Which of the following is NOT part of some
active regions on the Sun?



Prominences
Plages
sunspot
flares
granulation

Answer:

Explanation:

a) Spring Constant

b) Amplitude of the oscillation

c)Frequency o the oscillation

Answer: acceleration = -1.68 m/s^2

Explanation: First, you need to convert the speeds to meters per second (m/s) since acceleration is typically measured in m/s^2.

2.0 km/hr = 0.56 m/s

0.5 km/hr = 0.14 m/s

Next, you use the formula for acceleration: acceleration = (final velocity - initial velocity) / time

Plugging in the values, we get: acceleration = (0.14 m/s - 0.56 m/s) / 0.25 hr

acceleration = (-0.42 m/s) / 0.25 hr

acceleration = -1.68 m/s^2

The speed of the moving train is approximately 33.5 m/s.

The beat frequency is given by the difference in frequency between the two horns, which is equal to the Doppler shift in frequency due to the motion of the moving train. Using the formula for the Doppler effect, we can solve for the speed of the train:

[tex]f_b = f_s\dfrac{(v + v_o)}{(v + v_s)}[/tex]

where [tex]f_b[/tex] is the beat frequency, [tex]f_s[/tex] is the horn frequency, v is the speed of sound, [tex]v_o[/tex] is the observer's speed, and [tex]v_s[/tex] is the speed of the source.

We know that [tex]f_s[/tex] = 410 Hz and [tex]f_b[/tex] = 35 Hz. The speed of sound in air at standard temperature and pressure is approximately 343 m/s. Since the observer is stationary, [tex]v_o[/tex] = 0.

Solving for [tex]v_s[/tex], we get:

[tex]v_s = \dfrac{(f_s + f_b)}{f_s - 1} \times v[/tex]

[tex]v_s[/tex] = ((410 Hz + 35 Hz) / 410 Hz - 1) * 343 m/s

[tex]v_s[/tex] = 33.5 m/s

To know more about frequency, here

brainly.com/question/29664449

#SPJ1

Micah and Lyra have different near points and are inspecting an object through the same magnifier. Micah's near point is farther away from his eye compared to Lyra's near point. Micah will experience a larger magnification for the following reasons:

1. Micah's longer near point distance allows him to see the object more clearly through the magnifier, which increases the perceived magnification.

2. Since both are using the same magnifier, the lens properties remain constant. However, Micah's farther near point effectively increases the distance between the object and his eye, resulting in a larger magnification due to the increased distance.

In summary, Micah experiences a larger magnification because his near point is farther away from his eye, allowing him to see the object more clearly and at an effectively greater distance through the magnifier.

To know more about the magnification refer here :

https://brainly.com/question/31595015#

#SPJ11

Spheres A and B have the same mass and radius but are composed of different materials. Sphere B has a denser core and a less dense shell.

Comparing the moment of inertia of spheres A and B. Given that both spheres A and B have identical mass and radius, but sphere B has a more dense core and a less dense shell, we can determine the relationship between their moments of inertia about their centers of mass.

To do this, we'll use the following equation for the moment of inertia of a solid sphere: I = (2/5)MR², where M is the mass of the sphere, R is its radius, and I is its moment of inertia.

For sphere A (uniform density), its moment of inertia can be calculated as:
Ia = (2/5)MaRa²

For sphere B (non-uniform density with a denser core), its moment of inertia can also be calculated using the same equation, but since it has a more dense core and a less dense shell, its moment of inertia will be smaller than that of sphere A. This is because the mass is distributed closer to the center, which reduces the moment of inertia.

So, comparing the moments of inertia for spheres A and B:
Ia > Ib

Thus, the correct answer is (a): Ia > Ib.

To know more about the moment of inertia refer here :

https://brainly.com/question/30051108#

#SPJ11

(a) The kinetic energy of the carbon nucleus is equal to the absorbed photon's energy.

(b) The energy of the emitted photon is equal to the initial kinetic energy of the carbon nucleus.

(a) To calculate the kinetic energy of the carbon nucleus, we need to use the principle of conservation of momentum. Since the carbon nucleus is initially at rest, its momentum is zero.

