Which power source uses the rotation of giant magnets to create electricity,
which is then directed to the electric outlets in people's homes?
OA. An electric motor
B. An electric battery
OC. An electric generator
OD. Electromagnetism
SUBMIT

Answers

Answer 1

An electric generator uses the rotation of giant magnets to create electricity, Therefore option C is the correct answer.

An electric generator is a widely used electronic device which is used in many types of power plants like hydro power plant, thermo nuclear power plant, etc. The generator converts the kinetic energy into electrical energy using electromagnetism. The electricity created by the generator is then sent to electrical outlets in people's households via power lines and poles.

The generator has a rectangular electromagnetic coil which rotates between the poles of a permanent magnet. When the coil is moved using kinetic energy (for example : high flow of water or steam), it creates an induced electric current in the coil due to the change in Magnetic flux, ultimately generating electricity.

Learn more about Electromagnetism here,

https://brainly.com/question/17057080


Related Questions

Look at the symbol equation below. Which is the missing product? mgco3+2hcl-->___+h2o+co2

Answers

MgCO₃ + 2HCl ⇒ MgCl₂ + H₂O + CO₂ is the balanced chemical equation. Therefore, the missing product is MgCl₂.

What is balanced chemical equation ?

The term balanced chemical equation is defined as a chemical equation in which mass is conserved and there are the same numbers of atoms of each element on both sides of the equation.

The chemical equation must be balanced in order to obey the law of conservation of mass. When the number of different atoms of elements in the reactants side equals the number of atoms in the products side, the chemical equation is balanced.

Thus, MgCO₃ + 2HCl ⇒ MgCl₂ + H₂O + CO₂ is the balanced chemical equation. Therefore, the missing product is  MgCl₂.

To learn more about the balanced chemical equation, follow the link;

https://brainly.com/question/28294176

#SPJ1

find the concentration of barium hydroxide using titration data trial

Answers

We can calculate the molarity by dividing the quantity of barium hydroxide in moles by the volume of the initial solution.

How do you find the hydroxide concentration?Implement the titration formula.The formula is molarity (M) of the acid x volume (V) of the acid = molarity (M) of the base x volume (V) of the base when the titrant and analyte have a mole ratio of 1:1.The concentration of a solution, measured in moles of solute per liter of solution, is known as its molarity.After dissociation, the concentration of barium hydroxide will be half that of the hydroxide ions because barium hydroxide dissociates into its ions when dissolved in water as:A barium hydroxide solution with a pH of 12.22 therefore has a concentration of 8.29 10 3 M.

To learn more about hydroxide concentration refer

https://brainly.com/question/28464162

#SPJ1

a chemist carefully measures the amount of heat needed to raise the temperature of a 1.71 kg sample of a pure substance from 0.5 degrees celsius to 15/9 degrees celsius. the experiment shows that 3.66 kj of heat are needed. what can the chemist report for the specific heat capacity of the substance? round your answer to 3 significant digits.

Answers

The experiment shows that 3.66 kJ of heat are needed. 0.249 J/g°C or 249 J/kg°C, can the chemist report for the specific heat capacity of the substance.

The specific heat capacity of a substance is the amount of heat required to raise the temperature of a given mass of the substance by a certain amount. It is usually denoted by the symbol "c" and is measured in units of J/g°C or J/kg°C.

To calculate the specific heat capacity of the substance in this case, we can use the following formula:

c = Q / (m x ΔT)

where Q is the heat absorbed (or released) by the substance, m is the mass of the substance, and ΔT is the change in temperature.

In this case, the mass of the substance is 1.71 kg, the change in temperature is (15/9 - 0.5)°C = 14.6°C, and the heat absorbed is 3.66 kJ.

c = 3.66 kJ / (1.71 kg x 14.6°C)

= 0.249 J/g°C or 249 J/kg°C

Therefore, the chemist can report that the specific heat capacity of the substance is 0.249 J/g°C or 249 J/kg°C, rounded to 3 significant digits.

To know more about specific heat please refer: https://brainly.com/question/11297584

#SPJ4

a sample of methane (ch4) gas contains a small amount of helium. calculate the volume percentage of helium if the density of the sample is 0.70902 g/l at 0.08c and 1.000 atm.

Answers

The volume percentage of helium in the sample is 25.06%.

For the volume percentage of helium in the sample of methane gas, we will first need to determine the density of the helium and the density of the methane.

We know that the density of the sample is 0.70902 g/L at 0.08 °C and 1.000 atm and that the sample contains methane (CH4) and helium (He).

