Answer: A single replacement reaction looks sort of like this
A + BC —> AC + B
Explanation: It would be a LOT more helpful for us if you had provided the answer choices for this question, but I'll try to help by explaining WHAT single-replacement reactions are.
Single-replacement reactions are reactions in which one ion displaces another to form a new compound . One reactant is an element; one reactant is a compound . One product is an element; one product is a compound . The reactant element is part of the compound product .
I hope this helped!
a muscle fiber contracts when myosin filaments pull actin filaments closer together and thus shorten sarcomeres within a fiber. When all the sarcomeres in a muscle fiber shorten, the fiber contracts
Answer:According to the sliding filament theory, a muscle fiber contracts when myosin filaments pull actin filaments closer together and thus shorten sarcomeres within a fiber.
Explanation:
No need for an explanation if i just answered it
If an orange is orange, why isn’t a lime called a green or a lemon called a yellow?
Answer:
woowwwww.... ur right Imao
Explanation:
Shower thoughts be like*
Which of the following does not represent an aspect of an environmentally
sustainable society?
Answer:A = $90
B = $390
Explanation:
The aspect of the environmentally sustainable society has not been soil erosion.
An environmentally sustainable society has been the one that has been able to meet the current and future needs of the generation. The plantation of trees, reducing the greenhouse effect, and the method for the generation of a sustainable environment has been the characteristic of a sustainable society.
The soil erosion results in damage to the soil with the flow of the upper layer of soil from the water flow. The soil erosion will be resultant in damage to the environmentally sustainable society.
For more information about environmentally sustainable society, refer to the link:
https://brainly.com/question/17666127
science vocab (image attached)
Answer:
Solution-a liquid mixture in which the minor component (the solute) is uniformly distributed within the major component (the solvent).
solvent- able to dissolve other substances.
solute- the minor component in a solution, dissolved in the solvent.
colloid- a homogeneous noncrystalline substance consisting of large molecules or ultramicroscopic particles of one substance dispersed through a second substance. Colloids include gels, sols, and emulsions; the particles do not settle, and cannot be separated out by ordinary filtering or centrifuging like those in a suspension.
suspension- is a heterogeneous mixture that contains solid particles sufficiently large for sedimentation.
Explanation:
What is the name of the "invisible force" that holds you to Earth's surface
Answer:
Gravity
Explanation:
Answer: gravity
Explanation: gravity has is an “invisible force” that holds matter down instead of floating off into space.
What element has the noble gas configuration [Ne]3s23p??
Answer:
Sulfur
Explanation:
The first ten electrons of the sodium atom are the inner-shell electrons and the configuration of just those ten electrons is exactly the same as the configuration of the element neon (Z = 10).
...
Noble Gas Configurations.
Element Name Sulfur
Symbol S
Atomic Number 16
Noble Gas Electron Configuration [Ne]3s23p4
What effect does the transfer of electrons have on the nuclei of the atoms involved?
Answer:
Chemical processes have no effect on the nucleus otherwise we would be in deep truble. GOOD LESSONS ♡
True or False: The polar zones on Earth are near the equator
it is for sure sure false
Answer:
False they are on the extremes of the earth they are poles they are so cold the temp is freezing there and near the equator it would hot
whats the reason you can float a paperclip on water?
Answer:
because it is not a rock and it is not thick so it can float
Explanation:
because it is thin and light
The Henry's law constant for helium gas in water at 30 ∘C is 3.7×10−4M/atm; the constant for N2 at 30 ∘C is 6.0×10−4M/atm.
a. If helium gas is present at 2.1 atm pressure, calculate the solubility of this gas.
b. If N2 is present at 2.1 atm pressure, calculate the solubility of this gas.
Answer:
a. 7.8 × 10⁻⁴ M
b. 1.3 × 10⁻³ M
Explanation:
We can calculate the solubility of a gas using Henry's law.
S = k × P
where,
S: solubility of the gask: Henry's law constantP: pressure of the gasa. Determine the solubility of He
S = k × P
S = 3.7 × 10⁻⁴ M/atm × 2.1 atm
S = 7.8 × 10⁻⁴ M
a. Determine the solubility of N₂
S = k × P
S = 6.0 × 10⁻⁴ M/atm × 2.1 atm
S = 1.3 × 10⁻³ M
You have 3.00 L of a 3.12 M solution of NaCl(aq) called solution A. You also have 2.00 L of a 2.00 M solution of AgNO3(aq) called solution B. You mix these solutions together, making solution C.
Calculate the concentration (in M) of Ag+ ions in solution C.
Answer:
[tex]M=0.8M[/tex]
Explanation:
Hello!
In this case, since the presence of silver ions is in AgNO3 only, we can compute their moles by using the volume and concentration of the corresponding salt:
[tex]n_{Ag^+}=2.00L*2.00\frac{mol}{L}=4molAg^+[/tex]
Next, since the total volume of solution C is 5.00 L, the required concentration of silver ions turn out:
[tex]M=\frac{4.00mol}{5L} =0.8M[/tex]
Best regards!
