Answer:
3520
Explanation: Force = Mass x Acceleration [∴ or F = ma]. Given values. mass, m = 1600 kg; initial velocity, u = 8 m/s; final velocity, v = 30 m/s; time taken, t = 10 s.
A flywheel is rotating with an angular velocity of 1.4 rad/s and is acted on by an acceleration of 0.6 rad/s².
a) What angular velocity will it have attained after three complete turns?
b) How long will it take to do those three turns?
(a) The final angular velocity of the flywheel after 3 complete revolutions is 4.96 rad/s.
(b) The time taken for the flywheel to make 3 complete revolutions is 5.93 s.
Final angular velocityThe final angular velocity of the flywheel after 3 complete revolutions is determined by applying third kinematic equation as shown below;
θ = 2π (rad/rev) x (3 rev) = 18.85 rad
ωf² = ωi² + 2αθ
ωf² = (1.4)² + 2(0.6)(18.85)
ωf² = 24.58
ωf = √24.58
ωf = 4.96 rad/s
Time of motionThe time taken for the flywheel to make 3 complete revolutions is calculated as follows;
ωf = ωi + αt
t = (ωf - ωi)/α
t = (4.96 - 1.4)/0.6
t = 5.93 s
Learn more about time of motion here: https://brainly.com/question/2364404
Which situation results in no work being done?
O lifting an object off the ground
O throwing a baseball to your friend
O carrying a book at a constant velocity
O pushing a car that will not start out of the garage
Answer:
C
Explanation:
C should be the right answer
Look at the diagram. Both cars start from the same point. Which describes the motion shown?
A:One car travels south at 4 m/s. The other car travels east at 2 m/s.
B:One car travels north at 4 m/s. The other car travels west at 2 m/s.
C;One car travels north at 2 m/s. The other car travels east at 4 m/s.
D: One car travels south at 4 m/s. The other car travels west at 2 m/s. 7 of 10
Answer:
I can't see anything so I can't to answer this question
Answer:
I think it MIGHT be A Can't see much ....
Explanation:
What is the name for a supporting force that acts upward and in a direction perpendicular to a surface
calculate the kinetic energy of a 71 kg man running at 5 m/s
Answer:
887.5 J
Explanation:
Kinetic energy is the energy gained by a body due to its motion.
Its formula is :-
KE = [tex]\frac{1}{2} mv^{2}[/tex]
m = massv = velocityValues we are given :
m = 71 kgv = 5 m/sSubstituting :
KE = 1/2 x 71 x 5²KE = 35.5 x 25KE = 887.5 JWhich of the following predictions is likely to be correct?
A
If it is August, shadows will soon be longer.
B
If it is March, shadows will soon be longer.
C
If it is September, shadows will soon be shorter.
D
No matter what time of year it is, shadows will remain the same.
Answer:
D
No matter what time of year it is, shadows will remain the same.
Explanation:
Answer:
A
Explanation:
Late in the year the sun the earth is tilted away from the sun that means the sunlight is not coming in as directly. So, shadows during are longer.
Choose the clincher sentence that best restates the following topic sentence.
Scientists recently discovered that fun is not just fun; it's
good for the brain.
O A. Not having fun can be bad for the brain.
O B. Fun is definitely good for the brain!
O C. Sometimes, you can have too much fun for the brain to process.
O D. A fun activity like horseback riding can actually make the brain
smarter.
A car of mass 10.0 ks traveling at 5.00 m/s comes to rest due to friction after traveling 20.0 m. What is the work done on the car by the friction?
A. –125 J
B. –50 J
C. 50 J
D. 125 J
The work done on the car due to friction is -125 J.
What is workdone?Work is said to be done when a force moves an object through a certain distance.
To calculate the workdone on the car by friction, we use the formula below
Formula:
W = m(v²-u²)/2.......... Equation 1
Where:
W = Work done due to fricionm = mass of the carv = Final velocityu = Initial velocityFrom the question,
Given:
m = 10 kgv = 0 m/su = 5 m/sSubstitute these values into equation 1
W = 10(0²-5²)/2W = 5(-25)W = -125 JHence, The work done on the car due to friction is -125 J.
Learn more about work done here: https://brainly.com/question/21854305
which of the following states statements are true
1 sound travel faster in high temperature 2 sound travel slower in cold air i than Hot air
what is the voltage of a circuit with power 36 W and current 4.5 A
Answer:
8 v
Explanation:
power = watts = v i
36 = v (4.5)
v = 8 v
Is it possible for a person to have zero mechanical energy?
Answer:
no
Explanation:
Question 1 of 25 Which produces the most energy?
Answer:
electric stuff
Explanation:
I didn't see any option choices so srry
A lever where the input force is between the fulcrum and the output force (a broom) is what type of lever?
