When monosaccharides are bonded together c) all of these are correct.
Monosaccharides can be described as sugars from which all other complex forms of sugars are formed. Monosaccharides are the simplest form of sugars the combination of which leads to the formation of disaccharides, polysaccharides and oligosaccharides.
When the monosaccharides join in order to form complex sugar molecules, a single molecule of water is lost by each new link or joining of molecules that occur.
As monosaccharides are simplest of sugars, they are more easily absorbed as compared to other types of sugars.
To learn more about monosaccharides, click here:
https://brainly.com/question/1768793
#SPJ4
how many moles are in a 60gram sample of NaCI
Answer:
[tex]1.03\text{ moles}[/tex]Explantion
Here, we want to get the number of moles in 60 g sample of NaCl
Mathematically, to get this, we have to divide the mass given by the molar mass of NaCl
Thenmolar mass of NaCl is 58.44 g/mol
Thus, we have the number of moles as:
[tex]\frac{60}{58.44}\text{ = 1.03 mole}[/tex]which statement correctly compares the weight and the mass of an object?
The statement that correctly compares the weight and the mass of an object is as follows: its weight changes based on location but the mass stays the same (option C).
What is weight and mass?Weight is the force on an object due to the gravitational attraction between it and the Earth. Weight is a function of an object's mass and it's gravitational force.
Mass, on the other hand, is the quantity of matter which a body contains, irrespective of its bulk or volume. It is one of four fundamental properties of matter and is measured in kilograms in the SI system of measurement.
An object's mass does not change, however, its weight is subjective to changes in location. This means that a ball on Earth will weigh differently from a ball in mars.
Learn more about weight at: https://brainly.com/question/13040516
#SPJ1
Calculate the mass in grams of 2.73×1024 molecules of methanol. The chemical formula for methanol is CH4O.
The mass in grams of 2.73×1024 molecules of methanol is 154.20g.
given that:
no. of molecules = 2.73 × 10²⁴
molar mass of methanol (CH₄O) = 34.04 g/mol
moles of methanol = no. of molecules / Na
= 2.73 × 10²⁴ / 6.022× 10²³
= 4.53 mol
now, formula for the no. of mole is given as :
no. of moles = mass / molar mass
mass = no. of mole × molar mass
mass = 4.53 ×34.04
mass = 154.20 g
Thus, the mass in grams of 2.73 × 10²⁴ molecules of methanol is 154.20 g
To learn more about no. of moles here
https://brainly.com/question/26416088
#SPJ1
(a)one of the alkali metal reacts with oxygen forms solid white substance. when this substance is dissolved in water, the solution gives a positive test for hydrogen peroxide, h2o2. when the solution is tested in a burner flame, a lilac-purple flame is produced. what is the likely identity of the metal? (b) write a balanced chemical equation for the reaction of the white substance with water.
Answer: An ionic bond.
Explanation:An ionic bond is the force of attraction that holds together positive and negative ions. It forms when atoms of a metallic element give up electrons to atoms of a nonmetallic element. Ionic bonds form only between metals and nonmetals
1. Using PbS + 3PbO -> 3Pb + SO2a. How many moles of Pb will form from 17 moles of PbO (excess PbS)?b. How many moles of PbO are needed to make 27.4 moles of SO2 (excess PbS)c. Give 17.6 moles of PbS and 36 moles of PbO, which is the limiting reactant (show mathematical proof). It’s
Answer:
a. 25.5 moles of Pb will be formed.
b. 54.8 moles of PbO are needed.
c. PbS is the limiting reactant.
Explanation:
1st) It is necessary to write the balanced chemical reaction:
[tex]PbS+2PbO\rightarrow3Pb+SO_2[/tex]From the balanced chemical reaction we know that 1 mole of PbS reacts with 2 moles of PbO to produce three moles of Pb and 1 mole of SO2.
2nd) Using the stoichiometry of the reaction and a mathematical rule of three, we can calculate the moles of Pb that will be produced from 17 moles of PbO and excess of PbS:
[tex]\begin{gathered} 2molesPbO-3molesPb \\ 17molesPbO-x=\frac{17molesPbO*3molesPb}{2molesPbO} \\ x=25.5molesPb \end{gathered}[/tex]So, 25.5 moles of Pb will be formed.
