Answer:
silver
Explanation:
The most electrically conductive element is silver, followed by copper and gold. Silver also has the highest thermal conductivity of any element and the highest light reflectance.
Answer:
A. copper
Explanation:
edge 2021
PLEASE HELP!!!!!!!!
Step 4: Create Lewis dot diagrams.
a) Draw Lewis dot diagrams of the reactants and products on the paper with your chemical equation.
b) Select a different color to use for each element in the chemical reaction. Use your chosen color
for the element’s symbol and for its valence electrons.
c) Label these diagrams “Lewis Dot Diagrams.”
Answer:
Hey student your question is not proper arrange, i don't understand what you want us to do
SOMEONE HELP ME PLEASE ILL GIVE BRAINLY!
Is the following picture an example of a chemical change or a physical change?
A chemical change, because the atoms are rearranging to form new molecules.
A physical change, because the molecules are staying the same.
A chemical change, because the molecules are staying the same.
A physical change, because the atoms are rearranging to form new molecules.
Answer:
It would be a physical change, because the atoms are rerranging to form new molecules!
Explanation:
The sum of the protons and neutrons in an atom equals the?
nucleus number
atomic number
atomic mass
mass number
Answer:
mass number
Explanation:
The sum of the protons and neutrons in an atom equals the mass number of such an atom.
Mass number is the mass of an atom. The mass of an atom is concentrated in the nucleusThe particles in the nucleus are the protons and neutrons.So;
Mass number = number of protons + number of neutrons.
please help me..........
Answer:
4/6
6/9
8/12
Explanation:
What is Jadi? is it goat? what language is Jadi?
A bus travels a distance 150km
in 5 hours where as another bus travel 200km in
6 hours which bus travel fast
Answer: The bus traveling 200km in 6 hours is traveling the fastest.
Explanation:
Bus 1
150km/5hrs
Simplify -> 30km/hr
Bus 2
200km/6hrs
Simplify -> About 33.333km/hr
When the following equation is balanced, what is the coefficiant for Br?
___I2 +___NaBr rightwards arrow___NaI +_?_Br2
A.
6
B.
3
C.
1
D.
2
1 points
QUESTION 10
The previous question is an example of what type of chemical reaction?
A.
Synthesis
B.
Decomposition
C.
Single Re-Placement
D.
Double Re-Placement
Answer:
1. A 2. C
Explanation:
because it just is
Under a certain set of conditions, the percent yield of a reaction that produces carbon dioxide is 75.0%. What mass in grams of CO2 will actually be recovered if the theoretical yield is 26.7 grams?
Answer:
Actual yield = 20.03g
Explanation:
[tex]% yield = 100.\frac{actual yield}{theoretical yield}[/tex]% [tex]yield[/tex] = [tex]100. \frac{actual \ yield}{theoretical \ yield}[/tex]
Actual yield = % yield.(theoretical yield) / 100
Actual yield = 75.26.7/100
Actual yield = 20.025
Answer: I got 20.025 and then I rounded it to 20.0
Explanation:
How do I graph these question
a. Explain why bicycle tires seem higher in the summer than in winter.
b. Explain why a can of soda pop explodes if left in the hot sun.
c. A rigid container filled with a gas is placed in ice (ex. nalgene bottle). What will happen to the pressure of the gas? What do you think will happen to the volume?
d. An infected tooth forms an abscess* that fills with gas. The abscess puts pressure on the nerve of the tooth, causing a toothache. While waiting to see a dentist, the person with the toothache tried to relieve the pain by treating the infected area with moist heat. Will this treatment help? Why or why not?
PLEASE HELP ME !!!!!!!
Answer:
it would be 5,045
Explanation:
because it is closer to 5,000. pls correct me if wrong
2. What properties do all acids have?
3. Why should you never use taste as a method for testing an unknown substance?
4. What is used to detect the presence of acids?
10. What can you use to detect the presence of a base?
11. What are some common bases that we use every day?
12. How does an antacid help reduce heartburn?
13. What happens when acid and base are mixed
14. What is used to determine the pH of a substance?
15. Describe how the pH scale works. In other words, what is it actually measuring?
17. Why is pH important to our environment?
18. Describe how salt is formed.
Pls help!!!!!
Which is more electrically negative? 1)C 2)P or 3)S
GUYS PLEASE HELP!!! :((
Answer:
3 sulphur is more electrically –
In your own words, please explain how to name acids.
