Answers
ANSWER
[tex]\frac{a}{2}[/tex]EXPLANATION
When a force is applied on an object of mass m, it produces an acceleration of a.
We can represent this relationship using Newton's second law of motion:
[tex]\begin{gathered} F=ma \\ \Rightarrow a=\frac{F}{m} \end{gathered}[/tex]Now, the same force is applied on an object with a mass of 2m.
Let the acceleration experienced by the object be a1. This implies that:
[tex]\begin{gathered} F=\left(2m\right)\left(a_1\right) \\ \Rightarrow a_1=\frac{F}{2m} \end{gathered}[/tex]We can write this new acceleration in terms of a as follows:
[tex]\begin{gathered} a_1=\frac{1}{2}\left(a\right) \\ a_1=\frac{a}{2} \end{gathered}[/tex]That would be the acceleration of the second object.
The answer is the third option.
Related Questions
A string with both ends fixed is vibrating in its second harmonic. The waves have a speed of 36m/s and a frequency of 60Hz. The amplitude of the standing wave at an antinode is 0.6cm. calculate the amplitude of the motion of points on the string a distance of 30cm,15cmand 7.5cm on the left hand end of the string.
Answers
The amplitude of the motion of points on the string a distance of 30cm,15cmand 7.5cm is 0.0547m, 0.027m and 0.0137m respectively.
Amplitude is the maximum range of vibration or oscillation, measured from the equilibrium position
According to the equation of the second harmonic motion
A = sin (kx)
A = Amplitude
k = [tex]\frac{2\pi f}{v}[/tex] = [tex]\frac{2*\pi * 60}{36}[/tex] = 10.467
x = distance of the point
For x = 30 cm = 0.3 m
A = sin (kx)
A = Sin (10.467 * 0.3)
A = 0.0547 m
For x = 15 cm = 0.15 m
A = sin (kx)
A = Sin (10.467 * 0.15)
A = 0.027 m
For x = 7.5 cm = 0.075 m
A = sin (kx)
A = Sin (10.467 * 0.075)
A = 0.0137 m
To know more about amplitude,
https://brainly.com/question/15518312
#SPJ1
What is troubling about the circumstance when a coil is stationary and a magnet moves as compres to when a magnet is stationary and the coil moves?
Answers
When the magnet is moved, the galvanometer needle will deflect. It shows that the current is flowing in the coil. When the magnet moves into the coil, the needle deflects into one way, and if the magnet moves out of the coil, the needle deflects into the other way.
When the magnet is held stationary near, or even inside, the coil, no current will flow through the coil.
The role or purpose of the battery in a circuit is to ____. Choose three.Group of answer choicesa) supply electric charge so that a current can existb) supply energy to the chargec) move the charge from the - to the + terminal of the batteryd) transform energy from electrical energy into light energye) establish an electric potential difference between the + and - terminalsf) replenish the charge which is lost in the light bulbg) offer resistance to the flow of charge so that the light bulb can get hot
Answers
Given:
The battery is connected to a circuit.
To find:
The purpose of the battery in the circuit
Explanation:
A battery is a source of energy in a circuit. The battery provides a push or a voltage to get the current flowing in a circuit.
Hence, the purposes are
b) supply energy to the charge
e) establish an electric potential difference between the + and - terminals
f) replenish the charge which is lost in the light bulb
ine? Bir10. Two people are pulling on opposite ends of a rope so that ithas a tension of 150 newtons. If the rope is not moving, withwhat pulling force is each of the two people pulling?
Answers
ANSWER
150 N
EXPLANATION
The rope is not moving, so the net force on it is 0. The force that each person exerts on the rope is equal and opposite to the tension on the rope, so the sum of the forces acting on it is zero.
Hence, the force that each of the two people is exerting on the rope while pulling is 150 Newtons.
Below is a diagram of a 5.0 kg block being dragged to the right, along a horizontal surface. The
coefficient of dynamic friction, is 0.40. Take acceleration due to gravity, g, as 9.81 ms ².