3rd) Using the stoichiometry of the reaction and a mathematical rule of three, we can calculate the moles of PbO that are needed to make 27.4 moles of SO2 in excess of PbS:
[tex]\begin{gathered} 1molSO_2-2molPbO \\ 27.4molSO_2-x=\frac{27.4molSO_2*2molPbO}{1molSO_2} \\ x=54.8molPbO \end{gathered}[/tex]So, 54.8 moles of PbO are needed.
4th) Using the stoichiometry of the reaction we can calculate the limiting reactant:
- Calculation from 17.6 moles of PbS:
[tex]\begin{gathered} 1molPbS-2molPbO \\ 17.6molPbS-x=\frac{17.6molPbS*2molPbO}{1molPbS} \\ x=35.2molPbO \end{gathered}[/tex]From the stoichiometry of the reaction 1 mol of PbS reacts with 2 moles of PbO, so the 17.6 moles of PbS will need 35.2 moles of PbO to react properly, but we have 36g of PbO, so PbO will be the excess reactant and PbS the limiting reactant.
- Calculation from 36 moles of PbO:
We can do this calculation to confirm the previous one:
[tex]\begin{gathered} 2molPbO-1molPbS \\ 36molPbO-x=\frac{36molPbO*1molPbS}{2molPbO} \\ x=18molPbS \end{gathered}[/tex]In this case, we can see that 36 moles of PbO will need 18 moles of PbS to react properly, but we only have 17.6 moles of PbS. Here we confirm that PbS is the limiting reactant.
To find the order of a reaction with respect to one reactant, you will monitor the __________ as the _________of ________ is changed.
To find the order of a reaction with respect to one reactant, you will monitor the Percentage as the reactant of product is changed.
To determine the reaction order from experimental data, either the differential rate law or the integrated rate law can be used. In the rate law, the exponents are frequently positive integers: 1 and 2 or even 0. As a result, the reactions in each reactant are of zeroth, first, or second order. Changes in the concentration of the reactants or products can be used to calculate the rate. changes in reactant or product mass or volume If the reaction is the result of multiple reaction steps with different orders, the order of the reaction can be changed by adjusting the reagent concentration. Because the order is often ruled by the slowest reaction, you can manipulate the relative reaction speed by varying the concentrations.
Learn more about reaction here-
https://brainly.com/question/17434463
#SPJ4
Answer:
Explanation:
You will watch the Percentage when the reactant of the product is changed in order to determine the sequence of a reaction with respect to one reactant.
Either the differential rate law or the integrated rate law can be used to infer the reaction order from experimental data.
The exponents of the rate law are frequently positive numbers, such as 1 and 2 or even 0.
Because of this, each reactant undergoes reactions of the zeroth, first, or second order.
The rate can be calculated using changes in the concentration of the reactants or products.
A change in the reactant, product, or reactant's volume by changing the reagent concentration, the reaction order can be modified if it involves several steps that have been performed in a different sequence.
You can also control the relative reaction speed by changing the concentrations because the order is frequently determined by the slowest reaction.
To learn more about reactions visit:
https://brainly.com/question/17434463
#SPJ4
A temperature change of 51 deg * C would be equivalent to a temperature change of
i don't know if you mean C° to F° but in F° the change would be 123.8°
aqueous ammonia is commercially available at a concentration of 16.0 m. how much of the concentrated solution would you use to prepare 500.0 ml of a 1.90 m solution?
Volume of 16.0 m aqueous ammonia solution required to prepare 500.0 ml of a 1.90 m solution is 50ml
What is molarity?Molarity is used to describe the concentration of a solution. Molarity, also called molarity, is the number of moles of solute (dissolved substance) per liter of solution. The unit of molarity is moles per cubic decimeter, written as mol dm⁻³ or simply M. A cubic decimeter is the same as a liter. In many old textbooks you can find concentrations in moles/liter written as mol l⁻¹
Original concentration x initial volume = final concentration x final volume.
