When 1 mole of N2(g) reacts with O2(g) to form NO2(g) according to the following equation, 66. 4 kJ of energy are absorbed.

N2(g) + 2 O2(g) When 1 mole of N2(g) reacts wi 2 NO2(g)

Is this reaction endothermic or exothermic? endothermic exothermic

What is the value of q? kJ

The net ionic equations are as follows:

a. [tex]OH^-(aq) + H^+(aq)[/tex] → [tex]H_2O(l)[/tex]

b. [tex]Ca(s) + 2H^+(aq)[/tex] → [tex]Ca^{2+}(aq) + H_2(g)[/tex]

c. [tex]Ca + 2HCl + 2H_2O[/tex] → [tex]Ca(OH)_2 + H_2[/tex]

a. The neutralization of NaOH with HCl can be represented by the following balanced chemical equation:

NaOH + HCl → NaCl + [tex]H_2O[/tex]

To write the net ionic equation, we need to show only the species that are involved in the chemical reaction. The complete ionic equation is:

[tex]Na^+(aq) + OH^-(aq) + H^+(aq) + Cl^-(aq)[/tex] → [tex]Na^+(aq) + Cl^-(aq) + H_2O(l)[/tex]

The net ionic equation is:

[tex]OH^-(aq) + H^+(aq)[/tex] → [tex]H_2O(l)[/tex]

b. The dissolution of calcium in acid can be represented by the following balanced chemical equation:

Ca + 2HCl → [tex]CaCl_2 + H_2[/tex]

To write the net ionic equation, we need to show only the species that are involved in the chemical reaction. The complete ionic equation is:

[tex]Ca(s) + 2H^+(aq) + 2Cl^-(aq)[/tex] → [tex]Ca^{2+}(aq) + 2Cl^-(aq) + H_2(g)[/tex]

The net ionic equation is:

[tex]Ca(s) + 2H^+(aq)[/tex] → [tex]Ca^{2+}(aq) + H_2(g)[/tex]

c. The dissolution of calcium in water can be represented by the following balanced chemical equation:

[tex]Ca + 2H_2O[/tex] → [tex]Ca(OH)_2 + H_2[/tex]

To combine equations a and b so they result in equation c, we can first write the net ionic equation for the neutralization of NaOH with HCl:

[tex]OH^-(aq) + H^+(aq)[/tex] → [tex]H_2O(l)[/tex]

Then, we can substitute [tex]OH^-[/tex] with Ca and [tex]H^+[/tex] with 2HCl from the net ionic equation for the dissolution of calcium in acid:

[tex]Ca(s) + 2H^+(aq)[/tex] → [tex]Ca^{2+}(aq) + H_2(g)[/tex]

The resulting equation is:

[tex]Ca + 2HCl + 2H_2O[/tex] → [tex]Ca(OH)_2 + H_2[/tex]

which represents the dissolution of calcium in water.

For more such questions on Net ionic equation.

https://brainly.com/question/22885959#

#SPJ11

Answer:

38.89302738712 litres

Explanation:

pv =nRT

V = nRT/p where R is the ideal gas constant R=8.314 J/mol·K

p in atm to p in pascal = x 101325

V = (102)(8.314)(316)/(68 x 101325)

V = 0.03889302739 m3

m3 to l = x 1000

0.03889302739 x 1000

V = 38.89302738712 litres

please mark my answer brainliest

The portion of the metal that is corroding is called the anode. In a galvanic cell, the anode is the electrode where oxidation occurs, resulting in the release of electrons. In the case of corrosion, the anode is the region of the metal surface where electrons are released, and the metal ions are formed, leading to the degradation of the metal.

Corrosion is an electrochemical process where a metal corrodes due to the reaction with its environment, leading to a loss of structural integrity and reduced lifespan of the material. It occurs when the anodic reaction, where metal is oxidized, and the cathodic reaction, where electrons are gained, happen simultaneously, leading to a flow of electric current between the two regions.