5 kg
30. N
What is the acceleration of the block? Give your answer correct to two significant figures, in
m-s-2, without units.
Answers
The acceleration of the block when the coefficient of friction is 0.40 is 3.924 m/s².
The ratio of the frictional resistive force to the perpendicular force pushing the objects together is known as the coefficient of friction.
Acceleration is the rate at which an object's velocity with respect to time changes.
The block of mass 5 kg is dragged to the right on a horizontal surface.
The coefficient of friction is 0.40.
The acceleration due to gravity is 9.81 m/s².
The force on the block is 30 N.
Now, the force is defined as the product of the mass and acceleration of the object.
Now, using the conservation of force:
F = μmg
ma = μmg
a = μg
a = 0.40 × 9.81
a = 3.924 m/s²
Learn more about coefficient of friction here:
brainly.com/question/23971360
#SPJ1
8. What would the shape of the graph be if the speed of the object decreased from 50.0 km/hr at 20 s to 30 km/hr at 40 s?9. What is the acceleration in Problem 8?
Answers
We will have the following:
8. The graph will be the following:
9. The acceleration of part 8 will be determined as follows:
First, we determine the equivalency of the velocities, that is
[tex]\begin{gathered} \frac{50km}{h}\ast\frac{1000m}{1km}\ast\frac{1h}{3600s}=\frac{125}{9}m/s \\ \\ \frac{30km}{h}\ast\frac{1000m}{1km}\ast\frac{1h}{3600s}=\frac{25}{3}m/s \end{gathered}[/tex]Then, the acceleration will be:
[tex]a=\frac{(25/3\text{ }m/s)-(125/9\text{ }m/s)}{40s-20s}\Rightarrow a=-\frac{5}{18}m/s^2[/tex]So, the acceleration was of -5/18 m/s^2.
Can you please tell me the definition and give a example/formula of the first law of thermodynamics
Answers
We will have the following:
The first law of Thermodynamics:
Energy cannot be created or destroyed, it can only be transformed.
An example is when a car suddenly breaks in order to avoid hitting a person, here the velocity of the car, all the energy that is acumulated is transformed into thermal energy and it disipated by the friction of the breaks and the tires. The total energy of the system will remain the same, but it will change the way the energy is present. This as per our understanding of the universe so far.
The inductor in the RLC tuning circuit of an AM radio has a value of 9 mH. What should be the value of the variable capacitor, in picofarads, in the circuit to tune the radio to 66 kHz
Answers
Given:
The inductance is,
[tex]\begin{gathered} L=9\text{ mH} \\ =9\times10^{-3}\text{ H} \end{gathered}[/tex]The radio frequency is,
[tex]\begin{gathered} f=66\text{ kHz} \\ =66\times10^3\text{ Hz} \end{gathered}[/tex]To find:
value of the variable capacitor, in picofarads
Explanation:
The frequency of the AM is,
[tex]\begin{gathered} f=\frac{1}{2\pi\sqrt{LC}} \\ \end{gathered}[/tex]Substituting the values we get,
[tex]\begin{gathered} 66\times10^3=\frac{1}{2\pi\sqrt{9\times10^{-3}\times C}} \\ \sqrt{9\times10^{-3}\times C}=\frac{1}{2\pi\times66\times10^3} \\ \sqrt{9\times10^{-3}\times C}=2.41\times10^{-6} \\ 9\times10^{-3}\times C=5.81\times10^{-12} \\ C=6.45\times10^{-10} \\ C=645\times10^{-12}\text{ F} \\ C=645\text{ pF} \end{gathered}[/tex]Hence, the capacitance is 645 pF.
An unbanked asphalt highway has turns of 40m radii. How fast should the speed limit be if cars may be traveling in the rain? (Us for wet asphalt on rubber is .755)
Answers
Given data:
* The radius of the turn is r = 40 m.
