Answer:
A: Air pressure decreases as air density increases
Explanation:
Pressure is a force exerted on or against an object by being in contact with a substance. Thus, air pressure is due to the bombardment of the air (gas) particles with a surface. Density is defined as the mass per volume of a substance. Thus, air density is defined as the mass of air per unit volume.
If that Explanation does not make any sense let me make it easier.
The air at the top of a mountain is cooler than the air at the bottom. This temperature difference is due to a phenomenon that occurs in Earth’s atmosphere. Air rises and sinks based on differences in temperature and pressure. Here’s a quick experiment that will help explain the role of pressure.Take in a deep breath as if you were ready to blow out birthday candles. Puff your cheeks with air like a chipmunk. Hold it for a few seconds, and then blow the air slowly from your cheeks.Cold air sinks while warm air rises because cold air is denser than warm air. When a lot of cold air sinks, it creates an area of high air pressure where it hits the surface. This high-pressure air flows to an area of low pressure, creating wind. When this air warms, it rises up into the atmosphere.Temperature decreases as altitude increases. That’s why a mountain peak may be covered with snow while the bottom of the mountain is full of green plants and trees. When warm air rises into the atmosphere, it cools. The density of the air increases as it cools, which eventually creates an area of high pressure and starts the cycle again.
If not for this phenomenon of air rising and sinking in the atmosphere, there would be no wind or weather.
I hope that helped!
They confessed their guilt.
Answer:
heyyy
May I Know the full question
Un consumator electric conectat la o tensiune de 220V are rezistenta electrica R=100ohmi Ce putere electrica are consumatorul? 1 point 484W 220W 440W
Which of the following statements about Copernicus' heliocentric model of the Solar System are accurate?
It was the first such model was supported by scientific evidence.
It was not published until Copernicus was close to death.
It was the first time a heliocentric model had ever been suggested.
It was not controversial, and was readily accepted.
It stated that the Sun revolved around the Earth.
It stated that the Earth revolved around the Sun.
Answer:
(i) It was the first such model was supported by scientific evidence: FALSE
(ii) It was not published until Copernicus was close to death: TRUE
(iii) It was the first time a heliocentric model had ever been suggested: FALSE
(iv) It was not controversial, and was readily accepted: FALSE
(v) It stated that the Sun revolved around the Earth: FALSE
(vi) It stated that the Earth revolved around the Sun: TRUE
Explanation:
We proceed to demonstrate the validity of each option from statement:
(i) It was the first such model was supported by scientific evidence: FALSE
The geocentric model was based mostly on interpretation of two astronomical findings: (a) The displacement of the stars with respect to Earth due to stellar parallax, (b) The apparent consistency of brightness of the planet Venus seen from Earth.
(ii) It was not published until Copernicus was close to death: TRUE
Copernicus published his heliocentric theory, contained in the book De revolutionibus orbium coelestium, months before his death, in 1543.
(iii) It was the first time a heliocentric model had ever been suggested: FALSE
Greek mathematician and astronomer Aristarchus of Samos was the first person who proposed the heliocentric model in the 4th Century.
(iv) It was not controversial, and was readily accepted: FALSE
The Roman Catholic Church defended geocentric model proposed by Claudius Ptolemy and Tycho Brahe and rejected the model proposed by Copernicus, whose publication was included in the Index Librorum Prohibitorum in 1616.
(v) It stated that the Sun revolved around the Earth: FALSE
This is the main idea of the geocentric model.
(vi) It stated that the Earth revolved around the Sun: TRUE
This is the main idea of the heliocentric model.
When materials absorb heat, the kinetic energy of the particles _________?
a. increases
b. decreases
c. remains the same
Answer:
A
Explanation:
The atoms started to get "overly excited" and started to move faster than they usually do. When this happens, energy is released in the form of heat, light or etc. Because of this, kinetic energy increases and atoms colliding with each other happens more often.
A 1 kg box is sitting on a flat horizontal surface that has a coefficient of static friction value of 0.8. What answer best states the minimum force required to move the box in the horizontal direction?
A. >-9.8N
B. >9.8N
C. >7.84N
D. >9N
The normal force felt by the box has magnitude
F[normal] = (1 kg) g = 9.8 N
so that the maximum magnitude of static friction is
F[s. friction] = 0.8 F[normal] = 7.84 N
In order to get the box to move, (C) a minimum force of 7.84 N is required.
An object is spun around in circular motion such that its frequency is 500 Hz.
a. What is the period of its rotation?
b.
HowW much time will be required to complete 7 rotations?
