Which image corresponds to what moment in time? (1 point) The low-pitched sound corresponds to the sound source getting closer, its wavelength is longer. The high-pitched sound corresponds to the sound source moving away, its wavelength is shorter. The low-pitched sound corresponds to the sound source moving away; its wavelength is shorter. The high-pitched sound corresponds to the sound source getting closer; its wavelength is longer. The low-pitched sound corresponds to the sound source getting closer, its wavelength is shorter. The high-pitched sound corresponds to the sound source moving away, its wavelength is longer. The low-pitched sound corresponds to the sound source moving away, its wavelength is longer. The high-pitched sound corresponds to the sound source getting closer, its wavelength is shorter.​

Which Image Corresponds To What Moment In Time? (1 Point) The Low-pitched Sound Corresponds To The Sound

Answers

Answer 1

Answer:

The low-pitched sound corresponds to the sound source moving away; its wavelength is longer. The high-pitched sound corresponds to the sound source getting closer; its wavelength is shorter.

Just took the quiz, and it said this answer was correct.

Answer 2

In this picture, The low-pitched sound corresponds to the sound source moving away; its wavelength is longer. The high-pitched sound corresponds to the sound source getting closer; its wavelength is shorter.

What is wave ?

Wave is is a disturbance in a medium that carries energy as well as momentum . wave is characterized by amplitude, wavelength and phase. Amplitude is the greatest distance that the particles are vibrating. especially a sound or radio wave, moves up and down. Amplitude is a measure of loudness of a sound wave. More amplitude means more loud is the sound wave.

Wavelength is the distance between two points on the wave which are in same phase. Phase is the position of a wave at a point at time t on a waveform.

There are two types of the wave longitudinal wave and transverse wave.

Longitudinal wave : in which, vibration of the medium (particle) is parallel to propagation of the wave. Sound wave is a longitudinal wave.

Transverse wave : in which, vibration of the medium (particle) is perpendicular to propagation of the wave. Light wave is a Transverse wave.

According to the Doppler's effect, a sound source moves away from the observer its wavelength increases and when it moves towards the observer the wavelength decreases.  

To know more about Doppler's effect :

https://brainly.com/question/15318474

#SPJ2.


Related Questions

Why do you only see one side of the moon? Lesson 3. 05 Question 12 options:

A:The moon only has one side

B:The rotational period is greater than to the period of revolution for the moon

C: The rotational period is equal to the period of revolution for the moon

D:The rotational period is less than the period of revolution for the moon

Answers

Answer:

The Moon orbits Earth once every 27.3 days and spins on its axis once every 27.3 days. This means that although the Moon is rotating, it always keeps one face toward us. Known as “synchronous rotation,” this is why we only ever see the Moon's nearside from Earth.

I hope this helps you out

hey guys can y’all help quickly?
how to induce a positive temporary charge on the right side of a metal ball

Answers

Answer:

Temporary? You have two options

If you have a positively charged object, bring it close to the LEFT side of the ball (not touching it!).

If you have a negatively charged object, bring it close to the RIGHT side of the ball (again, not in contact).

Either way, the electron cloud will migrate towards the right side of the of your sphere.

Another option is to have a capacitor large enough to house the sphere inside it, and polarize it by attaching it to a DC source making sure that the negative plate of it is to the right of the sphere.

A mass m on a frictionless plane, inclined at an angle θ with respect to the horizontal, is connected by a cord that runs parallel to the inclined plane and is wrapped around a flywheel of radius r and moment of inertia

[tex]i=\frac{3mr^{2}}{4}[/tex]

what is the acceleration of the mass down
the plane?

Answers

The acceleration of the mass down the plane is determined as (4mg sinθ)/(3mr²).

Conservation of angular momentum

The acceleration of the mass down the plane is determined by applying the principle of conservation of angular momentum.

Fr = Iα

where;

F is weight of the object parallel to the planer is the radius of the flywheelI is moment of inertiaα is angular acceleration

(mg sinθ)r = Iα

(mg sinθ)r = I(ar)

(mg sinθ) = I(a)

[tex]a = \frac{mg \times sin(\theta)}{I} \\\\a = \frac{mg \times sin(\theta)}{3mr^2/4} \\\\a = \frac{4mg \times sin(\theta)}{3mr^2}[/tex]

Thus, the acceleration of the mass down the plane is determined as (4mg sinθ)/(3mr²).