To prevent corrosion, various techniques can be used, including coating the metal with a protective layer, controlling the environmental conditions, or using a sacrificial anode, where a more reactive metal is used instead of the original metal. Understanding the anodic and cathodic regions of the metal surface is critical in identifying and preventing corrosion.

Learn More about oxidation here :-

https://brainly.com/question/13182308

#SPJ11

For a concentration of PBDEs in herring gull eggs, doubling time for PBDEs in this source is 0.778 yrs. The concentration in 2010 is equals to 44.16 ppm.

We have a concentration of PBDEs in herring gull eggs from the Great Lakes was about 1100 ppb in 1990.

Concentration in 2000 = 7000 ppm

= 7000 × 10³ ppb

We have to doubling time for PBDEs in this source and concentration in 2010.

Time = 10 yr

The rate constant is [tex]k = \frac{ 2.303 }{t} \frac{ log[a]}{log[a - x]}[/tex],

Plugging the values, [tex]k = \frac{ 2.303 }{10} log( \frac{ 7000× 10³ }{1100})[/tex]

= 0.875/yr

Doubling time = 0.69/k

= 0.778 yrs.

Now, the we determine the concentration in 2010. Let the concentration be equal x.

[tex]0.778 = \frac{ 2.303 }{10} log(\frac{ x}{7000 })[/tex]

=> [tex]\frac{ x}{7000 \: ppm} = 10^{3.8}[/tex]

=> x = 44.16

Hence, required value is 44.16 ppm.

For more information about Concentration, visit:

https://brainly.com/question/28564792

#SPJ4

Anion exchange chromatography is a technique commonly used in protein purification. The retention of an amino acid on an anion exchange column depends on the interaction between the positively charged amino acid molecule and the negatively charged resin of the column.

For amino acids that are positively charged at neutral pH, such as lysine, arginine, and histidine, they will interact strongly with the negatively charged resin of the anion exchange column. This will result in increased retention time for these amino acids on the column. As the concentration of salt in the mobile phase is increased, these positively charged amino acids will be displaced from the column.

On the other hand, amino acids that are negatively charged at neutral pH, such as aspartic acid and glutamic acid, will not interact with the negatively charged resin of the anion exchange column. This results in minimal retention time on the column. As the concentration of salt in the mobile phase is decreased, these negatively charged amino acids will interact more strongly with the column, increasing retention time.

Amino acids that are neutral at neutral pH, such as glycine, alanine, and valine, will not interact strongly with the anion exchange column. Therefore, they will have minimal retention time on the column, regardless of the salt concentration in the mobile phase.

In conclusion, the retention of amino acids on an anion exchange column is dependent on the interaction between the charge of the amino acid and the resin of the column. By manipulating the salt concentration in the mobile phase, it is possible to elute amino acids of interest from the column, which can be useful in protein purification techniques.

For more such questions on Anion exchange column.

https://brainly.com/question/31580968#

#SPJ11

Answer:

The specific heat of the steel can be calculated using the formula:

Q = mcΔT

where Q is the heat transferred, m is the mass of the steel, c is the specific heat of the steel, and ΔT is the change in temperature.

First, calculate the heat transferred from the steel to the water:

Qsteel = mcΔT = (525 g)(c)(100 °C - 55 °C) = 27675c J

Next, calculate the heat transferred from the water to the steel:

Qwater = mcΔT = (375 g)(4.184 J/g. °C)(55 °C - 25 °C) = 50202 J

Since the heat lost by the steel is equal to the heat gained by the water:

Qsteel = Qwater

27675c J = 50202 J

c = 1.81 J/g. °C

Therefore, the specific heat of the steel is 1.81 J/g. °C.

Explanation:

Explanation:

0.5 mol HCl represents the amount of HCl in moles and 0.50 M HCl represents that there are 0.5 mol HCl per 1 L solution.

The decay constant for the radioactive isotope in this problem is approximately 0.069[tex]h^-^1[/tex].

The activity of a radioactive isotope is the rate at which it decays, and is measured in becquerels (Bq). The activity of a sample of radioactive material decreases over time as the number of radioactive nuclei in the sample decreases due to radioactive decay.