* The coefficient of friction is,
[tex]\mu_s=0.755[/tex]Solution:
The centripetal force acting on the car is,
[tex]F=\frac{mv^2}{r}[/tex]where m is the mass of the car,
The frictional force acting on the car is,
[tex]F_r=\mu_smg[/tex]where g is the acceleration due to gravity,
In order to travel a car in rain, the centripetal force acting on the car must be equal to the frictional force on the same car.
Thus,
[tex]\begin{gathered} F_r=F_{} \\ \mu_smg=\frac{mv^2}{r} \\ \mu_sg=\frac{v^2}{r} \\ v^2=r\mu_sg \end{gathered}[/tex]Substituting the known values,
[tex]\begin{gathered} v^2=0.755\times40\times10 \\ v^2=302 \\ v=17.4\text{ m/s} \end{gathered}[/tex]Thus, the maximum speed limit of the car in rain is 17.4 m/s.
Hence, the nearest possible correct answer is option b.
Four masses are arranged as shown. They are connected by rigid, massless rods of lengths 0.780 m and 0.500 m. What torque must be applied to cause an angular acceleration of 0.750 rad/s2 about the axis shown?
Answers
Given,
The length of the rods;
L=0.780 m
l=0.500 m
The angular acceleration, α=0.750 rad/s²
The masses;
m_A=4.00 kg
m_B=3.00 kg
m_C=5.00 kg
m_D=2.00 kg
The moment of inertia of the given system of masses is given by,
[tex]\begin{gathered} I=\Sigma mr^2 \\ =m_A(\frac{L}{2})^2+m_B(\frac{L}{2})^2+m_C(\frac{L}{2})^2+m_D(\frac{L}{2})^2 \\ =(\frac{L}{2})^2(m_A+m_B+m_C+m_D) \end{gathered}[/tex]Where r is the distance between each mass and the axis of rotation.
On substituting the known values,
[tex]\begin{gathered} I=(\frac{0.780}{2})^2(4.00+3.00+5.00+2.00) \\ =2.13\text{ kg}\cdot\text{m}^2 \end{gathered}[/tex]The torque required is given by,
[tex]\tau=I\alpha[/tex]On substituting the known values,
[tex]\begin{gathered} \tau=2.13\times0.750 \\ =1.6\text{ Nm} \end{gathered}[/tex]Thus the torque that must be applied to cause the required acceleration is 1.6 Nm
g) 0.35 oz to mgh) 75 mL to gali) 54 mi to kmj) 1789 ft to km
Answers
In order to covnert the given quantities, use the correct covnersion factor, as follow:
g) 0.35 oz to mg
[tex]0.35oz\cdot\frac{28.3495g}{1oz}\cdot\frac{1000mg}{1g}=9922.325mg[/tex]h) 75 mL to gal
[tex]75mL\cdot\frac{1L}{1000mL}\cdot\frac{0.2641722gal}{1L}\approx0.02gal[/tex]i) 54 mi to km
[tex]54mi\cdot\frac{1.61\operatorname{km}}{1mi}=86.94\operatorname{km}[/tex]j) 1789 ft to km
[tex]1789ft\cdot\frac{0.3048m}{1ft}\cdot\frac{1\operatorname{km}}{1000m}\approx0.54\operatorname{km}[/tex]A/An _____ is described as a device that is used to measure potential difference across any part of a circuit.ammeterfuseground fault interruptervoltmeter
Answers
Answer:
[tex]\text{Voltmeter}[/tex]Explanation: We need to find an instrument that measures potential difference across any part of the circuit, a potential difference is basically voltage difference across a circuit difference and the device used to measure this difference is known as:
[tex]\text{ Voltmeter}[/tex]Voltmeter used in a circuit
When an object falls through air, there is a drag force that depends on the product
of the surface area of the object, and the square of its velocity, i.e. F=CAv2
, where C
is a constant, determine the dimension of C and its SI unit
Answers
The dimensions and unit of C from the expression above is [ML^-3] and kgm^-3
What is dimension and units ?