Answer:
first class lever
in a first class lever fulcrum is b/w input and output force
Questions #19 and 20:
Part 1 of 2: A Carnot engine has a power output of 122 kW. The engine operates between two reservoirs at 9 °C and 458 °C. How much thermal energy is absorbed each hour? Answer in units of J.
Part 2 of 2: How much thermal energy is lost per hour? Answer in units of J.
(1) The thermal energy absorbed by the Carnot engine is 7.15 x 10⁸ J.
(2) The thermal energy lost per hour by the Carnot engine is 2.75 x 10⁸ J.
Thermal energy entering the heat engineThe thermal energy absorbed by the heat engine is calculated as follows;
[tex]Q_h = \frac{P\Delta t}{1 - T_c/T_h}[/tex]
where;
Tc is the temperature of the cold reservoir = 9 + 273 = 282 KTh is the temperature of the hot reservoir = 458 + 273 = 731 K[tex]Q_h = \frac{(122,000) \times (3600)}{1 - \frac{282}{731} } \\\\Q_h = 7.15\times 10^8 \ J[/tex]
Thermal energy lost by the heat engineThe thermal energy lost per hour by the heat engine is calculated as follows;
[tex]Q_c = Q_h - P\Delta t\\\\Q_c = (7.15 \times 10^8 )\ - \ (122,000 \times 3600)\\\\Q_c = 2.75 \times 10^8 \ J[/tex]
Learn more about heat lost by Carnot engine here: https://brainly.com/question/25819144
Suppose that a sound wave has a wavelength of 12 meters and a frequency of 100Hz. What is the speed of sound
Answer:
1200Hz
Explanation:
You would have to multiply 12 by 100 to get the answer.
12 • 100 = 1200 Hz
I hope it helps! Have a great day!
Anygays-
elastic materials maintain their nature in all circumstance. true or flase
Answer:
False
Explanation:
If an elastic material is stretched with enough force it will go beyond its 'Elastic Limit' otherwise known as its 'Limit of Proportionality'.
When this happens permentant deformation wiil occur.
Think of a spring... if it is stretched with enough force it won't return back to its original shape. Therefore it has NOT maintained its nature.
Lake point tower in chicago is the tallest apartment building in the united states. suppose you take the elevator from street level to the roof of the building. the elevator moves almost the entire distance at constant speed, so that it does 1.15x10^5j of work on you as it lifts the entire distance. if your mass is 60.0 kg how tall is the building.
Using the idea of work done under gravity, the height of the building is 187 m.
Work done in a gravitational fieldWe must recall that the work done in a gravitational field is given by; mgh
m= mass
g = acceleration due to gravity
h = height
mass = 60.0 kg
Workdone = 1.15x10^5 J
W = mgh
h = W/mg
h = 1.15x10^5 J/60.0 kg * 9.8 ms-2
h = 187 m
Learn more about work done: https://brainly.com/question/13662169?
The dimensions of a triangle are shown below.
What is the area of the triangle?
Answer:
7. answered because ia an pro
Explanation:
[tex]area = \frac{1}{2} bh[/tex]
[tex]area = \frac{1}{2} \times 60 \times 50[/tex]
[tex]area = \frac{3000}{2} [/tex]
[tex]area = 1500mm ^{2} [/tex]
A tank contains compressed air at 5 ATM. What is the pressure in pascals?
Answer:
1 atm = 1.01E5 nt/m^2 = 1.01E5 pascals
5.05E5 nt/m^2 = 5.05E5 pascals
1 pascal = 1 nt/m^2
How does nuclear fusion differ from nuclear fission
Answer:
They are the polar opposite of each other.
How?Nuclear fusion is when two or more atomic nuclei combine together to form a different atomic nuclei. Nuclear fission is when the atom splits into two smaller nuclei.
What is the wasted energy in each of the energy transfers?
a) clockwork toy
b) boy kicking a football
c) boiling kettle on a gas ring
d) person walking upstairs
Answer:
a person walking upstairs is a wasted energy
A cart with mass 2m has a velocity v before it strikes another cart of mass 3m at rest. The two carts couple and move off together with a velocity of?
Answer:
2/5 v
Explanation:
Use conservation of momentum
originally mv = 2m v
after the crash mv is still the same (2mv)
but the mass is now 5m x where x is the new velocity
2mv = 5 mx
x = 2/5 v
The momentum of two objects in a collision is conserved. Hence, the total initial momentum is equal to the final momentum of the coupled mass. Here the final velocity will then be 2/5 v.
What is momentum ?Momentum of a moving object is the product of mass and velocity. It is a vector quantity with direction and magnitude. The total momentum of two colliding bodies is equal to the total final momentum after collision.
