When deciding on your evidence for argumentation writing, make sure each piece passes the following criteria:
Purpose, accuracy, and authority
Currency, relevance, and audience
O Tone, accuracy, and relevance
O Authority, writing mode, and currency

The mass flow rate of water is 0.08757 kg/s

mCp (T2 - T1) = Q =w

m x 1.015 (360-315) = 4000

m = 4000/ 1.015 x 10^3 x (360-315)

m = 0.08757 kg/s

The density of water at 68°F / 20°C has a flow rate in our example of about 998 kg/m3. However, as the density of water varies with temperature, salinity, and pressure, use our water density calculator if you want to be extremely accurate. 30.58 lbs/s of mass flow were shown by the gadget.

By dividing the volume flow rate by the fluid’s mass density, one can determine the mass flow rate. The cross-sectional vector area, A, is multiplied by the flow velocity of the mass elements, v, to determine the volume flow rate.

The mass of a substance that moves per unit of time is known as the mass flow rate in physics and engineering.

To know more about mass flow rate visit:

https://brainly.com/question/13348162

#SPJ4

The effect of friction on air: B. is relevant only within the planetary boundary layer.

In Science, there are different types of force that acts on a physical object and these include the following:

Frictional force can be defined as a type of force that resists and slows the relative motion of two physical objects when there surfaces come in contact. This ultimately implies that, a frictional force prevents two surfaces from easily sliding over or slipping across one another.

Based on scientific research and experiments, we can reasonably infer that the effect of friction on air is relevant and important only within the planetary boundary layer.

Read more on friction and air here: https://brainly.com/question/28134112

#SPJ4

Complete Question:

The effect of friction on air:

A. increases wind speed.

B. is relevant only within the planetary boundary layer.

C. causes airflow to cross isobars rather than run parallel to them.

D. increases the Coriolis force. E. increases with height.

The corresponding wavelengths for these jumps are as follows:

[tex]\lambda_{7-2}[/tex] = 397.7 nm

[tex]\lambda_{6-2}[/tex] = 411 nm

[tex]\lambda_{5-2}[/tex] = 434.9 nm

[tex]\lambda_{4-2}[/tex] = 487.1 nm

[tex]\lambda_{3-2}[/tex] = 657.5 nm

The distance that is present between ant two successive crests of a wave, mostly points present between a sound wave or electromagnetic wave. Wavelength is also called as the distance between identical points (adjacent crests) in the adjacent cycles of any waveform signal that is propagated in space or along a wire.

Frequency, which is defined as the quantity of wave cycles per second, and wavelength have an inverse relationship. The wavelength of a signal decreases with increasing frequency.

To know more about wavelength, visit:

https://brainly.com/question/12924624

#SPJ4

The speed of the electron as it emerges from the field is; 388.587 m/s

Initial speed; v₀x = 1.1 * 10⁶ m/s

Acceleration in horizontal direction = 0 m/s²

distance; s_x = 2 cm = 0.02 m

Thus, formula to find time here is;

t = s_x/v₀x

t = 0.02/(1.1 * 10⁶)

t = 1.82 * 10⁻⁶ s

Now for the vertical distance; v,y_o = 0 m/s

Thus, the equation of motion becomes;

s_y = ¹/₂at²

0.005 = ¹/₂a(1.82 * 10⁻⁶)²

Solving for a gives;

a = 3.02 * 10¹³ m/s²

Thus the speed of the electron as it emerges from the field is;

v² = u² + 2as

v = √(0² + 2(3.02 * 10¹³ * 0.005))

v = 388.587 m/s

Read more about Electron speed at; https://brainly.com/question/15094100

#SPJ1

Complete Question is;

An electron is projected with an initial speed v0 = 1.1 * 10⁶ m/s into the uniform field between the parallel plates. The distance between the plates is 1 cm and the length of the plates is 2 cm. Assume that the field between the plates is uniform and directed vertically downward, and that the field outside the plates is zero. The electron enters the field at a point midway between the plates. E = N/C

find the speed of the electron as it emerges from the field?.