The rate of radioactive decay is described by the first-order rate law, which relates the rate of decay to the number of radioactive nuclei present in the sample. The rate constant (λ) for radioactive decay is a characteristic property of the isotope and is related to its half-life (t1/2) by the equation:

t1/2 = ln(2)/λ

where ln(2) is the natural logarithm of 2, which is approximately 0.693.

To find the decay constant for the radioactive isotope in the given problem, we can use the following equation:

A = A0 e^(-λt)

where A is the activity at time t, A0 is the initial activity, and t is the time elapsed since the initial measurement.

Substituting the given values into this equation, we get:

80.2 Bq = 114 Bq e^(-λ(3 h 50 min))

Converting the time elapsed to hours, we get:

t = 3.833 h

Substituting this value, we get:

80.2 Bq = 114 Bq e^(-λ(3.833 h))

Dividing both sides by 114 Bq, we get:

0.704 = e^(-λ(3.833 h))

Taking the natural logarithm of both sides, we get:

ln(0.704) = -λ(3.833 h)

Solving for λ, we get:

λ = -ln(0.704)/3.833 h

λ ≈ 0.069 h^-1

for more such questions on radioactive

https://brainly.com/question/18640165

#SPJ11

The correct answer is B. The half-life period of a zero order reaction is given by the equation 0.693/[A]k, where [A] is the initial concentration of the reactant and k is the rate constant for the reaction. This equation shows that the half-life period is independent of the initial concentration of the reactant, which is a characteristic of zero order reactions.

For a zero-order reaction, the half-life period is given by the following formula:

Half-life (t½) = [A₀] / 2k

Where:
- t½ is the half-life period
- [A₀] is the initial concentration of reactant A
- k is the rate constant for the reaction

So, the correct answer is:

D. 2[A]₀/k

Learn more about :

zero order reaction : brainly.com/question/30752435

#SPJ11

a.)  The Volume of water displaced is  3 ml

b.)  The final density of the mineral is 4.1 g/ml.

(a) The volume of water displaced is the ratio of the volume containing mineral to the volume excluding mineral.

Volume of water displaced = Volume with mineral - Volume without mineral

Volume of water displaced = 53 ml - 50 ml

Volume of water displaced = 3 ml.

(b) The following formula can be used to determine the mineral's density:

Mass / Volume equals density.

The difference between the mass of the mineral and the mass without the mineral is the mass of the mineral.

Mass of mineral = Mass with mineral - Mass without mineral

Mass of mineral = 12.3 g - 0 g (since the mass without mineral is not given)

Mass of mineral = 12.3 g

By deducting the volume without the mineral from the volume with, one may determine the volume of the mineral.

Volume of mineral = Volume with mineral - Volume without mineral

Volume of mineral = 53 ml - 50 ml

Volume of mineral = 3 ml

Therefore, the density of the mineral is:

Density = Mass of mineral / Volume of mineral

Density = 12.3 g / 3 ml

Density = 4.1 g/ml

Therefore, the final density of the mineral is 4.1 g/ml.

For such more question on Volume:

https://brainly.com/question/29796637

#SPJ11

The number indicates neutral on a pH scale is 7. Therefore the correct option is option E.

The acidity or basicity (alkalinity) of a solution is gauged using the pH scale. With 0 being the most acidic and 14 being the most basic, it has a range of 0 to 14.

Since a solution's pH is 7 or higher, it is regarded as neutral because it is neither acidic nor basic. The pH of pure water at normal temperature is 7, which is regarded as neutral.

While bases have a pH above 7, acids have a pH below 7, with lower numbers suggesting greater acidity and higher numbers indicating greater basicity. Therefore the correct option is option E.

