Answer:
oxygen is a reactant.
Explanation:
Combustion is the reaction with atmospheric oxygen forming carbon dioxide and water. Therefore, the essential condition is option B oxygen as a reactant.
What is combustion?Combustion is a type of reaction in which a molecule or compound reacts with atmospheric oxygen producing carbon dioxide and water. Combustion reaction is exothermic thus, evolves heat during reaction.
The general chemical equation for a combustion reaction can be written as:
[tex]\rm M + nO_{2} \rightarrow xH_{2}O + y CO_{2}[/tex]
Where, M be a reactant.
Combustion is an aerobic process that is only taking place in presence of oxygen. Hydrocarbon gases easily undergo combustion forming heat energy and they are used as fuels propellants.
To find more on combustion, refer here:
https://brainly.com/question/15117038
#SPJ2
How many moles of copper are in 6,000,000 atoms of copper?
Answer: There will be 9.9632 × 10⁻¹⁸ moles of Copper in 6,000,000 atoms of Copper.
if you aint stephanie dont anwer
Answer:
wsp
Explanation:
What type of minerals make up more than 90% of the earth's crust?
sulfites
silicates
stalagtites
hematites
Answer:
Rocks
Explanation:
Answer:
silicate
Explanation:
Write out the electron configurations of the ions below and determine which one is listed with an incorrect charge. (the numbers and charges written after the elemental symbol should be understood as superscripts)
A. I-
B.O2+
C. Al3+
D. Mg2+
E. none of the above
Answer:
I think B. O2+
Explanation:
Answer:
B
it must be O2- not O2+, because it's an anion not a cation.
what is the balanced equation for naphthalene and sulphur?
napthalene: C10H8 sulphur: S02
Explanation:
C10H8
Plz help
Plz and thank u
6b
Which of the following is a starting compound during
cellular respiration?
Answer: Oxygen and glucose.
Explanation:
Oxygen and glucose are both reactants in the process of cellular respiration. The main product of cellular respiration is ATP; waste products include carbon dioxide and water.Jun 1, 2020
A log has a density of .8 g/cm³. What will happen to this log in freshwater, which has a density of 1.0 g/cm³?
It will sink.
It will float.
It will move deeper.
It will decrease in density.
Explanation:
Objects with a lower density will float while objects with a higher density will sink.
Since 0.8g/cm³ < 1.0g/cm³,
The log will float in freshwater.
Please Help!
Your car has 1.95 gallons of gasoline (octane, d = 0.6916 g/mL), which reacts with oxygen
according to the balanced reaction below. Your car uses the energy produced by this reaction
at a rate of 115 kJ per second while traveling at a speed of 65 miles per hour. Calculate the
distance (in miles) the car can travel using this amount of octane.
2 C8H18(g) + 25 O2(g) -----> 16 CO2(g) + 18 H2O(g) ΔHrxn = -10,900 kJ
Answer:
38.3 miles
Explanation:
First, we convert 1.95 gallons to mililiters:
1.95 gallons * [tex]\frac{3.785 L}{1gallon}*\frac{1000mL}{1 L}[/tex]= 7380.75 mLThen we calculate how many grams of octane are available for the reaction, using its density:
0.6916 g/mL * 7380.75 mL = 5104.53 g C₈H₁₈Now we convert octane grams into octane moles, using its molar mass:
5104.53 g C₈H₁₈ ÷ 114 g/mol = 44.78 mol C₈H₁₈Then we calculate how many kJ are produced from the combustion of 44.78 mol C₈H₁₈, if 2 moles produce 10900 kJ:
44.78 mol * 10900 kJ / 2 mol = 244032 kJWe calculate how many seconds is the car available to keep going, if it spends 115 kJ per second:
244032 kJ * 1 s / 115 kJ = 2122.02 sWe convert seconds to hours:
2122.02 / 3600 = 0.59 hoursFinally we calculate the distance:
65 mi/hour * 0.59 hour = 38.3 miI am a nonmetal.I am in the Oxygen family and in row 3.I have 6 valence electrons.I am yellow and have a stinky smell.Who am i
Answer:
sulfur
Explanation:
In oxygen family sulfur has yellow color and also having stinky smell. Thus given statements are about sulfur.
It is present in oxygen family.
It has six valance electrons.
