Answer:
Photosynthesis makes the glucose that is used in cellular respiration to make ATP. The glucose is then turned back into carbon dioxide, which is used in photosynthesis. While water is broken down to form oxygen during photosynthesis, in cellular respiration oxygen is combined with hydrogen to form water.
hope this helps!
Andesitic rock is an igneous rock with a composition in between that of basaltic and granitic igneous rock.
true or false
Answer:
Explanation:
intristing
How much water would need to be added to 1092 mL of a 54.7 M NaCl solution to make a 0.25 M solution?
Answer:
237.8L of water would need to be added.
Explanation:
The first thing to do is to identify that the equation to be used is M1V1=M2V2. (This equation works because it turns everything into moles which can then be compared).
Then figure out what information you have and what is being found. In this case:
M1 = 54.7 M
V1 = 1092 mL = 1.092 L
M2 = 0.25 M
V2 = unknown
Then solve the equation for whatever you are trying to find.
M1V1=M2V2
V2=M1V1/M2
Now you need to plug everything in.
V2=(54.7M*1.091L)/0.25M
V2=238.93L
That means that the solution needs a volume of 238.7L to gain a molarity of 0.25M but the starting solution already had a volume of 1.092 L meaning that to find the amount of solvent that needs to be added you just subtract the starting volume by the volume that the solution needs to be.
238.93L - 1.091L = 237.8L
Therefore the answer is that 237.8L needs to be added to a 1.092L 54.7M NaCl solution to make the concentration 0.25M.
I hope this helps. Let me know if anything is unclear.
The nutrition label shows the total amount of carbohydrates in grams. One gram of carbohydrates provides four calories of energy.
For this food, the number of calories obtained from carbohydrates is
.
Answer:
Dude you need to provide an image because almost everyone is not gonna know what u talkin about.
Explanation:
NEED HELP ASAP!!
(04.04 LC)
Which statement is true about the products of cellular respiration?
They contain oxygen.
They contain glucose.
They become the products of photosynthesis.
They become the reactants of photosynthesis.
Answer:
They contain oxygen
hope it helps
100
80
100 mL
water vapor
Which statement describes what will happen if a student pushes the plunger
to compress the water vapor?
A. The total number of water particles will increase.
B. The amount of energy in the water particles will decrease.
C. The amount of empty space between the water particles will
decrease
D. The total volume of the water particles will increase
I will mark brainliest
Answer:
Explanation:it is c
Answer:
C The amount of empty space between the water particles will decrease
Explanation:
I just took the quiz, have a nice day!
Why is it possible for an active metal like aluminum to be useful as a structural metal?
Answer:
Aluminum even after being an active metal is used as a structural metal due to its toughness, high strength, lightweight, and resistance to the process of corrosion. It is resistant to corrosion as its reactivity gets suppressed due to the formation of an aluminum oxide film which is protective in nature, on its surface. Passivation is the term for the formation of the protective coating.
Two descriptions about physical quantities are given below:
Quantity A: It is a force.
Quantity B: It changes when the object travels from Earth to Earth's moon.
What quantities are these most likely describing?
Select one:
a. Both Quantity A and Quantity B are mass.
b. Both Quantity A and Quantity B are weight.
c. Quantity A is weight and Quantity B is mass.
d. Quantity A is mass and Quantity B is weight.
Answer:
[tex]\huge\boxed{\sf Option \ B}[/tex]
Explanation:
=> Weight is an attractive force which is exerted on any body.
=> It changes when the object's place changes as it depends upon the acceleration due to gravity ( g = 9.8 m/s ) which changes as we move from place to place.
[tex]\rule[225]{225}{2}[/tex]
Hope this helped!
~AnonymousHelper1807is pure water a solution
Answer: No because a solution is a homogeneous MIXTURE of two or more substances. Water is a pure substance. It is made of hydrogen and oxygen, but shares none of their properties. So it’s pure.
Explanation:
Describe the process of dimensional analysis and explain why it is so useful in chemical problem solving.