For such more question on neutral:

https://brainly.com/question/24652228

#SPJ11

The electronic configurations for neutral atoms are:

Gallium (Ga): [tex]1s^{2} 2s^{2}2p^{6} 3s^{2}3p^{6} 4s^{2} 3d^{10}4p[/tex]

Chlorine (Cl): [tex]1s^{2} 2s^{2}2p^{6} 3s^{2}3p^{5}[/tex]

Phosphorus (P): [tex]1s^{2} 2s^{2}2p^{6} 3s^{2}3p^{3}[/tex]

Calcium (Ca): [tex]1s^{2} 2s^{2}2p^{6} 3s^{2}3p^{6} 4s^{2}[/tex]

Sulfur (S): 1s^2 2s^2 2p^6 3s^2 3p^4[tex]1s^{2} 2s^{2}2p^{6} 3s^{2}3p^{4}[/tex]

Arranging the atoms according to both decreasing atomic radius and increasing first ionization energy (IE):

Largest radius: Ca > Ga > P > S > Cl

Smallest radius: Cl < S < P < Ga < Ca

Smallest first IE: Ca < S < P < Cl < Ga

Largest first IE: Ga > Cl > P > S > Ca

Note: Atomic radius generally increases down a group and decreases across a period, while first ionization energy generally decreases down a group and increases across a period.

To know more about electronic configuration:

https://brainly.com/question/29757010

#SPJ4

The following balanced half-reaction can be used to depict the reduction of aqueous nitrous acid (HNO₂) to gaseous nitric oxide (NO) in basic aqueous solution:

HNO₂ (aq) + 3e⁻ → NO (g) + 2OH⁻ (aq)

The process through which an atom or an ion gains one or more electrons is known as reduction, according to the electronic idea.

The reduction of aqueous nitrous acid (HNO₂) to gaseous nitric oxide (NO) in basic aqueous solution can be represented by the following balanced half-reaction:

HNO₂ (aq) + 3e⁻ → NO (g) + 2OH⁻ (aq)

This half-reaction shows that nitrous acid is reduced by gaining three electrons and that hydroxide ions are present in the reaction as a result of the basic aqueous solution. The stoichiometry of the reaction requires 1 mole of HNO₂ to be reduced for every 3 moles of electrons transferred, and produces 1 mole of NO gas and 2 moles of OH⁻ ions for every mole of HNO₂ reduced.

Learn more about reduction on:

https://brainly.com/question/8493642

#SPJ11

Entropy will change as a result of a change in the number of gas motes present in a response.

Entropy is the intensity present in the substance frame with steady pressure. The entropy change of the response goes up as the operative number goes up.

In a loose sense, entropy is a measure of energy quality, with lower entropy indicating advanced quality. The energy put down in a painstakingly requested manner( the effective library) has lower entropy.

Entropy is high in chaotically stored energy( the arbitrary-pile library). The substance's intelligence and molarity have a direct impact on the response's entropy.

It is known that the entropy increases when there are more intelligencers of the product.

To know more about Entropy,

brainly.com/question/30481619

#SPJ4

The teeter totter analogy can help us understand the balance of gases in the bloodstream. When there is a decrease in CO₂ levels in the blood, it can cause the teeter totter to shift in the opposite direction. This means that the pH of the blood becomes more alkaline, as there are fewer acidic molecules present.

The body maintains a delicate balance of gases in the bloodstream, with the respiratory system playing a key role in regulating CO₂ levels. If CO₂ levels become too low, it can cause respiratory alkalosis, a condition where the blood becomes too alkaline. This can be caused by hyperventilation, as excessive breathing can cause too much CO₂ to be expelled from the body.

In terms of the teeter totter analogy, a decrease in CO₂ levels would mean that there are fewer weights on the acid side, causing it to rise. This can lead to symptoms such as dizziness, tingling sensations, and muscle spasms.

It's important to note that low CO₂ levels can also be caused by underlying medical conditions, such as metabolic disorders or lung disease. If you are experiencing symptoms of respiratory alkalosis, it's important to seek medical attention to determine the underlying cause and receive appropriate treatment.

To know more about bloodstream, refer to the link below:

https://brainly.com/question/21914036#

#SPJ11

The number of grams of excess reactant is 1.16 grams of NH₃.

To calculate the number of grams of excess reactant, we first need to determine the limiting reactant, which is the reactant that is completely consumed and determines the amount of product formed. The other reactant is considered the excess reactant.