Learn more about acceleration here: https://brainly.com/question/14344386

Ring of mass straight m and radius straight r is attached to the end of a thin rod of mass straight m and radius 2 straight r

Answers

The total moment of inertia about an axis is : [tex]L^{2} ( \frac{M}{3} + m ) + \frac{2mr^2}{5}[/tex] for a ring of mass m and radius straight r attached to a thin rod.

Determine the Total moment of Inertia about an axis

Given data:

mass of ring --> m

radius of ring --> r

mass of rod --> M

Length of rod ---> L ( 2 * radius )

Total Moment of Inertia about an axis = Irod  +  Iring

where : Irod = moment of inertia of rod,  Iring = moment of inertia of ring

Irod = ML² / 3

Iring = 2mr² / 5

moment of inertia around an axis by Iring = I

where ;  I = 2mr² / 5  + ML²   according to parallel axis theorem

Hence the Total moment of Inertia about an axis is :

Itotal =  2mr²/5  +  ML²  +  ML² / 3

        = [tex]L^{2} ( \frac{M}{3} + m ) + \frac{2mr^2}{5}[/tex]

 

Learn more about Moment of inertia : https://brainly.com/question/6956628

For a ring of mass m and radius straight r connected to a thin rod, the total moment of inertia about an axis is [tex]\rm I= L^2 (\frac{M}{3} +m)+\frac{2mr^2}{5}[/tex].

What is a moment of inertia?

The sum of the products of the mass of each particle in the body with the square of its distance from the axis of rotation expresses a body's tendency to resist angular acceleration.

The given data in the problem is;

m is the ring's mass.

r is the radius of a ring.

L is the rod length = 2r

The total Moment of Inertia about an axis;

[tex]\rm I = I_{rod}+I_{ring} \\\\ \rm I =\frac{ML^2}{3} +\frac{2mr^2}{5}[/tex]

According to the parallel axis theorem,

[tex]\rm I = \frac{2mr^2}{5} + ML^2[/tex]

The total Moment of Inertia about an axis will be;

[tex]\rm I_{total} = \frac{ML^2}{3} +\frac{2mr^2}{5}+ML^2 \\\\ \rm I_{total} =L^2 (\frac{M}{3} +m)+\frac{2mr^2}{5}[/tex]

Hence for a ring of mass m and radius straight r connected to a thin rod, the total moment of inertia about an axis is [tex]\rm I= L^2 (\frac{M}{3} +m)+\frac{2mr^2}{5}[/tex].

To learn more about the moment of inertia refer to the link;

https://brainly.com/question/15246709

#SPJ4

What kind of model is this?
A. Experimental model
O B. Mathematical model
O C. Computer model
o
D. Physical model

Answers

Answer:

I think it's Experimental

Explanation:

it has atoms on it.

Answer:

D

Explanation:

It is a physical model.

The reflection of a 10. 0 cm object appears to be 18 cm tall and 9 cm behind the mirror. What distance is the object from the mirror? cm.

Answers

The distance is the object from the mirror will be 5cm.

What is a mirror equation?

A mirror equation is an equation that relates object distance and image distance to focal length. It is often referred to as a mirror formula.

The object distance in a spherical mirror is the distance between the object and the pole of the mirror (u).

The given data in the problem is;

Image height = 18cm

Object height = 10cm

u is the object distance

v is the image distance = 9 cm

From the symmetry of the triangle;

[tex]\frac{image \ height }{object \ height} = \frac{v}{u} \\\\ \frac{18 }{10} = \frac{9}{u}\\\\ \rm u=\frac{90}{8} \\\\ u = 5\ cm[/tex],

Hence the distance is the object from the mirror will be 5cm.

To learn more about the mirror equation refer to the link;

https://brainly.com/question/3229491

According to the inverse square law, the force due to gravity between two masses will _____________.

Answers

Answer:

The inverse square law proposed by Newton suggests that the force of gravity acting between any two objects is inversely proportional to the square of the separation distance between the object's centers.

Explanation:

A 20 kg child and a 80 kg man are standing 10 meters apart on frictionless ice. How far from the man is the center of mass of the system?
1 meter?
2 meters?
3 meters?
4 meters?
5 meters?
6 meters?
7 meters?
8 meters?
9 meters?