Its atomic number is 16.
Its atomic weight is 32 amu.
The electronic configuration of sulfur is given below,
S₁₆ = 1s² 2s² 2p⁶ 3s² 3p⁴
We can see the valance shell is third shell and it have six electrons thus sulfur have six valance electrons. (3s² 3p⁴ )
Sulfur is used in vulcanisation process.
It is used in bleach and also as a preservative for many food.
it is used to making gun powder.
Which is one advantage of using a reflecting telescope instead of a refracting telescope?
Reflecting telescopes are less expensive.
Reflecting telescopes produce clearer images.
Reflecting telescopes require only concave lenses.
Reflecting telescopes usually take up less space.
Answer:
Reflecting telescopes take up less space, is the suitable answer.
Answer:
B, or 2: Reflecting telescopes produce clearer images.
Explanation:
Took the test
How many grams are in 2.3 x 1024 formula units of KNO3?
390 g KNO₃
General Formulas and Concepts:ChemistryAtomic Structure
Reading a Periodic TableUsing Dimensional AnalysisAvogadro's Number - 6.022 × 10²³ atoms, molecules, formula units, etc.MathPre-Algebra
Order of Operations: BPEMDAS
Brackets Parenthesis Exponents Multiplication Division Addition Subtraction Left to Right Explanation:Step 1: Define
2.3 × 10²⁴ formula units KNO₃
Step 2: Identify Conversions
Avogadro's Number
Molar Mass of K - 39.10 g/mol
Molar Mass of N - 14.01 g/mol
Molar Mass of O - 16.00 g.mol
Molar Mass of KNO₃ - 39.10 + 14.01 + 3(16.00) = 101.11 g/mol
Step 3: Convert
[tex]2.3 \cdot 10^{24} \ formula \ units \ KNO_3(\frac{1 \ mol \ KNO_3}{6.022 \cdot 10^{23} \ formula \ units \ KNO_3} )(\frac{101.11 \ g \ KNO_3}{1 \ mol \ KNO_3} )[/tex] = 386.172 g KNO₃
Step 4: Check
We are given 2 sig figs. Follow sig fig rules and round.
386.172 g KNO₃ ≈ 390 g KNO₃
1. Which statement is true about the relationship between chromosomes, genes and
traits?
A. Genes are found within traits, and their codes are used to make chromosomes.
B. Chromosomes are found within genes, and their codes are used to make traits.
C. Genes are found within chromosomes, and their codes are used to make traits.
D. One gene is found on every chromosome and they are used to make traits.
Answer:
the answer is C.Explanation:
Jill is recovering from the Flu. At lunchtime, she shares her water bottle with her friend Dara. The next day,
Dara is sick. Which type of Disease is the Flu
Answer: I think its a virus
Explanation: Viruses spread form person to person just like any virus so if I'm correct the disease is a virus
True or False: All metals have high melting points.
Answer:
True. All metals have a melting point when it reaches a certain degree of temperature
Explanation:
Which defines the average inetic energy of a system's particles?
O density
O pressure
O temperature
O volume
Based on the chemical equation, use the drop-down menu to choose the coefficients that will balance the chemical equation:
(
)O2 → (
)O3
Answer:
3
2
Explanation:
3O2 => 2O3
the equation is balancing
You want to measure the volume of a gold bracelet. For this purpose, a specimen with 20 mL of water is available; when inserting the bracelet, the water level rises to 25 mL. If the density of gold is 19300 Kg/m3. What will be the mass of the bracelet?
Answer:
volume of bracelet is 5cm3
mass is 0.0965Kg
Explanation:
1ml = 1cm3
1m3 = 1000000cm3
0.000005m3
Mass = volume*density
19300 Kg/m3 * 0.000005m3 = 0.0965Kg
How many moles of Fe2+ are there in a 2.0g sample that is 80% by mass of FeCl2?
The number of moles of [tex]Fe^{2+}[/tex] in the [tex]2.0g[/tex] sample of [tex]FeCl_{2}[/tex] is [tex]0.0157[/tex] moles.
The following points should be noted about the number of moles:
The number of moles of any substance can be calculated using the mass and molar mass of the substance. [tex]n = \frac{mass}{molarmass}[/tex], where n is the number of moles.Mass of the sample given as [tex]2.0g[/tex] and the molar mass of the sample as [tex]126.75g/mol[/tex].
