Answer:
The formula of ammonium fluoride is NH4F.
Explanation:
1 The atoms in each ion are bonded together covalently to form a single unit.
Wrong!
⇒ The atoms in an ion compound are linked together by an ionic bond.
2 The charge is distributed over the entire ion.
Wrong!
Ions have taken in or given up electrons. This happens in the atomic shell.
3 The formula of ammonium fluoride is NH4F.
Right!
4 The formula of potassium sulfate is K2SO
Wrong!
The formula for potassium sulfate is K2SO4.
What concentration of NO−3NO3− results when 897 mL897 mL of 0.497 M NaNO30.497 M NaNO3 is mixed with 813 mL813 mL of 0.341 M Ca(NO3)2?
Answer:
Explanation:
NaNO₃ = Na⁺ + NO₃⁻¹
.497 M .497 M
moles of NO₃⁻¹ = .897 x .497 = .4458 moles
Ca( NO₃)₂ = Ca + 2 NO₃⁻¹
.341 M 2 x .341 M = .682 M
moles of NO₃⁻¹ = .813 x .682 = .5544 moles
Total moles = .4458 moles + .5544 moles
= 1.0002 moles
volume of solution = 897 + 813 = 1710 mL
= 1.710 L
concentration of nitrate ion = 1.0002 / 1.710 M
= .585 M
Which phase change results in an increase in entropy?
1.
12(9) - 12(s)
2.
CH2(g) - CH40
3.
Br2(1) - Br2(g)
4.
H20(1) - H20(s)
The phase change that results in an increase in entropy is the change; Br2(1) - Br2(g)
What is entropy?The term entropy refers to the degree of disorderliness in a system. We have to note that gases have a higher entropy than liquids and liquids have a higher entropy than the solids.
As such, the phase change that results in an increase in entropy is the change; Br2(1) - Br2(g)
Learn more about entropy:https://brainly.com/question/12786977
#SPJ2
Two elements in the same period have the same number of _____ _____ in their electron clouds.
Answer:
outer electrons
Explanation:
Answer:
Energy levels
Explanation:
Consider the diagram below.
What does C represent?
A) enthalpy of reaction
B) activation energy
C) activated complex
D) energy of the reactants
Answer:
A) enthalpy of reaction
Explanation:
The region C signifies the enthalpy of reaction.
This diagram is the energy profile of an endothermic reaction. In such reaction, heat is absorbed from the surrounding. At the end of the reaction, the heat of product is lesser than that of the reactants.
Enthalpy changes are heat changes accompanying a physical and chemical change. An enthalpy is the difference between the sum of the heat contents of products and sum of the heat contents of reactants.it is indeed A) enthalpy of reaction
The weight of the purified caffeine is often much lower than the weight of the crude caffeine. Explain why the percent recovery is frequently low?
Answer:
see explanation
Explanation:
When caffeine is purified, the impurities are removed, these impurities are responsible for the greater mass of pure caffeine compared to the mass of the pure sample.
The percent recovery of caffeine is frequently low because some caffeine is often left behind in the solvent during the process of recrystallization.
Secondly, since caffeine is a sublime substance, some caffeine may be lost o sublimation leading to a low percent recovery of pure caffeine.
1. Assume this experiment (after the extractions are complete) left you with 4 pure products (aspirin, acetaminophen and caffeine, and the binder). Your lab mate distracted you after you had labeled the binder and now you can’t remember which of the remaining 3 products is which. What would be a simple test that you can perform in the laboratory to distinguish between the 3 remaining solids isolated from your experiments?
Answer:
Explanation:
Out of aspirin, acetaminophen and caffeine, aspirin is an acid because it is acetyl saliciylic acid . Hence it can be tested with litmus paper .
acetaminophen contains phenolic functional group , hence it is a weak acid . It can be tested with any test with which phenol test are done, like with neutral solution of ferric chloride .
caffeine is weak basic substance . It can also be tested with the help of testing a basic substance .
The Adálie penguins feed on krill that live on the underside of ice sheets. Which of the following would help Adálie penguins survive during the melting of Antarctic sea ice?