We will use the equation (M₁)(V₁) = (M₂)(V₂)
Given,
M₁ = 16.0 m
M₂ = 1.90 m
V₂ = 500.0 ml or 0.5L
So, 16 × V₁ = 1.90 × 0.5
16 V₁ = 0.9 m
V₁ = [tex]\frac{0.9}{16}[/tex]
V₁ = 0.05L or 50ml
To know more about molarity visit:
https://brainly.com/question/19517011
#SPJ4
What is the kinetic energy of a ball with a mass of 0.5 kg and a velocity of 10 m/s? (Formula:)
Answer: so the answer will be 25 J
Explanation: The mass is 0.5 kg and the velocity is 10 meters per second. So: KE = (1/2)(0.5)(10)^2. Thus the kinetic energy of the ball is 25 J
Which of the following Periodic Table trends (characteristics) is incorrect?
a) electron affinity decreases from top to bottom on the periodic table
b) electronegativity decreases left to right across the periodic table
c) atomic radii decreases left to right across the periodic table
d) ionization energy decreases from top to bottom on the periodic table
(b) electronegativity decreases left to right across the periodic table
Electronegativity increases from left to right in a period across the periodic table.
Electronegativity is a relative property that defines the tendency to attract shared pair of electrons. It is a unitless parameter that is calculated by different formulae.
Pauling scale is widely used to calculate the electronegativity values of a covalent bond. e.g. F = 4.0, Cl = 3.0, etc.
⇒Electron affinity decreases from top to bottom in the periodic table.
⇒Atomic radii decrease from left to right in the periodic table.
⇒Ionization energy decreases from top to bottom in the periodic table.
a 0.450 m solution of kcl needs to be prepared through dilution. a 2.00 m stock solution will be added to a 0.250 l volumetric flask and then water will be added to the 0.250 l mark. determine the volume (in ml) of the 2.00 m stock solution of kcl needed to produce this solution.
Taking into account the definition of dilution, the volume of the 2.00 M stock solution of KCl needed to produce the solution is 56.25 mL.
DilutionWhen it is desired to prepare a less concentrated solution from a more concentrated one, it is called dilution. It is accomplished by simply adding more solvent to the solution at the same amount of solute.
The amount of solute does not change, but as more solvent is added, the concentration of the solute decreases, as the volume of the solution increases.
A dilution is mathematically expressed as:
Ci×Vi = Cf×Vf
where
Ci: initial concentrationVi: initial volumeCf: final concentrationVf: final volumeVolume of the stock solutionIn this case, you know:
Ci= 2 MVi= ?Cf= 0.450 MVf= 0.250 LReplacing in the definition of dilution:
2 M× Vi= 0.450 M× 0.250 L
Solving:
Vi= (0.450 M× 0.250 L)÷ 2 M
Vi= 0.05625 L= 56.25 mL (being 1 L= 1000 mL)
In summary, 56.25 mL of stock solution are needed.
Learn more about dilution:
brainly.com/question/28734745
#SPJ1
A 3.00 L sample of paint that has a density of 4.65 g/mL is found to contain 33.1 g lead (II) nitride. Determine (A) how many grams of lead ion are in the paint sample? (B) How many ions of lead are in the paint? (C) what is mass percentage of lead in the paint/ What is the ppm?
1) Grams of lead.
Convert grams of lead (II) nitride to moles of lead (II) nitride
[tex]molofPb_3N_2=33.1gPb_3N_2\cdot\frac{1molPb_3N_2}{649.61gPb_3N_2}=0.0509lofPb_3N_2[/tex]Convert moles of lead (II) nitride into moles of Pb
[tex]\text{molesofPb}=0.0509molPb_3N_2\cdot\frac{3\text{molPb}}{1molPb_3N_2}=0.1527\text{molPb}[/tex]Convert moles of Pb into grams of Pb
[tex]\text{gofPb}=0.1527\text{molPb}\cdot\frac{207.2\text{ g Pb}}{1\text{molPb}}=31.64\text{ g Pb}[/tex]There is 31.64 g of ions of lead in the sample of paint.