When it absorbs the 15 MeV photon, the recoil momentum of the carbon nucleus will be 15 MeV/c. We can convert this momentum into kinetic energy using the equation:

Kinetic Energy = (recoil momentum)^2 / (2 * mass of carbon nucleus)

The mass of a carbon nucleus (approximately 12 atomic mass units) is 12 times the mass of a proton, which is approximately 1.67 × 10^-27 kg. By substituting these values into the equation, we can find the kinetic energy of the carbon nucleus.

(b) After the carbon nucleus comes to rest, it can lose its internal energy by emitting a photon. The energy of this photon will be equal to the internal energy of the nucleus.

Since the internal energy of the nucleus is equal to the kinetic energy it possessed before coming to rest, we can use the value calculated in part (a) as the energy of the emitted photon.

For more such questions on kinetic energy , click on:

https://brainly.com/question/8101588

#SPJ11

Answer:

An active galaxy emits up to thousands of times more energy than a normal galaxy and long jets of gas can spew forth from the galaxy at nearly the speed of light.

Explanation:

       A normal galaxy has a dormant super massive black hole at the center, and it is at a sleeping state after being fed on gas and matter. Whereas an active galaxy also has a super massive black hole at the center and is constantly feeding on gas, matter, stars and other things.

      Active galaxies are either quasars, blazars, or radio galaxies. They are significantly more luminous than a normal galaxy because they produce more electro-magnetic radiations across the spectrum from x-rays to radio waves.

      Active galaxies have shown to have a smaller number of star forming regions than normal galaxies because of the active nature of the AGN at the center causes high amounts of electromagnetic radiation which disturbs the star forming regions and it would take so much time to form new stars.

https://brainly.com/question/31711955: Click here for more information.

To find the moment of inertia of a 4-kg connecting rod experimentally, first, the rod is suspended from a cord at point a while held horizontally. A piezoelectric sensor located at point b records a force of 14.6 N under this situation.

This force measurement can be used to determine the location of the center of mass, g, of the connecting rod.

Next, the cord is cut, and the force at point b drops to 9.3 N in that instant. This measurement can be used to calculate the moment of inertia for the connecting rod. The change in force is due to the sudden drop in the rod's potential energy as it falls.

The force of gravity acting on the rod can be calculated using the mass and acceleration due to gravity. The distance between point b and the center of mass g can be calculated using the previous force measurement and the weight of the rod.

With these values, the moment of inertia is of the connecting rod can be calculated using the formula for the moment of inertia of a rigid body rotating about a fixed axis.

To know more about center of mass refer here:

https://brainly.com/question/28996108#

#SPJ11

The theory of the Moon's origin that best fits with the current scientific understanding is c. a large object hit the Earth and the collision produced a filament of material that condensed to make the Moon. This theory is known as the Giant Impact Hypothesis and is currently the most widely accepted explanation for the formation of the Moon.

It proposes that a Mars-sized body collided with the Earth about 4.5 billion years ago, creating a massive impact that ejected a large amount of material into space. This material then formed a ring around the Earth, which eventually condensed to form the Moon.

This theory is supported by several lines of evidence, including the similar isotopic composition of the Earth and Moon, the Moon's low iron content, and the presence of water on the Moon that is thought to have originated from the Earth's mantle.

To know more about the Moon's origin refer here :

https://brainly.com/question/13047403#

#SPJ11

Comets are believed to be loosely consolidated, fluffy mixtures of ice and rock based on several lines of evidence and observations: Cometary activity: Comets exhibit activity when they approach the Sun,

such as the formation of a coma (a glowing coma or "atmosphere" surrounding the nucleus) and a tail that points away from the Sun. This activity is thought to be caused by the sublimation of ices (such as water, carbon dioxide, and other volatile compounds) from the nucleus, where they transition directly from solid to gas without passing through a liquid phase. This suggests that comets contain a significant amount of volatile ices that can readily vaporize when exposed to sunlight, indicating a relatively low density and loose composition.

Comet structure: Observations of comets that have been visited by spacecraft, such as Comet Halley (visited by the European Space Agency's Giotto spacecraft in 1986) and Comet Wild 2 (visited by NASA's Stardust spacecraft in 2004), have revealed their structure to be porous and loosely consolidated. Images and data from these missions show a rough and irregular surface with cliffs, boulders, and pits, which suggest a "fluffy" or loosely bound structure.