The density of methane at 0.08°C and 1.000 atm is 0.717 g/L and the density of Helium is 0.178 g/L at the same temperature and pressure.

To find the volume percentage of helium in the sample, we can use the formula:

% Volume of helium = [tex](\frac{density of helium}{density of sample})[/tex] × 100%

% Volume of helium =  [tex](\frac{0.178}{0.70902} )[/tex] × 100%

% Volume of helium = 25.06%

So, the volume percentage of helium in the sample is 25.06%.

To know more about Density,

https://brainly.com/question/1354972

#SPJ4

if we have 325 g of glucose and 137 g o 2 , what is the limiting reagent, and what mass of co 2 will be produced?

Answers

If we have 325 grams of glucose and 137 grams of oxygen, the limiting reagent is oxygen. The mass of carbon dioxide that will be produced is 137 grams.

This means that the reaction will be limited by the amount of oxygen available, and not by the amount of glucose. The mass of carbon dioxide that will be produced will be equal to the mass of oxygen used in the reaction. In this case, 137 grams of carbon dioxide will be produced.

The reaction can be written as: glucose + oxygen --> carbon dioxide + water. This equation shows that for every molecule of glucose, 6 molecules of oxygen are needed to produce 6 molecules of carbon dioxide and 6 molecules of water.

Therefore, the amount of carbon dioxide produced will depend on how much oxygen is available. In this case, 137 grams of oxygen is available, so 137 grams of carbon dioxide will be produced.

To learn more about glucose, click here:

https://brainly.com/question/2396657

#SPJ4

Imagine you are a scientist employed by a manufacturer of cookware like pots and pans. Which of the materials in the table would you use for a ceramic baking dish, and why?

Answers

Answer:

As a scientist employed by a manufacturer of cookware, I would recommend using alumina (Al2O3) as the material for a ceramic baking dish.

A colorless liquid was added to anhydrous copper {ii} sulphate which turned blue.Why is it wrong to conclude the liquid is pure water?

Answers

The conclusion the student that the colorless liquid that was added to anhydrous copper {ii} sulfate which turned blue is pure water because anhydrous copper {ii} sulfate does not react with pure water.

What are the reaction of water and anhydrous copper {ii} sulfate?

A sample of anhydrous copper(II) sulfate becomes blue when water is present.

In the absence of water, it is also known as anhydrous copper(II) sulfate and is colorless.

When water molecules are added to anhydrous copper {ii} sulfate, the individual water molecules are held within the ionic lattice surrounding the copper(II) ions, it is still a dry solid resulting in the formation of blue hydrated copper {ii} sulfate.

This reaction does not occur with pure water.

Learn more about anhydrous copper {ii} sulfate at: https://brainly.com/question/24555008

#SPJ1

In the SI system of units, the mole is one of seven base units. It is frequently used in
chemical calculations. However, a mole of something is just a particular quantity of it, It
unit of measure in the way that meters, seconds, and kilograms are,
Calculations performed with the number of moles of a substance could also be
performed with the number of particles of a substance, Based on this information, do
you think that the mole should be considered a base unit in the Sl system? Explain why
or why not

Answers

The fact that the amount of substances is fundamental means that its unit, the mole should be a base unit.

What is the SI system?

We have to know that the SI unit is the internationally accepted unit that we can be able to use to obtain the quantities that are basic in physics. We know that there are some units that we call the base units.

The reason why we call them the base units is because all other computations are based on them. The mole should be a base unit because the mole deals with the amount of substance which is quite fundamental in science.

Learn more about mole:https://brainly.com/question/26416088

#SPJ1

this experiment tests how the temperature of water affects the time it takes for antacid tablets to dissolve. 1. what is the independent variable? 2. what is the dependent variable? materials

Answers

The independent variable in this experiment is the temperature of the water. The dependent variable in this experiment is the time it takes for the antacid tablets to dissolve.

The independent variable in this experiment is the temperature of the water. This is the variable that is being manipulated and changed in order to observe its effect on the dependent variable. The dependent variable in this experiment is the time it takes for the antacid tablets to dissolve. This is the variable that is being measured and observed in relation to the independent variable. The change in the independent variable (temperature of the water) will result in a change in the dependent variable (time for the antacid tablets to dissolve).

learn more about antacid tablets here:

brainly.com/question/13803795

#SPJ4

How do matter and energy move in and out of the atmosphere? How do changes in one area of the atmosphere affect other areas? The planet as a whole?