Answers

the 80 kg man is standing 8 meters away from the center

What are radio isotopes??
Give one example of a radio isotope State one use too..

Don't spam.. ​

Answers

Answer:

An isotope is one of two or more species of atoms of a chemical element with the same atomic number and position in the periodic table and nearly identical chemical behavior but with different atomic masses and physical properties. In medicine, for example, cobalt-60 is extensively employed as a radiation source to arrest the development of cancer. Other radioactive isotopes are used as tracers for diagnostic purposes as well as in research on metabolic processes.

Hope this helps! Please let me know if you need more help, or if you think my answer is incorrect. Brainliest would be MUCH appreciated. Have a wonderful day!

Those isotopes which are unstable due to the presence of extra neutrons in their nuclei and emit various types of radiations are called radioactive isotopes. The radiations emitted are in the form of alpha particles, beta particles and gamma rays.

For eg :- carbon,hydrogen and chlorine.

Hope it helps you!!

How can we make a simple energy flow diagram to show the heat transfer between animals, heat lamps and environment?

Answers

Answer:

Remember a few key things:

1.) Oil comes from plants, but also animals

2.) When heat lamps are done or useless, they go to landfills

3.) Things in landfills go back to the environment after a few years or even decades.

4.) Sometimes there are all-natural oils for heat lamps

1. Which of the following represents the distance (how much ground the particle covers) moved by a particle in a simple harmonic motion in one time period? (Here, A represents the amplitude of the oscillation.)
0 cm
A cm
2A cm
4A cm

Please show all of your work.

Answers

What's the relationship

[tex]\\ \rm\Rrightarrow T=2\pi \sqrt{\dfrac{l}{g}}[/tex]

[tex]\\ \rm\Rrightarrow T^2g=4\pi ^2\ell[/tex]

[tex]\\ \rm\Rrightarrow\ell=\dfrac{T^2g}{4\pi^2}[/tex]

4A can be correct

The correct option is: 2A cm

What is simple harmonic motion?

In a simple harmonic motion, the particle moves back and forth around a mean position. The distance covered by the particle in one time period depends on the amplitude of the oscillation.

The time period (T) of a simple harmonic motion can be expressed in terms of the frequency (f) as:

T = 1/f

The frequency (f) of a simple harmonic motion can be related to the angular frequency (ω) as:

ω = 2πf

Therefore, the time period (T) can also be expressed in terms of the angular frequency (ω) as:

T = 2π/ω

The displacement of the particle at any time (t) during the simple harmonic motion can be expressed as:

x = A cos(ωt)

where x is the displacement, A is the amplitude, and cos(ωt) is the cosine function.

The particle moves from its initial position to its maximum displacement (+A), then back to its initial position, and finally to its maximum displacement in the opposite direction (-A), before returning to its initial position again. Therefore, the distance covered by the particle in one time period is twice the amplitude (2A).

Therefore, the correct option is:

2A cm

Learn more about simple harmonic motion, here:

https://brainly.com/question/28208332

#SPJ2

Please help me

Think about a time when you walked down an empty hallway
and heard the echo of your footsteps. Write what you think
caused the echo.

Answers

Answer:

Explanation:

There are a few conditions as mentioned:  "you walked down an empty hallway and heard the echo of your footsteps." So first thing is as you walk, your shoes touch the floor and make noises.  Those are sounds of your footsteps.  You are in a hallway so the sounds are trapped within the hallway.  It is empty so there is nothing like people who would block and absorb the sounds. With sounds bouncing around walls and floor of the hallway, they bounce back to the source: you. That is when you hear the echo of your footsteps.

Is distance a vector quantity

Answers

Explanation:

Nope, displacement is a vector quantity, whereas distance is the scalar (magnitude) of the total displacement.

Hope this clears things up :))

a 600kg wrecking ball is swinging from a crane as shown. When the wrecking ball reached the bottom of the path, the wrecking ball is moving 10m/s

Answers

Answer:

Explanation:

The picture is cut off so the wrecking ball and its path are not shown. It would be better if the whole picture is available.

Based on the written info, at the bottom of the path, the wrecking ball is moving at 10m/s.