Explanation:
Given parameters:
Frequency = 500Hz
Unknown:
a. Period of rotation
b. Time required to complete 7 rotation
Solution:
The period of rotation is the time taken to complete a turn.
P = [tex]\frac{t}{n}[/tex]
P is the period
t is the time
n is the number of turns
Period is the inverse of frequency;
P = [tex]\frac{1}{500}[/tex] = 0.002s
b.
Time required to complete 7 rotation;
P = [tex]\frac{t}{n}[/tex]
t = P x n
t is the time
P is the period
n is the number of rotations
t = 0.002 x 7 = 0.014s
Sam is moving house and is carrying a 300N box of books up a flight of steps 5m high, it takes her 30 seconds. Gary follows her carrying a bag of clothes doing 1000 J of work; it only takes him 25 seconds. Who provides the biggest power? Show your working.
Answer: Sam provides the biggest power
Explanation: Power is defined, in Physics, as the rate of work done. Work is energy transferred to an object due to the force causing the displacement of the object.
So, to determine Power:
For Sam:
P = [tex]\frac{work}{time}[/tex]
[tex]P=\frac{F.d}{t}[/tex]
[tex]P=\frac{300.5}{30}[/tex]
P = 50 Watts
The unit for Power is [P] = J/s = Watt
For Gary:
P = [tex]\frac{work}{time}[/tex]
[tex]P=\frac{1000}{25}[/tex]
P = 40 Watts
Comparing power of Sam and Gary, we can conclude that Sam provides the biggest power of 50 Watts.
On the pH scale, where can you find strong acids and strong bases?
Explanation:
The pH scale is an index ranging from 0-14 which measures the acidity or basicity of substances. The closer the pH of an acid to 0 the stronger it is and the closer the pH of a base to 14,the stronger it is.
H+ H+He
A. alpha decay
B. beta decay
C. nuclear fusion
D. nuclear fission
Help
Answer:
c. nuclear fusión oh A. alpha decay
A distance of 0.002 m separates two objects of equal mass. If the gravitational force between them is
0.0104 N, find the mass of each object.
Answer: 24.97 kg
Explanation:
The gravitational force between two objects of masses M1, and M2 respectively, and separated by a distance R, is:
F = G*(M1*M2)/R^2
Where G is the gravitational constant:
G = 6.67*10^-11 m^3/(kg*s^2)
In this case, we know that
R = 0.002m
F = 0.0104 N
and that M1 = M2 = M
And we want to find the value of M, then we can replace those values in the equation to get
0.0104 N = (6.67*10^-11 m^3/(kg*s^2))*(M*M)/(0.002m)^2
(0.0104 N)*(0.002m)^2/(6.67*10^-11 m^3/(kg*s^2)) = M^2
623.69 kg^2 = M^2
√(623.69 kg^2) = M = 24.97 kg
This means that the mass of each object is 24.97 kg
6. Which phase of matter has a definite volume and shape.
a. solid
b. liquid
c. gas
d.plasma
Answer:
solids
Explanation:
beacause if you take an ice cube does it change its shape no and if it has a definite shape it is sure to have a definite volume
PLEASE ANSWER FAST
Calculate the density of an object with a mass of 15.6 grams and a volume of 2 cm3
Given :
Mass of object, m = 15.6 grams.
Volume of object, V = 2 cm³.
To Find :
The density of the object.
Solution :
We know, density of an object is given by :
[tex]\rho = \dfrac{m}{V}\\\\\rho = \dfrac{15.6}{2}\ grams/cm^3\\\\\rho = 7.8\ grams/cm^3[/tex]
Hence, this is the required solution.
What are the types of motion that can be observed in a pendulum ? Some one please answer.√
Answer:
periodic motion
Explanation:
The massive object is affectionately referred to as the pendulum bob. When the bob is displaced from equilibrium and then released, it begins its back and forth vibration about its fixed equilibrium position. The motion is regular and repeating, an example of periodic motion.
please help me!! will mark brainliest
Two objects are shown below. One is neutral and the other is negative. What do you predict would happen?
Answer:
The body becomes a positive charged body.
Explanation:
Given that two objects are shown below. One is neutral and the other is negative. What do you predict would happen?
According to the law of static electricity, like charges repel each other while unlike charges attract each other.
Since one of the object is neutral and the other one is negative, there will neither attraction nor repulsion between them.
Also, according to Electrostatic induction, the neural body can be charged and becomes positive.