Let m1 and m2 be the masses and v1 and v2 be the final velocities. Vt be the velocity of the coupled mass.
Then, m1 v1 + m2 v2 = (m1 + m2) Vt
Given, mass of cart 1 = 2m
cart 2 = 3m
velocity of cart 1 = v
cart = 0 since it was at rest.
Then, 2m v + 0 = (2m + 3m) Vt
Vt = 2/5 v
Therefore, the final velocity of the couple of carts will be 2/5 v.
Find more on momentum:
https://brainly.com/question/24030570
#SPJ2
what type of matter is always made up of only one kind of atom
Define the following words:
Phylogenetic:
Bifurcation:
Taxonomy:
Prokaryote:
Eukaryote:
Virus:
Classification:
Biotype:
(brainliest if you use your own words) please hurry!!!
Which law represents a balanced chemical equation? A. Avogadro’s hypothesis B. ideal gas law C. law of conservation of mass D. Newton’s first law of motion E. Newton’s second law of motion
Design a hypothetical structure to be used as a 500,000 square-foot office space in Los Angeles, California. Create a drawing with labels for dimensions and describe any specifications for materials and other features that will add to its structural integrity in the event of a typical earthquake event in that area. Incorporate at least three features to help maintain the building’s structural integrity during an earthquake. Describe how each feature will improve the building’s earthquake resistance
To design an earthquake-resistant structure, we must take several aspects into account, such as materials and construction techniques.
What is an earthquake resistant structure?An earthquake-resistant structure is a term that refers to a type of structure that has the characteristic of resisting earthquakes without being destroyed or seriously affected.
Earthquake-resistant structures were developed to prevent tragedies due to the collapse of structures during earthquakes. Generally, to make a structure earthquake resistant, materials are used that resist the movements of the earth without breaking.
The most used materials to make earthquake-resistant structures are:
WoodConcreteBricksMetals (iron, steel, others)Among others.Additionally, earthquake-resistant structures include specific construction techniques that allow them to arrange materials in a certain way to resist movement.
According to the above, the best option to build a 500 square foot earthquake-resistant structure is a 25-foot-wide by 20-foot-long single-story structure to make it more resistant to earth movements.
Learn more about Earthquake resistant structure in: https://brainly.com/question/14163993
A car travels from City A to City B to the north. It takes 4 hours, and the road mileage is 200 miles. The map shows that
the cities are only 80 miles apart (straight-line distance).
Answer:
The average speed would be the 200 miles/4 hours.
The average velocity would be the net displacement to the north at 80 miles/4 hrs = mph
Explanation:
What do sunspots, solar prominences, and solar flares all have in common?.
m=3000km v=25m/s what’s the momentum
Momentum of the given body will be : 75000 Kg m/s
Explanation:According to Newton's first law of motion, all bodies continue to be in the state of rest or motion unless an external force is applied on the body. We can use this in the case of momentum also
The formula of momentum is given by :
[tex]:\implies \sf\quad \sf \: P = mv[/tex]
Here, we are given the mass of the body ( m ) as 3000kg and the velocity of the body ( v ) as 25 m/s. On putting the values in the formula:
[tex] \begin{aligned}&:\implies \sf\quad \sf \: P = mv \\& :\implies \sf\quad \sf \: P = 3000 \times 25 \\ & :\implies \sf\quad \sf \: \boxed{ \sf \: P = 75000kgm {s}^{ - 1} } \end{aligned}[/tex]
Momentum is associated with the mass of the moving body and can be defined as the quantity of motion measured as a product of mass and velocity.
Answer :-
Momentum is [tex] \bf{75,000 \: {kg \: ms}^{ - 1} } [/tex] .Explanation :-
As per the provided information in the given question, we have been given that The Mass is 3000 kg . The Velocity is given as 25 m/s . And, we have been asked to calculate the Momentum .
For calculating the Momentum , we will use the Formula :-
[tex] \bigstar \: \: \: \boxed {\sf { \: Momentum \: = \: Mass \: \times \: Velocity \: }} [/tex]
Therefore , by Substituting the given values in the above Formula :-
[tex] \dag \: \: \: \sf { Momentum \: = \: Mass \: \times \: Velocity} [/tex]
[tex] \Longrightarrow \: \: \: \sf { Momentum \: = \: 3000 \: \times \: 25} [/tex]
[tex] \Longrightarrow \: \: \: \textbf {\textsf {Momentum \: = \: 75000 }} [/tex]
Hence :-
Momentum = [tex] \bf{75,000 \: {kg \: ms}^{ - 1} } [/tex] .[tex] \underline {\rule {180pt} {4pt}} [/tex]
Pleaaaseee heeelp meeee