Despite the fact that the solution to any engineering problem must incorporate units, dimensions and units are frequently misunderstood. While units are arbitrary names that are correlated to certain dimensions to make it relative, dimensions are tangible quantities that can be measured (e.g., a dimension is length, whereas a metre is a relative unit that describes length). Through a conversion factor, all units for the same dimension are related to one another.
given in question drag force depends upon the product of the cross sectional area of the object and the square of its velocity
and drag force can be given by
F = CAv^2 ----------- (1)
It is given that
Dimension of mass = [M]
Dimension of length = [L]
Dimension of time = [T]
So, by using above dimension we can write
the dimension of force,
F = [ MLT^-2]
dimension of cross-section area,
A = [L^2]
and dimension of velocity
v = [LT^-1]
now, by putting these values in equation (1), we will get
F = CAv^2
[ MLT^-2] = C[L^2][LT^-1]^2
C = [ML^-3T^0]
C = [ML^-3]
The dimensions and unit of C from the expression above is [ML^-3] and kgm^-3
Learn more on Units and Dimension from the given link
brainly.com/question/28464
#SPJ9
Hence, the dimension of constant C will be,
One mole of an ideal gas at 1.00 atm and 0.00°C occupies 22.4 L. How many molecules of an ideal gas are in one cm^3 under these conditions?a. 28.9 b. 22 400 c. 2.69 × 1019 d. 6.02 × 1023
Answers
Given:
Atm = 1.00 atm
Temperature = 0.00°C
Amount of gas = 1 mole which occupues 22.4 L
Let;s find the number of molecules of an ideal gas are in one cm^3 under these conditions.
We have:
1 mole of ideal gas = 22.4 L
This is called the molar volume of gas.
To find the amount of molecules, apply the avogrado's constant:
Number of molecules in 1 mol = 6.023 x 10²³
Hence, for 1 cm³, we have:
[tex]\text{ No. of molecules in 1 cm}^3=\frac{6.023\times10^{23}}{22.4\times10^3}[/tex]Solving further:
[tex]\text{ No. of molecules in 1 cm}^3=\frac{6.023\times10^{23}}{22.4\times10^3}=2.69\times10^{19}mol/cm^3[/tex]Therefore, the amount of molecules of an ideal gas in one cm^3 under these conditions is:
2.69 x 10¹⁹ mol/cm^3
ANSWER:
C. 2.69 x 10¹⁹
Calculate the height of an image in a converging lens with a height of 6.1 cm, an image location of 6.2 cm, and a distance of 3.6 cm for the object's placement from the lens. Final answer will have 2 decimal places and might not follow sig fig rules.
Answers
the formula we will use is
1/f = 1/p + 1/q
where f is = focal length
p is the distance away (distance from the lens to the object)
and q is the image distance
Jake did an experiment in his science class. He found two of the same kind of beaker, and he filled them with different liquids. Then, he measured the volume and mass of each. The image below shows the two beakers.Based on the image, which of the following is the best conclusion? A. The liquids have the same volume and different masses. B. The liquids have different volumes and the same mass. C. The liquids have different volumes and different masses. D. The liquids have the same volume and the same mass.
Answers
Yellow liquid:
Mass = 470 g
Volume = 450ml
Pink liquid
Mass= 570 g
Volume= 450ml
Volumes are equal (450ml) and masses are different (470g and 570g)
A. The liquids have the same volume and different masses.
A mass on a spring vibrates in simple harmonic motion at a frequency of 4.0 Hz and an amplitude of 4.0cm. If a timer is started when it's displacement is a maximum (hence x=4cm when t=0), what is the speed of the mass when t=3s ?
Answers
Since the frequency is 4 Hz, it completes one cycle in 1/4 seconds (its period, T, is 1/4 sec).
f = 1/T
Let's draw a graph of the displacement of the mass along time.
This pattern repeats, with each crest (high point) at every 1/4 second. This means that at t = 3, which is a multiple of 1/4, the mass is at its high point.
Notice that when the spring reaches its high or low point, it changes direction.
At this instant when it changes direction, its speed momentarily becomes 0.
That means that each multiple of 1/8 seconds, the speed is momentarily 0.