Use the concepts of energy and stability as they relate to
orbital filling to write the electron configuration for iron. (Look at image)
The orbital diagram shows us the number of electrons that can be found in the atom.
How do you fill up an orbital?We know that the orbital is a region in pace where there is a high probability of finding the electron. We also know that the filling of the electrons into the respective orbitals where they fall in can be done by the use of the Aufbau principle.
According to the Aufbau principle, it is clear that in the filling of the electrons into the orbitals, the orbitals that are lesser in energy are first filled. The orbitals that are lesser in energy are always found quite close to the nucleus.
This implies that the relative energies of the orbitals would tend to increase as we move away from the nucleus. In other words, the nucleus is the part of the atom that would be at the lowest energy. The orbital diagram of iron by the use of the Aufbau principle have been shown in the image attached to this answer.
Learn more about orbital diagram:https://brainly.com/question/28809808
#SPJ1
Which principle did you apply in Step 4 of the
investigation?
Answer:
Find root causes.
Explanation:
i hope the answer be right
a compound differs from a mixture in that a compound: a. contains only one element b. varies in chemical composition depending on the size of the sample c. has a definite composition d. can be classified as either heterogeneous or homogeneous
A compound differs from a mix in that a compound has a definite composition by the mass of the elements it contains. Option C.
A compound may be a substance formed by the chemical combination of two or more elements. a mix is a substance formed by physically mixing two or more substances. a mix is two or more substances that are not chemically combined, and a compound is 2 or more elements that are chemically combined.
This differs from compounds, which are composed of drugs in fixed proportions. Substances during a mixture do not chemically combine to form new substances as compounds do. A compound may be a substance formed by the combination of two other chemical elements. a mix is a substance formed from two or more substances that can be separated using physical methods.
Learn more about A compound here:- https://brainly.com/question/568323
#SPJ4
If 0. 75 g of a monoprotic weak acid required 22. 50 ml of 0. 510 m naoh to titrate it, what is the molar mass of the acid?.
The molar mass of the acid is 65 g/mol.
What is the molar mass of the acid?We know that the term neutralization is applied to the reaction between an ad and a base that produces salt and water only. In this case, we have been told that a monoprotic weak acid required 22. 50 ml of 0. 510 m sodium hydroxide to titrate it.
Let us recall that by the principle of the stoichiometry of the chemical reactions, the reaction between sodium hydroxide and a monoprotic acid has to be one is to one and we have to bear this in mind.
Thus;
Number of moles of sodium hydroxide = 22. 50/1000 L * 0. 510 M
= 0.0115 moles
This implies that 0.0115 moles of the acid was required also.
Since;
Number of moles = mass/molar mass
Molar mass = mass/Number of moles
Molar mass = 0. 75 g /0.0115 moles
= 65 g/mol
Learn more about neutralization:https://brainly.com/question/27891712
#SPJ1
what is the result of applying too much sample to the tlc plate? select one: the sample leeches out into the elution solvent reduced separation between the spots some of the sample moves down instead of up the spot does not leave the origin the sample moves past the solvent front
Applying too much sample to the TLC (thin layer chromatography) plate results in reduced separation between the spots.
When performing thin layer chromatography it is necessary to not apply too much of the sample onto the plate. Once the elution solvent starts climbing up the plate, all the components of the sample will be separated along the plate according to the intensity of their interactions with the plate and the solvent (quantified as the Rf value - retention factor).
In a sample that is too concentrated or too much of it has been applied, the separation will be negatively affected because the huge spots originating from the sample components will overlap, making Rf determination difficult, if not impossible.
You can learn more about thin layer chromatography here:
brainly.com/question/13483325
#SPJ4
what is acetaldehyde? group of answer choices a substance in liver that helps detoxify alcohol an enzyme used in alcohol metabolism a ketone body the final product of alcohol metabolism. a toxic compound created in alcohol metabolism
Acetaldehyde is a toxic compound created in alcohol metabolism.
what is alcohol metabolism?
Alcohol dehydrogenase, an enzyme found in the liver cells, is responsible for the majority of alcohol metabolism (ADH).