Answers

Matter and energy move in and out of the atmosphere through several processes.

How do matter and energy move in and out of the atmosphere?These include evaporation, precipitation, condensation, convection, and advection. Evaporation is the process by which liquid water turns into vapor and is released into the atmosphere.Precipitation is the process by which water droplets form in the atmosphere and then fall as rain, snow, hail, or other forms of precipitation.Condensation is the opposite of evaporation in which water vapor in the atmosphere condenses into liquid droplets. Convection is the transfer of heat energy through the movement of air and water molecules. Advection is the transfer of heat energy through the movement of air masses.Changes in one area of the atmosphere can affect other areas in a variety of ways. For example, if there is an increase in temperature in one area, this can lead to an increase in convection, which can cause air masses to move from one area to another, potentially bringing in warm air from other parts of the planet.This can, in turn, affect the temperature and weather patterns in other areas. Similarly, changes in precipitation, such as an increase in rain or snowfall, can lead to changes in the amount of water vapor in the atmosphere, which can affect weather patterns in other areas. These changes can also have global effects, such as increasing sea levels or changing global wind patterns.

To learn more about matter and energy move in and out of the atmosphere refer to:

https://brainly.com/question/11762179

#SPJ1

chemistry?
what is it?
Why do we use it?
explain in 3-5 sentences each question.​

Answers

Answer:  Chemistry, like physics and biology, is a natural science. In fact, there is considerable overlap between chemistry and these other disciplines. Chemistry is a science that studies matter. This includes atoms, compounds, chemical reactions, and chemical bonds.

Explanation:  Chemistry is the scientific study of the properties and behavior of matter. It is a natural science that covers the elements that make up matter to the compounds made of atoms, molecules, and ions: their composition, structure, properties, behavior, and the changes they undergo during a reaction with other substances.

Which of the following accurately describes activation energy

Answers

Answer:

Option A

Explanation:

Activation energy is defined as the minimum amount of extra energy required by a reacting molecule to get converted into product. It can also be described as the minimum amount of energy needed to activate or energize molecules or atoms so that they can undergo a chemical reaction or transformation.

Answer: A. The minimum amount of energy required for a reaction to happen

Explanation:

Activation energy is defined as the minimum amount of extra energy required by a reacting molecule to get converted into product. It can also be described as the minimum amount of energy needed to activate or energize molecules or atoms so that they can undergo a chemical reaction or transformation.

URGENT: What is the original concentration of a Strontium Hydroxide Solution with a pH of 13. 22?

Answers

The concentration of the strontium hydroxide, Sr(OH)₂ solution is 0.083 M.

What is the pH of a solution?

The pH of a solution is a measure of the molar concentration of hydrogen ions in the solution and as such is a measure of the acidity or basicity of the solution.

The letters pH stand for "power of hydrogen" and the numerical value is defined as the negative base 10 logarithms of the molar concentration of hydrogen ions.

Mathematically;

pH = - log [H⁺]

pOH = 14 - pH

where;

[H⁺] = concentration  of hydrogen ions

[OH⁻] = concentration of hydroxide ions

pOH = 14 - 13.22

pOH = 0.78

The concentration of hydroxide ions in the solution is:

[OH⁻] = 10⁻⁰°⁷⁸

[OH⁻] = 0.166 M

The concentration of the strontium hydroxide, Sr(OH)₂ solution = 0.166/2 M

The concentration of the strontium hydroxide, Sr(OH)₂ solution = 0.083 M

Learn more about pH at: https://brainly.com/question/172153

#SPJ1

Metamorphic rocks are made on the Earth's surface. true or false?

Answers

Metamorphic rocks are made on the Earth's surface. This statement is true.

Why are metamorphic rocks generally not found at the Earth's surface?

The majority of mountain ranges on Earth are composed primarily of metamorphic rock. However, metamorphic rocks form deep within the Earth when intense heat and pressure force existing rocks to change their crystalline structure, resulting in the formation of a new type of rock.

Although metamorphic rocks form deep within the Earth's crust, they are frequently exposed on the planet's surface.

Thus, Metamorphic rocks are made on the Earth's surface. This statement is true.

To learn more about the metamorphic rocks, follow the link;

https://brainly.com/question/19930528

#SPJ1

Find the similarities, differences, and relationships between coefficients and subscript. (At least 2 of each)

Answers

The subscripts are a part of the formulations and once the formulas for the reactants and products have been established, they cannot be changed.

What is the difference between coefficients and subscript?