Given;

Mass of NH₃ = 3.46 g

Mass of HCl = 4.91 g

To determine the limiting reactant, we can compare the moles of each reactant using their respective molar masses.

Molar mass of NH₃ (ammonia) = 17.03 g/mol

Molar mass of HCl (hydrogen chloride) = 36.46 g/mol

Moles of NH₃ = mass of NH₃ / molar mass of NH₃

Moles of HCl = mass of HCl / molar mass of HCl

Plugging in the given values;

Moles of NH₃ = 3.46 g / 17.03 g/mol

= 0.2031 mol

Moles of HCl = 4.91 g / 36.46 g/mol

= 0.1347 mol

To calculate the amount of excess reactant, we subtract the moles of the limiting reactant from the moles of the excess reactant;

Excess moles of NH₃ = Moles of NH₃ - Moles of HCl

Excess moles of NH₃ = 0.2031 mol - 0.1347 mol

= 0.0684 mol

Now, we can calculate the mass of the excess reactant using its molar mass;

Mass of excess NH₃ = Excess moles of NH₃ × molar mass of NH₃

Mass of excess NH₃ = 0.0684 mol × 17.03 g/mol

= 1.16 g

To know more about reactant here

https://brainly.com/question/2948214

#SPJ1

The Ksp for AgSCN is 1.1 × 10⁻¹².

The half-reaction for the formation of AgSCN is: Ag⁺(aq) + SCN⁻(aq) → AgSCN(s)

The standard potential for this half-reaction is given as 0.09 V.

The standard potential for the reduction of Ag⁺ to Ag(s) is 0.80 V. Using the Nernst equation:

We can calculate the equilibrium constant, Kc, for the reaction from the cell potential as:

Substituting the values:

Simplifying and solving for Kc:

Since the reaction is a 1:1 stoichiometry, we can use the Kc as the Ksp value for AgSCN. Therefore, the Ksp for AgSCN is 1.1 × 10⁻¹².

To learn more about electrode potential, here

https://brainly.com/question/17060277

#SPJ1

Enabling auto-tagging allows for automatic tagging of certain attributes or information within a system or program.

This can save time and effort by eliminating the need for manual tagging and ensuring accuracy in the tagging process. Enabling auto-tagging is a process that allows an analytics or advertising platform to automatically assign tags to specific elements in a campaign or website. This helps in tracking and organizing data more efficiently, making it easier to analyze and optimize your online presence. When auto-tagging is enabled, the system will automatically generate and add tags to your URLs or content without the need for manual input, saving time and effort.

To learn more about website click here https://brainly.com/question/19459381

#SPJ11

The bonds that are responsible for the digestibility of amylose and amylopectin are known as glycosidic bonds.

These bonds link the glucose molecules together in the starch molecules, and the way in which they are structured determines the extent to which they can be broken down by digestive enzymes.

Amylose and are both componentamylopectin s of starch and contain different types of bonds, which contribute to their digestibility. Amylose primarily contains α-1,4-glycosidic bonds, while amylopectin has both α-1,4-glycosidic bonds and α-1,6-glycosidic bonds.

The α-1,4-glycosidic bonds in amylose result in a linear structure, whereas the α-1,6-glycosidic bonds in amylopectin lead to a branched structure.

These variations in bonding affect their digestibility by enzymes such as amylase, with amylose being more resistant to digestion compared to amylopectin.

Overall, the digestibility of starches is an important consideration for nutrition and health, as it can impact how efficiently our bodies can utilize the energy and nutrients contained within these important dietary sources.

Learn more about difference between amylose and amylopectin : https://brainly.com/question/2833794

#SPJ11

We need 0.125 moles of LiCl to make a 0.50 M solution in 0.250 L of solution.

The volume of solution = 0. 250 L

Molarity of solution = 0. 50 M

A mole is described as the quantity of a substance that includes as many particles that are bonded together in a compound as there are atoms in exactly 12 g of carbon 12 isotope.

To find the number of moles of LiCl, we can use the formula:

moles of solute = concentration of solute * volume of solution

moles of LiCl = 0.50 mol/L x 0.250 L

moles of LiCl = 0.125 mol

Therefore, we can conclude that we need 0.125 moles of LiCl to make a 0.50 M solution in 0.250 L of solution.