The centripetal acceleration = velocity^2 / radius

= 10^2 / 25

= 100 / 25

= 4m/s^2

The centripetal force = mass * centripetal acceleration

= 600*4

= 2400N

As the ball is moving horizontally at the bottom, net vertical force is zero.

So Tension force in cable = Wrecking ball weight + Centripetal force

= 600*g + 2400

= 6000 + 2400; assuming g is 10m/s^2

= 8400N

A small car with mass of 0.800 kg travels at a constant speed
on the inside of a track that is a vertical circle with radius 5.00
m. If the normal force exerted by the track on the car when it
is at the bottom of the track is 25 N,
a) What is the normal force on the car when it is at the (i)
top, (ii) rightmost and (iii) leftmost point of the track?
b) What is the speed of the car as it travels around the
vertical circle?

Answers

Answer:

The equation of equilibrium at the top of the vertical circle is:

\Sigma F = - N - m\cdot g = - m \cdot \frac{v^{2}}{R}

The speed experimented by the car is:

\frac{N}{m}+g=\frac{v^{2}}{R}

v = \sqrt{R\cdot (\frac{N}{m}+g) }

v = \sqrt{(5\,m)\cdot (\frac{6\,N}{0.8\,kg} +9.807\,\frac{kg}{m^{2}} )}

v\approx 9.302\,\frac{m}{s}

The equation of equilibrium at the bottom of the vertical circle is:

\Sigma F = N - m\cdot g = m \cdot \frac{v^{2}}{R}

The normal force on the car when it is at the bottom of the track is:

N=m\cdot (\frac{v^{2}}{R}+g )

N = (0.8\,kg)\cdot \left(\frac{(9.302\,\frac{m}{s} )^{2}}{5\,m}+ 9.807\,\frac{m}{s^{2}} \right)

N=21.690\,N

What would happen to the particles in this box if it lost heat energy?






the particles would slow down and become less dense

the particles would slow down and become denser.

The particles would speed up and become denser

the particles inside of the box would evaporate

Answers

Answer:

A

Explanation:

i think its A

Why does the spectroscopic parallax method only work for main sequence stars?.

Answers

Answer:

Only main sequence stars have a well-defined relationship between spectral type and luminosity.

Explanation:

Low-mass stars have much longer lifetimes than high-mass stars.

What is the definition of the word PER?

Answers

Answer:

Per is a Latin preposition that means "through" or "by means of". Per (pronounced like "purr") is also an English preposition that can mean "for each", "to each", "by means of", or [lastly, annoyingly] "in accordance with"; somewhat interchangeably with the [even more annoying] "as per". In the example expressions here, it conveys "because of the rationale presented at/by".

Answer:

(Entry 1 of 4) 1 : by the means or agency of : through per bearer. 2 : with respect to every member of a specified group : for each. 3 : according to —often used with as per instructionsas per usual.

Explanation:

An iron sphere of radius 0.18m has mass 190 kg. Calculate the density of the iron

Answers

radius=r=0.18m

Volume:-

[tex]\\ \sf\rightarrowtail \dfrac{4}{3}\pi r^3[/tex]

[tex]\\ \sf\rightarrowtail \dfrac{4}{3}\pi (0.18)^3[/tex]

[tex]\\ \sf\rightarrowtail \dfrac{4}{3}\pi (0.005832)[/tex]

[tex]\\ \sf\rightarrowtail 0.024m^3[/tex]

Mass=190kg

Density:-

[tex]\\ \sf\rightarrowtail \dfrac{Mass}{Volume}[/tex]

[tex]\\ \sf\rightarrowtail \dfrac{190}{0.024}[/tex]

[tex]\\ \sf\rightarrowtail 7916.67kg/m^3[/tex]

Calculate the average force with which the Sun pulls the Earth. It will help to know
that rsun_Earth = 9.4E9 m.

Answers

Answer:

7.9 x 10^21 pound-force

Explanation:

The average distance between the Earth and sun is 150 trillion meters, or 1.5 x 10^11 meters. The mass of the sun is 1.99 x 10^30 kilograms, while the Earth weighs in at 6.0 x 10^24 kilograms. The gravitational constant is 6.67 x 10^-11 meter^3 / (kilogram - second^2). So the Earth and sun pull on each other with a force equal to 3.52 x 10^22 newtons. The newton is a unit of force equal to a kilogram-meter/second^2. One newton is equal to 0.22 of the rarely used English unit called pound-force, so 3.52 x 10^22 newtons is 7.9 x 10^21 pound-force.

