which diver will experience more pressure: A scuba diver at 10 meters or one at 100 meters below at the surface of the water

acidic in naturenature

Generally, Oxides of non-metals are acidic in nature. When non-metals are reacted with water it forms an acidic solution. The common oxides of Sulphur, Selenium, and Bromine are strongly acidic.

Explanation:

it can damage satellites cuase there in space and are not protected by earth

Answer:

diseases where microbes are the immediate cause are called infectious diseases. Infectious diseases are disorders caused by organisms — such as bacteria, viruses, fungi or parasites. Many organisms live in and on our bodies. They're normally harmless or even helpful.

Answer:

This is my own explanation:

Explanation:

It is important to know the mixtures you input together because you may determine the type of substance you produced from different elements and several combinations of matter. This assists in identifying your specific substance.

Answer:

The sum of the kinetic energies and potential energies of all of the molecules in a substance is called the thermal energy of the substance.

The reaction equation must first be put down and the stiochiometry is used to calculate the mass of the bicarbonate produced as 0.11 g.

A reaction refers to the transformation of reactants into products. We have the equation of this reaction as;

CO2 + H2O ---->H2CO3

If 1 mole of CO2 gas occupies 22400mL

x moles of CO2 occupies 40 mL

x = 0.0018 moles

If 1 mole of CO2 yields 1 mole of bicarbonate

0.0018 moles yields 0.0018 moles of bicarbonate

Mass of bicarbonate = 0.0018 moles * 61 g/mol = 0.11 g

Learn more about bicarbonate: https://brainly.com/question/8560563

Saturated solution refer to a solution in which the dissolved solute is in equilibrium with the undissolved solute.

A saturated solution is a chemical solution that contain maximum amount of a solute which is dissolved in the solvent. The addition of anotheg solute will not dissolve in a saturated solution. The amount of solute that can be dissolved in a solvent to form a saturated solution depends on a variety of factors.

Therefore, Saturated solution refer to a solution in which the dissolved solute is in equilibrium with the undissolved solute

Learn more about saturated solution here.

https://brainly.com/question/26765872

The term that describes a solution in which the dissolved solute is in equilibrium with the undissolved solute is saturated solution.

A saturated solution is one in which there is so much solute that it would not dissolve if there was anymore.

When a saturated solution comes into contact with more solute, the extra solute does not dissolve or deposit.

Thus, the term that describes a solution in which the dissolved solute is in equilibrium with the undissolved solute is saturated solution.

Learn more about saturated solutions

https://brainly.com/question/1851822

#SPJ4

Is this a true or false question? If so, then this would be a true statement. Synthetic materials are made in factories, and the usage of factories increases the risks of harmful gases and chemicals that negatively impacts Earth.

It is generally true that as consumption of a synthetic material increases, the associated negative impacts to Earth needed to produce the material also increase.

This is because the production of synthetic materials often requires the extraction and processing of non-renewable resources, such as petroleum, which can have a range of negative environmental impacts, including habitat destruction, air and water pollution, and greenhouse gas emissions.

Additionally, the disposal of synthetic materials can also lead to environmental problems, such as the accumulation of non-biodegradable waste in landfills and oceans.

However, it is important to note that not all synthetic materials have the same environmental impacts, and some materials may be more sustainable than others depending on their production methods and intended use. Hence, the given sentence is true.

Learn more about synthetic material, here:

https://brainly.com/question/24357817

#SPJ3

Your question is incomplete, most probably the full question is this:

True or false. As consumption of a synthetic material increases, the associated negative impacts to Earth required to produce the material increase.

The molarity of the NaCl in the 250 ml slat solution is 2.8M.

The molarity of a solution is defined as the concentration of a solute per unit volume of the solution.

Given, the volume of the solution is 250 ml converted into l 0.25

The number of moles of NaCl is 0.70.

By the formula  of molarity

[tex]M = \dfrac{n}{V}\\\\\\M = \dfrac{0.70}{0.25} = 2.8 M[/tex]

Thus, the molarity is 2.8 M.

Learn more about molarity

https://brainly.com/question/14693949

Balanced equation: 2 HI --> I2 + H2

Explanation:

HI-

H = 1 x 2 = 2

I = 1 x 2 = 2

H2-

H = 2

I = 2

Answer:

24.7

Explanation:

Answer: ~24.72in

Explanation:

1 inch = 2.54 centimeters

divide 62.8cm by 2.54 which gives us approximately 24.72in.

hope this helped! ♡

Answer:

covalent bond- a chemical bond that is the sharing of electron pairs between atoms

Apply Charles law

[tex]\\ \bf\bull\rightarrowtail V1T2=V_2T1[/tex]

[tex]\\ \bf\bull\rightarrowtail 10(20)=25V_2[/tex]

[tex]\\ \bf\bull\rightarrowtail 200=25V_2[/tex]

[tex]\\ \bf\bull\rightarrowtail V_2=8L[/tex]

Answer:

hope it's helpful to you

Answer:

B

Explanation:

The electrons in all noble gases are filled with electrons and don't need to involve in a reaction to gain or loss

The answer A is wrong because not all of them has same number of protons equal the neutrons

Answer C is wrong because we can see helium with 2 electrons in outer shell

and Answer D is wrong as we say above each atom doesn't need to react with another to be stable

Answer:

A. Things are measured the same way each time.

Explanation:

Because gathering it leaves a negative impact on natural habitats.

Based on the functional groups present in organic compounds, the compound formed from adding hydroxy and hydrogen substituents to carbon atoms is an alcohol.

Alcohols are organic compounds whose functional group is the hydroxy radical.

The simplest alcohol is methanol whose molecular formula is CH3OH.