To learn more about Moles of LiCI

https://brainly.com/question/10040164

#SPJ4

In the reaction, H₂PO₄⁻(aq) + H₂O (l) ⇔ HPO₄⁻(aq) + H₃O+ (aq), H₂PO₄⁻ is the conjugate acid and HPO₄² is the conjugate base.

According to a more detailed definition, a conjugate base is the base member, X-, of two compounds that transform into one another by gaining or losing a proton. The conjugate base has the ability to gain or lose a proton during a chemical reaction.

The formula for the conjugate base is the formula for the acid minus one hydrogen. The reacting base transforms into its conjugate acid. The formula of the conjugate acid is the formula of the base plus one hydrogen ion.

When an acid and base undergo a Bronsted-Lowry reaction, the original acid loses its proton and transforms into a conjugate base. The original base similarly takes on a proton and changes into a conjugate acid. There is a conjugate base for every acid and vice versa for every base.

Learn more about conjugate base here

https://brainly.com/question/28545620

#SPJ11

The value of ΔH∘rxn is -804.3 kJ/mol, under the condition that the given reaction is Mg(OH)₂(s)→hMgO(s)+ H₂O.

The given standard enthalpy of formation of Mg(OH)2 is +37.1 kJ/mol and that of MgO is -601.6 kJ/mol. Utilizing these values, we can evaluate the standard enthalpy change for the reaction
ΔH∘rxn = ΣnΔH∘f(products) - ΣmΔH∘f(reactants)

Here
ΔH∘f = standard enthalpy of formation for each species
n and m = specific stoichiometric coefficients concerning the products and reactants.
For this given reaction,
Mg(OH)₂(s) → MgO(s) + H₂O(g)
So n = 1 and m = 1.
Staging the values
ΔH∘rxn = [ΔH∘f(MgO) + ΔH∘f(H₂O)] - ΔH∘f(Mg(OH)₂)
ΔH∘rxn = [-601.6 kJ/mol + (-241.8 kJ/mol)] - (+37.1 kJ/mol)
ΔH∘rxn = -804.3 kJ/mol


To learn more about enthalpy
https://brainly.com/question/16985375
#SPJ4

The percent error for the mineral is 5.4%.

The absolute difference between the actual value and the experimental value is taken, divided by the actual value, and multiplied by 100 to provide the percent error, which is a measure of the precision of a measurement or calculation.

The percent error can be calculated using the formula:

Percent error = (|experimental value - actual value| / actual value) x 100%

Substituting the given values, we get:

Percent error = (|4.1 g/ml - 3.89 g/ml| / 3.89 g/ml) x 100%

Percent error = (0.21 g/ml / 3.89 g/ml) x 100%

Percent error = 0.054 x 100%

Percent error = 5.4%

Therefore, the percent error for the mineral is 5.4%.

For such more question on mineral:

https://brainly.com/question/13866810

#SPJ11

Both calcium and magnesium reacts with water form their corresponding hydroxides along with the evolution of hydrogen gas. Calcium forms calcium hydroxide whereas magnesium forms magnesium hydroxide with water. But calcium reacts more violently with water.

The reactivity of metals depends on their capacity to lose electrons. The nucleus of calcium is farther away from the valence electrons and thus exert a smaller electrostatic pull on those electrons than the nucleus of magnesium.

Reactivity depends on ability to lose electrons. So calcium can lose electrons more easily and hence it is more reactive.

To know more about reactivity, visit;

https://brainly.com/question/11879757

#SPJ1

Natural gas is primarily composed of methane. Therefore the correct option is option E.

However, traces of other hydrocarbon molecules like ethane, propane, and butane as well as non-hydrocarbon gases like nitrogen, carbon dioxide, and helium can also be found in natural gas.

Natural gas is created from the decayed organic matter of extinct plants and animals that were buried, subjected to tremendous pressure, and heated for millions of years.

As a result, their organic content gradually broke down and changed into hydrocarbon molecules.

