0.0814 M

This is the [NH₄⁺] to determine the pH in the acid base equilibrium.

NH₄⁺  +  H₂O  ⇄  NH₃  +  H₃O⁺      Ka

Expression for Ka = [NH₃]  . [H₃O⁺] / [NH₄⁺]

5.6×10⁻¹⁰ = x² / (15.32 - x)

(We can avoid the quadratic equation 'cause Ka is so small)

√(5.6×10⁻¹⁰ . 15.32) = x → [H₃O⁺] = 9.26×10⁻⁵

pH = - log [H₃O⁺] → 4.03

b. CH₃NH₂ + HCl → CH₃NH₃Cl

All the mmoles of protons (21.8 mL . 1.11M) react to methylamine, to obtain methylammonium.

New concentration is: 24.2 mmoles / 193.6 mL = 0.125 M

This is the [CH₃NH₃⁺] to determine the pH in the acid base equilibrium.

CH₃NH₃⁺  +  H₂O  ⇄  CH₃NH₂  +  H₃O⁺      Ka

Expression for Ka = [CH₃NH₂]  . [H₃O⁺] / [CH₃NH₃⁺]

2.7×10⁻¹¹ = x² / (0.125 - x)

(We can avoid the quadratic equation 'cause Ka is so small)

√(2.7×10⁻¹¹ . 0.125) = x → [H₃O⁺] = 1.84×10⁻⁶

pH = - log [H₃O⁺] → 5.73

The pH of the equivalence point of 0.125M HCl with NH₃ is 4.03 and with CH₃NH₂ is 5.73.

In the acid - base titration, at the equivalence point equal moles of acid as well as of base are present.

First we calculate the volume of HCl by using the below equation as:

M₁ = molarity of NH₃ = 0.234 M

V₁ = volume of NH₃ = 65.5 mL

M₂ = molarity of HCl = 0.125 M

V₂ = volume of HCl = ?

V₂ =  (65.5 . 0.234) / 0.125 = 122.6 mL

Total volume at the equivalence point = 188.1 mL

Chemical reacion will be written as:

NH₃ + HCl → NH₄Cl

All moles of protons react with moles of ammonia, so new moles (n) will be calculated as:

n = molarity × volume

n = 65.5 mL × 0.234M = 15.32 moles

Now, concentration in terms of molarity will be 15.32 mmoles / 188.1 mL = 0.0814 M

pH in the acid-base reaction due to [NH₄⁺], as:

NH₄⁺  +  H₂O  ⇄  NH₃  +  H₃O⁺

Value of Ka for this reaction is = 5.6×10⁻¹⁰

According to the ICE table, Ka equation will be written as-

5.6×10⁻¹⁰ = x² / (15.32 - x)

x = [H₃O⁺] = 9.26 × 10⁻⁵

pH = - log [H₃O⁺] = 4.03

0.125M . volume of acid = 21.8 mL . 1.11 M

Volume of acid = (21.8 .  1.11) / 0.125 = 193.6 mL

Total volume at the equivalence point = 215.4 mL

Chemical reacion will be written as:

CH₃NH₂ + HCl → CH₃NH₃Cl

All moles of protons react with moles of ammonia, so new moles (n) will be calculated as:

n = 21.8 mL . 1.11M = 24.2 moles

Now, concentration in terms of molarity will be 24.2 moles / 215.4 mL = 0.11M

pH in the acid-base reaction due to [CH₃NH₃⁺], as:

CH₃NH₃⁺  +  H₂O  ⇄  CH₃NH₂  +  H₃O⁺

Value of Ka = 2.7×10⁻¹¹

According to the ICE table, Ka equation will be written as-

2.7×10⁻¹¹ = x² / (0.11 - x)

x = [H₃O⁺] = 5.4×10⁻⁶

pH = - log [H₃O⁺] = 5.73

Hence the value of pH will be 4.03 and 5.73 respectively.

To know more about equivalence point, visit the below link:

https://brainly.com/question/24584140

There is a golden role of solubility, polar solute dissolve in polar solvent and non polar solute dissolve in non polar solvent. Therefore, the correct option is option B that is Salt and water.

Solutions are a homogeneous mixture of two or more substances. A solution is a homogeneous mixture of solvent and solute molecules. Solvent is a substance that is in large amount in solution. solute is the substance which is in small amount in a solution. There are two types of mixture that is homogeneous and heterogeneous. Solution is a homogeneous solution.

Salt and water because salt is transparent and will dissolve into the water among given solute, salt NaCl is a polar solute which will dissolve in polar solvent that is water.

Therefore, the correct option is option B that is Salt and water.

To know more about solution, here:

https://brainly.com/question/13812915

#SPJ2