The speed of the mass is 0 at t = 3.
Shown here are astronomical objects located at different distances from earth. rank the objects based on their distances from earth, from farthest to nearest.
- star on far side of Andromeda Galaxy
- star on near side of Andromeda Galaxy
- star on far side of Milky Way Galaxy
- star near center of Milky Way Galaxy
- Orion Nebula
- Alpha Centauri
- Pluto- The Sun
Answers
The distance of astronomical objects is measure very carefully. These are having a different unit. This is the astronomical unit. The distances are very huge.
The distance between objects in space is vast and very difficult to calculate. These are learned under solar system mathematics. The values for these distances are cumbersome for astronomers and scientists to manipulate. Therefore, scientists use a unit of measurement called an astronomical unit.
Let us understand the distances first.
To know the distance of stars in Andromeda Galaxy, we should first know the distance of Andromeda Galaxy. The distance of Andromeda Galaxy from Earth is 2.5 million light years away. The astronomical unit used is the light years.
Thus, from this we can conclude that,
The star near to Andromeda Galaxy must be at a distance of 2.5 million light years away.The star far side from Andromeda Galaxy will be more than 2.5 million light years away.Now to know about the stars in Milky Way Galaxy, the distance of milky way galaxy from Earth is approximately 9 light years away.
So,
The star far from Milky Way Galaxy should be more than 9 light years away from Earth.The star near to the Milky Way Galaxy should be close to 9 light years away from Earth.Orion Nebula is 1,344 light years away.Alpha Centauri is approximately 4.3 light years away from the Earth.The Pluto is approximately 5 billion km away from the Earth.The Sun is approximately 148 million km away from the Earth.Thus, from this we can conclude that,
The farthest is the star on far side of Andromeda Galaxy, then the star on near side of Andromeda Galaxy, then comes the star on far side of Milky Way Galaxy, then the star near center of Milky Way Galaxy, then it is the Alpha Centauri, then the Orion Nebula and then it is the Pluto with the Sun being the nearest one.
To know more about astronomical distance, refer: https://brainly.com/question/28601809
#SPJ4
Example of a balanced force
Answers
Isaac Newton’s First Law of Motion states that an object at motion stays in motion, and an object at rest stays at rest until acted on by an unbalanced force. A book sitting still is an example of a balanced force because nothing is acting on it; its potential energy is stored while it’s at rest. For this book to become an unbalanced force, an outside force would have to occur (i.e pushing the book or dropping it) that causes it to not be in a state of stillness.
A parallel plate capacitor is charged by connecting it to a battery. After reaching steady state, the electric energy stored in the capacitor is UE . Select the correct claim about the amount of work needed to charge the capacitor.1) The amount of work needed to charge the capacitor is UE, because the work done is equal to the final potential energy of the system.2) No work is needed to charge the capacitor, because the charges will naturally move to their equilibrium position.3) The amount of work needed to charge the capacitor is 2UE , because it takes UE of work to remove the charges from the battery and and additional UE to place the charges on the capacitor.4) The amount of work needed to charge the capacitor is UE , because integrating the equation W=∫q dV yields the equation for the energy stored on a capacitor, Ue= 1/2qV
Answers
4. IS correct, that is the for mula used to calculate the potential energy stored
1. Is more or lees correct, but is less explained than the 4
2. Is false, is needed some energy
3. Is missunderstand, cause you are transfering energy from the battery to the capacitor, you dont have to count it twice
Using an electric current, you can split liquid water to form two new substances, hydrogen and oxygen gases. Is this a change in state. Explain your answer.
Answers
This process (called electrolysis) is not have a change of state. This comes from the fact that the substance (in this case water) does not keep its identity during the change, this means that we don't end up with the same substance; rather we have two new ones, hydrogen and oxygen.
A mass of 0.520 kilograms is attached to a spring and lowered into a resting position, causing the spring to stretch 18.7 centimeters. The mass is then lifted up and released. a. What is the spring constant of the spring? Include units in your answer.b. What is the frequency of its oscillation? Include units in your answer.Answer must be in 3 significant digits.