The mass of the girl is 30.6 Kg.

Inertia, a fundamental property of all matter, can be quantified as mass. In essence, it's the resistance of a mass of matter to changing its direction or speed in reaction to the application of a force. The more mass a body possesses, the smaller the change that is brought about by an applied force. The dimensionless quantity mass is used to express the amount of matter contained in a particle or object (symbolized m).

Given,

The pressure exerted by the girl = 15000 [tex]\frac{N}{m^{2}}[/tex]

Total area of contact = 0.02[tex]m^{2}[/tex]

As we know,

Pressure  = [tex]\frac{Force}{area}[/tex]

Force = Area x Pressure

Force = 0.02 x 15000

Force = 300N

For the conversion of weight into mass, use the formula "w = m x g." The gravitational pull on an object is referred to as its weight. The equation for the statement is written as w = m x g, or w = mg, by scientists.

Weight of the girl = Mass x Gravitational constant

300N = Mass of the girl x 9.8

Mass of the girl = 300 / 9.8

Mass of the girl =  30.6 Kg

To learn more about mass please visit-
https://brainly.com/question/8666423

#SPJ9

A 900 kg car that exerts 5000 n of applied force on a level road while being opposed by 1000 n of friction -the acceleration of the car is 44.4  m/s².

Given that

To find

So, according the question

we have,

     mass of the car m = 900 kg

     applied force by car f = 5000 n

     friction force r = 1000 n

now,

    total net force (F) = applied force (f)- friction force (r)

                              F = 5000 - 1000

                              F = 4000 n

we know that,

                             F = ma

where,

      m = mass of car

       a = acceleration

So, putting the values of m and F,

                          4000 = 900 × a        

                                a  [tex]= \frac{4000}{900}[/tex]

                                a  =  44.4  m/s²

To learn more about acceleration please click on that link

https://brainly.com/question/12550364

#SPJ4

The velocity vector is (v = 3ti + 4tj + k) and the position vector is (x = (3t²/2 + 1) i + 2t²j + tk)

We need to know about vector to solve this problem. The velocity is depend on position vector and acceleration. It can be written as

v = dx / dt

where v is velocity, dx is displacement and dt is time interval.

By differentiating the velocity function, we can also get the acceleration

a = dv / dt

where a is acceleration.

From the question above, we know that

a(t) = 3i + 4j

Hence, the velocity is

a = dv / dt

dv = a . dt

v = ∫a . dt

v = ∫(3i + 4j) . dt

v = (3i + 4j)t + v(0)

because v(0) is k, thus

v = 3ti + 4tj + k

Find the position vector

v = dx / dt

dx = v . dt

x = ∫v . dt

x =  ∫(3ti + 4tj + k) . dt

x = (3t²/2 i + 2t²j + tk) + x(0)

because x(0) is i, thus

x = 3t²/2 i + 2t²j + tk + i

x = (3t²/2 + 1) i + 2t²j + tk

Find more on vector at: https://brainly.com/question/25811261

#SPJ4

A. Acceleration during launch = 4000 m/s²

B. Distance that the froghopper moves while its legs are pushing = 0.002 m

Kinematics is sometimes regarded as a subfield of mathematics and is sometimes referred to as the geometry of motion. But in physics, it serves as the basis for classical mechanics. Without considering the forces that propel an item, kinematics studies how an object moves. It gives a description of the spatial positions of bodies or systems of material particles as well as the velocities and rates of change of those velocities.

t = 0.001 s

u = 4 m/s

PART A :

a = Δv / t

a = [tex]\frac{4m/s}{0.001s}[/tex]

a = 4000 m/s²

Therefore, Acceleration during launch = 4000 m/s²

PART B :

S = ut +  [tex]\frac{1}{2}[/tex]at²

S = 0(0.001s) + [tex]\frac{1}{2}[/tex]  x 4000 m/s² (0.001)²

S = 0.002 m

Therefore, the Distance that the froghopper moves while its legs are pushing = 0.002 m

To know more about Acceleration and kinematics, refer to this link :

brainly.com/question/13479383

#SPJ4

Answer:

why?