The correct answer is Migrating farther into the sea
Explanation:
The Adálie penguins rely on ice sheets to obtain food as the krill they feed on is only found underside of the ice. This implies as the Antarctic sea ice melts Adálie penguins need to look for new places to find krill as if there are no ice sheets there are no krill for these penguins. Due to this, it is likely these penguins are forced to migrate or move farther into the sea to survive because it is likely in these zones there are ice sheets and therefore places where they can find krill. Despite this, this process might lead to a significant decline in the population of penguins due to the competence for food and the process of migration itself. Thus, the one that would help Adáline penguins to survive during the melting of Antarctic sea ice is migrating farther into the sea.
Have a nice day! :)
The Adálie penguins feed on krill that live on the underside of ice sheets. Adálie penguins survive during the melting of Antarctic sea ice help migrating farther into the sea. Therefore, option A is correct.
What is migration ?The term migration is defined as the movement of either people or animals from one area to another.
The Adálie penguins rely on ice sheets for food because the krill they eat is only found on the underside of the ice. As a result, it is likely that these penguins are forced to migrate or move further into the sea to survive.
Regardless, this process may result in a significant decline in penguin population due to food competence and the migration process itself.Thus, the one that will assist Adáline penguins in surviving during the melting of Antarctic sea ice is migrating deeper into the sea.
To learn more about the migration, follow the link;
https://brainly.com/question/28827966
#SPJ2
Your question is incomplete,most probably your question was
The Adálie penguins feed on krill that live on the underside of ice sheets. Which of the following would help Adálie penguins survive during the melting of Antarctic sea ice? Migrating farther into the sea Breeding during summer months Growing strong toe nails to grip ice Spending more time raising their young
During a solar eclipse, which of the following is true?
HELP
Answer:
The moon blocks the Sun's light from hitting the surface of the earth
Explanation:
Please help! I'm confused on a few of these, 100 points!
A petroleum refinery is producing the four products shown in the table. The table also shows the state of matter at room temperature of each of the substances. All of these compounds are molecular compounds consisting of only hydrogen and carbon. Which of the following products is likely to have the highest molecular weight? A. Natural gas B. Gasoline C. Jet fuel D. Paraffin wax
Answer:D
Explanation: in molecular solids, one factor that determines the strength of intermolecular forces is the mass of the molecules. Since all of these compounds only contain hydrogen and carbon we don’t have to worry about their polarities as they are all the same. Inter molecular forces tend to be stronger when the molecular weight is greater since paraffin wax is the only solid at room temperature it has the highest melting point
Answer: Your Answer Is D. Paraffin wax
Explanation:Hope This Helps!
Use the Rydberg Equation to calculate the energy in Joules of the transition between n = 7 and n = 3 for the hydrogen atom. Find the frequency in Hz of this transition if the wavelength is 1000nm.
Answer:
The energy of each transition is approximately [tex]1.98\times 10^{-19}\; \rm J[/tex].
The frequency of photons released in such transitions is approximately [tex]3.00\times 10^{14}\; \rm Hz[/tex].
Explanation:
The Rydberg Equation gives the wavelength (in vacuum) of photons released when the electron of a hydrogen atom transitions from one main energy level to a lower one.
Let [tex]\lambda_\text{vac}[/tex] denote the wavelength of the photon released when measured in vacuum.Let [tex]R_\text{H}[/tex] denote the Rydberg constant for hydrogen. [tex]R_\text{H} \approx 1.09678 \times 10^{7}\; \rm m^{-1}[/tex].Let [tex]n_1[/tex] and [tex]n_2[/tex] denote the principal quantum number of the initial and final main energy level of that electron. (Both [tex]n_1\![/tex] and [tex]n_2\![/tex] should be positive integers; [tex]n_1 > n_2[/tex].)The Rydberg Equation gives the following relation:
[tex]\displaystyle \frac{1}{\lambda_\text{vac}} = R_\text{H} \cdot \left(\frac{1}{{n_2}^2}} -\frac{1}{{n_1}^2}\right)[/tex].
