In the given redox reaction, the reducing agent is Cd (s).
When a chemical species "donates" an electron to an electron receptor, it is referred to as a reducing agent in chemistry (also referred to as a reductant, electron donor or reducer).
A reducing agent, which is often in one of its lesser oxidation states, serves as the electron donor. The loss of one electron in the redox reaction results in the oxidation of a reducing agent.
At the anode, oxidation reaction occurs:
[tex]Cd (s) \rightarrow Cd^2^+ (aq) + 2e^-[/tex]
At the cathode, reduction reaction occurs:
[tex]2Li^+ (aq) + 2e^- \rightarrow 2Li (s)[/tex]
The overall redox reaction is:
[tex]Cd (s) + 2Li^+ (aq) \rightarrow Cd^2^+ (aq) + 2Li (s)[/tex]
As it is known that the reducing agent is the one that undergoes oxidation in a redox reaction, therefore, Cd (s) is the reducing agent.
Learn more about Redox reactions here:
https://brainly.com/question/13293425
#SPJ4
What would be a rocket’s acceleration [a = (End velocity - Start velocity) / time] in space if it fires its engines and starts moving from 1000 m/s to 2500 m/s in 10 seconds?
The acceleration of the rocket would be 150 m/s^2.
Initial velocity, u=1000 m/s
Final velocity, v=2500 m/s
Time taken, t=10 seconds.
According to equation of motion,
v=u+at
2500=1000+10a
2500-1000=10a
1500=10a
a=150 m/s^2.
To know more about "acceleration" refer to the link here:https://brainly.in/question/544080
According to the law of multiple proportions, if 12 g of carbon combine with 16 g of oxygen to form co, the number of grams of carbon that combine with 16 g of oxygen in the formation of co2 is ________.
The weight of carbon that combines with 16 g of oxygen in the formation of CO2 is 12 g.
The law of multiple proportions was given by Dalton in 1803.
According to this law, when two elements combine to form more than one compound, the masses of one element that combine with a fixed amount of another element, are in the ratio of whole numbers.
For example,
hydrogen combines with oxygen to produce two compounds, water(H₂O) and hydrogen peroxide(H₂O₂).
Hydrogen + Oxygen ⇒ Water
2 g 16 g 18 g
Hydrogen + Oxygen ⇒ Hydrogen Peroxide
2g 32 g 34 g
Similarly, carbon also reacts with oxygen to form two different compounds, carbon dioxide(CO₂) and carbon monoxide(CO).
Carbon + Oxygen ⇒ Carbon Dioxide
12 g 32 g 44 g
Carbon+ Oxygen ⇒ Carbon Monoxide
12 g 16 g 28 g
Thus, the weight of carbon that combines with 16 g of oxygen in the formation of CO₂ is 12 g.
To know more about "law of multiple proportions", visit the following link:
brainly.com/question/28458716?referrer=searchResults
#SPJ4
a cell containing 97% h2o is placed into a 90% h2o solution. the solution is to the cell, which would cause the size of the cell to
A cell containing 97% h₂o is placed into a 90% h₂o solution. the solution is to the cell and there the size of the cell will shrink .
What is a solution ?A particular kind of homogenous mixture made up of two or more substances is known as a solution. The solution is formed when a solute is a substance that has been dissolved in a solvent, which is the other substance in the mixture.Solute + Solvent = Solution
The cell will cremate because the water in the solution will gets released and there the state of equilibrium exists and that can be determined as Hypertonic solution.
A liquid that has a higher concentration of dissolved particles than regular cells and blood do, like salt and other electrolytes. For instance, wounds are soaked in hypertonic liquids.
Learn more about solvent,
brainly.com/question/14797683
#SPJ4
The renal control mechanism of restoring the acid-base balance is accomplished through which process?
Re absorption of H[tex]CO_{3}[/tex] and excretion of H+ restores acid-base balance through the renal control mechanisms.
What is renal mechanism?
The renal system consists of the kidney, ureters, and therefore the urethra. the general function of the system filters approximately 200 liters of fluid a day from renal blood flow which allows for toxins, metabolic waste products, and excess ion to be excreted while keeping essential substances within the blood
Why is renal function important?