Answer:
Dimensional Analysis (also called Factor-Label Method or the Unit Factor Method) is a problem-solving method that uses the fact that any number or expression can be multiplied by one without changing its value. It is a useful technique.
In what way is cellular respiration like breathing?
Answer:Cellular respiration is not the same as breathing, but they are closely related
Explanation: When you breathe in, you take in the oxygen your cells need for cellular respiration. When you breathe out, you get rid of carbon dioxide that your cells produce during cellular respiration.
17 Which changes decrease the rate of reaction between magnesium and air?
1.heating the magnesium to a higher temperature
2.using a higher proportion of oxygen in the air
3.using magnesium ribbon instead of powdered magnesium
A 1, 2 and 3
B 1 only
C 2 only
D 3 only
Using magnesium ribbon instead of powdered magnesium decrease the rate of reaction between magnesium and air.
What is rate of reaction?Rate of reaction tells about the duration of the completion of the reaction.
Rate of any reaction is directly proportional to the concentration and surface area of the reactant, temperature, catalyst, no. of collision, activation energy, etc.
So, if we magnesium in the ribbon instead of powdered magnesium the surface area of the reactant side decreases which results in the decrease of the rate of reaction.
Hence, option (D) is correct i.e. rate of reaction decreases on using magnesium ribbon instead of powdered magnesium.
To know more about rate of reaction, visit the below link:
https://brainly.com/question/1898560
An object that has kinetic energy must be?
A at rest
B stopped
C in motion
Or
D at an elevated position
Answer:
C in motion
Explanation:
trust
Which of the following is not a balanced nuclear equation?
O a) 130 Sn + B + 1315b
d) 19Pt → 158 Os+ja
c) Be → 19 Li + AB
b) 2U → 1a +
234
90
Th
Ne
Answer:
¹⁰₄Be —> ¹⁰₃Li + ⁰₋₁β
Explanation:
To know which equation is unbalanced, we shall compare the mass number and atomic number of the reactant and product together. This is illustrated below:
¹²¹₅₀Sn —> ⁰₋₁β + ¹²¹₅₁Sb
121 = 0 + 121
121 = 121
50 = –1 + 51
50 = 51
Thus the above equation is balanced
¹⁹⁰₇₈Pt —> ¹⁸⁶₇₆Os + ⁴₂α
190 = 186 + 4
190 = 190
78 = 76 + 2
78 = 78
Thus, the above equation is balanced
¹⁰₄Be —> ¹⁰₃Li + ⁰₋₁β
10 = 10 + 0
10 = 10
4 = 3 + (–1)
4 = 3 – 1
4 = 2
Thus, the above equation is unbalanced.
²³⁸₉₂U —> ⁴₂α + ²³⁴₉₀Th
238 = 4 + 234
238 = 238
92 = 2 + 90
92 = 92
Thus, the above equation is balanced.
From the illustrations made above, only ¹⁰₄Be —> ¹⁰₃Li + ⁰₋₁β
Is unbalanced.
How many molecules of carbon tetrachloride are equal to 0.25moles
All of these affect weather except!
A. Air pressure
B. Humidity
C. Barometer
D. Wind speed
Answer:
C.Barometer
Explanation:
is chromate polar or nonpolar?
Answer:
i THINK so
Explanation:
im not sure tho sorry if wrong
7. Which of the following pairs of elements is most likely to form an ionic
compound?
b. potassium and neon
c. barium and aluminum
a. oxygen and fluorine
d. lithium and bromine
Answer:
not sure if this us right but oxygen and fluorine? I learned chem but I forgot about it kinda sorry
The heat of vaporization of diethyl ether is . Calculate the change in entropy when of diethyl ether boils at . Be sure your answer contains a unit symbol. Round your answer to significant digits.
Answer:
[tex]\Delta S=900\frac{J}{K}[/tex]
Explanation:
Hello!