Alcohol metabolism is governed by a number of processes.
The two enzymes involved in the most common of these methods are alcohol dehydrogenase (ADH) and aldehyde dehydrogenase (ADH) (ALDH). These enzymes assist in breaking down the alcohol molecule so that the body can eliminate it. ADH first breaks down alcohol into acetaldehyde, an extremely dangerous molecule and known carcinogen. In a following phase, acetaldehyde is further transformed to acetate, a less active byproduct, for rapid removal. Acetate can then be easily converted into carbon dioxide and water.
The researchers reported that heavy drinking leads to elevated acetaldehyde levels, which leads to inhibited ALDH enzymes, and in turn causes these adverse effects. The alcohol does not properly metabolize.
To know more about alcohol metabolism visit the link:
https://brainly.com/question/1388761?referrer=searchResults
#SPJ4
a 100 ml solution contains 0.100 m formic acid (pka 3.75) and 0.100 m sodium formate. if 1.00 ml of 0.050 m hcl were added, what would be the ph of the solution?
Answer:
ngl ts ngl ts ts ngl...imma keep it a buck.96 ion got the answers kanye do.
Explanation:
9. which flask contains the sample with the greatest density? a flask a b flask b c flask c d flask d e flask e 10. which flask contains the smallest number of moles of gas?
9 = T = 40 degrees Celsius, P = 2 atm is the greatest density
10 = T = 50 degrees Celsius, P = 0.5 atm is the smallest number of moles of gas .
Exactly which flask has the highest density?The gas with the highest atomic mass will be contained in the flask with the highest density.
Which flask would hold the most moles of gas at any given time?At constant volume and pressure, the ratio of the gas's moles to the temperature is inverse. Since the temperature was dropped, the flask containing helium will thus contain the most moles of gas.
Which flask is under the greatest pressure?Pressure and temperature have a straight relationship, PV = nRT, according to the ideal gas law. The pressure will be maximum in the heated helium flask because of this. d.
To know more about highest density visit:-
https://brainly.com/question/3883825
#SPJ13
What element is this? In my family there are non-metals, metalloids, and metals. I am commonly used in the canning business and sometimes give soup a distinct taste. I've been known to "cry" if you've bend me too hard.
The element that has in its family non-metals, metalloids, and metals, which is commonly used in the canning business and sometimes give soups a distinct taste and that is also been known to "cry" if you bend it too hard is tin.
What is tin?
Tin is a chemical element found in the periodic table with atomic number 50 and which has the symbol Sn.
The characteristics of tin include:
Tin is a silver-colored metal.Tin is a soft metal such that it can be cut even when little force is appliedPure solid tin has a shiny lustrous appearance as is similar to most metals.Because of its high resistance to corrosion and soft nature, tin has been used for a wide variety of purposes which include:
it is used in the electroplating of steel cans used as food containers,it is used together with other metals in producing bearingsIt is used in soldering worksLearn more about tin at: https://brainly.com/question/2272323
#SPJ1
The _______ the number of theoretical plates, the _______ the separation of a mixture of two liquids.
The N=(tR/σ)2 the number of theoretical plates, the distillation the separation of a mixture of two liquids.
Is more theoretical plates better?The effectiveness of a column is frequently determined using the number of theoretical plates. The range of plate numbers is 100 to 106. The quality of the separation improves with the number of theoretical plates present in a column because more equilibrations between the stationary and mobile phases are possible.
Why are theoretical plates important?The effectiveness of a column's column is closely tied to theoretical plates in column chromatography. It can therefore help to increase resolution, which, when all other factors are held constant, is directly proportional to the square root of the number of theoretical plates.
To know more about Theoretical plates visit:
https://brainly.com/question/14801810
#SPJ4
The following diagram of a pendulum shows the path it takes as it swings back and forth.
As the pendulum moves from point 2 to point 3, what happens to its mechanical energy?