Renal function is important for homeostasis. The kidneys play important pleiotropic roles including removal of metabolic waste products and maintenance of water–electrolyte balance and vital sign . Early diagnosis of renal dysfunction and institution of appropriate therapy are vital to survival.
Learn more about renal control:
brainly.com/question/23945041
#SPJ4
questionyou heat two substances, a and b. both substances change color. when cooled, both substances return to their original colors.what most likely happened in this situation?
Two substances, a and b were heated. Both substances change color. when cooled, both substances return to their original colors.
What is a physical change?
A physical alteration only affects the object's shape; the object's interior structure (its molecules) remain unaltered. It is possible to change the created element back into the original thing. A alteration that can be undone is reversible. The condition, shape, or size of an object can change due to a physical change.
Here, since after heating both the substances a and b change colour and again on cooling return back to their original form (previous colour), thus we can conclude that a physical change occurs in them on heating which reverts back on cooling, being a reversible process.
To learn more about physical change from the given link below,
https://brainly.com/question/17609067
#SPJ4
The binding and release of sodium or potassium ions are due to conformational changes in the protein. True or false?.
true, I'm not 100% sure if it's true though
The chemical formula for octane is: ch3ch26ch3 calculate the molar mass of octane. round your answer to 1 decimal place.
The chemical formula for octane is: ch3ch26ch3 114073 is the molar mass of octane.
What is molar mass ?The molar mass of a chemical compound is determined in chemistry by dividing the mass of a sample of that compound by the quantity of that compound, which is the number of moles in that sample, measured in moles. A substance's molar mass is a bulk attribute rather than a molecular one. The compound's molar mass is an average over multiple samples, each of which will likely have a different mass because of the existence of isotopes.
The molar mass is most frequently calculated from the standard atomic weights, making it a terrestrial average and a function of the relative abundance of the constituent atoms' isotopes on Earth. The molar mass is suitable for converting between a substance's mass and a quantity.
To learn more about molar mass from the link:
https://brainly.com/question/837939
#SPJ4
If solutions of co(no3)3 and koh are mixed, how many precipitation reactions will occur?
If solution of Co(NO3)3 and KOH are mixed then following reaction will occur:
Co(NO₃)₃ + KOH → Co(OH)₃ + KNO₃
This is double displacement reaction.The ions swap positions in a double displacement process. The first ion's positive ion moves to the second ion's negative ion, and the second ion's positive ion moves to the first ion's negative ionIn this reaction cobalt nitrate reacts with potassium hydroxide to form cobalt hydroxide which is insoluble in water and therefore it will form precipitate in the solution.Other product will be potassium nitrate ( KNO₃). Nitrates are soluble in water therefore KNO3 will not form precipitate in the solution.let us balance the equation:
Co(NO₃)₃ +3 KOH → Co(OH)₃ +3 KNO₃
Now we will split strong electrolyte into ions:
Co³⁺ + 3NO₃⁻ + 3K⁺ + 3OH⁻ = Co(OH)₃ + 3K⁺ + 3NO₃⁻
So the net ionic equation will be
Co³⁺ + 3OH⁻ = Co(OH)₃
Learn more about double displacement reaction here:
https://brainly.com/question/27345563
#SPJ4
Consider a 0.5 l buffer that contains 0.12 m hocl and 0.080 m kocl. what is the ph of this buffer after adding 2.5 ml of 10m koh to the solution. (ka (hocl) = 3.5 x 10-8)
The pH of this buffer after adding 2.5 ml of 10m KOH to the solution is 7.73
What is the pH of this buffer after adding 2.5 ml of 10m KOH to the solution?The HOCl/KOCl buffer has a pKa of 7.46. We can use the H-H equation to determine the pH of this buffer:
[tex]pH = log\frac{ [A^{-} ] }{[HA]} + pKa[/tex]
[tex]pH = 7.46 + log\frac{[KOCl] }{ [HOCl]}[/tex]
Where [] represents the molarity (or moles) of each compound.