Therefore, the number of moles of [tex]Fe^{2+}[/tex]is obtained by dividing the mass by the molar mass.
Hence the number of moles is obtained as [tex]0.0175[/tex] moles.
Learn more about the number of moles here:
https://brainly.in/question/22534630
3. The solubility of sodium chlorate in water is 52g / 100g H20. If 0.46 moles of sodium
chlorate are dissolved in 60g of water, is this solution
saturated/supersaturated/unsaturated?
hello! i think the answer is saturated
What is generally true of atoms with relatively large atomic radii?
Answer:
Large atoms hold their electrons very tightly. ... Large atoms tend to be found on the right side of their period on the periodic table.
Explanation:
Answer:
Explanation:
Large atoms tend to have a low ionization energy and a low electron affinity.
At which point is crust neither created nor destroyed?
island chain
mid-ocean ridge
divergent boundary
transform boundary
Answer:
transform battery
Explanation:
Answer: D. Transform Boundary
Explanation: I did the test.
3. Using the solubility of ionic compounds table and/or the solubility rules,
list 3 substances that will NOT form a solution with water? (Hint:
identify substances that are insoluble with water)
what is the dilution factor if you add a 0.1ml aliquot of a specimen to 9.9 dilutent
The dilution factor : 100
Further explanationThe dilution factor(DF) : ratio of concentration of stock solution and diluted solution or ratio of the volume of final solution to the initial volume from stock solution
From equation of dilution :
M₁V₁=M₂V₂
[tex]\tt DF=\dfrac{M_1}{M_2}=\dfrac{V_2}{V_1}[/tex]
Volume of aliquot = 0.1 ml
Volume of diluent = 9.9 ml
So final volume :
[tex]\tt V_f(final~volume)=volume~aliquot+volume~diluent\\\\V_f=0.1+9.9=10~ml[/tex]
The dilution factor (DF) :
[tex]\tt D_f=\dfrac{V_f}{V_i}\\\\D_f=\dfrac{10}{0.1}=100[/tex]
Will give brainliest
Answer:
c. both gases have the same number of molecules
brainliest?
If I change the volume of a solution from 5.00 L to 10.0 L, what was the new
concentration if the original concentration was 4.0 M? Please help me as soon as possible with explanation.
The new concentration = 2 M
Further explanationDilution is a process of decreasing the concentration of a solution by adding a number of solvents
Can be formulated
M₁V₁=M₂V₂
M₁ = Initial Molarity
V₁ = Initial volume
M₂ = Final Molarity (after dilution)
V₂ = Final volume (after dilution)
V₁=5 L
V₂=10 L
M₁=4 M
The new concentration(M₂) :
[tex]\tt M_2=\dfrac{V_1.M_1}{V_2}\\\\M_2=\dfrac{5\times 4}{10}\\\\M_2=2~M[/tex]
How is continental crust different from oceanic crust?
A: Oceanic crust is thicker and more dense.
B: Oceanic crust is thinner and more likely to sink.
C: Continental crust is thicker and more likely to sink.
D: Continental crust is more dense and lighter.
Answer:
b
Explanation:
google lol ur welcome
B: Oceanic crust is thinner and more likely to sink.
If I Gave A Pig Bacon Would He Eat It ?
What are the coefficients for the reaction _Cl2O5 + _H2O → _HClO3 once it is balanced?
1, 1, 1
1, 1, 2
1, 2, 2
2, 1, 1
Answer:
1, 1, 2
Explanation:
Answer:
Answer is B. 1, 1, 2
Explanation:
<3
Find the volume of
this object.
5 cm
5 cm
5 cm
A
15 cm3
B
125 cm3
C
30 cm3
Answer: B. [tex]125\ cm^3[/tex].
The volume of the given object = [tex]125\ cm^3[/tex]
Explanation:
Given : Dimensions of an object : 5 cm x 5 cm x 5 cm [ it is a cube with all equal sides]
Formula to find the volume of a cube = [tex](side)^3[/tex]
[tex]=5^3\ cm^3=125\ cm^3[/tex]
Hence, the volume of the given object = [tex]125\ cm^3[/tex]
Therefore , the correct option is B. [tex]125\ cm^3[/tex].