Comet composition: Analysis of the dust and gas particles emitted by comets during their active phases has provided insights into their composition. The presence of water ice, carbon dioxide, and other volatile compounds in cometary samples collected by spacecraft, as well as spectroscopic observations of comets from telescopes,

Learn more about  rock    here:

https://brainly.com/question/19930528

#SPJ11

The work done on the mass by the applied force f is approximately 0.052 J.

For more such question on mass

https://brainly.com/question/86444

#SPJ11

Answer:

D. Jupiter

Explanation:

The largest planet in the solar system is Jupiter (by Mass)

The speed of light in furlongs per fortnight is approximately 1.802 x 10¹² furlongs/fortnight.

We can start by converting meters to furlongs and seconds to fortnights.

1 meter = 1/201.17 furlongs (since 1 furlong = 220 yards and 1 yard = 0.9144 meters)

1 second = 1/1,209,600 fortnights (since 1 day = 24 hours, 1 hour = 60 minutes, 1 minute = 60 seconds, and 1 fortnight = 14 days)

Using these conversions, we have:

Speed of light = 2.998 x 10⁸ m/s

= (2.998 x 10^⁸ m/s) x (1/201.17 furlongs/m) x (86,400 s/day) x (1 day/14 fortnights)

= 1.802 x 10^¹² furlongs/fortnight

Therefore, the speed of light in furlongs per fortnight is approximately 1.802 x 10^¹² furlongs/fortnight.

Learn more about conversions

https://brainly.com/question/3477680

#SPJ4

Answer:

Most meteoroids are small fragments of rock created by asteroid collisions. Comets also create meteoroids as they orbit the sun and shed dust and debris. When a meteoroid enters Earth's upper atmosphere, it heats up due to friction from the air.

Explanation:

Hope this helped! Please mark me brainliest!

Answer:

Most meteoroids are small fragments of rock created by asteroid collisions. Comets also create meteoroids as they orbit the sun and shed dust and debris. When a meteoroid enters Earth's upper atmosphere, it heats up due to friction from the air.

Explanation:

A secondary group is impersonal and goal-oriented in contrast to a major group. It only touches a small portion of its members' life. Secondary organizations arise to carry out a particular task.

Larger and more impersonal secondary groups are frequent. Additionally, they could be time- and task-limited. The roles of these groups are more goal- or task-oriented than emotional, serving an instrumental purpose as opposed to an expressive one. A secondary group can be one's coworkers or other classmates.

To learn more about secondary group, click:

https://brainly.com/question/30854001

#SPJ1

The planet with an axis that points roughly straight up and thus has no seasons to speak of is Uranus. This unique orientation of Uranus' axis causes its poles to receive almost the same amount of sunlight all year round, resulting in a lack of seasonal variation.

While all the giant planets experience some level of seasonal changes, Uranus stands out as having the most extreme lack of seasonal variation due to its axial tilt.

It's important to note that the other giant planets (Jupiter, Saturn, and Neptune) all have dramatically different seasons due to their axial tilts, which are not as extreme as Uranus'. Jupiter and Saturn have noticeable seasons, but they are less dramatic than those experienced on Earth. Neptune also has seasonal variations, but due to its great distance from the Sun, these changes are less pronounced than those on Uranus.

Learn more about planet here:-

https://brainly.com/question/14581221

#SPJ11

Using the impulse-momentum theorem, the sled takes 1.46 seconds to travel from point A to point B.

The impulse-momentum theorem relates the impulse acting on an object to its change in momentum. In this problem, we can use this theorem to determine the time it takes for the sled to travel from point A to point B.

First, we need to determine the change in momentum of the sled as it moves from point A to point B. We can do this using the formula:

Δp = mΔv

where Δp is the change in momentum, m is the mass of the sled, and Δv is the change in velocity of the sled.

Δp = mΔv

Δp = m(vB - vA)

Δp = (m)(4.8 m/s - 7.6 m/s)

Δp = -3.6m

The negative sign indicates that the sled is losing momentum as it moves from point A to point B.

Next, we can use the impulse-momentum theorem to relate the change in momentum to the impulse acting on the sled. The impulse is given by the formula:

J = Δp

where J is the impulse.

J = Δp

J = -3.6m

Now, we can use the definition of impulse to relate it to the force acting on the sled and the time it takes for the force to act. The force is given by:

F = ma

where F is the force, m is the mass of the sled, and a is the acceleration of the sled.