Rearrange to obtain and expression for [tex]\lambda_\text{vac}[/tex]:
[tex]\displaystyle \lambda_\text{vac} = \frac{1}{\displaystyle R_\text{H}\cdot \left(\frac{1}{{n_2}^2} - \frac{1}{{n_1}^2}\right)}[/tex].
In this question, [tex]n_1 = 7[/tex] while [tex]n_2 = 3[/tex]. Therefore:
[tex]\begin{aligned} \lambda_\text{vac} &= \frac{1}{\displaystyle R_\text{H}\cdot \left(\frac{1}{{n_2}^2} - \frac{1}{{n_1}^2}\right)} \\ &\approx \frac{1}{\displaystyle 1.09678 \times 10^{7}\; \rm m^{-1} \cdot \left(\frac{1}{3^2} - \frac{1}{7^2}\right)} \approx 1.0 \times 10^{-6}\; \rm m \end{aligned}[/tex].
Note, that [tex]1.0\times 10^{-6}\; \rm m[/tex] is equivalent to [tex]1000\; \rm nm[/tex]. That is: [tex]1.0\times 10^{-6}\; \rm m = 1000\; \rm nm[/tex].
Look up the speed of light in vacuum: [tex]c \approx 3.00\times 10^{8}\; \rm m \cdot s^{-1}[/tex]. Calculate the frequency of this photon:
[tex]\begin{aligned} f &= \frac{c}{\lambda_\text{vac}} \\ &\approx \frac{3.00\times 10^{8}\; \rm m\cdot s^{-1}}{1.0\times 10^{-6}\; \rm m} \approx 3.00 \times 10^{14}\; \rm Hz\end{aligned}[/tex].
Let [tex]h[/tex] represent Planck constant. The energy of a photon of wavelength [tex]f[/tex] would be [tex]E = h \cdot f[/tex].
Look up the Planck constant: [tex]h \approx 6.62607 \times 10^{-34}\; \rm J \cdot s[/tex]. With a frequency of [tex]3.00\times 10^{14}\; \rm Hz[/tex] ([tex]1\; \rm Hz = 1\; \rm s^{-1}[/tex],) the energy of each photon released in this transition would be:
[tex]\begin{aligned}E &= h \cdot f \\ &\approx 6.62607 \times 10^{-34}\; \rm J\cdot s^{-1} \times 3.00 \times 10^{14}\; \rm s^{-1} \\ &\approx 1.98 \times 10^{-19}\; \rm J\end{aligned}[/tex].
The energy of the transition between n = 7 and n = 3 is 1.96 × 10^-19 J while the frequency is 3 × 10^14 Hz.
Using the Rydberg Equation for energy;
ΔE = -RH(1/n^2final - 1/n^2initial)
Given that;
nfinal = 3
ninitial = 7
RH = 2.18 × 10^-18 J
ΔE = - 2.18 × 10^-18(1/3^2 - 1/7^2)
ΔE = - 2.18 × 10^-18(0.11 - 0.02)
ΔE = - 1.96 × 10^-19 J
For the second part;
Since the wavelength is 1000nm, we have;
λ = 1000nm
c = 3 × 10^8 m/s
f = ?
c = λf
f = c/λ
f = 3 × 10^8 m/s/1000 × 10^-9 m
f = 3 × 10^8 m/s/ 1 × 10^-6 m
f = 3 × 10^14 Hz
Learn more: https://brainly.com/question/18415575
Bromine is found above iodine in Group 17 of the periodic table. If an ion formed by bromine has a charge of 1-, what is the charge on an ion
formed by iodine?
A. -7
B. -2
C. -1
D. +1
Answer:
Explanation:
Iodine is the most flexible of the atoms in Group 17 of the periodic table. It can have more than 1 charge, especially when combined with oxygen. The answer that you are expected to give, I think is C. Iodine's dominant charge is - 1
If3.91 potassium metal is
allowed to react with oxygen,
O2, the reaction yields 7.11g of k2o.