Which of the following shows correctly an ion pair and the correct formula for the ionic compound the two ions form?
A) Cu1+, O2–; CuO
B) Cr3+, I–; CrI
C) Sn4+, N3–; Sn4N3
D) Fe3+, O2–; Fe2O3
Answer:
D) Fe³⁺, O²⁻; Fe₂O₃
Explanation:
Option D shows correctly an ion pair and the correct formula for the ionic compound the two ions form.
Ion pairs of iron and oxygen react to form iron (III) oxide. The iron (III) oxide is one of the oxides of iron. The compound is usually attacked by acids and it is often called rust. It is used in the feedstock of the steel and iron industries. This means that the compound is used in the production of iron, steel, and many alloys.
Below are some equations:
4 Fe + 3 O₂→ 2 Fe₂O₃
Fe⁰ + 3O₂⁰ → Fe³⁺O₃²⁻
What pH scale number represents a neutral.
What pH scale number represents a neutral.
The answer is 7
You have 3.00 L of a 3.74 M solution of NaCl(aq) called solution A. You also have 2.00 L of a 2.00 M solution of AgNO3(aq) called solution B. You mix these solutions together to make solution C. Calculate the concentration (in M) of Cl ions in solution C.
Answer:
[tex]M=2.24M[/tex]
Explanation:
Hello!
In this case, since the molarity and volume of the solutions are given, we are able to compute the moles of chloride ions as they are present in NaCl only:
[tex]n_{Cl^-}=3.00L*3.74\frac{molNaCl}{L}*\frac{1molCl^-}{1molNaCl} =11.22molCl^-[/tex]
Next, since the mixing of solution A and B lead to a volume of 5.00 L, the concentration of chloride ions turns out:
[tex]M=\frac{11.22mol}{5.00L}=2.24M[/tex]
Best regards!
NEED HELP ASAP!!! I just need to know the order
How many moles of O2 are needed to burn 2.56 moles of CH3OH?
Answer:
[tex]n_{O_2}=3.84molO_2[/tex]
Explanation:
Hello!
In this case, since the combustion reaction of methanol is:
[tex]CH_3OH+\frac{3}{2} O_2\rightarrow CO_2+2H_2O[/tex]
In such a way, since there is 1:3/2 mole ratio between methanol and oxygen, we can compute the moles of oxygen that are needed to burn 2.56 moles of methanol as shown below:
[tex]n_{O_2}=2.56molCH_3OH*\frac{\frac{3}{2}molO_2}{1molCH_3OH} \\\\n_{O_2}=3.84molO_2[/tex]
Best regards!
When warm, less dense air ________, an area of low pressure is left behind.
A
rises
B
disappears
C
sinks
D
moves south
Answer:
B
disappears
Explanation:
Bbbbbbbbbb
What are homogeneous mixture and heterogeneous mixture ?
Explanation:
"A homogeneous mixture has the same proportions of its components throughout any given sample and is also referred to as a solution. Conversely, a heterogeneous mixture has components of which proportions vary throughout the sample."
- Wikipedia
ADD NOTE
O QUESTION
1. A student notices that the moon is full one evening. Which sequence of moon phases
will the student observe over the next eight days?
O
Full, waxing gibbous, new, waning crescent
O
Full, waning gibbous, first quarter, waning crescent
O
Full, new, waning gibbous
O
Full, waning gibbous, third quarter
CLEAR AL
oooo
The air in a syringe has volume 25.0 mL
when the pressure is 4.38 atm. What will be
its volume when the pressure is 0.65 atm?
Answer:
168.46 mLExplanation:
The new volume can be found by using the formula for Boyle's law which is
[tex]P_1V_1 = P_2V_2[/tex]
Since we are finding the new volume
[tex]V_2 = \frac{P_1V_1}{P_2} \\[/tex]
From the question we have
[tex]V_2 = \frac{25 \times 4.38}{0.65} = \frac{109.5}{0.65} \\ = 168.46153...[/tex]
We have the final answer as
168.46 mLHope this helps you
What reaction shows a compound breaking apart into separate substances?
A. A single-replacement reaction
B. A synthesis reaction
C. A double-replacement reaction
D. A decomposition reaction
Answer: The answer is decomposition reaction
Explanation: Hope this helps:)
Answer: D. decomposition reaction
Explanation:
How are the cells in our bodies organized? Cells are organized into ______ , _____
, and
_____ systems?
quick answer pls!
Answer:
Cell --> Tissues --> Organs ---> Organ System ---> Organism
What gives yeast cells what it needed to reproduce and grow?
Answer:
Yeasts reproduce asexually by a process called budding (see Figure 8.2. 1 and Figure 8.2. 6). A bud is formed on the outer surface of the parent cell as the nucleus divides.