Because it burns relatively cleanly and emits less carbon dioxide than other fossil fuels like coal and oil, natural gas is a popular energy source. Therefore the correct option is option E.

For such more question on Natural gas:

https://brainly.com/question/25649765

#SPJ11

The reaction between acetylene gas and oxygen gas results in the formation of carbon dioxide gas and water vapor. In the given reaction, acetylene (C₂H₂) is the limiting reactant, resulting in the production of 4 moles of carbon dioxide (CO₂). The moles of acetylene used in the reaction are 1.97, leading to the formation of 3.94 moles of CO₂.

The balanced chemical equation for the reaction is:

2 H₂ + 5 O₂ -> 4 CO₂ + 2 H₂O

Using the given amounts of acetylene and oxygen:

moles of C₂H₂ = / = 3.94

moles of O₂ = / = 68.97

The limiting reactant is acetylene since it produces fewer moles of product. Therefore, only half of the acetylene will be consumed in the reaction.

moles of C₂H₂ used = 3.94 / 2 = 1.97

Using the mole ratio from the balanced equation, the moles of CO₂ produced will be:

moles of CO₂ = 1.97 mol C₂H₂ × (4 mol CO2 / 2 mol C₂H₂) = 3.94 mol CO₂

Rounding to the nearest whole number, the answer is: 4 mol CO₂.

To know more about the limiting reactant refer here :

https://brainly.com/question/2948214#

#SPJ11

The correct answer is d) rate=k[A]². When we use the integrated rate law for second-order reactions, we assume a rate law that resembles rate=k[A]².  In this equation, the rate of the reaction is determined by the rate constant (k) multiplied by the concentration of the reactant A squared ([A]²). This is characteristic of second-order reactions.

This is because the rate of the reaction is proportional to the square of the concentration of the reactant A. By plotting the concentration of A versus time and using the integrated rate law equation for a second-order reaction, we can calculate the rate constant and determine the reaction order.

Learn more about second-order reactions at https://brainly.com/question/17586293

#SPJ11

It is crucial to understand that when a specific solution is described in terms of molarity or molar concentration (M).

Thus, The unit of concentration actually refers to the number of moles of solute that are present per litre of the solution.

The concentration of the calcium chloride solution in the given problem is 0.80 M, meaning that 0.80 moles of calcium chloride are present in one litre.

The molarity, M, is the number of moles of a pure substance present in a litre of a solution, whereas the molar mass, M, is the mass of a mole of a pure material.

Thus, It is crucial to understand that when a specific solution is described in terms of molarity or molar concentration (M).

Learn more about Solution, refer to the link:

https://brainly.com/question/30665317

#SPJ1

Based on their ability to absorb infrared light, chemical compounds may be recognised and described using infrared spectrum and infrared spectroscopy, a potent analytical technique.

IR spectroscopy may be used to validate the creation of acetylsalicylic acid (aspirin) and find any unreacted starting materials (salicylic acid and acetic anhydride) in the aspirin manufacturing process.

The characteristic salicylic acid absorption bands, which include a broad and strong peak in the 3300-2500 cm-1 range due to the O-H stretching vibration and a sharp peak at about 1700 cm-1 due to the C=O stretching vibration of the carboxylic acid group, would be visible in the IR spectrum as evidence of unreacted salicylic acid. Consequently, by contrasting the product's IR spectrum with other IR spectra.

Learn more about infrared spectrum visit: brainly.com/question/14783701

#SPJ4

You need to add 42 grams of glucose to make 1500 grams of a 2.8% glucose solution.

To calculate the amount of glucose you need to add to make 1500 grams of a 2.8% glucose solution, you first need to determine what 2.8% by mass means.

2.8% by mass means that there are 2.8 grams of glucose per 100 grams of solution.

So, if you want to make 1500 grams of a 2.8% glucose solution, you can use the following equation:

mass of glucose = (percent by mass / 100) x total mass of solution

mass of glucose = (2.8 / 100) x 1500

mass of glucose = 42 grams

To know more about glucose solution, here

brainly.com/question/14937397

#SPJ4