Initial HClO and NaClO moles:
HOCl :-0.500L * (0.12mol / L) = 0.06 moles HOCl
KOCl:- 0.500L * (0.080mol / L) =0.04 moles KOCl
HOCl now reacts with KOH to form KOCl:
[tex]HOCl + KOH[/tex]→ [tex]KOCl[/tex] + [tex]H_{2} O[/tex]
The moles of KOH in the reaction are as follows:
[tex]2.5x10^{-3} L * (10mol/L)=0.025 moles KOH[/tex]
That is, 0.025 moles of HOCl are consumed and 0.025 moles of KOCl are produced after the reaction.
Following the reaction, moles are:
The final moles:
HOCl:- 0.06mol - 0.025mol = 0.035mol HOCl
KOCl :-0.04mol + 0.025mol = 0.065mol KOCl
Replacing in the H-H equation:
[tex]pH = 7.46 + log\frac{ [0.065mol] }{ [0.035mol]}[/tex]
pH = 7.73
Learn more about Molarity here:-
https://brainly.com/question/10851381
#SPJ4
How much electrical energy is converted to light and thermal energy by a 130 w light bulb in one day?
468 KJ of electrical energy is converted to light and thermal energy by a 130 w light bulb in one day.
Define Electrical energyElectrical energy is produced when electrically charged particles move, producing energy. Electrical energy is a general term that describes the energy that has been transformed from electric potential energy. Electric current and electric potential are given by an electrical circuit that serves as the source of this energy (e.g., provided by an electric power utility). This electric potential energy stops being electric potential energy after it has been changed into another form of energy.
P = 130W is the lightbulb's power.
Within an hour, we must locate the electrical energy that the lightbulb generated. We are aware that the amount of electrical energy generated per unit of time is what provides electricity.
1 hour equals 3600 seconds.
p=E/T
E= p * T
E= 130 * 3600
E= 468000 joule
E = 468 kJ
Learn more about electric potential energy here:-
https://brainly.com/question/24043857
#SPJ4
the equilibrium of 2h 2 o(g) 2h 2 (g) o 2 (g) at 2,000 k has a k eq value of 5.31 x 10 -10 . what is the mass action expression for this system?
The mass expression for the system is K= (aH₂)² × aO₂ / (aH₂O)² = 5.31× 10⁻¹⁰.
First, we have to write a balanced chemical equation, i.e
2H₂O(g) ⇄2H₂(g)+O₂(g)
Now, from the above equation we can write mass action expression,
K= (aH₂)² × aO₂ / (aH₂O)² = 5.31× 10⁻¹⁰.
The mass action law provides simple method to write the expression for the equilibrium constant of any reaction. it is a universal law and applicable to all chemical reactions.
The ratio of the concentrations of the reactants and products is known as Equillibrium constant. It is represented as (K).
To learn more about mass action law, refer this link
https://brainly.com/question/1397320
#SPJ4
Calculate the energy of a gamma ray photon whose frequency is 5.02x10^20 Hz
The bohr radius theoretically is the __________ distance an electron can approach the nucleus in the hydrogen atom.
The bohr radius theoretically is the equal distance an electron can approach the nucleus in the hydrogen atom.
Bohr radius named after by Niels Bohr because Niels Bohr proposed the bohr model of an atom. Bohr radius is the mean radius of the orbit of an electron around the nucleus of a hydrogen atom at its ground state and is approximately equal to 5.29177×10⁻11 . the Bohr radius approximately equal to the most probable distance between the nucleus and the electron in a hydrogen atom in its ground state. so theoretically distance an electron is equal approach the nucleus in the hydrogen atom.
Know more about bohr radius
https://brainly.com/question/28535620
#SPJ4
A huge candy bar measures 35.6cm long, 3.8cm tall, and 4.2cm wide. The bar has a total Mass of 633.6
grams, including a delicious 198 grams of fat!
Calculate the Density of this wonder of the chocolate.