How much oxygen was reacted?
does chlorine or silicone have a smaller atomic radius and why
Answer: Chlorine.
Explanation:
Since chlorine's 17 protons are greater than magnesium's 12 protons, chlorine will have a greater effective nuclear charge to draw chlorine's valence electrons closer to the nucleus and, thus, chlorine is expected to have the smaller atomic radius, while magnesium with the lower effective nuclear charge is expected to have a smaller amount of radius.
If Sodium has a 1+ charge, and Phosphous has a 3- charge, how many Sodium are needed for every Phosphous?
Answer:
Explanation:
It will take 3 sodium ions to neutralize 1 phosphorus ion. That's because you need 3 plus's to satisfy the - charge on phosphorous. So the chemical formula is Na3P reflecting this fact.
what might happen to variables in a science experiment that would lead to unusable results?
Answer:
ejeb094
Explanation:
nnb3neneie9eei rje
SOMEONE PLZ HELP!!!!
Answer:
4.22mL
Explanation:
V=m/d
v= 18.45g/4.37g/mL
Peroxyacylnitrate (PAN) is one of the components
of smog. It is a compound of C, H, N, and O.
Determine the percent composition of oxygen and
the empirical formula from the following percent
composition by mass: 19.8 percent C,
2.50 percent
H, 11.6 percent N. What is its molecular formula
given that its molar mass is about 120 g?
C – 19,9%, H – 2,2%, N – 11,6%, O – x%
[tex]M=120\frac{g}{mol}[/tex]
1 percentage
The entire molecule is 100% and all the components of the compound add up to 100%.
100% - 19,9% - 2,5% - 11,6% = 66,1%
The compound contains 66,1% oxygen.
2 molar masses
[tex]M_{C}=12,01\frac{g}{mol}[/tex]
[tex]M_{H}=1,008\frac{g}{mol}[/tex]
[tex]M_{O}=15,999\frac{g}{mol}[/tex]
[tex]M_{N}=14,007\frac{g}{mol}[/tex]
3 masses
The compound has a molar mass of 120g/mol. So one molecule weighs 120 g. To find out how much the percentage of a component weighs, you have to calculate it using the molar mass.
carbon
19,8% of 120g
[tex]m=120g*0,198\\m=23,76g[/tex]
One molecule contains 23,76g of carbon.
hydrogen
2,5% of 120g
[tex]m=120g*0,025\\m=3g[/tex]
One molecule contains 3g of hydrogen.
oxygen
66,1% of 120g
[tex]m=120g*0,661\\m=79,32g[/tex]
One molecule contains 79,32g of oxygen.
nitrogen
11,6% of 120g
[tex]m=120g*0,0,116\\m=13,92g[/tex]
One molecule contains 13,92g of nitrogen.
4 amount of substance
carbon
[tex]n=\frac{23,76g}{12,01\frac{g}{mol} }\\n=1,98mol[/tex]
The compound contains about 2 moles of carbon.
hydrogen
[tex]n=\frac{3g}{1\frac{g}{mol} }\\n=3mol[/tex]
The compound contains about 3 moles of hydrogen.
oxygen
[tex]n=\frac{79,32g}{15,999\frac{g}{mol} }\\n=4,96mol[/tex]
The compound contains about 5 moles of oxygen.
nitrogen
[tex]n=\frac{13,92g}{14,007\frac{g}{mol} }\\n=0,99mol[/tex]
The compound contains about 1 moles of nitrogen.
5. molecular formula
The formula results from the ratio of the amounts of substance.
[tex]n_{C} :n_{H} :n_{O} :n_{N} =2:3:5:1\\C_{2}H_{3}NO_{5}[/tex]
The molecular formula of the given compound is C₂H₃NO₅, and percent composition of oxygen in it is 66.1%.