Answers
Given data
*The given mass is m = 0.520 kg
*The spring stretches at a distance is x = 18.7 cm = 0.187 m
*The value of the acceleration due to gravity is g = 9.8 m/s^2
(a)
The formula for the spring constant of the spring is given as
[tex]\begin{gathered} F=kx \\ mg=kx \\ k=\frac{mg}{x} \end{gathered}[/tex]Substitute the known values in the above expression as
[tex]\begin{gathered} k=\frac{(0.520)(9.8)}{(0.187)} \\ =27.2\text{ N/m} \end{gathered}[/tex]Hence, the spring constant of the spring is k = 27.2 N/m
(b)
The formula for the frequency of its
A card is drawn at random from a standard deck. Determine whether the events are mutually exclusive or not mutually exclusive. Then find each probability (2 or black card).
Answers
Consider that the event are no mutually exclusive because you can obtain a black card and 2 in one card.
In a standard deck you have 52 cards. There are 26 black cards and 4 cards with number 2.
Consider that in the 26 black cards there are two black cards with number 2.
Then, to get the probability consider that the required result can be obtained for 26 + 2 = 28 cards (26 black cards and two cards with number 2).
The probability is the quotient between the number of options over the number of cards:
[tex]p=\frac{28}{52}=0.54[/tex]Hence, the probability is 0.54
A 4-kg ball traveling westward at 25 m/s hits a 15-kg ball at rest. The 4-kg ball bounces east at 8.0 m/s. What is the speed and direction of the 15-kg ball? What is the impulse of the second ball?
Answers
Given:
The mass of the first ball is,
[tex]m_1=4\text{ kg}[/tex]The initial velocity of the first ball towards West is,
[tex]u_1=25\text{ m/s}[/tex]The mass of thr second ball is,
[tex]m_2=15\text{ kg}[/tex]the second object is initially at rest.
The final velocity of the first ball is,
[tex]v_1=-8.0\text{ m/s}[/tex]we are taking West as positive.
Applying momentum conservation principle we can write,
[tex]m_1u_1+m_2\times0=m_1v_1+m_2v_2[/tex]Substituting the values we get,
[tex]\begin{gathered} 4\times25+0=4\times(-8.0)+15\times v_2 \\ v_2=\frac{100+32}{15} \\ v_2=8.8\text{ m/s} \end{gathered}[/tex]THe final velocity of the second ball is towards East and the magnitude is 8.8 m/s.
The impulse of the Second ball is,
[tex]\begin{gathered} I=m_2v_2-m_2\times0 \\ =15\times8.8 \\ =132\text{ kg.m/s} \end{gathered}[/tex]The safe loadof a wooden beam supported at both ends varies jointly as the width, w, the square of the depthd, and inversely as the length A wooden beam 7 inwide, 10 indeepand 19 ft long holds up 4422 What load would a beam inwide. 5 indeep and long of the same material support? (Round off your answer to the nearest pound )
Answers
L = k(wd^2/ l)
L = load
L1= 4422 lb
w = width
w1= 7 in
d = depth
d1= 10 in
l = lenght
l1= 19 ft
L2=
w2= 5in
d2=5in
l2= 11ft
First solve the constant with values 1
L1= k [(w1) (d1)^2 / l1]
4422= k [(7) (10)^2 / 19]
k = 4422 / [(7) (10)^2 / 19]
k= 120 lb/ft in^3
Replace with values 2
L2= k [(w2) (d2)^2 / l2]
L2= 120 [(5) (5)^2 / 11]
L2= 1363.63 LB
When you eat cereal and thenlift weights, how is the energytransformed?A. The chemical energy in the cereal istransformed into mechanical energy.B. The thermal energy in the cereal istransformed into mechanical energy.C. The mechanical energy in the cereal istransformed into chemical energy.