Pendulum shows the path it takes as it swings back and forth and it is because of kinetic energy is converted into potential energy only once
Pendulum is the point mass suspended by the weightless and inextensible string fixed rigidly to support pendulum is also used in scientific instrument and it form because of gravity and in that pendulum potential energy is transformed to the kinetic energy and come back again and weight of pendulum is released and then it get active and gravity pull it back and that's why kinetic energy is converted into potential energy only once
Know more about mechanical energy
https://brainly.com/question/14567080
#SPJ1
The _______ the number of theoretical plates, the _______ the separation of a mixture of two liquids.
The effectiveness of columns is the number of theoretical plates, the the Fractional distillation is separation of a mixture of two liquids.
Fractional distillation divides a mixture into a number of distinct parts known as fractions.
What is fraction distillation process?Fractional distillation divides a mixture into a number of distinct parts known as fractions. A tall fractionating column is installed above the mixture, with several condensers exiting at various heights. The bottom of the column is hot, while the top is cool.In oil refineries, fractional distillation is used to separate the complex mixture into fractions with similar boiling points and thus similar molecular weights and properties. An oil refinery produces various fractions such as gasoline, diesel fuel, kerosene, and jet fuel.fractional distillation : A process that involves heating, vaporization, condensing, and cooling. A lower boiling point liquid will vaporize before a higher boiling point liquid.To learn more about : fractional distillation
Ref : https://brainly.com/question/790490
#SPJ4
What is the density of an object with a mass of 17.6g and a volume of 6 mL
Answer: 3.6 ml
Hope this helps!
When a mycelium infiltrates an unexploited source of dead organic matter, what are most likely to appear within the food source soon thereafter?.
Fungal digestive enzymes are most likely to appear within the food source soon thereafter. Mycelium has a porous structure made up of tubular filaments known as hypha.
Every single mycelium fiber is made up of an array of slender cells that are separated by cross walls, known as septum, and are all enclosed within the same cell wall. Tiny holes in the septum allow nutrients, water, and other small molecules, as well as mycelium fiber, to move quickly from cell to cell. Mycorrhizae are symbiotic relationships that fungi and plants form. Fungi colonize the root system of a host plant, increasing water and nutrient absorption, while the plant provides carbohydrates formed by photosynthesis to the fungus.
Learn more about mycelium here-
https://brainly.com/question/28299182
#SPJ4
Answer:
Explanation:
Fungal haustoria are most likely to appear in the food source shortly after a mycelium invades an untapped source of dead organic matter.
What do fungal haustoria do?
A specialized fungal hypha that breaks through the wall of a plant cell and expands inside of it creates a haustorium.
The haustorium is encircled by an extrahaustorial membrane, a thickened version of the plant cell plasma membrane, rather than being situated inside the cytoplasm of the plant cell.
Are haustoria produced by fungi?
All significant divisions of fungi create haustoria.
There are various types of haustoria.
Generally, the fungus increases the surface area in contact with the host plasma membrane upon penetration and releases enzymes that disintegrate the cell walls, allowing for a greater potential transfer of organic carbon from the host to the fungus.
What kind of structure is a haustoria?
Haustoria are incredibly diverse plant parasite structures.
Haustoria are visible on exposed roots in root parasites.
At the location of contact between the parasite and the host, they manifest as swollen tissue.
In dodders, haustoria are structures that connect the host and parasite and have the appearance of pegs or suction cups.
To learn more about fungual haustoria visit:
https://brainly.com/question/15171673
#SPJ4
phosphorus pentachloride, pcl5, a white solid that has a pungent, unpleasant odor, is used as a catalyst for certain organic reactions. calculate the number of moles in 55.7 g of pcl5
We have to calculate the moles of PCl₅ in the given gram. divide the gram by molar mass. the number of moles is 0.267 moles
What is mole?
The mole is the amount of substance of a system which contains as many elementary entities as there are atoms in 0.012 kilogram of carbon 12.
To find out the number of moles using the following formula.
mole = mass/molarmass
The molar mass of the PCl₅ = molar mass of phasphorus+ 5x molar mass of chlorine.