Answer:
Acids are named based on their anion — the ion attached to the hydrogen. In simple binary acids, one ion is attached to hydrogen. Names for such acids consist of the prefix “hydro-“, the first syllable of the anion, and the suffix “-ic”. Complex acid compounds have oxygen in them.
how do i do the chemicals
you have to put them togeter
10 g of copper is heated and the mass increases to 12.5 g. What is the mass of the copper in the new substances?
Answer:
10g
Explanation:
The amount of copper in the heated mass of the new substance produced is still 10g because in any chemical action, mass is always conserved.
According to the law of conservation of matter "matter is neither created nor destroyed in a chemical reaction". The change in mass is only due to oxygen gas that combines with the new copper formed or other substances that joined the mass. The substance will still have the same amount of copper as the original one. Since we started with 10g of copper, we end with 10g of copper.Benzoic acid, C6H5COOH, is another derivative of benzene. The pH of an aqueous solution of benzoic acid at 298 K is 2.95. Determine the concentration of hydroxide ions in the solution,
Answer:
[OH⁻] = 8.91x10⁻¹²M
Explanation:
In aqueous solutions, the [OH] and [H⁺] are associated in the equation of hydrolisis of water:
1x10⁻¹⁴ = [OH⁻] [H⁺]
With pH, we can solve for [H⁺] and obtain, the [OH⁻] using this equation:
pH = -log [H⁺]
[H⁺]= 10^-pH
[H⁺] = 1.122x10⁻³M
1x10⁻¹⁴ = [OH⁻] [1.122x10⁻³M]
[OH⁻] = 8.91x10⁻¹²MDescribe in your own words how the earth's layers were formed.
The layers of the earth were formed due to the sediments that significantly flattens out beside the center of the earth. After a long duration, a new layer is spread over the older layer, and so on.
What are the different layers of the earth?The different layers of the earth are as follows:
The Inner Core: This is the first layer from the center of the earth. The Outer Core: It is found after the inner core. The Mantle: It is the middle layer of the earth. The Crust: It is the outermost layer of the earth.The above-mentioned layers of the earth were formed with the impact of the building blocks of the earth that are remarkably known as Planetesimals, collided, and collapsed.
During that time, the hardest elements like nickel, iron, etc. constitute the core while the lighter elements like carbon, oxygen, silicon, etc. play an essential role in the formation of crust and mantle.
Therefore, the layers of the earth were formed due to the sediments that significantly flattens out beside the center of the earth.
To learn more about The layers of the earth, refer to the link:
https://brainly.com/question/10430823
#SPJ2
Question 14
1 pts
How many moles of NaCl could be found in 0.4 L of a 0.9 M solution? Round your answer to
two decimal places.
Answer:
0.36mol
Explanation:
Given parameters:
Volume of NaCl = 0.4L
Molarity = 0.9M
Unknown:
Number of moles = ?
Solution:
To find the number of moles, the molarity of a solution is the amount of solute contained in a solution.
Molarity = [tex]\frac{number of moles}{volume}[/tex]
Number of moles = molarity x volume
Insert the parameters and solve;
Number of moles = 0.4 x 0.9 = 0.36mol
How did the substance oxygen change the world??
Answer: The atmosphere of Earth wasn't always full of oxygen. ... An accidental mutation would some day change the world forever as these organisms would become able to feed off of the sunlight around them, and produce oxygen in a process known as photosynthesis. This oxygen, which none of these organisms could use, was toxic.
How many orbitals surround the nucleus in a neutral atom of sulfur (S)?
1
3
5
6
What causes rain to precipitate from clouds?
Answer: Precipitation forms in the clouds when water vapor condenses into bigger and bigger droplets of water. When the drops are heavy enough, they fall to the Earth.
Explanation: Have a blessed day!
Answer: Precipitation forms in the clouds when water vapor condenses into bigger and bigger droplets of water. When the drops are heavy enough, they fall to the Earth.
Explanation:hope this helps u
12.
Contrast and compare:
a) ionic and covalent bonding
Answer:
Ionic bonds - an intramolecular force exist in a nonmetal and metal compounds such as NaCl. The Na donate 1 electon to Cl to complete its octet rule.
Covalent bond - an intramolecular force exist in a nonmetal and nonmetal compounds such as bonds O2, Cl2, CO2, sugar, proteins and most of organic compounds and biomolecules by sharing electrons to bond.