Explanation:

Do you need any help on anything else?

The tension in the cord is equal to centripetal force which is 32 newton.

We need to know about centripetal force to solve this problem. When an object moves in a circular motion, the object is experiencing centripetal force. The magnitude of centripetal force is

Fc = m . v²/R

where Fc is the centripetal force, m is mass, v is velocity and R is the radius.

From the question, we know that

m = 2 kg

v = 4 m/s

R = 1 m

The tension in the cord is equal to centripetal force

T = Fc

T = m . v²/R

T = 2 . 4² / 1

T = 32 N

Hence, the tension in the cord is 32 newton.

Find more on centripetal force at: https://brainly.com/question/898360

#SPJ4

The time interval taken by the ball to strike the ground is 1.75 s.

First calculate the vertical velocity by using the kinematics equation of motion for constant acceleration.

Finally use the equation of motion which relates the vertical velocity with time and calculate the time.

The equation of motion for constant acceleration is,  

vf^2 = vi^2 + 2aΔy

vf is final velocity, vi is initial velocity, y  is vertical distance

vi = 7.60  vf = ? a = 9.8m/s^2  y = 29.3m

y = [tex]\sqrt{8.70^2-19.6-30.2[/tex]   , since height is vertical so we took -9.8 accelaration

y= -25.83

so now

The equation of motion which relates velocity with time is

vf = vi + at

t = [tex]\frac{ vf - vi }{ a}[/tex]

t = [tex]\frac{-25.83- (-8.70}{ -9.80}[/tex]

t = 1.748 s

To know more about  kinematics equation   visit : https://brainly.com/question/24458315

#SPJ4

Force necessary to overcome static friction= (μs mg ) / (cos Ф + μs sinФ)

We have to find Force(F) in terms of m, g,  Ф ,and μs

To get the value of F first we have to find the value of N by using the formula of friction,

F sin Ф + N - mg =0

N = mg - F sinФ

As the body does not move so the net force is zero, therefore we have,

FcosФ -μs N = 0

Now we have to put the value of N in the equation. To know the force necessary to overcome the static friction we have,

F cosФ - μs ( mg - FsinФ) = 0

F cosФ - μs mg + μs FsinФ = 0

F( cos Ф + μs sinФ ) = μs mg

F = μs mg/ (cosФ +μs sin Ф)

Therefore we get the value of F i.e., force in terms of m, g, Ф, and μs.

To more about the Force refer to the link given below:

https://brainly.com/question/13318621

#SPJ4

The complete question is:

If we want to find the size of the force necessary to just barely overcome static friction (in which case fs=μsN), we use the condition that the sum of the forces in both directions must be 0. Using some basic trigonometry, we can write this condition out for the forces in both the horizontal and vertical directions, respectively, as Fcosθ−μsN=0 Fsinθ+N−mg=0 To find the magnitude of force F, we have to solve a system of two equations with both F and the normal force N unknown. Use the methods we have learned to find an expression for F in terms of m, g, θ, and μs (no N).

The correct answer is 1.5 seconds.

We are aware that the differentiation is used to calculate the rate at which a quantity changes over time. We are aware that the velocity is the name given to the derivative of the displacement. Acceleration is what we get when we differentiate velocity.

x = t^4 - 6t^2 + 9t

To calculate the velocity, take the derivative.

v = 4t^2 - 12t + 9

To acquire acceleration, repeat the derivative.

a = 8t - 12

force:

F = ma

If a = 0, F = 0. As a result, when a = 0, the net force on the locomotive is equal to zero.

a = 0 = 8t -12

8t -12 = 0

8t = 12

t = 12/8 = 1.5 seconds

To learn more about acceleration refer the link:

https://brainly.com/question/20365677

#SPJ4

The potential difference between the plates will be 1552 Volts.

Voltage, or the difference in electric potential between two points, is defined as the amount of labor per unit of charge needed to move a test charge between the two points.