The study of electrons as it relates to their use in electric devices

Answers

Answer:

An electron is a component of the broader term, electricity. Generally electricity refers to the control, manipulation, and use of the movement of electrons to perform some kind of work (motion/rotation, light, heat, etc…).

Explanation:

Or

put this

The study of electrons as it relates to their use in electric devices is electricity.

But I will go with the first one

according to this passage when making healthcare decisions, how should a person approach the decision making process

Answers

Answer:

What is your name?

Explanation:

no bro I don't know I am New of this app so I don't know

A body of mass 5kg is ejected vertically from the ground when a force of 600N acts on it for 0.1s. Calculate the velocity with which the body leaves the ground.​

Answers

Assuming g=10N

upward force=600N(applied force)

downward force=(W)=(5x10)=50N

net force=600-50

=550N

F=(delta)P/t

(delta)P=m (v-u)

u=0m/s

(delta)P=mv

550=(5)(v)/0.1

550x0.1

55=5v

v=11m/s

there was no mention of any gravity acting on the object only applied force ,infact we aren't even given the constant

so many assumptions have been made whyyyyyyy!!!

what's your take on it scientists

Franklin is loading a truck at work and his truck has a ramp that helps him move the boxes up. the incline of the ramp is 9 feet long and the top of the ramp is 3 feet off of the ground. what is the mechanical advantage of the incline franklin is using?

Answers

Answer:

Explanation:

Formula

MA = length of ramp / height

Givens

ramp length = 9 feet

height = 3 feet

Solution

MA = 9 / 3

MA = 3

Answer Mechanical advantage = 3

Planets A and B have the same mass, but planet A is half the size of planet B.
Which statement correctly explains the weight you would experience on each
planet?
A. You would weigh the same on both planets because the masses
of the planets are the same.
B. You would weigh less on planet A because the distance between
you and the planet's center of gravity would be smaller.
C. You would weigh the same on both planets because your mass
would be the same on both.
O D. You would weigh more on planet A because the distance between
you and the planet's center of gravity would be smaller.

Answers

Answer:

the correct one is A hope it helps

A long thing bar of copper is heated evenly along it's length

Answers

Answer:

It becomes less heavy

Explanation:

Hopefully it helps!

Water has a heat capacity or 4.184 j/g C. If 50 g of water has a temperature of 30C and a piece of hot copper is added to the water causing the temperature to increase to 70C. What is the amount of heat absorbed by the water.

Answers

Answer:

Ethanol C2H5OH or propane C3H8 have more energy

Explanation:

If the electric potential in a region is given by v(x)=7/x2 the x component of the electric field in that region is

Answers

Hi there!

Recall that:
[tex]\Delta V = -\int\limits^a_b {E \cdot } \, dx[/tex]

Given an electric field, the potential difference can be solved by using integration. Similarly:
[tex]E = -\frac{dV}{dx}[/tex]

We can differentiate the electric potential equation to solve for the electric field.

Use the power rule:
[tex]\frac{dy}{dx} x^n = nx^{n - 1}[/tex]

Differentiate the given equation.

[tex]-\frac{dV}{dx}\frac{7}{x^2} =- \frac{dV}{dx}7x^{-2} = -(-14x^{-3}) = \frac{14}{x^3}[/tex]

Or:
[tex]\boxed{E(x) = \frac{14}{x^3}}[/tex]

The component of the electric field in that region is E = 14/x³ if the electric potential in a region is given by v(x)=7/x2

What is an electric field?

An electric field is an electric property that is connected with any location in space where a charge exists in any form. The electric force per unit charge is another term for an electric field.

We have:

The electric potential in a region is given by:

[tex]\rm V(x) = \frac{7}{x^2}[/tex]

We know the relation between potential difference and an electric field is given by:

[tex]\rm \triangle V = \int\limits^a_b {E.} \, dx[/tex]

If the electric field is given, then:

[tex]\rm E = -\frac{dV}{dx}[/tex]

[tex]\rm E = -\frac{d(7x^{-2} )}{dx}[/tex]

After differentiate:

[tex]\rm E = -(-14x^{-3})[/tex]  or

[tex]\rm E = \frac{14}{x^3}[/tex]

Thus, the component of the electric field in that region is E = 14/x³ if the electric potential in a region is given by v(x)=7/x2

Learn more about the electric field here:

https://brainly.com/question/26690770

#SPJ4

best answer gets brainliest

Answers

Answer:

a because they are bigger and have more mass wich means that they will fall faster because there is more weight going downward...