How do we calculate mass from % composition?Mass of any composition of any compound will be calculated by using the below formula as:
Mass of component = (% composition)×(mass of compound) / 100
Given mass of compound = 120g/mol
Total composition of compound (100%) = Percent composition of all components
% composition of oxygen = 100 - (19.8 + 2.50 + 11.6) = 66.1%
Moles will be calculated as:
n = W/M, where
W = given mass
M = molar mass
For carbon atom:Mass of Carbon component = (0.198)(120g) = 23.76g
Moles of Carbon atom = 23.76g / 12.01g/mol = 1.98mol = 2 moles
For nitrogen atom:Mass of Nitrogen component = (0.116)(120g) = 13.92g
Moles of Nitrogen atom = 13.92g / 14.007g/mol = 0.99mol = 1 moles
For oxygen atom:Mass of Oxygen component = (0.661)(120g) = 79.32g
Moles of Oxygen atom = 79.32g / 15.99g/mol = 4.96mol = 5 moles
For hydrogen atom:Mass of Hydrogen component = (0.025)(120g) = 3g
Moles of Hydrogen atom = 3g / 1g/mol = 3 moles
So, the molecular formula of the compound on the basis of moles of given entities is C₂H₃NO₅.
Hence required molecular formula is C₂H₃NO₅.
To know more about emperical formula, visit the below link:
https://brainly.com/question/1603500
pentane or 2,2,3- trimethylhexane has the higher boiling point. why?
Answer:
2,2,3- trimethylhexane because it has more carbon atoms than pentane.
Explanation:
Hello.
In this case, since the physical properties of organic compounds are intensified as the number of carbon atoms start increasing on it, the larger the amount of carbon atom, the higher the boiling point since more energy is required to allow the liquid-phase molecules to transcend to the vapor-phase.
In such a way, since pentane has five carbon atoms and 2,2,3- trimethylhexane has nine carbon atoms, 2,2,3- trimethylhexane has the highest boiling point.
Best regards.
Your task is to create a buffered solution. You are provided with 0.10 M solutions of formic acid and sodium formate. Formic acid has a pKa of 3.75. 2. Create approximately 20 mL of buffer solution with a pH of 4.25.
Answer:
15.2mL of the 0.10M sodium formate solution and 4.8mL of the 0.10M formic acid solution.
Explanation:
To find the pH of a buffer based on the concentration of the acid and conjugate base we must use Henderson-Hasselbalch equation:
pH = pKa + log [A⁻] / [HA]
Where [A⁻] could be taken as moles of the sodium formate and [HA] moles of the formic acid
4.25 = 3.75 + log [A⁻] / [HA]
0.5 = log [A⁻] / [HA]
3.162 = [A⁻] / [HA] (1)
As both solutions are 0.10M and you want to create 20mL of the buffer, the moles are:
0.10M * 20x10⁻³L =
2x10⁻³moles = [A⁻] + [HA] (2)
Replacing (2) in (1):
3.162 = 2x10⁻³moles - [HA] / [HA]
3.162 [HA] = 2x10⁻³moles - [HA]
4.162[HA] = 2x10⁻³moles
[HA] = 4.805x10⁻⁴ moles
[A⁻] = 2x10⁻³moles - 4.805x10⁻⁴ moles = 1.5195x10⁻³moles
That means, to create the buffer you must add:
[A⁻] = 1.5195x10⁻³moles * (1L / 0.10mol) = 0.0152L =
15.2mL of the 0.10M sodium formate solution[HA] = 4.805x10⁻⁴ moles * (1L / 0.10mol) = 0.0048L =
4.8mL of the 0.10M formic acid solutionif you wanted to measure in irregular object's volume, which device would you use?
Answer:
a beaker
Explanation:
Which of the following objects would have the smallest wavelength at the same velocity?
Baseball
Electron
Planet Earth
Proton
Answer: Planet Earth
Explanation: Wavelength (λ) is equal to h/mυ , where m = the mass of your object and υ = the frequency. Since Earth has the largest mass of the options, we can conclude that Earth will have the smallest wavelengths out of the rest.
The wavelength of matter-waves is given by the De Broglie formula. The larger the object, the smaller the observed wavelength hence the object having the smallest wavelength is Planet Earth.
De Broglie established the relationship between the momentum and the observed wavelength of an object. This proposition came to be known as wave-particle duality.