Given that a 3.7-f capacitor that stores sufficient energy to operate a 75.0-w

The potential difference will be calculated by the formula below:-

Q = I t            

Where I = charge / time

Q = V * C    

V C = I t

V = I t / C

V = 75 C/s x 60 sec / 2.9 faraday

V =  1552 Volts

To know more about potential differences follow

https://brainly.com/question/25923373

#SPJ4

The basic harmonic motion of the mass-spring system lasts for 5.024 seconds.

We have a 16-pound mass that is fastened to a spring with a 25-pound-per-foot spring constant. This entire spring and mass system is moving harmonically.

Simple harmonic motion (sometimes referred to as SHM) is a particular type of periodic motion in mechanics and physics in which the restoring force on the moving object is inversely proportional to the magnitude of the object's displacement and acts in the direction of the object's equilibrium position.

The particle's acceleration in a simple harmonic motion is geared toward its mean location and directly proportionate to its displacement. Simple harmonic motion results in the conservation of the particle's total energy. SHM is a cyclical motion.

Simple harmonic motion is demonstrated by bungee jumping. Due to the flexibility of the bungee cord, the jumper is experiencing SHM as it oscillates up and down.

To learn more about simple harmonic motion from the given link:

brainly.com/question/17315536

#SPJ4

Because of the cosmological principle, we can predict gravity works similarly on Earth as on Mars.

The cosmological principle says that an observer's view of the universe is independent of both the direction he looks and his location. This principle only applies to the universe's large-scale properties, but it does suggest that the world has no edge, implying that the big-bang origin took place not at a specific point in space, but instead throughout space at the exact time.

These two assumptions allow us to determine the history of the universe after a specific epoch known as the Planck time. Scientists are yet to discover what existed prior to Planck time.

To learn more about the cosmological principle: brainly.com/question/2005196

#SPJ4

The calculated greatest speed is v=0.725 vs.

The ratio of a moving object's speed to the fundamental speed of sound is known as the Mach number. Therefore, an object travelling at twice the speed of sound has a Mach number of 2. speed of sound, the rate at which sound waves move through various substances. Modern estimates of the speed of sound, in particular, for dry air at a temperature of 0 °C (32 °F), are 331.29 meters (1,086.9 feet) per second.

The sound speed is vs=331 m/s.

The duration is t=4.9s.

A=5g is the acceleration.

u=0 is the beginning speed.

Let v be the fastest possible speed without a blackout.

The initial equation of motion is given by v=u+at

v=0+5gt

v=5(9.81m/s2)(4.9s)

v=240m/s

v=240m/svs/331m/s

v=0.725 vs.

Learn more about speed here-

https://brainly.com/question/28224010

#SPJ4

Answer:

Rolling Friction

Explanation:

Friction always acts in the opposite direction to that of the motion of the other object. Meaning, friction slows down the motion of an object by exerting opposing forces on it

The body of mass is resting on a horizontal plane, then the normal force exerted onto it by stattic and kinetic frictional forces both have an equal magnitude. In addition, the net resultant force acting upon the body of mass will be zero.

To learn more about statistic friction, visit:

https://brainly.com/question/15202697

#SPJ4

It is advisable to purchase a new circuit breaker with a higher capacity, perhaps a 240V, 80-100A circuit breaker, as breaker trips happen regularly.

We know that power is distributed as

P = IV

P stands for power in watts.

I is the same as current in amps.

And V stands for the voltage difference in potential.

The circuit breaker's function is to handle 240V, 60A.

A current of more over 60A will therefore trip the circuit breaker. The circuit breaker trips OFF when there is a significant amount of electricity flowing through it.

Three 5000W heating elements are now present in the furnace, and each of them trips the circuit breaker. Additionally, this element develops gradually; it does not happen all at once. When turned ON, the first component will draw the following amount of electricity from the mains:

We are aware that the initial heating element has a 3000W power rating.

P = IV

[tex]I' = \frac{P}{V} = \frac{3000}{240}[/tex]

I' =  20.833amps

The circuit breaker is still operational in this scenario because of its 60A capacity.

