How many liters will 90.0 grams of xenon gas (Xe) occupy at STP?
HELP PLEASE
Answer:
22.4L
Explanation:
not sure if its totally correct but I tried
*please be serious *
What is one way active transport is different from diffusion ?
Answer:
Explanation:
During active transport, molecules move from an area of low concentration to an area of high concentration. This is the opposite of diffusion, and these molecules are said to flow against their concentration gradient.
Why does an ionic bond transfer electrons instead of sharing?
When there is a whole transfer of valence electron between the atoms is called an ionic bond. In this type of bond construction, the atoms get contrarily charged.
The ionic bonds are formed due to electronegativity. According to Pauling, the capability of an atom to draw electrons towards itself is called electronegativity.
When there is a huge contrast in electronegativity between the atoms, the electrons are completely transferred between the atoms.
The atom that relinquishes an electron are called a cation and is positive whereas the atom that acquires an electron are called anions and are negatively charged.
Therefore, due to electronegativity, ionic bonds are formed.
To learn more about ionic bonds follow the link:
https://brainly.com/question/14484184
Which sentence best explains the relationship between pressure and the
solubility of a gas?
A. The greater the pressure, the more gas that will dissolve.
B. Solubility increases with pressure for some gases but not others.
C. The lower the pressure, the more gas that will dissolve.
D. Pressure has no effect on the solubility of gases.
Answer: A. The greater the pressure, the more of gas that will dissolve.
Explanation: Increasing pressure increases the solubility of gases. It has little effect on the solubility of liquids and solids.
how does atomic radius affect coulombic attraction?
TRUE or FALSE: The rock closest to the ridge is newer and younger than the older rock
further away from the ridge.
Answer:true
Explanation:
A beaker containing 6.32 moles of PBr3, contains___
molecules of PBrz.
A) 1712.7
B) 3.1 x 10^24
C) 3.8 x 10^24
D) 271
Answer:
3.8 x 10²⁴molecules
Explanation:
Given parameters:
Number of moles = 6.32moles
Unknown:
Number of molecules = ?
Solution:
The number of moles can be used to derive the number of molecules found within a substance.
Now,
1 mole of substance contains 6.02 x 10²³ molecules
6.32 mole of PBr₃ will contain 6.32 x 6.02 x 10²³ = 3.8 x 10²⁴molecules
True or False: Sulfur by itself isn't too bad, it's when it reacts with other elements that it can become dangerous
Answer:sulfer by itself is not pleasant and it can be dangerous by itself but in large amounts.
Explanation:
Answer:
True.
Explanation:
Also did you know that it is combined with chlorine that it becomes salt? Cool right? Two deadly things combining to become a condiment
a compared of magnesium nitric contains 72% of magnesium and 28% of nitrogen. what is the empirical formula of magnesium nitric.
and the answer is Mg 3 N 2
how to do the solution.
The empirical formula is the smallest comparison of atoms of compound =mole ratio of the components
The principle of determining empirical formula
• Determine the mass ratio of the constituent elements of the compound.
• Determine the mole ratio by dividing the percentage by the atomic mass
The empirical formula :
mol ratio Mg : N ⇒
[tex]\tt =\dfrac{72}{24~g/mol}\div \dfrac{28}{14~g/mol}\\\\=3\div 2\rightarrow Mg_3N_2[/tex]
If a metal donates or loses an electron it becomes a..
A. Ionic
B. Covalent
C. Metallic
Answer:
c
Explanation:
Answer:
the answer to your question is c
cholrine is an active non-metal.why?
where information about each element is located
Answer:
On the pereiodic table.
Explanation:
A car travels 65 miles in 1 hour. What is the average speed of the car?
All of the alkaline earth metals are similar in that – they are all artificially made elements they all have similar atomic weights. they all have the same ionic charge. they all show variable valences.
Answer:
they all have the same ionic charge.
Explanation:
Alkaline earth metals are group 2 metals on the periodic table. They are divalent elements because they have two valence electrons and ionize by donating these two valence electrons. Elements in this group have the same numbers of electrons in their outermost shell of their atoms. i.e. they all have the same number of valence electrons and ionic charge.
two negative charges are placed near each other. what happens between the charges
Answer:
repulsion
Explanation:
Answer:
Explanation:
In contrast to the attractive force between two objects with opposite charges, two objects that are of like charge will repel each other. ... Similarly, a negatively charged object will exert a repulsive force upon a second negatively charged object. Objects with like charge repel each other.
2 points
This occurs if milk overheats. Solids settle on the sides and some fall into
the bottom of the pan. It may caramelize, burn and develop an off-flavor.
Scorching
Scalding
Curdling
Foaming
Answer:
curdling.
Explanation:
What is atomic mass made of?
Answer:
Together, the number of protons and the number of neutrons determine an element's mass number: mass number = protons + neutrons. If you want to calculate how many neutrons an atom has, you can simply subtract the number of protons, or atomic number, from the mass number.
Explanation:
Mechanical advantage = load/_______
Answer:
Mechanical advantage = load/effort
Explanation:
Mechanical advantage is like a ratio of load to effort and many machines like pulleys depend on this relationship between load and effort for it to work.
Answer:
The formula of mechanical advantage is Load÷effort
Explanation:
Mechanical advantage is the ratio of the load to the effort i.e. MA=Load(L)÷Effort(E)
0.45 g of hydrated sodium carbonate crystals were heated until 3.87 of anhydrous power remained.
How many moles of water are there in one mole of hydrated salt?