The force of kinetic friction acting on the sled is given by:

Ff = μkN

where Ff is the force of friction, μk is the coefficient of kinetic friction, and N is the normal force acting on the sled.

Since the sled is moving horizontally, the normal force is equal to the weight of the sled:

N = mg

where g is the acceleration due to gravity.

Now, we can combine these equations to solve for the time it takes for the sled to travel from point A to point B:

J = FΔt

-3.6m = μkNΔt

-3.6m = μkmgΔt

Δt = -3.6m / (μkmg)

Substituting the given values, we get:

Δt = -3.6m / (0.25)(m)(9.81 m/s²)

Δt = -1.46 s

Since the time cannot be negative, we take the absolute value of the result:

Δt = 1.46 s

Therefore, the sled takes 1.46 seconds to travel from point A to point B.

To know more about impulse-momentum theorem, refer to the link below:

https://brainly.com/question/14121529#

#SPJ11

To levitate the foil, the laser beam must exert enough radiation pressure to counteract the force of gravity on the foil. This radiation pressure is proportional to the intensity of the laser beam, which can be related to its power using the formula:

power = intensity x area

Assuming that the laser beam is circular and has a radius r, the area it covers on the foil is πr^2. Therefore, the power needed to levitate the foil can be expressed as:

p = (mg) / (πr^2)

where m is the mass of the foil, g is the acceleration due to gravity, and π is a constant.

This expression shows that the power needed to levitate the foil is directly proportional to its mass, and inversely proportional to the area covered by the laser beam. This makes intuitive sense, as a larger laser beam will spread the radiation pressure over a larger area, making it less effective at levitating the foil.

In practice, other factors such as the reflectivity of the foil and the absorption properties of the laser beam will also affect the power required to levitate it. However, the above expression provides a good starting point for understanding the basic physics of laser levitation.

learn more about the force of gravity here: brainly.com/question/29236134

#SPJ11

Starting with the given phase expression:

wt - βz

We can take the time derivative of this expression to derive the velocity expression:

d/dt (wt - βz) = w d/dt t - β d/dt z

Since d/dt t = 1 and there is no explicit time dependence on β, this simplifies to:

d/dt (wt - βz) = w - β(dz/dt)

Recall that the wave speed is given by the ratio of the angular frequency to the wave number, i.e. v = w/β. We can use this relationship to rewrite the above expression:

d/dt (wt - βz) = vβ - v(dz/dt)

Simplifying, we get:

d/dt (wt - βz) = -v(dz/dt) + vβ

Therefore, the velocity expression is:

v = -d/dt (wt - βz) / (dz/dt) + β

which can be further simplified to:

v = -dw/dβ + β

This is the velocity expression in terms of the wave frequency and wave number.

Learn more about expression,

https://brainly.com/question/5102661

#SPJ4

Answer:

Explanation:

kinetic energyu inmcrease

The Sun and Moon's gravitational pull has an effect on the tides that affect coastal areas on Earth. High tides are got on by the Moon's bulge of water on the Earth's side that faces the Moon as it circles the Earth.

On the contrary side of the Earth, there is one more lump of water brought about by the divergent power created by the Earth-Moon framework, which likewise prompts elevated tides. There are low tides in the areas in between.

The hypothetical locations of the Moon in relation to the Earth and the Sun, as well as the kind of tide that would affect Earth's coastal areas, are as follows:

Moon New: Between the Sun and Earth is the Moon. As a result, there is a spring tide with high and low tides.

Waxing Bow Moon: The Moon is to the east of the Sun and is partially illuminated. A moderate spring tide is the result of this.

Quarter Moon at First: The Moon is perpendicular to the Sun and only partially illuminated. As a result, the high tides are lower and the low tides are higher during a neap tide.

Gibbous-Waxing Moon: The Moon, which lies to the east of the Sun and receives the majority of its light, A moderate spring tide is the result of this.

New Moon: The Sun and the Moon are on opposite sides of the Earth. As a result, there is a spring tide with high and low tides.

Gibbous-waning Moon: The Moon, lies to the west of the Sun and receives the majority of its light, A moderate spring tide is the result of this.