The second heating element eventually turns on.

Furthermore, this will result in a current of

[tex]I'' = \frac{P}{V} = \frac{3000}{240}[/tex]

I" = 20.833amps

the total current drawn at this time is I = I' + I" = 20.833 + 20.833

I = 41.667 amps

Once more, the 60A capacity of the circuit breaker makes it still appropriate.

Eventually, the third component will trip ON once more, drawing current from:

I"' = [tex]\frac{P}{V} = \frac{3000}{240}[/tex]

I"' = 20.833 amps

The current drawn overall is now I = I' + I" + I"'

I = 20.833+20.833+20.833

I = 62.5 Amps

The breaker will trip because the current exceeds the circuit rating.

Advice: Since replacing the furnace might be too expensive, I will suggest that they purchase a new circuit breaker with a higher capacity, possibly a 240V, 80-100A circuit breaker.

The complete question is : You have been sent to a new home. The homeowner reports that sometimes the electric furnace trips the 240-V, 60-A circuit breaker connected to it. Upon examination, you find that the furnace contains three 5000-W heating elements designed to turn on in stages. For example, when the thermostat calls for heat, the first 5000-W element turns on. After some period of time, the second element will turn on, and then, after another time delay, the third element will turn on. What do you think the problem is, and what would be your recommendation for correcting it? Explain your answer.

Learn more about power here:

a. Nyquist rate = 30 kHz is the Nyquist rate.

compact disc (CD) records audio signals digitally by means of a binary code. Assume an audio signal bandwidth of 15 kHz.

⇒ According to the Nyquist criteria, the sampling frequency must be at least 2 times the bandwidth.

⇒Nyquist rate = 2 x 15 kHz

⇒Nyquist rate = 30 kHz

So that means we need to take at least 30,000 sample/s to meet Nyquist criteria.  

To learn more about The Nyquist rate refer to

https://brainly.com/question/25922783

#SPJ4

The billiard ball involves relaxation 80 cm

Displacement refers to the space among the very last and the preliminary role. Hence the displacement of the ball can be the distinction among the preliminary and the very last displacement.

Let the preliminary role be 0

Final role = 8 cm

So the distinction among preliminary role and very last role = 0 - 88 cm

So the billiard ball involves relaxation 80 cm at the back of its orbital role.

The displacement thickness for the boundary layer is described as the gap the floor could need to pass withinside the y-course to lessen the glide passing via way of means of a extent equal to the actual impact of the boundary layer.

The distance from the boundary floor where the rate reaches 99% of the mainstream speed is used as an arbitrarily defined measure of the thickness of the boundary layer indicated by the symbol.

To know more about displacement , visit :

https://brainly.com/question/28222758

#SPJ4

The correct answer is 223 days.

The relationship between the duration of revolution and the separation between the sun is shown by Kepler's third law. Using the notions of circular motion and the gravitational and centripetal forces, we may obtain this equation.

According to Kepler's third rule, the semi-major axis of an orbit is linked to the orbital period of a planet around the sun as follows:

p² = a³

where an is the semi-major axis/distance to the star and p is the orbital period in years.

It is said that a = 0.72 AU for Venus.

P= √(0.72 AU)^3 = 0.61 years.

365 days in a year = 222.9 ≈ 223 days.

To learn more about Kepler's third rule refer the link:
https://brainly.com/question/1608361

#SPJ4

The horizontal pulling force on the block is 22.5 N.

When a block is pulled by applying a force, friction also acts on it.

The net force is calculated by taking the net value of the two forces.

The free-body diagram(FBD) of the block,  is shown in the adjoining diagram.

Thus,

F - f = ma

Here F is the applied horizontal force and f is the frictional force.

Putting the given values in the above equation

F - 10 N = 5 x 2.5

F = 22.5 N

Thus, the horizontal pulling force on the block is 22.5 N.