In this case, since the information is not missing, the following one will be used as it is found on similar problems:
[tex]\Delta h=26.7kJ/mol\\T_b=34.6\°C\\m=769.0g[/tex]
In such a way, we use the following equation to compute the entropy:
[tex]\Delta S=\frac{n\Delta h}{T_b}[/tex]
Whereas n (moles) are computed by using its molar mass (74.14 g/mol) as follows:
[tex]n=769.0g*\frac{1mol}{74.14g}=10.4mol[/tex]
[tex]\Delta S=\frac{10.4mol*26.7\frac{kJ}{ml} }{(34.6+273.15)K}\\\\\Delta S=0.900 \frac{kJ}{K} \\\\\Delta S=900\frac{J}{K}[/tex]
Best regards!
A radiometer is shown below. When infrared light passes through the radiometer
d Which properties of plastics cause a problem when the container is empty?
Answer: Both of these are of great concern to human health. BPA is used in many things including plastic bottles and food packaging materials. Over time the polymer chains of BPA break down, and can enter the human body in many ways from drinking contaminated water to eating a fish that is exposed to the broken down toxins.
Explanation:
I think you will get it
A 4.03 g sample of nitrogen gas has a volume of 921 milliliters at a pressure of 3.19 atm. The temperature of the N2 gas sample is:_____.
Answer:
249 K
Explanation:
Step 1: Given data
Mass of nitrogen (m): 4.03 gVolume of the gas (V): 921 mL = 0.921 LPressure of the gas (P): 3.19 atmStep 2: Calculate the moles corresponding to 4.03 g of nitrogen
The molar mass of N₂ is 28.01 g/mol.
4.03 g × 1 mol/28.01 g = 0.144 mol
Step 3: Calculate the temperature of the gas sample
We will use the ideal gas equation.
P × V = n × R × T
T = P × V / n × R
T = 3.19 atm × 0.921 L / 0.144 mol × 0.0821 atm.L/mol.K
T = 249 K
Please help with this question..thank you
How can the image be described? Check all that apply.
smaller than the object
real
right-side up
larger than the object
upside down
virtual
Answer:
Smaller than the object
Real
Upside down
Explanation:
The image formed by a convex lens will always be real and smaller. The image formed is smaller than the object, real ,upside down and right side up. Hence, options 1,2,3 and 5 are correct.
What is convex lens?Convex lens is a type of lens, in which one at least one side is curved outside. These lenses have the ability to focus an outside light beam to a spot on the opposite side by converging it.
The focal length of the convex lens is the distance from the lens's center to this point, which is known as the focus. On the other hand, a plano-convex lens has one surface that is flat and the other that is convex.
Convex lenses cause light from an item to bend, creating an upright, smaller, and inverted picture of the original object. As a result, the candle in this instance will be smaller, upside down, and actual.
Find more on convex lens:
https://brainly.com/question/1604692
#SPJ6
When [H+] = 4.0 × 10–9 M in water at 25°C, then
Kw =1.0×10–14.
b. pOH = 7.
c. [H3O+] = [OH–].
d. pH= 7
e. A-D are all correct
Answer:
a. Kw = 1.0 × 10⁻¹⁴
Explanation:
a. Let's consider the self-ionization of water.
2 H₂O(l) ⇄ H₃O⁺(aq) + OH⁻
The ion-product of water (Kw) at 25 °C is:
Kw = [H₃O⁺][OH⁻] = 1.0 × 10⁻¹⁴
c. Considering [H⁺] = [H₃O⁺] = 4.0 × 10⁻⁹ M, the concentration of OH⁻ is:
[OH⁻] = 1.0 × 10⁻¹⁴/[H₃O⁺] = 2.5 × 10⁻⁶ M
b. We can calculate the pOH using the following expression.
pOH = -log [OH⁻] = -log 2.5 × 10⁻⁶ = 5.6
d. We can calculate the pH using the following expression.
pH = -log [H⁺] = -log 4.0 × 10⁻⁹ = 8.4
When [H+] = 4.0 × 10–9 M in water at 25°C, then the [tex]Kw =1.0\times 10^-^1^4.[/tex]
What is dissociation constant?