The density of the chocolate, given the data is 11.15 g/cm³
What is density?The density of a substance is simply defined as the mass of the subtance per unit volume of the substance. Mathematically, it can be expressed as
Density = mass / volume
How to determine the density of the chocolateThe following data were obtained from the question:
Dimension = 35.6 cm × 3.8 cm × 4.2 cmVolume = dimension = 35.6 cm × 3.8 cm × 4.2 cm = 568.176 cm³Total mass = 633.6 gDensity of chocolate =?The density of the chocolate can be obtained as follow:
Density = mass / volume
Density of chocolate = 633.6 / 568.176
Density of chocolate = 11.15 g/cm³
Learn more about density:
https://brainly.com/question/952755
#SPJ1
If solutions of ba(oh)2 and feso4 are mixed, how many precipitation reactions will occur?
2 precipitation reactions will occur.
A "chemical reaction occurring in an aqueous solution when two ionic bonds combine, yielding the creation of an insoluble salt" is what is meant by the term "precipitation reaction." Precipitates are the insoluble salts created during precipitation reactions. Precipitation reactions are often double displacement events that result in the formation of the precipitate, a solid form of residue.
The creation of insoluble salts that precipitate out of the solution results from these reactions when two or more solutions with various salt concentrations are mixed. The chemical reaction between potassium chloride and silver nitrate, in which solid silver chloride is precipitated out, is one of the greatest examples of precipitation reactions. This is the precipitation reaction's byproduct, the insoluble salt.
To learn more about precipitation reaction please visit-
https://brainly.com/question/24158764
#SPJ4
Which term best describes salt water made by combining table salt with pure water
Answer: "homogenous mixture." out of these 2
brine, salt water, particularly a highly concentrated water solution of common salt (sodium chloride).
HOPE THIS HELPS.✨
Suppose the United States adopted the international standard for
letter-sized paper. Explain at least two things that might result from this change
Answer:
. In the United States, a standard letter-sized piece of paper is 8.5 inches wide by 11 inches long. The international standard for a letter-sized piece of paper is different. The international standard is based on SI units: 21.0 cm wide by 29.7 cm long. a. Convert 21.0 cm to inches. Show your dimensional analysis setup. b. Convert 29.7 cm to inches. Show your dimensional analysis setup. c. State the dimensions, in inches, of the international standard for a letter-sized piece of paper. d. Which piece of paper is longer: a U.S. letter-sized piece of paper, or an international letter-sized piece of paper? e. Suppose the United States adopted the international standard for letter-sized paper. Explain at least two things that might result from this change
What is the best choice of reagent to perform the following transformation?.
a. h2o
b. h2so4
c. naoch3
d. kotbu
the best choice of reagent to perform the following transformation is H₂O and H₂SO₄
What is reagent with example?
In chemistry , the term "reagent" denotes a chemical ingredient, this will also be stated as an "Orko". this is often typically found in a compound. (a compound or mixture, typically of inorganic or small organic molecules) introduced to cause the specified transformation of an organic substance.Reagents could also be compounds or mixtures. In chemistry , most are small organic molecules or inorganic compounds.
What is difference between reagent and reactant?Reactant: Reactants are the starting materials that undergo changes during a reaction .
Reagent: Reagents are the compounds that are added to a system so as to cause a chemical reaction.
Learn more about reaction :
brainly.com/question/16416932
#SPJ4
15) CCC Patterns Changes in the state of matter (solid, liquid, gas) are
the result of different energy levels at the molecular level. Look
at the graph of the energy required to go from water ice to water
vapor. Describe the energy of the water molecules for each state.
The thermal energy of solid state is the least and the thermal energy for gaseous state is maximum.
Any substance that is present around us exists in three states i.e, solid, liquid and gas.
The two major factors that affect the state of the substance are thermal energy and intermolecular interactions. These factors are shown in the adjoining image.
When energy in the form of heat is provided to ice, it first converts into liquid water and finally into steam. This conversion has been shown in the graph present in the adjoining diagram.
As energy is added to it, the solid state has the lowest energy, the energy of the liquid state is more than the solid state and the maximum energy is of gaseous state.
