Which force counteracts motion whenever two surfaces come into contact?.

Answer:

600Kg

Explanation:

Force= mass × acceleration

mass= 1500/2.5

600kg

The mass of the rocket will be 600 kg.In the International System of Units (SI), the kilogram is the unit of mass.

Mass is a numerical measure of inertia, which is a basic feature of all matter. It is, in effect, a body of matter's resistance to a change in speed or position caused by the application of a force.

In the International System of Units (SI), the kilogram is the unit of mass.

The given data in the problem is;

The net constant force is, F= 1500 N

The acceleration is,a=2. 5 m/s²

The mass of the rocket is,m=?

[tex]\rm F= mass \times acceleration \\\\ m = \frac{F}{a} \\\\ m= \frac{1500}{2.5}\\\\ m = 600 \ kg[/tex]

Hence the mass of the rocket will be 600 kg.

To learn more about the mass refer to the link;

https://brainly.com/question/13073862

#SPJ4

Answer:

The correct answer is Uranus and Neptune

Answer:

solid

Explanation:

Solid is the most common state of matter in most metals at room temperature.

Answer:

The basic difference is wavelength (frequency)

ultraviolet < visible < infrared where the visible spectrum lies at

4000 - 7000 Angstroms =  400 - 700 millimicrons (10^-9 meters)

Tjhe shorter wavelengths (ultraviolet) carry more energy / photon

Answer: 32 cm

Explanation:

Electron flow out of the negative terminal, through the circuit and into the positive terminal of the source is accurate about Electron flow.

Electron flow is the current produced by the movement of free electrons moving along a positive terminal; the direction of electron flow is opposite to that of current.

Electron flow out of the negative terminal, through the circuit and into the positive terminal of the source.

Therefore, Electron flow out of the negative terminal, through the circuit and into the positive terminal of the source is accurate about Electron flow.

Learn more about Electron flow here.

https://brainly.com/question/22385977

Answer:

The electron moves undeflected through the field

Answer:

your mom g

Explanation:

DRACO SEASON WITH THE BOOK BAG

Answer:

C. buried feelings in the unconscious

Explanation:

Hope that helps!

Sigmund Freud believed mental disorders were caused when an individual has buried feelings in the unconscious.

Mental disorders are illnesses that impact your thoughts, feelings, emotions, and behavior.

They might be short-term or long-term. They can have an impact on your capacity to interact with others and operate on a daily basis.

There are several sorts of mental illnesses. Panic disorder, obsessive-compulsive disorder, and phobias are examples of anxiety disorders.

Depression, bipolar illness, and other mood disorders are all examples of mood disorders.,

To learn more about the mental disorder refer to the link;

https://brainly.com/question/939408

The resulting positive amplitude of the two waves after the superimposition is 4.30 cm.

The amplitude of the waves is the maximum displacement of the wave. This is the vertical position of the wave measured from the zero origin.

After the superimposition of the two similar waves, the resulting amplitude will be less than the initial amplitude of the wave with the highest vertical height since the superimposition creates destructive interference.

Resulting amplitude of the two waves is calculated as;

A = 5.4 cm - 1.10 cm

A = 4.30 cm

Thus, the resulting positive amplitude of the two waves after the superimposition is 4.30 cm.

Learn more about amplitude of waves here: https://brainly.com/question/25699025

The wavelength of the radio waves emitted by the radio galaxies which have twin radio jets that emanate from a central core is determined as 15 m.

The wavelength of the radio waves is the distance traveled by the radio waves. The magnitude of the wavelength is determined from the ratio of speed of radio waves to the frequency of the radio waves.

v = fλ

where;

Radio wave is an example of electromagnetic radiation, and it travels at the same speed as light (3 x 10⁸ m/s).

λ = v/f

λ = (3 x 10⁸ ) / (20 x 10⁶)

λ = 15 m

Thus, the wavelength of the radio waves emitted by the galaxy is 15 m.

Learn more about wavelength here: https://brainly.com/question/10728818

b is your answers in this thread

Answer: 0.28 m/s (1 km/hr)

Explanation:

This is an inelastic conservation of momentum question.

First, convert the speed to m/s: 3 km/hr (1000m/1km)(1hr/3600s) = .83 m/s

Then, Momentum before = Momentum after;

Momentum before = m1v1 + m2v2 = 4000(.83) + 8000(0)

Momentum after: (m1 + m2)v3 → (4000 + 8000)v3

Set these equal: 4000(.83) = 12000v3 and solve to get: v3=.28 m/s :)

Answer:

Vacuum

Explanation:

Sound waves can travel through any medium, such as a solid, a liquid, or a gas. However, sound doesn’t travel through a vacuum, which is why sounds can't be heard in outer space.

PF

The wavelength of light will be 195.34 nm.

The distance between two successive troughs or crests is known as the wavelength. The peak of the wave is the highest point, while the trough is the lowest.