To know more about "frictional force", refer to the following link:

https://brainly.com/question/13707283?referrer=searchResults

#SPJ4

The horizontal pulling force on the block is 22.5 N.

When a block is pulled by applying a force, friction also acts on it.

The net force is calculated by taking the net value of the two forces.

The free-body diagram(FBD) of the block,  is shown in the adjoining diagram.

Thus,

F - f = ma

Here F is the applied horizontal force and f is the frictional force.

Putting the given values in the above equation

F - 10 N = 5 x 2.5

F = 22.5 N

Thus, the horizontal pulling force on the block is 22.5 N.

To know more about "frictional force", refer to the following link:

brainly.com/question/13707283?referrer=searchResults

#SPJ4

The larger magnification will be based on Focal length

The narrower the focal length, the smaller the magnification, and the larger the focal length, the larger the magnification.

it is obvious that the angle of the photograph from the objective lens or reflect to the eyepiece could be narrower the higher the focal duration. therefore, the photo may be considered via the eyepiece deeper with out dropping attention the narrower the angle (higher focal period).

The intensity of consciousness is shorter than the focal period. It approach that in comparison to large focal lengths, decrease focal lengths provide you with much less focuser play.

although you could nevertheless acquire the equal magnification with either focal period, the shorter focal duration will lose awareness a great deal earlier than the bigger focal period.

Find out more information about the focal length.

https://brainly.com/question/16188698?referrer=searchResults

#SPJ4

Answer:

lol the SUN

Explanation:

Answer:

bro SUN just sun giving us heat

Answer:

The car moving at velocity 15 m/s will take 2.67 s to travel 40 m.

What do you mean by velocity?

An object's velocity can be defined as the rate of change in the object's position with respect to a frame of reference and time.

A rocket launching into space and a car going north on a busy freeway may both be quantified using velocity.

Explanation:

Velocity of the car = 15 m/s

Distance = 40 m

Therefore, time taken to travel 40 m at a velocity of 15 m/s

= 40/15 = 2.666 ≈ 2.67 s

To know more about velocity, click on the link

https://brainly.com/question/1856219

#SPJ9

Initially, an automobile is moving north at a speed of 23 m/s. If the automobile accelerates at [tex]1.1 m/s^{2}[/tex] in the direction of travel, its speed after 5.3 seconds will be 28.83 m/s.

The initial speed of the car u = 23 m/s

Time is taken t = 5.3 s

Acceleration, a = [tex]1.1 m/s^{2}[/tex]

the first movement equation (Vf =Vi + at) offers with time, acceleration, very last pace, and starting pace. the first equation of motion can be used to calculate time, acceleration, beginning pace, and final pace.

Applying 1st equation of motion,

v = u + at

v = 23 + 1.1 × 5.3       (Since both beginning speed and acceleration are in the same direction)

⟹  v = 28.83 m/s      (due North)

Know more about the first motion equation:

https://brainly.com/question/20381052

#SPJ4

Answer:

The swimmer must swim at 1.12 m/s at 26.565 ° upstream from the opposing bank, according to the parallelogram rule of vectors.

What is parallelogram law of vector addition?

If two vectors act along two consecutive sides of a parallelogram (with magnitude equal to the length of the sides) both heading away from the common vertex, then the resultant is represented by the parallelogram's diagonal passing through the same common vertex.

Explanation:

Let, the current's speed be x = 0.5 m/s, the swimmer's speed be y m/s and the angle between them be a°. The resulting speed at b° angle with x will be r = 1.0 m/s. Assuming b is 90°.

Then, the parallelogram law of vectors states that

Sin b = y Sin a/r

=> y Sin a = r

=> y Sin a = 1

And Cos b = (x + y Cos a)/r

=> y Cos a = -x = -0.5

Therefore, tan a = 1/ (-0.2)

=> tan a = -2

As a result, a = 116.565°

Consequently, y = 1/Sin a

=> y = 1/ Sin116.565°

=> y = 1.118 ≈ 1.12 m/s

To learn more about parallelogram law, click on the given link

https://brainly.in/question/30000335

#SPJ9