Formula of hydrated sodium carbonate : Na₂CO₃.10H₂O, so moles of water in one mole of hydrated salt = 10
Further explanationHydrate is a compound that binds water (H₂O), usually in the form of crystals/ solids
If these compounds are dissolved in water or heated, the hydrates can decompose:
Example: X.YH₂O (s) → X (aq) + YH₂O (l)
The formula for the hydrated compound contains: YH2O
The mole ratio shows the ratio of the coefficients of the hydrate compound
10.45 hydrated sodium carbonate(Na₂CO₃.xH₂O) were heated until 3.87 of 3.87of anhydrous (Na₂CO₃) remained, so
mass H₂O released :
[tex]\tt 10.45-3.87=6.58~g[/tex]
mass Na₂CO₃ = 3.87 g
mol ratio Na₂CO₃(MW= g/mol) : H₂O(MW=18 g/mol) =
[tex]\tt \dfrac{3.87}{105,9888}\div \dfrac{6.58}{18}=0.0365\div 0.3655=1\div 10[/tex]
A group of tourists were on an outing when they noticed that precipitation began to fall. The air temperature was 32 degree Fahrenheit. What type of precipitation did they most likely see?
Answer:
The correct answer is - rain.
Explanation:
At 32 degrees c or zero degrees Celsius, droplets of water in the atmosphere do not freeze as it is not the temperature at which water freezes but it is the temperature at which ice melts.
At this temperature the water changes its state, below 32 degrees Fahrenheit the water freezes but in the atmosphere, it not freezes necessarily and remains in the liquid state and called super-cooled liquid or water. Above this temperature, water in liquid state.
Thus, the precipitation is in the form of rain.
I need help please and thank you
Answer:
ooooooooooooooooooh i dont know this one
Explanation:
im not good a math at all
atoms are so small that approximately _________ of them can fit on the head of a needle?
Answer:
5 million
Explanation:
Which model best represents a pattern?
Antenne UHF
Chaum
RTG
Master
Antenne
grand gain
DAN
REMS
RAD
SAM
Chemin
When an ionic bond forms what type of ions are joined?
The chemical equation for the combustion of acetylene (C2H2) is given below.
2C2H29) + 502(9)—-4C02(g) + 2H2O(g)
What volume of oxygen at STP is required for the complete combustion of 100.50 mL of C2H2?
Answer:
309.2 ml of oxygen
Explanation:
2 ( 12X2 +Ix 2 ) = S2 ml
O2 = 5 x 16 x 2 = 160 ml
volume of O2 needed = 160×100. 5 / 52 = 309.2 ml
Answer:
d
Explanation:
Question:
In a laboratory demonstration, a balloon filled with methane and oxygen was exposed to a
flame. The result was a brief, large flame. The students were asked to formulate an equation for
the reaction. One answer is below.
CH, + 0 = CO,
This equation is incorrect.
A. Explain how and why it is incorrect
B. What would the correct equation be, and how do you know that?
Answer:
The laboratory demonstration consists of the following;
The compounds present in the combustion reaction = Methane, CH₄ and Oxygen, O₂
The chemical equation for the combustion reaction is given as follows;
CH₄ + 2O₂ → CO₂ + 2H₂O
Therefore;
A. The equation given as CH₄ + O → CO₂ is not correct because;
1) Oxygen gas exist as diatomic molecules, O₂, and given that the experiment involves the mixture of gases, the oxygen gas present which can exist as a separate compound, should be represented as O₂
2) The number of oxygen molecules in the reaction is two rather than one
3) The product also includes two molecules of water (vapor) H₂O
B. The correct equation for the reaction should be given as follows;
CH₄ + 2O₂ → CO₂ + 2H₂O
B i) The constituents of the equation is obtained by the knowledge of the fact that the combustion reaction of an organic substance such as methane in the presence of oxygen yields, carbon dioxide and water (vapor)
The equation showing the relative amounts the reacting compounds is by balancing the basic equation of the combustion of methane in the presence of oxygen
Explanation:
Electric circuit are a pathway for ____ to flow
A.) Neutrons
B.) Protons
C.) Matter
D.) Electrons
Answer:
Electrons
Explanation:
The source that gives the voltage (force) causes the electrons to move.
Answer:
The answer is Electron
Explanation:
Which best explains the difference between a monomer and a polymer?
A monomer is larger than a polymer.
A monomer contains carbon and a polymer does not.
A polymer contains carbon and a monomer does not.
A polymer is larger than a monomer.
The difference between the monomer and a polymer should be that monomer should be larger than a polymer.
Difference of monomer and a polymer?The monomer represent the molecule type where it has the capability for chemically the bond along with the other molecules with respect to the long chain. While the polymer should represent the chain of the non-specified the no of monomers.
Also, it represent the building blocks of polymers that contain more complex type of molecules
Learn more about polymer here: https://brainly.com/question/13209535
Answer:
A
Explanation:
Which is the correct Lewis dot structure for BeH2 ?
The correct Lewis dot structure for [tex]BeH_2[/tex] is Be : H : H
What does the Lewis dot structure show?The Lewis dot structure shows the valence electrons as dots. The valence electrons of beryllium are shown as 2 dots on the left side of the atom.
The central atom, beryllium, has 2 valence electrons where each hydrogen atom has 1 valence electron. To form a stable molecule, beryllium shares its 2 valence electrons with the 2 hydrogen atoms, each of which shares its 1 valence electron with beryllium which gives each atom a full outer shell of electrons.
Learn more about Lewis dot structure at:
https://brainly.com/question/28652824
#SPJ6
PLEASE HELP!!!!
7. According to Mohs Hardness scale, which of these groups of minerals can scratch fluorite? А. B. talc, calcite, and apatite calcite, quartz, and topaz apatite, orthoclase, and corundum diamond, gypsum, and quartz C.
Answer:
B
IS THE CORRECT ANSWER