Answers
in any food not just in cereal there are chemical energy is stored in the form of
carbon, protein, fats, etc.
when we eat the food our body transforms this energy into
energy by decomposing the food into its elementary
particles and store it in the form of chemical energy and when we need energy
to do work it (body) coverts the energy into the mechanical energy by various
process.
so the correct answer is option (A)
5. Draw a transverse wave with two wavelengths and label amplitude, crest, trough, and
equilibrium position.
Answers
A wave is considered to be transverse if its oscillations run counterclockwise to the wave's direction of advance. A longitudinal wave, on the other hand, moves in the direction of its oscillations. Transverse waves include water waves.
A waveform signal's wavelength, which is the distance between two identical locations (adjacent crests) in the succeeding cycles, determines whether it is sent through space or via a wire. This length is typically defined in wireless systems in metres (m), centimetres (cm), or millimetres (mm).
The largest displacement or distance made by a point on a wave or vibrating body relative to its equilibrium position is its amplitude. It is equal to one-half of the vibration path.
The crest and trough of a wave, respectively, are its highest and lowest surface portions. The wave height is the vertical distance between the peak and trough. The wavelength is the horizontal separation between two consecutive crests or troughs.
The horizontal line at the wave's centre stands in for balance. A period is the length of time it takes to complete a cycle, which includes travelling from one peak to another, from one trough to another, or from one equilibrium point to another (both equilibrium points same direction).
To know more about transverse wave, click on the link below:
https://brainly.com/question/12584334
#SPJ9
What is the difference in the path of a ball tossed straight up in the air by a passenger on a a bus from the view point of the passenger, and the person on the street?
Answers
The difference in the path of a ball tossed straight up in the air by a passenger on a a bus from the view point of the passenger, and the person on the street is that the ball would appear to the passenger to be making an up and down movement when the ball is thrown up, while the stationary observer will actually see the ball moving along a parabolic path.
What is a parabolic path?A parabolic path is described as a Kepler orbit with the eccentricity equal to 1 and is an unbound orbit that is exactly on the border between elliptical and hyperbolic.
The Parabolic path is also defined as the angle of trajectory of a projectile.
Learn more about parabolic path at: https://brainly.com/question/16791942
#SPJ1
A man takes in 0.95 × 107 J of energy each day from consuming food, and maintains a constant weight. what power in watt supplied by the food?
Answers
Given data
*The given energy is E = 0.95 × 10^7 J
*The given time is t = 1 day = (24 × 60 × 60) s = 86400 s
The formula for the power in watt supplied by the food is given as
[tex]P=\frac{E}{t}[/tex]Substitute the known values in the above expression as
[tex]\begin{gathered} P=\frac{(0.95\times10^7)}{(86400)} \\ =1.09\times10^2\text{ W} \end{gathered}[/tex]Hence, the power in watt supplied by the food is P = 1.09 × 10^2 W
If Hubble's constant had a value of 95 km/s/Mpc, what would be the age of the Universe?
Answers
The age of universe will be 0.0103 million years.
Hubble's law states that the rate at which any galaxy is receding from another galaxy is proportional to its distance from the galaxy. In simple form,
v = H₀ × d
where v is the velocity of the galaxy, d is its distance, and H₀ is the Hubble's constant.
Given: Hubble's constant, H₀ = 95 km/s/Mpc.
The term 1 / H₀ is called the Hubble's time and gives the age of the universe. That is, if 't' is the age of the universe, then
t = 1 / H₀.
Substitute the given value.
⇒ t = 1 / (95 km/s/Mpc)
(1 pc = 3.086 ×[tex]10^{13}[/tex] km)
⇒ t = 1 / (95/3.086 ×[tex]10^{13}[/tex] ) s
⇒ t = (1 / 30.784) ×[tex]10^{13}[/tex] s
⇒ t = 0.0325 ×[tex]10^{13}[/tex] s
(1 year = 3.154 ×[tex]10^{7}[/tex] s)
⇒ t = 10305.68 years
⇒ t = 0.0103 million years
Therefore, the age of universe will be 0.0103 million years.
Learn more about Hubble's law here, https://brainly.com/question/13705068.
#SPJ1