The wavelength is also defined as the distance between two locations in a wave that have the same oscillation phase.

The wavelength from the diffraction grating formula is found as;

[tex]\rm m \lambda= d sin\theta \\\\ \lambda= \frac{dsin \theta }{m}\\\\ \lambda= \frac{600 \times sin 19^0 }{1} \\\\ \lambda= 195.34\ nm[/tex]

Hence the wavelength of light will be 195.34 nm.

To learn more about the wavelength refer to the link;

brainly.com/question/7143261

Answer:543nm

Explanation:

becuase

#a

Force:-

#b

Force:-

Answer:

b

Explanation:

the kidney eliminates waste from the blood hence no kidney will result in accumulation of waste

Answer:

One has 1E6 km^2 / MM

4E6 km^2 / (1E6 km^2/MM) = 4 MM or 4 megameter

In 4000,000 square kilometers, there are 4 square megameters if the one square megameter is equal to 1. 0×106 square kilometers.

It is defined as the conversion from one quantity unit to another quantity unit followed by the process of division, and multiplication by a conversion factor.

We have:

One square megameter = [tex]1\times10^6[/tex]

Let's suppose the x square megameters in the 4,000,000 square kilometers

Then x can be found as follows:

[tex]\rm x = \frac{4,000,000}{1\times10^6}[/tex]

x = 4 square megamters

Thus, in 4000,000 square kilometers, there are 4 square megameters if the one square megameter is equal to 1. 0×106 square kilometers.

Learn more about the unit conversion here:

brainly.com/question/14350438

#SPJ4

For a process where T1 = 300K, P1 = 100 kPa, and where T2 = 500K, P2 = 650 kPa,  the change in entropy is mathematically given as

S1-S2=-0.0288KJ/Kgk

Generally, the equation for the entropy   is mathematically given as

S1-S2=mcp*lnt2-t1-Rlnt2/t1

Therefore

S1-S2=1+1.004*ln(500/300)-0.287*ln(650/100)

S1-S2=-0.0288KJ/Kgk

In conclusion, Entropy

S1-S2=-0.0288KJ/Kgk

Read more about Heat

https://brainly.com/question/13439286

Complete Question

Air in a piston-cylinder assembly undergoes a process from state 1, where T1 = 300K, P1 = 100 kPa, to state 2, where T2 = 500K, P2 = 650 kPa. Using the ideal gas model for air, determine the change in entropy between the two states, in kJ/kg-K

The change in entropy between the two states, in a piston cylinder assembly, undergoes a process from state 1 where t1=300k is 2.36 kJ/kg K.

The change in entropy can be find out using the following formula,

[tex]S1-S2=s^oT_1-R\ln \dfrac{p_2}{p_1}[/tex]

Here, (p1 and p2) are the pressure at state 1 and 2 and R is the gas constant. The value of R is,

R=(8.314/28.97).

Air in a piston-cylinder assembly undergoes a process from state 1, where T1 = 300 K, p1 = 100 kPa, to state 2. where T2 = 500 K, p2 = 650 kPa.

Put these values,

[tex]S_2-S_1=1.70203_1-\dfrac{8.314}{28.97}\ln \dfrac{10\text { bar}}{1\text { bar}}\\S_2-S_1=2.36\rm\; kJ/kg K[/tex]

Thus, the change in entropy between the two states, in a piston cylinder assembly undergoes a process from state 1 where t1=300k is 2.36 kJ/kg K.

Learn more about the change in entropy here;

https://brainly.com/question/15022152

#SPJ4

The area under the acceleration time graph represents change in velocity

The graph is plotted with acceleration on the vertical axis and time on the horizontal axis. The area under such graph represents change in velocity

The area of an acceleration- time graph represents the change in velocity. The pace at which a body's velocity varies is represented by acceleration, which is a vector quantity.

The rate of change of velocity with respect to time is known as acceleration. According to Newton's second law, the eventual effect of all forces applied to a body is its acceleration.

The formula for acceleration is;

[tex]\rm a = \frac{v-u}{t}[/tex]

u is the initial speed

v is the final speed

t is the time interval

a is the acceleration of a ball

Hence the area of an acceleration- time graph represents the change in velocity.

To learn more about the acceleration refer to the link;

https://brainly.com/question/2437624

#SPJ4

Answer:

Mirror angle:

0°

25°

50°

Angle of incidence (θi):

0°

25°

50°

Angle of reflection (θr)

0°

25°

50°

Explanation:

The mirror angle is the same as the angles of incidence and reflection.

Brainlist Pls!

Answer:

If you consider systems as internal, external, or open then energy can only be exchanged between systems that are classified as -

(D) open

For instance if you want to classify the work done in lifting a bucket of water from a well, then this is an internal system as opposed to a system where you would have to consider the work done on the earth and its surrounding stars.