Explanation:

Beluga

Answer:

Explanation:

It depends on whether this is a "trick" question.

The law of universal gravitation says that the attractive force between two objects depends directly on their masses and inversely to the square of distance in between them.

As the objects in A are bigger than B, they MAY have higher masses. So the force is larger in A.

But no information is given about object mass or density. The distance between objects in B is shorter. So if the objects in B have the same masses those in A, then the force is larger in B.

In general, which of the following is not a critical skill for participating in a sport? a. agility and balance b. endurance and muscle control c. hand-eye coordination and acuity d. none of the above please select the best answer from the choices provided. a b c d

Answers

Option D is not a critical skill for participating in a sport.

What are sports?

Sport refers to any competitive physical activity or game[1] that intends to utilize, maintain, or enhance physical ability and skills while also giving enjoyment to players and, in certain situations, entertainment to spectators.

Agility and balance are crucial in sports such as soccer, especially when players dribble the ball at rapid speeds.

Endurance and muscular control are critical in sports such as gymnastics and boxing.

Hand-eye coordination and acuity are essential in sports like golf.

Hence Option D is not a critical skill for participating in a sport.

To learn more about the sports refer to the link;

https://brainly.com/question/4252951

Answer:

D

Explanation

Other Questions
The process by which goods and services fluctuate due to increases and decreases on their demand and price Ramona went to a theme park during spring break she was there for 7 hours and rode 21 rides at what rate did I Ramona ride rides in rides per hour Using the equation 4x-7=13 , choose all the steps that are used to solve the equation. What is the value of x? in the figure line segment AB is tangent to the circle at point A. find the length of line segment AB 8 in. And 10 in. This is urgent I really I need the answers Thanks in advance Which element does a person's level of physical fitness depend on, besides cardiorespiratory endurance, muscle strength, muscle endurance, and flexibility can you please help? Can you talk to a real dermatologist online? Ok last question for the day yall ill give 5 stars if answer is correct What is the best objective summary of the passage "Oblomov" by Ivan Goncharov?A. Although Oblomov has nothing to do, he decides that pursuing a project is not worthwhile. He continues being a loafer.B. A man with nothing to do tries to come up with something to do in his life. He is unused to effort and does not succeed.C. A man named Oblomov provides a picture of an idle and lazy gentleman. His soul seems vacant.D. A young man spends most of his days doing nothing. He does not exercise his mind or his body. Maggie has been a social worker for 20 years. She is in tune with her clients'emotions and is supportive of their realistic goals. Maggie and her spouse own asuccessful organic farm and sell their produce to area health food markets. She andher family are close-knit and involved in environmental causes. How is Maggie anexample of someone with high interpersonal intelligence? -She is part of a family unit and involved in her community. -She is spiritual and concerned about global issues. -She has social abilities through her work with clients. -She has an ability to understand living things and the natural environment. Btw the answer needs to be a fraction. How can gardeners and farmers add mineral nutrients to soil? (Select all that apply.)They can heat the soil.They can add compost to the soil.They can add fertilizer to the soil.They can water the soil. A cell phone company charges $112.75 per month plus $0.25 per data usage over 1000 texts messages. how many messages can you send in one month for a budget of $325? At a jeans factory, a random quality check found 8 pairs defective and 292 pairs with no problems. how many defective pairs can be expected in the inventory of 3,000 pairs of jeans? 80 pairs 82 pairs 292 pairs 375 pairs To become a successful entrepreneur, you should:Select one:O Prepare to risk all of your family assets.O Plan to quit your job before starting.O Choose a business that is in a field you enjoy.O Expect to put down a lot of money. Identify the plant phylum based on the description.A tree that can be found in the mountains and produces seeds in cones is a type ofA tree that produces blossoms that can be fertilized and develop into fruit is a type ofThis low-lying plant that requires damp surfaces and does not have a system to transport water is a Use your calculator to find sin-1(0.48) to the nearest degree When was the Battle of Plassey fought?