The hydroxy group in alcohols are responsible for their properties such as:

Therefore, the compound formed from adding hydroxy and hydrogen substituents to carbon atoms is an alcohol.

Answer/Explanation:

Stars spend the majority of their lifespan medling hydrogen nuclei together to form helium. When the hydrogen that in the core of the star begins to run out, the star will start using hydrogen away from its core and this is what causes the star's outer layer to expand and slowly cool down.

I hope this helps!

-No one

Answer:

I recently answered this question. The response I submitted is included below. I beleive my answer should be correct.

Explanation:

Question 1:

C: 48.38g(1mol/12g) = 4.0317 

H: 8.12g(1mol/1.01g) = 8.12

O: 53.5g(1mol/16g) = 3.34375

Divide by the smallest amount (3.34375)

C = 4.0317/3.34375 = 1.206 = 1

H = 8.12/3.34375 = 2.42 = 2

O = 3.34375/3.34375 = 1

Empirical formula = CH2O

Question 2:

Molecular formula = n(empirical formula)

n = molar mass (compound)/molar mass (empirical)

Empirical formula: CH2O

Molar mass of CH2O = 12 + 2x1 + 16 = 30 g/mol

Molar mass of compound: 180.15 g/mol

[tex]n=\frac{180.15g/mol}{30g/mol}= 6[/tex]

Molecular formula = C6H12O6

The molar mass of the gas that has a mass of 3.82 g and occupies a volume of 0.854 L is 106.66g/mol.

The molar mass of a substance can be calculated by dividing the mass of the substance by its number of moles.

However, the number of moles of the gas in this question needs to be calculated first using the ideal gas law equation:

PV = nRT

Where;

1.04 × 0.854 = n × 0.0821 × 302

0.888 = 24.79n

n = 0.888/24.79

n = 0.036mol

Molar mass of gas = 3.82g/0.036mol

Molar mass = 106.66g/mol

Therefore, the molar mass of the gas that has a mass of 3.82 g and occupies a volume of 0.854 L is 106.66g/mol.

Learn more about molar mass at: https://brainly.com/question/12127540

Explanation:

CO2 is called as gas because it exist in single thermodynamics state i.e CO exist in gases state only at room temperature.

The atom that moves at its rms velocity at 100°C with a wavelength of 2.31 * 10 m is : SULPHUR ( s )

To determine the atom we will have to determine the molar mass of the atom

Applying De Broglie equation

λ = h / mv

Vrms = [tex]\sqrt{\frac{3RT}{M} }[/tex]  ---- ( 1 )

Where : λ  = 2.31 * 10⁻¹¹,  R = 8.314 J / k.mol,  T = 373 K, h = 6.626 * 10⁻³⁴ J.s

From equation ( 1 )

M = ( h² Ua ) / 3RT*λ² --- ( 2 )

where : Ua ( mass of an atom ) = 6.022 * 10²³,  h = 6.626 * 10⁻³⁴,  R = 8.314 J / k.mol, λ  = 2.31 * 10⁻¹¹,    T = 373 K

Insert values into equation ( 2 )

M ( molar mass ) = 32 g/mol

Sulphur has a molar mass of 32 g/mol therefore the atom is sulphur.

Hence we can conclude that The atom that moves at its rms velocity at 100°C with a wavelength of 2.31 * 10 m is : SULPHUR ( s ).

Learn more about sulphur : https://brainly.com/question/26328290

Answer: Chlorine gas is produced when sulfuric acid is mixed with chlorine bleach.

Explanation:  This reaction is a function of the change in pH of the solution from alkaline to acidic combined with the strong oxidant properties of hypochlorous acid.

Answer:

With the European Climate Law, the EU committing to carbon neutrality by 2050. What does that mean in practice?

Climate change is already affecting the entire world, with extreme weather conditions such as drought, heat waves, heavy rain, floods and landslides becoming more frequent, including in Europe. Other consequences of the rapidly changing climate include rising sea levels, ocean acidification and loss of biodiversity.

In order to limit global warming to 1.5 degrees Celsius – a threshold the Intergovernmental Panel for Climate Change (IPCC) suggests is safe – carbon neutrality by mid-21st century is essential. This target is also laid down in the Paris agreement signed by 195 countries, including the EU.

In December 2019, the European Commission presented the European Green Deal, its flagship plan that aims to make Europe climate neutral by 2050. This target will be reached through the European Climate Law that sets climate neutrality into binding EU legislation.

Explanation:

ok bet i got u

Answer:

The element that is commonly used to reduce iron oxide would be carbon.

Explanation:

:)

Iron oxide is reduced to a lower oxide or metal by gaseous carbon monoxide or solid carbon.

Reduction is defined as the chemical reaction which involves addition of hydrogen or removal of oxygen or gain of electrons.

For example,

2Na + H2 → 2NaH (addition of hydrogen)

CuO + H2 → Cu + H2O(removal of oxygen)

Fe3+ + e- → Fe2+ (gain of electron)

Above example of reduction reaction is when oxygen reacts with iron to form rust. In this reaction oxygen is reduced because it accepts electrons from iron, which is oxidized.

Thus, Iron oxide is reduced to a lower oxide or metal by gaseous carbon monoxide or solid carbon.

Learn more about Reduction, here:

https://brainly.com/question/14698511

#SPJ2

2Na + 2H2O → 2NaOH + H2

The balanced equation

Answer:

300

Explanation:

because it's not highly concentrated

Even a small increase can have devastating effects on coastal habitats farther inland, it can cause destructive erosion, wetland flooding, aquifer and agricultural soil contamination with salt, and lost habitat for fish, birds, and plants.

Explanation:

I hope this helps

114°

Explanation:

ΔE = mcΔT

ΔE = 5(0.38)(80 - 20)

ΔE = 1.9(60)

ΔE = 114°