Answer: The main purpose of any warhead is to inflict damage on the target. The way the damage is caused may vary with different types of warheads, but in the most general sense, damage is caused by the transfer of energy from the warhead to the target. The energy is typically mechanical in nature and takes the form of a shock wave or the kinetic energy of fragments. In either case, a large amount of energy must be released. For many warheads that energy is stored in the form of chemical explosives.
Explosive Reactions
There are many chemical reactions that will release energy. These are known as exothermic reactions. If the reaction proceeds slowly, the released energy will be dissipated and there will be few noticeable effects other than an increase in temperature. On the other hand, if the reaction proceeds very rapidly, then the energy will not be dissipated. Thus, a great quantity of energy can be deposited into a relatively small volume, then manifest itself by a rapid expansion of hot gases, which in turn can create a shock wave or propel fragments outwards at high speed. Chemical explosions may be distinguished from other exothermic reactions by the extreme rapidity of their reactions. In addition to the violent release of energy, chemical explosions must provide a means to transfer the energy into mechanical work. This is accomplished by expanding product gases from the reaction. If no gases are produced, then the energy will remain in the products as heat.
Most chemical explosions involve a limited set of simple reactions, all of which involve oxidation (reaction with oxygen). A relatively easy way to balance chemical explosive equations is to assume that the following partial reactions take place to their maximum extent (meaning one of the reactants is totally consumed) and in order of precedence:
Explanation:
Answer:
10 kilograms of dynamite
Explanation:
The more volume an object has the more potential energy is available if it is the same material. 10 kilograms is larger than 5 kilograms.
Which of the following reactants will generate products with a solution of phosphoric acid?
a
Al(s)
b
Cu(s)
c
Au(s)
d
Ag(s)
Answer:
A. Al(s)
Explanation:
what is ideal gas constant?? g0ogle doesnt got any good answerss
Answer:
An ideal gas is a gas with particular characteristics.
Explanation:
The particles have no volume All collisions between particles are elastic collisions and lose no kinetic energy The particles neither attract each other nor repel They have random movementIdeal gases are hypothetical which means that they do not exist in their true form.
hope this helps, pls mark brainliest :D
A molecule contains 24.36 g of nitrogen and 62.64g of sliver
Answer:
This molecule is AgN3
Explanation:
Answer:
AgN3
Explanation:
Mass of nitrogen N is given as 24.36 g
Molar mass of nitrogen N= 14 g/mol.
amount of substance in mol of N = mass/molar mass
=24.36 g/ 14 g/mol.
=1.74 mol.
Given mass of silver= 62,64 g.
Molar mass of silver Ag=107.87 g/mol
Number of mols=62.64 g ÷ 107.87 g/mol.
=0.58 mol.
Ratio of number of mol of N and number of mols of Ag = 1.74 mol / 0.58 mol
=3:1
Hence, empirical formula is AgN₃.
how is wind energy captured?
where is wind energy found?
how is water energy captured?
where is water energy found?
plz use the passage i put. plz and thank you!!!!!
HELP! Give the molar mass of Copper (II) Hydroxide.
Answer:
97.561 g/mol
Explanation:
What is the molecular formula of the molecule that has an empirical formula of CH2O and a molar mass of 120.12 g/mol
Answer:
C4H8O4
Explanation:
Let (CH20)x
C=1*12.01=12.01 (12.01, 1.01, 16.00 Avg mass of elements)
H=2*1.01=2.01
O=1*16.00=16.00
12.01 + 2.01 + 16.00 = 30.03
120.12/30,03=4
==> (CH2O)4 = C4H8O4
The molecular formula of the molecule that has an empirical formula of [tex]CH_2O[/tex] is equal to [tex]C_4H_8O_4[/tex].
Given the following data:
Empirical formula = [tex]CH_2O[/tex]Molar mass = 120.12 g/mol.Scientific data:
Molar mass of oxygen = 16 g/mol.Molar mass of hydrogen = 1 g/mol.Molar mass of carbon = 12 g/mol.To determine the molecular formula of the molecule that has an empirical formula of [tex]CH_2O[/tex]:
First of all, we would find the molar mass of [tex]CH_2O[/tex]:
[tex]CH_2O =12 +(1\times2)+16\\\\CH_2O =30\;g/mol[/tex]
For molecular formula:
[tex](CH_2O)n = 120.12\\\\30n = 120.12\\\\n=\frac{120.12}{30}[/tex]
n = 4.0
[tex](CH_2O)_4 = C_4H_8O_4[/tex]
Read more: https://brainly.com/question/21280037
PLEASE HELP !!
Use the diagram below to answer the following questions.
PLEASE HELP
E TE
Figure B
In Figure B, which region contains the noble gas family of elements?