To learn more about Moon's gravitational here

https://brainly.com/question/13467280

#SPJ4

The correct answer is B) 6.04A. In a rectifier circuit, the current output is directly proportional to the voltage input, according to Ohm's Law (V = IR), where V is voltage, I is current, and R is resistance.

Given:

Voltage input (before doubling): 5.9V

Current output: 3.02A

If the voltage output of the rectifier doubles, the new voltage output would be 5.9V x 2 = 11.8V (assuming all else remains equal).

Using the current-voltage relationship, we can calculate the new current output:

I = V/R

Where V is the new voltage output (11.8V) and R is the resistance of the rectifier circuit (which remains constant in this case).

Plugging in the values:

I = 11.8V / R

Since we do not have information about the resistance of the rectifier circuit, we cannot determine the exact value of the new current output. Therefore, the correct answer is D) not enough information.

Learn more about   current   here:

https://brainly.com/question/13076734

#SPJ11

The wave on the string is moving at a pace of 70.7 m/s.

A wave is an energetic disturbance in a medium that doesn't include any net particle motion. Elastic deformation, a change in pressure, an electric or magnetic intensity, an electric potential, or a change in temperature are a few examples.

The speed of a wave on a string can be calculated using the formula:

v = √(T/μ)

where v is the speed of the wave, T is the tension in the string, and μ is the linear density of the string (mass per unit length).

We are given that the string has a total length of 5 m and a total mass of 0.01 kg, so the linear density can be calculated as:

μ = m/length = 0.01 kg / 5 m = 0.002 kg/m

We are also given that the tension in the string is 10 N. Substituting these values into the formula, we get:

v = √(T/μ) = √(10 N / 0.002 kg/m) = √(5000 m^2/s^2)

Simplifying this expression, we get:

v = 70.7 m/s

Therefore, the speed of the wave on the string is 70.7 m/s.

Learn more about speed of wave on:

https://brainly.com/question/464617

#SPJ11

In this experiment to investigate the specific heat capacity of iron, it is important to identify the independent variables that were held constant throughout the trials.

The mass of water and the mass of the iron sample are examples of quantities that were held constant, as they were always 175g and 75g respectively. The initial temperature of the water was also held constant at 20°C. However, the initial temperature of the iron sample varied in each trial, with options of 30°C, 40°C, 60°C, or 80°C.

Therefore, the initial temperature of the iron sample is not an example of a quantity that was held constant.

The final temperature of the mixture of water and iron is also not a quantity that was held constant, as it was recorded as the dependent variable and varied depending on the initial temperature of the iron sample.

By holding certain variables constant, the experiment can be conducted more accurately and effectively to investigate the specific heat capacity of iron.

To know more about  initial temperature refer here:

https://brainly.com/question/16257814#

#SPJ11

The grinding wheel stops turning after 6.10 seconds.

Angular Acceleration is defined as the time rate of change of angular velocity. It is usually expressed in radians per second per second.

To solve this problem, we can use the following kinematic equation:

ωf = ωi + αt

where:

ωi = initial angular velocity

ωf = final angular velocity (zero in this case, since the motor is switched off)

α = angular acceleration (constant negative value in this case)

t = time

We want to find the time it takes for the grinding wheel to come to a stop, so we can rearrange the equation to solve for t:

t = (ωf - ωi) / α

Since ωf = 0 and ωi = (1.20 x 10² rev/min) x (2π rad/rev) / (60 s/min) = 12.57 rad/s, we can substitute these values into the equation:

t = (0 - 12.57) / (-2.06) = 6.10 s

Therefore, it takes 6.10 seconds for the grinding wheel to come to a stop.

Learn more about angular acceleration on:

https://brainly.com/question/21278452

#SPJ11

The grinding wheel stops turning after 6.10 seconds.

Angular Acceleration is defined as the time rate of change of angular velocity. It is usually expressed in radians per second per second.

To solve this problem, we can use the following kinematic equation:

ωf = ωi + αt

where:

ωi = initial angular velocity

ωf = final angular velocity (zero in this case, since the motor is switched off)

α = angular acceleration (constant negative value in this case)

t = time

We want to find the time it takes for the grinding wheel to come to a stop, so we can rearrange the equation to solve for t:

t = (ωf - ωi) / α

Since ωf = 0 and ωi = (1.20 x 10² rev/min) x (2π rad/rev) / (60 s/min) = 12.57 rad/s, we can substitute these values into the equation:

t = (0 - 12.57) / (-2.06) = 6.10 s

Therefore, it takes 6.10 seconds for the grinding wheel to come to a stop.