The subscripts are a component of the formulas, and they cannot be modified after the formulas for the reactants and products have been established. The number of each material participating in the reaction is indicated by the coefficients, which can be modified to make the equation more or less balanced.

Although both coefficient and subscript are numerical terms, they provide different information on a particular chemical reaction. Coefficient indicates the number of moles of a material, whereas subscript gives the number of atoms in a molecule, and this is the main distinction between coefficient and subscript.

A smaller-than-usual number, figure, symbol, or indicator that is placed either slightly above (superscript) or below (subscript) the standard line of type is referred to as a superscript or subscript (subscript).

To learn more about coefficients and subscript refer to:

https://brainly.com/question/14425756

#SPJ1

indicate whether or not each of the structures is considered to be aromatic. compound a is a 3 carbon ring with a double bond between carbons 1 and 2. carbon 3 has a lone pair and a negative charge and is bonded to one hydrogen. compound b is a 5 carbon ring with two double bonds. the non alkene carbon has a carbocation. which is true?

Answers

Neither Compound A nor Compound B is aromatic.

The statement "compound A is a 3 carbon ring with a double bond between carbons 1 and 2. carbon 3 has a lone pair and a negative charge and is bonded to one hydrogen" and "compound b is a 5 carbon ring with two double bonds. the non-alkene carbon has a carbocation" is true.

Compound A is not considered to be aromatic because it does not meet the criteria for aromatic compounds. Aromatic compounds have a specific type of cyclic and fully conjugated system of electrons which allows them to have delocalized pi electrons and a cyclic ring of alternating single and double bonds. Compound A has a three-carbon ring with a double bond between carbons 1 and 2, but the third carbon has a lone pair and a negative charge, which breaks the conjugation of the ring.

It also lacks the cyclic ring of alternating single and double bonds, which is a requirement for aromaticity.

Compound B is not considered to be aromatic because it does not meet the criteria for aromatic compounds. Aromatic compounds have a cyclic ring of alternating single and double bonds. Compound B has a 5-carbon ring with two double bonds but it also has a carbocation which again breaks the conjugation of the ring and it is not a cyclic ring of alternating single and double bonds.

Read more about Organic chemistry:

https://brainly.com/question/704297

#SPJ4

a. rate of condensing > rate of bubbling b. rate of dissolution < rate of deposition c. rate of dissolution > rate of deposition d. rate of bubbling > rate of dissolving e. rate of dissolution

Answers

Dynamic equilibrium can be defined as rate of dissolution = rate of deposition. So, option D is correct.

Once a reversible reaction takes place in chemistry, a dynamic equilibrium is present. There is no net change because substances transition equally between reactants and products. The rate at which reactants and products form ensures that neither of their concentrations change. It is an example of a system that is in a constant state specifically.

An equation's equilibrium can be altered and pulled out of dynamic equilibrium by altering the temperature, pressure, or concentration of a reaction. This is the reason why if you open a Coke can and leave it outside for a while, it will ultimately turn "flat" and no longer have any bubbles. This is due to the fact that the soda can is no longer a closed system and the carbon dioxide is now free to interact with the environment. This throws it out of dynamic equilibrium and lets out carbon dioxide gas until there are no bubbles left.

To know more about Dynamic equilibrium

brainly.com/question/26034510

#SPJ4

The complete question is:

Dynamic equilibrium can be defined as:

A) rate of bubbling > rate of dissolving

B) rate of dissolution > rate of deposition

C) rate of dissolution < rate of deposition

D) rate of dissolution = rate of deposition

which element is a gas at stp

Answers

Answer:

At standard temperature and pressure (STP), which is defined as 0 °C (273.15 K) and 100 kPa (1 atmosphere), several elements exist as gases.

The elements that are gases at standard temperature and pressure include:

Helium (He)

Neon (Ne)

Argon (Ar)

Krypton (Kr)

Xenon (Xe)

Radon (Rn)

Hydrogen (H2)

Answer:

At standard temperature and pressure (STP), which is defined as 0 °C (273.15 K) and 100 kPa (1 atmosphere), several elements exist as gases.

The elements that are gases at standard temperature and pressure include:

Helium (He)

Neon (Ne)

Argon (Ar)

Krypton (Kr)

Xenon (Xe)

Radon (Rn)

Hydrogen (H2)

How many grams of sodium fluoride

(NaF) are dissolved in 3. 75 L of a

1. 55 M solution?