There are two types of covalent bonds: polar and nonpolar. Polar bond is a bond between two different nonmetal atoms of different electronegativities. While nonpolar bond is a bond between the same atom or two differenct atoms of the same electronegativities (if there is). Their electronegativities pull will cancel so that their overall polarity is zero.
Question 4 of 10
What is the molarity of a solution of 3 moles (mol) of FeBr3 in 1/2 L water?
A.
3 mol/2L
B.
2L/3 mol
C.
0.5L/3 mol
D.
3 mol/0.5 L
SUBMIT
Answer:
B
Explanation:
Answer:
D. 3 mol/0.5 L
Explanation:
Just took the quiz
Which chemical equation is balanced?
A. CaO2 + HCl → CaCl2 + H20
B. CO2 + H2O + H2CO2
C. K+ H2O → K20 + H2
D. MgO + 2HCI – MgCl2 + H20
10 points if you answer fast
D. MgO + 2HCI – MgCl2 + H20
Further explanationThe chemical equation is said to be balanced if the number of atoms in the reactants is equal to the number of atoms in the product
A. CaO2 + HCl → CaCl2 + H20
atoms O, Cl and H are not the same
B. CO2 + H2O + H2CO2
atoms O are not the same
C. K+ H2O → K20 + H2
atoms K are not the same
D. MgO + 2HCI – MgCl2 + H20
Mg, left = 1, right=1
O, left=1, right=1
H, left=2, right=2
Cl, left=2, right=2
Chemical equation is balanced
Answer:
B. CO2 + H2O + H2CO2
Explanation:
I WILL GIVE BRANLIEST What factor is the temperature in an ecosystem? Abiotic or Biotic?
Answer:abiotic .
Explanation:
how is a solute and a solvent different
A very hot cube of copper metal (32.5 g) is submerged into 105.3 g of water at 15.4 0C and it reach a thermal equilibrium of 17.3 0 Calculate the initial temperature of copper (Cs = 0.385 J/g 0C for copper, and 4.18 J/g 0C for water).
Answer:
The initial temperature of the metal is 84.149 °C.
Explanation:
The heat lost by the metal will be equivalent to the heat gain by the water.
- (msΔT)metal = (msΔT)water
-32.5 grams × 0.365 J/g°C × ΔT = 105.3 grams × 4.18 J/g °C × (17.3 -15.4)°C
-ΔT = 836.29/12.51 °C
-ΔT = 66.89 °C
-(T final - T initial) = 66.89 °C
T initial = 66.89 °C + T final
T initial = 66.89 °C + 17.3 °C
T initial = 84.149 °C.
A wave is a _____that transfers _____ through a ______
A.) medium, disturbance, energy
B.) disturbance, energy, medium
C.) energy, disturbance, medium
D.)disturbance, medium, energy
A wave is a disturbance that transfers energy through a medium. There
are types of such as sound and light waves.
A wave involves the transfer of energy such as sound, light waves etc
through a medium. The medium could be through liquids , solids or air and
they have characteristic waves which pass through them.
When a wave transfers energy through a medium, the matter involved
doesn't experience any type of movement.
Read more on https://brainly.com/question/19210453
What igneous rock is non-vesicular and glassy in texture and has a mafic composition?
Answer:
igneous rock
Explanation:
I WILLL GIVE YOU BRAINLYESTTT PLEASE HELPPPP
Answer:
10.99s
Explanation:
Given parameters:
Speed of the fly = 9.1m/s
Distance flown = 100m
Unknown:
Time taken to fly this distance = ?
Solution:
Speed is distance divided by the time;
Mathematically;
Speed = [tex]\frac{distance}{time}[/tex]
Time = [tex]\frac{distance}{speed }[/tex]
Insert the parameters and solve;
Time = [tex]\frac{100}{9.1}[/tex] = 10.99s
How can air quality be fine on one day and hazardous on the next? What
are some things that can cause a rapid change in air quality? *
Answer:
Air Current
Explanation:
Say I am in California and there is a massive fire next to me but not close enough to me to really see the fire and the next day I see no fire but theres a ton of ash in the sky, this can be due to the wind current taking the smoke from the fire into my direction and that smoke falling in my area. So basically a wind current can take the smoke from a fire into another destination and cause a rapid change in air quality in a day.