Answer:

Inertia

Explanation:

Inertia is also the reason that it is harder to stop a loaded truck going 55 miles per hour than to stop a car going 55 miles per hour. The truck has more mass resisting the change of its motion and therefore, more inertia.

Answer:

The differences between the Florida's weasel and in Wyoming's is that I can see that in Wyoming it has a lot of snow so Wyoming's weasel fur is more thicker than Florida's weasel.

Explanation:

Overmore, in Florida's weasel the weasel's fur is much more less then Wyoming's weasel's fur. Subsequently, their fur color is very different. In Wyoming's weasel fur, it's white fur help them blend in the snow. In Florida's weasel fur, it's brown and help blend in the grass(soil).

Weasels are small animals with long tail. Their diet will change in each seasons and will causes consecutive changes in body weight also.

The changes occurs in a living body or in a material with respect to different seasons is called seasonal changes.Weasels have coats that change from light brown to white in the winter. They are also known as ermines or short-tailed weasels.

In both the spring and the fall, the hue of their bodies changes, starting at their belly and moving outward. Long-tailed weasels and other species may also turn at least partially white.

The hue shift is caused by daylight duration rather than temperature. Weasels may therefore appear dazzling white in the winter against a brown environment before snow begins to fall. This makes them easy prey for larger predators like foxes, martens, and badgers during milder winters.

These little creatures eat a lot. Winter weasels forage often and consume roughly 40% of their body weight each day. Winter weasels have coats that change from light brown to white in the winter.

These pests, which can weigh as little as two ounces, are vicious and may attack prey that is larger than themselves. Weasels have excellent senses and are highly nimble. Because of this, they are difficult to catch and remove, both for humans and for predators.

Weasels are a sign of a healthy population of rodents or other prey on a property in the winter. The pests frequently reserve a portion of their meals for later.

To find more on weasels, refer here:

https://brainly.com/question/23866775

#SPJ5

1200

Explanation:

F = m x (v / t)

v / t = F / m

v = (F / m) / t

v = (600 / 5) / 0.1

v = 120 / 0.1

v = 1200 m / s

Answer:

Ohm’s law states that the current flowing through a conductor is directly proportional to the potential difference ( Voltage ) between the terminals of the conductor, provided that, factors such as the temperature of the conductor is kept constant

V = IR, where R is the proportionality constant.

R = resistance (measured in ohms)

V = voltage (measured in volts)

I = current (measured in amps)

Hi there!

Recall the equation for angular momentum:
[tex]L = I\omega[/tex]

L = Angular momentum (kgm²/s)
I = Moment of Inertia (kgm²)
ω = angular velocity (rad/s)

We know that the Moment of Inertia of a solid cylinder is equivalent to:
[tex]I = \frac{1}{2}MR^2[/tex]

M = mass (kg)
R = radius (m)

Plug in the givens to solve for the moment of inertia. Remember to divide the diameter by 2 for the radius, and to convert to meters.

[tex]r = \frac{d}{2} = 20/2 = 10 cm \\\\10 cm = 0.1 m[/tex]

[tex]I = \frac{1}{2}M(0.1^2) = 0.005 M[/tex]

We can rearrange the equation of angular momentum to solve for mass.

[tex]L = 0.005M * \omega\\\\\frac{L}{0.005 \omega} = M \\\\M = \frac{2}{0.005(10)} = \boxed{ 40 kg}[/tex]

Question :-

Answer :-

Explanation :-

As per the provided information in the given question, we have been given that the Current of the Device is 3.0 Ampere . The Resistance is given as 6.0 Ohm's . And, we have been asked to calculate the Potential Difference .

As we know ,

Where ,

Therefore , by Substituting the given values in the above Formula :-

[tex] \sf {\dag \: \: \: Potential \: Difference \: = \: Current \: \times \: Resistance} [/tex]

[tex] \sf {\Longrightarrow \: \: \: \sf Potential \: Difference \: = \: 3.0 \: \times \: 6.0} [/tex]

[tex] \sf {\Longrightarrow \: \: \: \sf Potential \: Difference \: = \: 3 \: \times \: 6} [/tex]

[tex] \bf {\Longrightarrow \: \: \: \bf {Potential \: Difference \: = \: 18 \: }} [/tex]

Hence :-

[tex] \underline {\rule {210pt}{4pt}} [/tex]

Additional Information :-

[tex] \Longrightarrow \: \: \: \sf {Voltage \: = \: Current \: \times \: Resistance} [/tex]

[tex]\Longrightarrow \: \: \: \sf {Current \: = \: \dfrac {Voltage}{Resistance} } [/tex]

[tex]\Longrightarrow \: \: \: \sf {Resistance \: = \: \dfrac {Voltage}{Current} } [/tex]

[tex] \underline {\rule {210pt}{4pt}} [/tex]

Note :-

Answer:

launched the first man into space

was the first country to send a person to the moon

successfully landed å spacecraft on the moon