ОА
OD
ОС
OB
Noble gas located in the region D
Further explanationNoble gas are located in group 18 in the periodic table consisting of helium (He), neon (Ne), argon (Ar), krypton (Kr), xenon (Xe), have a stable electron configuration where the valence electrons are 8(full outer shell of electrons), so it is very hard to react because of its stability
If we look at the periodic system of the elements, the noble gases are on the far right, so that in Figure 8 it is located in area D
And the other region :
A : alkali elements(group 1),
B : alkaline earth elements(group 2)
C : halogen elements(group 17)
Which substance is correctly identified as a homogeneous or heterogeneous mixture?
A. salad -- heterogeneous
B. milk --- heterogeneous
C. river water --- homogeneous
D. beach sand --- homogeneous
Answer:
A
Explanation:
A salad with lettuce, cheese, seeds, tomatoes, broccoli, and other vegetables is an example of a heterogeneous mixture.
Milk is not mixed with anything so that is incorrect
River water is mixed in with dirt and minerals so this one is incorrect
Beach sand is incorrect because you can see colored particles.
How did humans create cow breeds that survive well in cold weather?
Select one:
O
They identified cows that did well in cold weather and mated them.
O
They mated cows with sheep that had very thick wool.
O
They mated cows with caribou that tolerated the cold well.
O
They identified cows that did well in hot weather and mated them
Answer: They identified cows that did well in cold weather and mated them. This is known as selective breeding. All the other answers either cannot work as cross-species breeds generally don't work, or they target cows that survive well in hot weather.
2CuO+2NH3------ 3Cu + 3H2O+ N2. Given that the relative molecular mass of copper oxide is 80, what volume of ammonia is required to completely reduce 120 g of Copper oxide? ( Cu=64, O=16, N=14)
Volume of Ammonia(NH₃) = 22.4 L
Further explanationGiven
Reaction
3CuO+2NH₃⇒ 3Cu + 3H₂O+ N₂
In the problem, the CuO coefficient should be 3 not 2
M CuO = 80
mass CuO = 120 g
Required
The volume of NH₃
Solution
mol CuO :
[tex]\tt mol=\dfrac{mass}{M}\\\\mol=\frac{120}{80}\\\\mol=1.5[/tex]
From the equation, mol ratio CuO : NH₃ = 3 : 2, so mol NH₃=
[tex]\tt \dfrac{2}{3}\times 1.5=1~mol[/tex]
Assume at STP(0 °C, 1 atm) ⇒1 mol = 22.4 L, then volume of NH₃=22.4 L
HELP IN 8TH GRADE ADV SCIENCE
Answer:
protons: 36
neutrons: 48
electrons: 36
When we drink water, it is absorbed into our blood through the digestive tract. If the concentration of water in body cells is low, cells must get water from the blood. What process allows water to enter body cells from the blood?
Answer:
Osmosis
Explanation:
Water is very essential for the body. When we drink water, our blood cells absorbs water from the body. This happen by a process called as osmosis process. Osmosis is type of diffusion process.
Water along with oxygen and carbon dioxide are some of the simple molecules that moves into the blood cell. Osmosis is the process by which water molecules passes into the cell bodies through its semi permeable membrane.
For complete combustion of an organic compound needs 8 molecules of oxygen, what could the formula of this compound be?
Answer:
C5H12.
Explanation:
The compound will be C5H12.
Now consider the general formula for the combustion of an alkane;
CnH2n+2 + 3n+1/2O2-----> nCO2 + (n+1) H2O
If we substitute n=5, we have;
C5H12 + 8O2-----> 5CO2 + 6H2O
Hence the answer above.
The units of a formula mass are
a. amu
b. micrograms
c. moles
d. grams
Answer:
the units of a formula mass are amu.
What is the molar mass of phosphorus pentachloride and uranium hexafluoride?
Answer:
PCl₅ = 208.22g/mol. UF₆ = 352.03g/mol.
Explanation:
Find the atomic mass of each element–and if there's a subscript (you multiply the atomic mass by that much). P= 30.97g, Cl= 35.45g; 30.97+35.45(5) = 208.22g [same idea with UF₆]
Which of these are an atom's valence electrons?
Answer:
The Outer-most Electron shell contains the valence electrons.
Bonus Info:
Valence Electrons are used by atoms to make ionic bonds.
Answer:
Valence electrons are the electrons in the outermost shell, or energy level, of an atom. For example, oxygen has six valence electrons, two in the 2s subshell and four in the 2p subshell. We can write the configuration of oxygen's valence electrons as 2s²2p⁴.
Explanation:
ur welcome
i was doing this in school and i watched a video
what is the formula for this bond?
what happens when exhaled air passes through clear lime water?
what's the molar mass of Li3p
Answer:
51.79g Li₃P.
Explanation:
Li has a molar mass of 6.94 g (since there are 3, you multiply it 3 times) and P has a molar mass of 30.97 g. 6.94(3) + 30.97 = 51.79g.