Molar Mass Na: 22. 99 g/mol

Molar Mass E: 19. 00 g/mol

Answers

164.22 grams of sodium fluoride are dissolved in 3.75 L of a 1.55 M solution.

To find the number of grams of sodium fluoride (NaF) dissolved in 3.75 L of a 1.55 M solution, you can use the formula:

molarity (M) x volume (L) x molar mass (g/mol) = mass (g)

Sodium fluoride (NaF) has the following molar mass:

22.99 g/mol (Na) + 19.00 g/mol (F) = 41.99 g/mol

So the mass of sodium fluoride dissolved in 3.75 L of a 1.55 M solution is:

mass (g) = 1.55 M x 3.75 L x 41.99 g/mol = 164.22 g

Therefore, 164.22 grams of sodium fluoride are dissolved in 3.75 L of a 1.55 M solution.

Learn more about molar mass here:

https://brainly.com/question/22997914

#SPJ4

thproium-232 is a radioactive isotipe of throium. how many neytrosna re located in the nucleus of theorum 232

Answers

142 neutrons are in the nucleus of theorem-232, which is a radioactive isotope of thorium.

The number of neutrons located in the nucleus of thorium-232 can be calculated using its atomic mass and atomic number. The atomic mass of thorium-232 is 232 and the atomic number is 90. The atomic number represents the number of protons in the nucleus, and since protons and neutrons have the same mass, we can calculate the number of neutrons by subtracting the atomic number from the atomic mass.

232 - 90 = 142

So, there are 142 neutrons located in the nucleus of thorium-232.

You can learn more about thorium-232 at

https://brainly.com/question/11228570

#SPJ4

a 64.8 g 64.8 g sample of the compound x2o5 x 2 o 5 contains 48.0 g 48.0 g of oxygen atoms. what is the molar mass of element x?

Answers

A 64.8 g 64.8 g sample of the compound x2o5 x 2 o 5 contains 48.0 g 48.0 g of oxygen atoms. The molar mass of element x is 56 g/mol.

To determine the molar mass of element X, we can use the information provided about the mass of the compound and the mass of the oxygen atoms.

First, convert the mass of the compound to moles by dividing it by the molar mass of the compound:

(64.8 g) / (molar mass of X2O5) = moles of X2O5

Next, use the moles of X2O5 to determine the moles of oxygen atoms by multiplying by the number of oxygen atoms per molecule of X2O5:

moles of X2O5 x (5 moles of O / 1 mole of X2O5) = moles of O

Then, convert the mass of the oxygen atoms to moles by dividing it by the molar mass of oxygen:

(48.0 g) / (16.00 g/mol) = 3.00 moles of O

We know that the mass of the compound is equal to the mass of the element X and the mass of the oxygen atoms.

mass of X = mass of the compound - mass of the oxygen atoms

mass of X = 64.8 - 48.0 = 16.8 g

convert the mass of element X to moles by dividing it by the molar mass of X:

(16.8 g) / (molar mass of X) = moles of X

Now we can calculate the molar mass of element X by using the moles of X and the mass of X

molar mass of X = mass of X / moles of X

molar mass of X = 16.8 g / (3.00 moles of O x (1 mole of X2O5 / 2 moles of X)) = 56 g/mol.

The molar mass of element X is 56 g/mol.

To know more about compound please refer: https://brainly.com/question/13516179

#SPJ4

the heat of vaporization of diethyl ether is . calculate the change in entropy when of diethyl ether condenses at .

Answers

The change in entropy Δs when 3.4 g of diethyl ether condenses at 34.6 °C is 4.1 J/K.

Enthаlpy (H) is defined аs the аmount of energy releаsed or аbsorbed during а chemicаl reаction. Entropy (S) defines the degree of rаndomness or disorder in а system.

The relаtionship between both pаrаmeters is given аs;

ΔS = ΔH ÷ T

ΔH = 26.7 KJ/mol for 1 mol of diethyl ether

number of moles = mаss ÷ molаr mаss

number of moles = 3.4 ÷ 72 = 0.04722

ΔH = 26700 × 0.04722 = 1260.77 J

T = 34.6 + 273 = 307.6 (upon converting to Kelvin temperаture)

ΔS = 1260.77 ÷ 307.6

ΔS = 4.1 J/K

Your question is incomplete, but most probably your full question can be seen in the Attachment.

For more information about entropy refer to the link:

https://brainly.com/question/13146879

#SPJ4

Calculate the mass in grams of each sample.