Explanation:
What do the rows in the Periodic Table tell us?
Answer:
The rows tell you how many shells there are of the atom.
A current of 5.29 A is passed through a Sn(NO3)2 solution for 1.30 h . How much tin is plated out of the solution?
Answer:
15.26 g of tin
Explanation:
Given that the equation of the process is;
Sn^2+(aq) + 2e ------> Sn(s)
Since 1e = 1F= 96500 C
but q =It
t is in hours so it must be converted to seconds, the SI unit of time
Hence;
119g of tin is deposited by 2 * 96500 C
xg of tin is deposited by 5.29 * 1.30 * 60 * 60
x = 119 * 5.29 * 1.30 * 60 * 60/ 2 * 96500
x = 2946106.8/193000
x= 15.26 g of tin
A current of 5.29 A is passed through a Sn(NO₃)₂ solution for 1.30 hour, the amount of tin plated is 15.26 grams.
How do we calculate mass?Mass of any deposited susbatnce that is obtained by the passing of current will be calculated by using the Faraday's Law as:
W = ECT/F, where
W = required mass of deposited tin
C = current = 5.29 A
T = time period = 1.30hr = 4,680sec
F = faradays constant = 96500C
E = equivalent mass
Equivalent mass will be calculated as:
E = molar mass/charge on atom = 119/2 = 59.5 g/equ
On putting all these values in the above equation, we get
W = (59.5)(5.29)(4680) / 96500
W = 15.26 g
Hence mass of tin is 15.26 g.
To know more about Faraday's Law, visit the below link:
https://brainly.com/question/1640558
Can someone help me please
Fe + CuCl2 → FeCl2 + Cu
The type of reaction represented by the above equation is -
decomposition
synthesis
single-replacement
double-replacement
Answer:
the type is single replacement
The given reaction equation represents a single-replacement reaction.
Explanation:
A chemical reaction is defined as the rearrangement of the atoms of a substance to give a new substance as a product.A decomposition reaction is a type of chemical reaction in which a substance breakdowns into two or more than two simpler substances.ABC→ A+B+C
A synthesis reaction is a chemical reaction in which two or more compounds are combined together to form a single compound.A+B+C → ABC
A single-replacement reaction is defined as the chemical reaction in which an element replaces another element from its compound.AB+ C → AC + B
A double-replacement reaction is defined as the chemical reaction in which ions of compounds are exchanged.AB+ CD → AC + BD
Given:
[tex]Fe + CuCl_2 \rightarrow FeCl_2 + Cu[/tex]
To find:
The type of chemical reaction represented by the given equation.
Solution:
In the given reaction:
[tex]Fe + CuCl_2 \rightarrow FeCl_2 + Cu[/tex]
Iron is replacing copper from its compound which is copper(II) chloride to give iron(II) chloride and copper as a product.
So from this, we can conclude that the given reaction equation represents a single-replacement reaction.
Learn more about types of chemical reactions here:
brainly.com/question/1071297?referrer=searchResults
brainly.com/question/12844777?referrer=searchResults
A 0.98 gram sample of a volatile liquid was heated to 348 k. the gas occupied 265 ml of space at a pressure of 0.95 atm. what is the molecular weight of this gas?
Answer:
The molecular weight is [tex]Z = 111.2 \ g/mol[/tex]
Explanation:
From the question we are told that
The mass of the sample is [tex]m = 0.98 \ g[/tex]
The temperature is [tex]T = 348 K[/tex]
The volume which the gas occupied is [tex]V = 265 \ ml = 265 *10^{-3} L[/tex]
The pressure is [tex]P = 0.95 \ atm[/tex]
Generally from the ideal gas equation we have that
[tex]PV = n RT[/tex]
Here n is the number of moles of the gas while the R is the gas constant with value [tex]R = 0.0821 \ atm \cdot L \cdot mol^{-1} \cdot K^{-1}[/tex]
[tex]n = \frac{PV}{ RT}[/tex]
=> [tex]n = \frac{ 0.95 * 265 *10^{-3} }{ 0.0821 * 348}[/tex]
=> [tex]n = 0.00881 \ mol[/tex]
Generally the molecular weight is mathematically represented as
[tex]Z = \frac{m}{n}[/tex]
=> [tex]Z = \frac{0.98 }{0.00881}[/tex]
=> [tex]Z = 111.2 \ g/mol[/tex]
Shifts in the rock layer locations cannot account for gaps in the rock record
true or false
Answer: That would be false because it is the contact between two layers representing a gap in the geologic record, usually from the erosion of the layers which would normally be expected to appear.
Explanation:
Have a good day
I hope this helps if not sorry :(
Stay motivated
Which element has the same number of electrons in the outermost energy level at Lithium?
Answer:
Hydrogen, lithium, sodium, and potassium all have 1 valence electron ( an electron in the outermost energy level is a valence electron).