The molar mass of the PCl₅= 208.24 g/mol
mole = 55.7g÷208.24g/mol =0.267 moles
To find more about Molar mass, refer the link below:
brainly.com/question/22503632
#SPJ2
Mole measure the number of elementary entities of a given substance that are present in a given sample. mass. The number of moles in 55.7 g of PCl₅ is 0.26 mole.
What is mole?The SI unit of amount of substance in chemistry is mole. The mole is used to measure the quantity or amount of substance. We know one mole of any element contains 6.022×10²³ atoms which is also called Avogadro number.
Mathematically,
mole =given mass ÷ molar mass
Molar mass of PCl₅= 208.24 g/mol
Given mass of PCl₅= 55.7 g
Substituting the given values we get
mole =55.7 g ÷208.24 g/mol
number of moles=0.26 mole
Therefore, the number of moles in 55.7 g of PCl₅ is 0.26 mole.
To know more about mole, here:
https://brainly.com/question/15209553
#SPJ1
a lab assistant has asked to dissolved 18.4 g of hcl is added in 662 ml of water. what is the ph of resulting solution. (assume that the volume remains constant.)
The pH value of the resulting solution is 11.9.
To calculate the pH value of the solution we need to calculate the molarity (c) of the solution, using the number of moles of HCl (n) and the volume of the solution (V = 662 mL = 0.662 L).
c = n/V
To obtain the number of moles of HCl, we are going to use the mass of HCl (m = 18.4 g) and its molar mass (M = 36.5 g/mol):
n = m/M
n = 18.4 g / 36.5 g/mol
n = 0.504 mol
Now we can calculate the molarity:
c = 0.504 mol / 0.662 L
c = 0.761 M
Because HCl is a monoprotic acid, the molarity of the solution is equal to the concentration of H⁺ ions ([H⁺] = 0.761 M), which is important for calculating pH:
pH = -log[H⁺]
pH = -log(0.761)
pH = 11.9
You can learn more about the pH value here:
brainly.com/question/28580519
#SPJ4
which of the following pairs of aqueous solutions will form a precipitate when mixed? a) nh4no3 k2co3 b) hg2(no3)2 nabr c) kcl li3po4 d) agc2h3o2 cu(no3)2 e) none of the above solution pairs will produce a precipitate.
Hg2(NO3)2 NaBr will precipitate when combined in an aqueous solution without a catalyst at room temperature.
What is an aqueous solution?A solution that uses water as the solvent is said to be aqueous. It is frequently represented in chemical equations by adding to the relevant chemical formula.
To represent a solution of table salt, or sodium chloride, in water, the symbol Na+ + Cl can be used.
In an aqueous solution, liquid water acts as the solvent.
In other words, the ions and molecules that make up the solute (dissolved) are surrounded by the water molecules and incorporated into their web of connections.
The dissolved organisms then spread out across the water.
An aqueous solution is, to put it simply, anything that has dissolved in water.
The water sign represents (aq).
A substance that has been dissolved in water is called an aqueous solution.
Therefore, Hg2(NO3)2 NaBr will precipitate when combined in an aqueous solution without a catalyst at room temperature.
Learn more about aqueous solutions here:
brainly.com/question/19587902
#SPJ1
Which of the following statements correctly identifies the synthesis reaction and explains why?
Only chemical reaction X, because one reactant is a compound
Only chemical reaction Y, because both reactants are elements
Neither chemical reaction X nor Y, because they have only one product
Both chemical reactions X and Y, because there are two reactants and a single product
Due to the presence of two reactants and a single product, both chemical reactions X and Y are possible.
Which of the following claims about a synthesis reaction is accurate?A synthesis reaction results in the formation of a single product that is more complicated than the initial reactants when two or more reactants are present.
Which of the following sums up a synthesis reaction the best?When two or more reactants unite to create a single product, the reaction is called a synthesis. The general equation A + B = AB is used to describe this kind of reaction.
According to the definition of synthesis reactions, two reactants unite to create a chemical. In a synthesis reaction, two or more substances mix chemically to generate a single compound or a product.
To know more about synthesis reaction visit:-
https://brainly.com/question/24936069
#SPJ13
Answer: A
Explanation: It said on Course Hero