Learn more about angular acceleration on:

brainly.com/question/21278452

#SPJ11

The determine the temperature increase needed for the square steel bar in fig 3.6-3 to be stress-free when attached to the rigid wall at points A and B, we need to consider the following steps Identify the dimensions and material properties of the square steel bar, such as length, cross-sectional area, coefficient of thermal expansion, and modulus of elasticity.

The Determine the initial temperature of the steel bar, usually denoted as T1. Set up an equation to describe the relationship between the change in length (ΔL) of the steel bar and the temperature change (ΔT). The equation is ΔL = α × L × ΔT where ΔL is the change in length, α is the coefficient of thermal expansion, L is the initial length of the bar, and ΔT is the temperature change. Since we want the bar to be stress-free when attached to the wall, the change in length (ΔL) should be equal to the allowable deformation or strain of the material, which can be calculated using the modulus of elasticity (E) and the applied stress (σ). Substitute the calculated strain for ΔL in the equation from step 3 and solve for ΔT ΔT = (ΔL) / (α × L) Finally, add the initial temperature (T1) to the temperature change (ΔT) to obtain the required final temperature (T2) for the bar to be stress-free T2 = T1 + ΔT Using this step-by-step method, you can determine the temperature increase needed for the square steel bar to be stress-free when attached to the rigid wall at points A and B.

learn more about steel bar here.

https://brainly.com/question/1459838

#SPJ11

Maximum amplitude = (0.50 * 9.8 m/[tex]s^2[/tex]) / (2π * 2.0 Hz)[tex]^2[/tex] ≈ 0.249 m

To prevent the block from slipping along the surface, the maximum amplitude of the simple harmonic motion (SHM) can be determined by considering the maximum value of the centripetal acceleration acting on the block.

The centripetal acceleration required to prevent slipping is given by:

ac = ω^2 * R

where ω is the angular frequency of the SHM and R is the amplitude of the motion.

The maximum static friction force (fs) can be calculated using the coefficient of static friction (μs) and the normal force (N) acting on the block. In this case, the normal force is equal to the weight of the block (mg).

fs = μs * N = μs * mg

Since the centripetal acceleration is provided by the friction force, we have:

ac = fs / m = (μs * mg) / m = μs * g

Setting the centripetal acceleration equal to the maximum value, we get:

μs * g = ω^2 * R

Solving for R:

R = (μs * g) / ω^2

Substituting the given values, with μs = 0.50, g = 9.8 m/s^2, and ω = 2π * 2.0 Hz, we can calculate R:

R = (0.50 * 9.8 m/s^2) / (2π * 2.0 Hz)^2 ≈ 0.249 m or 24.9 cm

Therefore, the maximum amplitude of the SHM can be approximately 24.9 cm to prevent the block from slipping along the surface.

For more such questions on amplitude, click on:

https://brainly.com/question/3613222

#SPJ11

The tungsten metal's ability to expel electrons has a maximum threshold wavelength of 462.5 nm.

When a substance absorbs electromagnetic radiation, a phenomenon known as the photoelectric effect causes electrically charged particles to be discharged from or within the material.

We can use the photoelectric effect equation to solve this problem:

E = hf - Φ

where:

E = maximum kinetic energy of the ejected electron

h = Planck's constant

f = frequency of the incident radiation

Φ = work function of tungsten (the energy required to remove an electron from the metal)

We can convert the given wavelength a = 2000 Å to frequency using the speed of light c:

f = c / λ = c / (a × 10⁻¹⁰ m) = (3.00 × 10⁸ m/s) / (2000 × 10⁻¹⁰ m) = 1.50 × 10¹⁵ Hz

Now we can substitute the values given into the photoelectric effect equation:

1.64 eV = (6.63 × 10⁻³⁴ J·s)(1.50 × 10¹⁵ Hz) - Φ

Solving for the work function Φ:

Φ = (6.63 × 10⁻³⁴ J·s)(1.50 × 10¹⁵ Hz) - 1.64 eV = 4.30 × 10⁻³⁴ J

The threshold frequency or wavelength is the one where the energy of the photon is just enough to overcome the work function and eject the electron. This occurs when the maximum kinetic energy of the ejected electron is zero. Setting E = 0 in the photoelectric effect equation and solving for the corresponding frequency or wavelength:

0 = hf - Φ

f = Φ / h = 4.30 × 10⁻¹⁹ J / 6.63 × 10⁻³⁴ J·s = 6.49 × 10¹⁴ Hz

λ = c / f = (3.00 × 10⁸ m/s) / (6.49 × 10¹⁴ Hz) = 462.5 nm

Therefore, the threshold wavelength above which it will not be possible to eject electrons from tungsten metal is 462.5 nm.

Learn more about photoelectric effect on:

https://brainly.com/question/1408276

#SPJ11

The tungsten metal's ability to expel electrons has a maximum threshold wavelength of 462.5 nm.

When a substance absorbs electromagnetic radiation, a phenomenon known as the photoelectric effect causes electrically charged particles to be discharged from or within the material.

We can use the photoelectric effect equation to solve this problem:

E = hf - Φ

where:

E = maximum kinetic energy of the ejected electron

h = Planck's constant

f = frequency of the incident radiation

Φ = work function of tungsten (the energy required to remove an electron from the metal)

We can convert the given wavelength a = 2000 Å to frequency using the speed of light c:

f = c / λ = c / (a × 10⁻¹⁰ m) = (3.00 × 10⁸ m/s) / (2000 × 10⁻¹⁰ m) = 1.50 × 10¹⁵ Hz

Now we can substitute the values given into the photoelectric effect equation:

1.64 eV = (6.63 × 10⁻³⁴ J·s)(1.50 × 10¹⁵ Hz) - Φ

Solving for the work function Φ:

Φ = (6.63 × 10⁻³⁴ J·s)(1.50 × 10¹⁵ Hz) - 1.64 eV = 4.30 × 10⁻³⁴ J

The threshold frequency or wavelength is the one where the energy of the photon is just enough to overcome the work function and eject the electron. This occurs when the maximum kinetic energy of the ejected electron is zero. Setting E = 0 in the photoelectric effect equation and solving for the corresponding frequency or wavelength:

0 = hf - Φ

f = Φ / h = 4.30 × 10⁻¹⁹ J / 6.63 × 10⁻³⁴ J·s = 6.49 × 10¹⁴ Hz

λ = c / f = (3.00 × 10⁸ m/s) / (6.49 × 10¹⁴ Hz) = 462.5 nm

Therefore, the threshold wavelength above which it will not be possible to eject electrons from tungsten metal is 462.5 nm.

Learn more about photoelectric effect on:

brainly.com/question/1408276

#SPJ11

The gas state of a substance that is normally a solid or a liquid at room temperature occurs when the substance undergoes a phase change from solid or liquid to gas.

This phase change is known as sublimation for solids and evaporation for liquids. The temperature and pressure conditions at which sublimation or evaporation occurs depend on the substance's properties, such as its intermolecular forces and molecular weight. For example, dry ice (solid carbon dioxide) sublimes at -78.5°C and atmospheric pressure, while water (a liquid at room temperature) evaporates at 100°C and atmospheric pressure. The gas state of normally solid or liquid substances has many practical applications, such as in refrigeration, gas storage, and chemical synthesis.

Learn more about liquid ,

https://brainly.com/question/20922015

#SPJ4

The correct option is B, The best definition for hypothermia is "very low internal body temperature caused by cold temperatures." Hypothermia occurs when the body loses heat faster than it can produce heat, leading to a dangerously low body temperature.

Hypothermia is a medical condition that occurs when the body's core temperature drops below the normal range, usually below 95 degrees Fahrenheit (35 degrees Celsius). It is typically caused by exposure to cold temperatures for extended periods or immersion in cold water.

As the body loses heat faster than it can produce it, various symptoms may develop, including shivering, confusion, dizziness, fatigue, slurred speech, and clumsiness. In severe cases, hypothermia can lead to organ failure, coma, and even death. Treatment for hypothermia involves rewarming the body, either passively or actively, and providing supportive care to address any complications that may arise.

To learn more about Hypothermia visit here:

brainly.com/question/6552936

#SPJ4