3. 4. 62 mol of (NH4)2SO3

Answers

Molar mass of (NH4)2SO3 is  116.14 g/mol.(NH4)2SO3 is ammonium sulfite.mass of (NH4)2SO3 is 535.92g

Ammonia and sulphur dioxide in an aqueous solution can react to form ammonium sulfite:

2 NH3 + SO2 + H2O → (NH4)2SO3

mass=no.of moles*molecular weight

molar mass of (NH4)2SO3 =116.14 g/mol

mass=4.62*116

mass=535.92g

Gas scrubbers made of ammonium hydroxide, which are now antiquated, create ammonium sulfite to remove sulphur dioxide from power plant emissions. The Walther Process' foundation is the conversion. Ammonium sulphate can be produced by air oxidising the resultant ammonium sulfite.Sulfite of ammonium is a reducing agent. As it heats up and begins to decompose, it releases sulphur dioxide and nitrogen oxides.

learn more about ammonium sulfite Refer:brainly.com/question/14535501

#SPJ4

consider chlorine, which occurs as a mixture of two isotopes: chlorine-35, with a natural abundance of 75.8% and an exact mass of 34.97 amu and chlorine-37, with a natural abundance of 24.2% and an exact mass of 36.97 amu. what is the average atomic mass of chlorine? report to two decimal places.

Answers

If the natural abundance of chlorine-35 is 75.8% and that of chlorine-37 is 24.2%, then the average atomic mass of chlorine will be 35.44 amu.

Chlorine exists in two isomeric forms which are the chlorine-35 and chlorine-37. The atomic mass of the chlorine elements is basically the average atomic mass of its isotopes depending upon their abundance in nature.

The atomic mass of chlorine-35 is 34.97amu and a natural abundance equal to 75.8 %. The atomic mass of chlorine-37 is equal to 36.97 amu with an abundance of 24.2%.

To calculate the average atomic mass of chlorine,

The abundance of chlorine-35 = 75.8% = 0.758

The abundance of chlorine-37 = 24.2% = 0.242

⇒ Average atomic mass = 34.97 × 0.758 + 36.97 × 0.242

⇒ Average atomic mass = 26.50 + 8.94

⇒ Average atomic mass = 35.44 amu  

To know more about chlorine here

https://brainly.com/question/11008051

#SPJ4

25.00 cm³ of the hydrochloric acid reacted with 23.50 cm³ of the 0.100 mol/dm³
barium hydroxide solution.
The equation for the reaction is:
2 HCl(aq) + Ba(OH)2(aq) → BaCl₂(aq) + 2H₂O(1)
Calculate the concentration of the hydrochloric acid in mol/dm³.

Please help!!

Answers

Answer:

0.111 moldm⁻³

First work out the moles of NaOH dispensed from the burette:

1. (25.0/1000)x0.100 = 0.00250 moles of HCl

Next use the balanced equation to reason how many moles of HCl are present in the flask:

2. 1:1 therefore 0.00250 moles NaOH

Lastly, now that you have both the volume and the number of moles of HCl, work out its concentration.

3. 0.0025/(22.5/1000) = 0.111 moldm⁻³

Explanation:

Answer:

The concentration of the hydrochloric acid is 0.00047 mol/dm³.

Explanation:

The balanced equation for the reaction is:

2 HCl(aq) + Ba(OH)2(aq) → BaCl₂(aq) + 2H₂O

We know that 25.00 cm³ of the hydrochloric acid reacted with 23.50 cm³ of the 0.100 mol/dm³ barium hydroxide solution.

Given the balanced equation, it is clear that 2 moles of hydrochloric acid react with 1 mole of barium hydroxide. As we know the volume and concentration of the barium hydroxide, we can calculate the number of moles of barium hydroxide present in the 23.50 cm³ of solution.

23.50 cm³ of 0.100 mol/dm³ barium hydroxide = (23.50 x 0.100) / 1000 = 0.00235 moles

As 2 moles of hydrochloric acid react with 1 mole of barium hydroxide, and we know the number of moles of barium hydroxide, we can calculate the number of moles of hydrochloric acid.

0.00235 moles of barium hydroxide / 2 = 0.001175 moles hydrochloric acid

We have the number of moles of hydrochloric acid, we can calculate the concentration in mol/dm³.

0.001175 moles hydrochloric acid / 25.00 cm³ = 0.00047 mol/dm³

The concentration of the hydrochloric acid is 0.00047 mol/dm³.

suppose your original tea happened to be a 10% solution of sucrose, and your pot contained 500 ml of tea. you diluted it with 200 ml of water. you now have 700 ml of tea. but what is the new concentration?