The negative body will attract all the positive charges to its side, and repel all the negative charges to the other side. If the body is touched at the other end, the whole negative charges will be earthed and the body will become a positive body.
in physics, the use of force to move an object is called
Answer:
In physics, work means the use of force to move an object. ... Not all force that is used to move an object does work. For work to be done, the force must be applied in the same direction that the object moves
The use of force to move an object is called Work.
A force can change the motion of an object. A force causes an object with mass to change its velocity (acceleration).
[tex]\bold{Force = Mass\times acceleration}[/tex]
while work is the result of the action when a force causes an object to move in the direction of the force.
[tex]\bold{Work= Force\times Displacement}[/tex]
Therefore, the use of force to move an object is called Work.
To know more visit:
https://brainly.com/question/4095205
4. Describe solids and
give an example.
Answer:
A solids molecules are tightly packed to get her and an examle of a sold is a rock
Explanation:
a set of related measures or activities with a particular long term aim
Answer:
program explanation
Explanation:
program explanation
The set of activities having a long-term aim should be a program.
What is the program?A program refers to a set of instructions that a computer follows in order to perform a specific task. At the time When you program a computer, you provide it a set of instructions to make it able to perform a particular task.
So here the program should be considered.
Learn more about activities here:https://brainly.com/question/16636072
no wrong answers please
What is always true about the light ray that emerges from the right side of the lens?
the human body station 2
Answer:
...?
Explanation:
what happens when two forces at same direction
Answer:
Explanation:
· If two forces are in the same direction, then one adds them to find the net force, which is the vector sum of these forces. However, when two forces act in opposite direction, one has to subtract the lesser force from the larger one to find the resulting force. The resultant is the direction of the larger of these two forces.
A train is accelerating at a rate of 2.0 m/s/s. If it accelerates at this rate for 30
seconds, what is the change of velocity? *
Answer:
60m/s
Explanation:
Given parameters:
Acceleration = 2m/s²
Time = 30s
Unknown:
Change in velocity = ?
Solution:
Acceleration is the rate of change of velocity with time.
Mathematically;
Acceleration = [tex]\frac{Change in velocity }{Time }[/tex]
Now,
Change in velocity = Acceleration x time
So,
input the parameters and solve;
Change in velocity = 2 x 30 = 60m/s
Which term is also known as a "rate of change"? * a motion b distance c reference point d speed
Acceleration is the answer.............
An LED light bulb is favored over an incandescent light bulb because it is more , what?
An LED light bulb is favoured because it is more bright.
An LED light is favored over an incandescent light bulb because it is more bright than the incandescent bulb.
What is an LED bulb?An LED is a light emitting diode. It is used widely for the production of light because it shows some advantages which include:
Many traditional lighting systems like the incandescent bulbs turn more than 90% of the energy which they use to heat, allocating only about 10% of energy to actual light production. LEDs emit almost no heat energy, and most of the light energy they emit is within the visible spectrum.
LEDs use much less energy than that of incandescent bulbs because the diode light is much more efficient, power-wise, than the filament light. LED bulbs use more than 75% less energy than those of incandescent lighting.
Learn more about LED bulb here:
https://brainly.com/question/30272515
#SPJ6
If 100.0 g of a substance releases 45 kJ of energy as it cools from 13.0°C to –15.0°C, what is the specific heat capacity of the substance?
Answer:
16,071.42J/kgKExplanation:
The formula for expressing the quantity of heat released is expressed as;
Q = mcΔt
m is the mass of the substance = 100g - 0.1kg
c is the specific heat capacity of the substance
Δt is the change in temperature = 13 -(-15) = 28°C
Substitute and get c;
45000 = 0.1c(28)
2.8c = 45000
c = 45000/2.8
c = 16,071.42J/kgK
Hence the specific heat capacity of the substance is 16,071.42J/kgK
Which is NOT a part of an electric motor?
a.
armature
b.
brushes
c.
commutator
d.
slip ring
While having an argument, two people each push on a couch with 200 N of force in opposite directions. What is the net force on the couch? Explain how you found the answer.
Answer:
Explanation:
Net force = 0
This is a very instructive question to do. Here's what the situation looks like
[tex]====>\box{Couch) }<====\\[/tex]
The two forces are going in opposite directions. One is going 200 N to the right and the other is going 200N to the left.
The net result is 0.
Put in formula form, it looks like this.
Going left is the negative direction
F_right - F_left = 200 - 200 = 0
50 POINTS !!!
What happens to ice when in water?
Which type of matter is likely to absorb the most sound waves
A:hot air
B:metal door
C:foam wall:
D:Loudspeaker
Answer:
im postive its D) loudspeaker
Answer:
foam wall
Explanation:
ap3x