Which of the following would increase the intensity of the tornado?
a. decrease in wind speed
b. decrease in condensation
c. increased rate of evaporation
d. increase of cold air
What would happen if a neutron was added to Lithium (7)
Answer:
if you add a neutron to lithium-7 it becomes a compound nucleus of lithium-8
I WILL DIE I HAVE A KNIFE IN MY HAND. ANSWER WITH EXPLANATION. If the sound is high pitched, then the wave's frequency would have a:
A.high frequency, short wavelength
B. high frequency, long wavelength
C. low frequency, long wavelength
D. low frequency, short wavelength
Answer:
A
Explanation:
High frequency, short wavelength
2. What property of liquids explains why water beads up on the car surface?
Answer:
Surface tension is a force that pulls particles at the exposed surface of a liquid toward other liquid particles. Surface tension explains why water forms droplets, like the water droplet that has formed on the leaky faucet pictured in the Figure below.
How many molecules of H2O are in 8.54 moles of H2O?
Select one:
a. 5.14 * 10^24 molecules H2O
b. 2.86 * 10^23 molecules H2O
c. 6.02 * 10^23 molecules H2O
d. 5.14 * 10^23 molecules H2O
Answer:
[tex]\boxed {\boxed {\sf A. \ About \ 5.14 *10^{24} \ molecules \ H_2O}}[/tex]
Explanation:
To convert from moles to units, we must use Avogadro's Number: 6.022 * 10²³
This tells us the number of units (molecules of water in this problem) in 1 mole of a substance (water). We can use it as a ratio or fraction.
[tex]\frac{6.022 *10^{23} \ molecules \ H_2O}{1 \ mol \ H_2 O}[/tex]
Now, we can multiply this fraction by the moles of water (8.54) given.
[tex]8.54 \ mol \ H_2O*\frac{6.022 *10^{23}\ molecules \ H_2O}{1 \ mol \ H_2 O}[/tex]
When we multiply, the moles of water will cancel out.
[tex]8.54 *\frac{6.022 \ molecules \ H_2O}{1 \ }[/tex]
Since the fraction has a 1 as a denominator, we can remove it. The problem will be a simple multiplication problem.
[tex]8.54*6.022 \ molecules \ H_2O[/tex]
[tex]5.142788*10^{24} \ molecules \ H_2O[/tex]
The original measurement of 8.54 has 3 significant figures (8, 5, and 4). Therefore, we must round our answer to 3 sig figs, which is the hundredth place in this case.
The 2 in the thousandth place tells us to leave the 4 in the hundredth place.
[tex]5.14 *10^{24} \ molecules \ H_2 O[/tex]
There are about 5.14*10²⁴ molecules of water in 8.54 moles.
Answer:
5.14 x 10^24 molecules of H2O.
Explanation:
just took the test
What is the name given to the group 0 elements
Answer:
the noble gases
As shown by the periodic table, why do the elements potassium and sodium have similar chemical properties?
Someone help with this ions and isotopes worksheet?
Isotopes are atoms of the same element that have different numbers of neutrons. Protons are positively-charged particles found in the nucleus of an atom.
Electrons are negatively-charged particles found in the outer shell of an atom. The charge on an element is determined by the number of protons and electrons present in the atom.
a.) Li+: number of protons = 3
Number of electrons = 2
charge of Li+ = +1
b.) Be2+: number of protons = 4
Number of electrons = 2
charge of Be2+ = 2+
c.) C4+: number of protons = 8
Number of electrons = 4
charge of C4+ = 4+
d.) O2-: number of protons = 8
Number of electrons = 10
charge of O2- = -2
e.) N3-: number of protons = 7
Number of electrons = 10
charge of N3- = -3
f.) C4- : number of protons = 4
Number of electrons = 4
charge of C4- = -4
g.) 14C6: The mass number = 14
Atomic number = 6
Number of neutrons = 8
h.) 18O8: The mass number = 18
Atomic number = 8
Number of neutrons = 10
i.) 19F9: The mass number = 19
Atomic number = 9
Number of neutrons = 10
j.) 40Ca20: The mass number =40
Atomic number = 20
Number of neutrons = 20
k.) 37Cl17: The mass number = 37
Atomic number = 17
Number of neutrons = 20
l.) 238U92: The mass number = 238
Atomic number = 92
Number of neutrons = 146
To learn more about isotopes click here https://brainly.com/question/21536220
#SPJ1
A ______ square is a diagram used to predict all possible allele combinations from a genetic ______. Using this diagram, the phenotypes of offspring can be determined from the genotypes.
Answer:
A Punnet Square...the second I am not sure.
Explanation:
Unfortunately the second could be many things. You'd have to have more background information.
Answer:
PUNNETT....,MAKE SURE U HAVE 2 T,s
Explanation:
punnett and cross
Please I need help I really don’t get this lol
Answer:
The pointer pointing to the grey and white balls are either proton or nuetron i van't really tell cause their grey and white.
The whole clster of balls is the Nucleus
The black balls on the lines are electrons
And the lines are the energy level
Explanation:
what method would you use for your hypothesis.