Answers

The new concentration of sucrose in the tea is 7.14%.

When a solution is diluted, the number of moles of solute (in this case, sucrose) remains constant, while the number of liters of solvent (in this case, water) increases. Therefore, the concentration of the solute decreases.

To calculate the new concentration, you would divide the number of moles of sucrose by the number of liters of the final solution (700 ml). In this case, the original solution was a 10% solution of sucrose, so it contained:

10/100 × 500 = 50 grams of sucrose.

After dilution with 200 ml of water, the new solution contains:

50/700 × 100% = 7.14%.

Therefore the new concentration is 7.14%

To learn more about sucrose visit: https://brainly.com/question/30313287

#SPJ4

If 19. 4 grams of ammonium chloride are used, how many grams of water are

theoretically produced?

O 25. 73 g

6. 53 g

9. 55 g

10. 63 g

Con

Answers

If 19.4 grams of ammonium chloride are used, option D (10.63 g) of water are theoretically produced.

The balanced equation for the reaction between ammonium chloride and water is:

NH4Cl + H2O ---> NH3 + HCl

From the balanced equation, we can see that for every 1 mole of NH4Cl, 1 mole of H2O is produced.

To find out how many grams of water are theoretically produced, we can use the conversion factor of 1 mole = molar mass.

The molar mass of NH4Cl is (114.01 + 41.01) = 18.05 g/mol

19.4 g of NH4Cl is equal to 19.4/18.05 = 1.07 mol

So, theoretically 1.07 mol of H2O is produced, which is equal to the molar mass of H2O (18.02 g/mol) x 1.07 mol = 19.37 grams of water.

So, the answer is 19.37g of water.

Therefore, The correct answer is 19.37g, but option D (10.63 g) is the nearest correct answer as the question given.

To know more about ammonium chloride please refer: https://brainly.com/question/23387600

#SPJ4

volume displacement is used to determine the volume of an irregularly shaped metal sample. the gradauted cylinder initially contains 23.6 ml of water. after the metal sample is added to the graduated cylinder, the volume is 29.8 ml . what is the volume of the metal sample?

Answers

The volume of the metal sample is 6.2 ml

The theory behind this is that the volume of the metal is what causes the increase in water volume in the cylinder.

This means that by comparing the volume occupied by the water and metal together and the amount occupied by the water alone in the cylinder, you can determine the volume of the metal.

To be more specific, the volume of the metal will be,

Vmetal= Vwater + metal - Vwater

In this case, we have

Vwater = 23.6 ml

Vwater + metal = 29.8 ml

So,

Vmetal = 29.8 ml - 23.6 ml = 6.2 ml

Thus the volume of the metal sample is 6.2 ml.

To learn more about volume displacement visit,

https://brainly.com/question/17322215

#SPJ4

A container holds a mixture of gases. Gas A has a partial pressure

of 453. 9 mmHg. Gas B has a partial pressure of 287. 6 mmHg. Gas

C has a partial pressure of 382. 4 mmHg. What is the total

pressure of the gases inside the container?

Answers

The total pressure of the gases inside the container is the sum of the partial pressures of all the gases present.

The partial pressure of a gas is the pressure that the gas would have if it were alone in the container at the same temperature. In this case, the container holds three gases: Gas A, Gas B, and Gas C. The partial pressures of Gas A, Gas B, and Gas C are given as 453.9 mmHg, 287.6 mmHg, and 382.4 mmHg, respectively. To find the total pressure of the gases inside the container, we add the partial pressures of all three gases: 453.9 mmHg + 287.6 mmHg + 382.4 mmHg = 1123.9 mmHg. Therefore, the total pressure of the gases inside the container is 1123.9 mmHg.

To know more about pressure click here:

https://brainly.com/question/12971272#

#SPJ4

how many moles in 85 grams of calcium

Answers

Mole present in 85 grams of calcium is 2.12 moles

It is given that

given mass of calcium = 85 grams

molar mass of calcium = 40 grams

We have to find the moles

The mole is the amount of substance of a system which contains as many elementary entities as there are atoms in 0.012 kilogram of carbon 12, its symbol is “mol”

moles = given mass/molar mass

moles = 85 gram/40 gram

moles = 2.12

Hence, moles in 85 grams of calcium is 2.12 moles

Learn more about Moles here:

https://brainly.com/question/15356425

#SPJ1

Other Questions
after the 3-d prototype was manufactured, the tolerances requested for the prototype part were reduced. the problem-solving steps to accommodate the new tolerances are out of order as shown.rearrange the steps to show the most accurate and efficient problem-solving order, placing the first step at the top and the last step at the bottom. Solve using substitution. Y=1 -3x+4y=-20 TRUE/FALSE. During the 15th century, the sackbut was commonly performed at outdoor gatherings during Renaissance period. In January 2016, Wanda transferred machinery worth $200,000 (basis of $30,000) to a controlled corporation, Oriole, Inc. , in a transfer that qualified under $351. Wanda had deducted depreciation on the machinery in the amount of $165,000 when she held the machinery for use in her proprietorship. Later in 2016, Oriole sells the machinery for $190,000. What are the tax consequences to Wanda and to Oriole on the sale of the machinery? if good x is measured on the horizontal axis and good y on the vertical, what can you say about the preferences of someone whose indifference curves are parallel to the y axis? positively sloped with more desirable indifference curves as one moves to the right? negatively sloped with more desirable indifference curves as one moves to the left? Answer Choices:A: y=2x+4B: HELP I CANT FIGURE THIS OUT. Which math expression means "the difference of 150 and 99"? A. 150 99 B. 150 - 99O C. 150 - 99 D. 150 + 99 Given that 5 x : 9 = 8 : 3 Calculate the value of x . Give your answer in its simplest form. according to the law of large numbers How does expansion and innovation effect a nations identity? Give 2 pieces of textual evidence According to the Time Traveller in The Time Machine, what is the fourth dimension?A. LengthB. BreadthC. AwarenessD. Time a bullet is accelerated down the barrel of a gun. the average force exerted on a 0.020 kg bullet to accelerate it to a speed of 500.0 m/s in a time of 2.00 ms (milliseconds) is which of the following is the smallest 1:35 0001:50 000 The governor organized an elaborate party to start his in fancy clothes. TRUE OR FALSE when deciding to make or buy a part needed for the manufacturing process, management needs to consider whether the plant has excess production capacity available to make the part or if current production will need to be interrupted to manufacture the part. jack and jill were married for 12 years and resided in a common law state before jack had a fatal accident. they were happily married for the first eight years before a devastating disagreement that led them to live separate lives even though they remained married. since jack was mad at jill at the time he created his estate plan, he left jill a lump sum of $50,000 of his $9,000,000 estate and named his two children as the beneficiaries of the remainder of his estate. since jill's estate was valued at only $1,000,000, she was very disappointed at her minimal inheritance. she took the $50,000 when it was distributed to her by the personal representative, and then later informed the personal representative, in writing, that she is electing to use her state's spousal elective share statute. the personal representative correctly informed jill that she was not eligible to elect the spousal elective share statute. which one of the following statements identifies why jill is not allowed to make the election? a) jill cannot make the election to receive the spousal elective share because her children are the beneficiaries of the remaining estate and they are entitled to elect the family allowance statute. b) jill cannot make the election to receive the spousal elective share because such a distribution would increase the estate tax due on jack's estate. c) jill cannot make the election to receive the spousal elective share because she does not live in a community property state. d) jill cannot make the election to receive the spousal elective share because she already accepted the $50,000 distribution from jack's will. When certain stories become popular, readers want to find out where certain characters came from. It is a way to explain how the characters of a popular story arrived at the start of the first story. It gives the reader more background on some of the favorite characters. 3 Which opening sentence goes best with the details in the above paragraph? A. This method had become more popular in the last 10 years, proving how readers have become more interested. B. It allows the reader to better understand their favorite characters and to learn why they act the way they act. C. Many popular stories lately have introduced "prequels", or events that happened before the original story. D. When readers become interested in certain popular characters, they enjoy reading more about the characters. Describe at least three of the things that helped cause the fighting of the Vivek war Point d is the center of the inscribed circle of abc. which step can you use to draw the inscribed circle of abc? a. draw arcs of equal lengths intersecting , , and in two points each. b. draw the perpendicular bisectors of , , and that pass through point d. c. label a point e on and draw a line joining e with d. d. draw a line through d that is perpendicular to one of the sides, , , or . e. draw one arc each on and , and find their point of intersection. suppose that someone made a graph of sat scores from 100 randomly selected students from the state of florida. standardized test scores like those for the sat are derived from the students' raw scores (number of questions answered correctly) and adjusted for slight differences in difficulties between versions. what shape would you expect the histogram of this data to be?