Kw is the dissociation constant or ionization constant of water.
The self-ionization of water will be
[tex]\rm 2 H_2O(l) = H_3O^+(aq) + OH^-[/tex]
The dissociation constant of the water at 25°C will be
[tex]\rm Kw = [H_3O^+][OH^-] = 1.0 \times 10^-^1^4[/tex]
Thus, the correct option is a. [tex]Kw =1.0\times 10^-^1^4.[/tex]
Learn more about dissociation constant
https://brainly.com/question/3657057
Which equation best represents the balanced net ionic equation for the reaction that occurs when aqueous solutions of lithium phosphate and magnesium nitrate are mixed?
Answer:
2 PO₄³⁻(aq) + 3 Mg²⁺(aq) ⇒ Mg₃(PO₄)₂(s)
Explanation:
Let's consider the molecular equation that occurs when aqueous solutions of lithium phosphate and magnesium nitrate are mixed.
2 Li₃PO₄(aq) + 3 Mg(NO₃)₂(aq) ⇒ 6 LiNO₃(aq) + Mg₃(PO₄)₂(s)
The complete ionic equation includes all the ions and insoluble species.
6 Li⁺(aq) + 2 PO₄³⁻(aq) + 3 Mg²⁺(aq) + 6 NO₃⁻(aq) ⇒ 6 Li⁺(aq) + 6 NO₃⁻(aq) + Mg₃(PO₄)₂(s)
The net ionic equation includes only the ions that participate in the reaction and insoluble species.
2 PO₄³⁻(aq) + 3 Mg²⁺(aq) ⇒ Mg₃(PO₄)₂(s)
why are there different types of matter.
Answer:
solid ; liquid and gas........
True or False: In general, the farther a location is from the equator, the cooler the climate.
Answer: True
Explanation: The farther away from the center or heat.
Answer:
Yes
Explanation:
The equator is the imaginary belt around the earth and it is created and named because the sun mostly shines on that part/line making heat which causes it to be hot.
How do substances and mixtures diifer
The composition of one is always the same, and the composition of the other varies
One contains only one type of atom, and the other contains two or more
One is always homogeneous, and the other is always heterogeneous
One contains one type of molecule, and the other contains two types
it for 100 points please give it correctly.
Answer:
hello hope this helps :)
a pure substance consists only of one element or one compound. a mixture consists of two or more different substances, not chemically joined together.
Explanation:
.What does the changing the Aperture do when taking a photo? *
4.What effect can you get from using a slow shutter speed? *
5.What effect can you create by using a quick shutter speed?
Answer:
Slower shutter speeds like 1/60 second and slower cause a blurring effect. If you want to take a picture using a slow shutter speed, it is best to mount the camera on a tripod and use image stabilization (such as SteadyShot® technology) to reduce the chance of any unwanted camera movement.
The first big effect of it is motion blur. If your shutter speed is long, moving subjects in your photo will appear blurred along the direction of motion. ... If you use an especially fast shutter speed, you can eliminate motion even from fast-moving objects, like birds in flight, or cars driving past.
Explanation:
You have 250.0 mL of 4.00 M sugar solution. You added 216.1 mL of water to this solution. Determine the concentration of the sugar solution after the addition of water.
Answer:
[tex]M_2=2.15M[/tex]
Explanation:
Hello!
In this case, since the dilution processes are characterized by the addition of extra solvent, in this case water, to an initial solution in order to decrease the concentration of the solute, in this case sugar; as water is added, the moles of sugar remain unchanged, so the following equation can be written:
[tex]n_1=n_2\\\\M_1V_1=M_2V_2[/tex]
Whereas 1 accounts for the initial 250.0 mL of 4.00 M sugar and 2 for the concentration at the new volume which is:
[tex]V_2=250.0mL+216.1mL=466.1mL[/tex]
Thus, the final concentration is:
[tex]M_2=\frac{M_1V_1}{V_2} =\frac{250.0mL*4.00M}{466.1mL} \\\\M_2=2.15M[/tex]
Best regards!