The wavelength of matter waves is given by;
λ = h/mv
Where;
λ = wavelength
m = mass of object
v = velocity of the object
If all the objects have the same velocity, the magnitude of the wavelength now depends on the mass of the object.
The object having the largest mass among the options is planet earth (5.972 × 10^24 kg).
Hence planet earth has the smallest wavelength among the options listed.
Learn more; https://brainly.com/question/7143261
What is the value of E0 for the spontaneous reaction resulting from a suitable combination of these half reactions?
Standard Potentials E0
Fe2+ --> Fe3+ + e- -0.77 V
2Hg --> Hg2+ + 2e- -0.79 V
a. +0.02 V.
b. +0.36 V.
c. -1.56 V.
d. -0.02 V.
e. +1.56 V.
Answer:
+0.02 V
Explanation:
For the reaction to be spontaneous, iron must be the cathode and Mercury the anode
Given that the standard cell potential is obtained from;
E°=E° cathode - E° anode
Since;
E° cathode = -0.77V
E° anode = 0.79 V
E°cell = -0.77 -(-0.79)
E°cell = +0.02 V
What should be the temperature of the solvent before adding it to the sample to be recrystallized?
Answer:
Near the boiling point of the solvent
Explanation:
The process of recrystallization is hinged on the fact that the amount of solute that can be dissolved by a solvent increases with temperature. The process involves creation of a solution by dissolving a solute in a solvent at or near its boiling point. At the boiling point of the solvent, the solute has a greater solubility in the solvent; not much volume of the hot solvent is required to dissolve the solute.
Before the solution is later cooled, you can now filter out insoluble impurities from the hot solvent. The quantity of the original solute drops appreciably because impurities have been removed. At this lower temperature, the solution becomes saturated and the solute can no longer be held in solution hence it forms pure crystals of solute, which can be recovered.
Recrystallization must be carried out using the proper solvent. The solute must be relatively insoluble in the solvent at room temperature but more soluble in the solvent at elevated temperature.
PLS PLS PLS PLS PLS PLS PLS help ASAP!!!!! Scientists call all of the compounds that contain carbon and are found in living things Organic because ________.
WILL DO BRAINLIEST!
plz help answer both will mark brainest
2. Determine the possible traits of the calves of : Da red (RR) bull is mated with a red (RR) cow 1 a red * (RR) bullis mated with a white (WW) Cow 2 Da roan * (RW) is mated with a red(RR)Cow 3 3. Illustrate your answers using a Punnett square. 4. Write your answers on the paper.
Measurements show that unknown compound X has the following composition: element mass % carbon 41.0% hydrogen 4.58% oxygen 54.6% Write the empirical chemical formula of X.
Answer:
CHO
Explanation:
Carbon = 41%, Hydrogen = 4.58%, oxygen = 54.6%
Step 1:
Divide through by their respective relative atomic masses
41/ 12, 4.58/1, 54.6/16
3.41 4.58 3.41
Step 2:
Divide by the lowest ratio:
3.41/3.41, 4.58/3.41, 3.41/3.41
1, 1, 1
Hence the empirical formula is CHO
Answer:
The empirical formula of X is C3H4O3.
Explanation:
Which energy source would be the best source of energy for rescue workers?
List the sources from worst to best.
Combustion Engine
Solar Cell
Nuclear Power Plant
Hydroelectric Power Plant
Human Powered Generator
Wind Turbine
Fuel Burning Power Plant
Answer:
Solar Cell
Explanation:
Claim 1: The sun (solar cells) is the best energy source for the rescue team.
Atoms of two different elements must have different
electrical charges.
numbers of neutrons.
atomic numbers.
energy levels.
GIVE EXPLANATION!!!!
Answer:
c atomic numbers
Explanation:
hope this helps
Answer:
atomic numbers
Explanation:
In order for two atoms to be different, they have to have a different number of protons. Protons are represented by the atomic number. Thus, atoms of two DIFFERENT elements must have different atomic numbers.
I took the test and got 100%
Hope this helps!