To know more about "states of matter", refer to the following link:
https://brainly.com/question/9402776?referrer=searchResults
#SPJ1
If 30.0 ml of 0.15 m ba(oh)2 was needed to neutralize 50.0 ml of an h3po4 solution. what is the concentration of the original h3po4 solution?
Barium hydroxide is a strong diprotic base and phosphoric acid is a weak triprotic acid. Therefore the balanced acid-base reaction requires a 3:2 molar ratio:
First we find the moles of barium hydroxide reactant:
Volume of barium hydroxide (given) = V1=0.0300 L
Molarity of barium hydroxide (given) = C1=0.15 M
Moles of barium hydroxide = n1=V1×C1=0.0045 mol
For neutralization we require 2/3 the moles for phosphoric acid:
Moles of phosphoric acid = n2=23×0.0045 mol=0.0030 mol
Volume of phosphoric acid (given) = V2=0.0500 L
Molarity of phosphoric acid = n2V2=0.0030 mol/0.0500 L=0.060M
What is Neutralization Reaction?
3Ba(OH)2+2H3PO4→Ba3(PO4)2+6H2O
Conjugate base and acid are the results of the reaction between a Bronsted acid (proton donor) and a Bronsted base (proton acceptor). When both of these reactants have been completely consumed, leaving only the product species, a neutralisation reaction takes place. The stoichiometry of the balanced acid-base reaction equation is used to determine the ratio of molar amounts needed for neutralisation.
Therefore,
If 30.0 ml of 0.15 m ba(oh)2 was needed to neutralize 50.0 ml of an h3po4 solution. what is the concentration of the original h3po4 solution?
To learn more about Neutralization Reaction from the given link:
brainly.com/question/15255706
#SPJ4
Relative conductance is the ability of a specific conductor to carry electrons as compared to the ability of a(n) ___ conductor to carry electrons.
Relative conductance is the ability of a specific conductor to carry electrons as compared to the ability of a copper conductor to carry electrons.
The relative conductance (g'X) of a given ionic species is the conductance for that single ion divided by the total conductance for all of the ionic species (i.e., g'X = gX/g Total). The flow of free electrons in the form of an electric current is referred to as conduction. The inverse of resistivity is conductivity. That is 1/ and has a siemens per meter, or S/m, value. From zero (for a perfect insulator) to infinity, conductivity is possible (for a perfect conductor). A super conductor has nearly no ohmic resistance and limitless conductance
to learn more about conductor:
https://brainly.com/question/18084972
#SPJ4
I need help with ten and eleven
Answer:
11no:4.9%
Explanation:
4.9% bones are there in the human body in hips and legs
To make pizza dough, luca mixes 50 ml of milk for every 250 ml of flour. how many ml of milk does he mix with 750 ml of flour?
To make pizza dough, Luca combines 50 ml of milk for every 250 ml of flour. 150 ml of milk does combine with 750 ml of flour.
calculation :
[tex]\frac{50}{250}[/tex] × 750
= 150 ml
Is pizza dough just bread dough?
The distinction between Pizza and Bread dough is Pizza dough is made with a more elevated protein flour other than that they both use the exact ingredients, yeast, flour, salt, and water. Let the dough grow before freezing, then split the dough into your preferred pizza portions, put it in airtight freezer bags and freeze.
Pizza dough is made up with five basic ingredients flour, salt, yeast, oil, and water.
To learn more about the pizza dough :
brainly.com/question/17035013
#SPJ4
question 3 a reaction equation, shown below, consumes 5.0 g of a and 6.0 g of b. how many total grams of c and d should be obtained? 1 a 3 b → 2 c 4 d
5.0 g of a and 6.0 g of b will obtain 11g of c and d, according to the law of conservation of mass.
What is law of conservation of mass?
The law of conservation of mass, also known as the principle of mass conservation, states that for any system closed to all transfers of matter and energy, the system's mass must remain constant over time because the mass of the system cannot change, meaning that neither more nor less can be added or taken away.
This law states that regardless of the physical or chemical change, the total mass of the products and the total mass of the reactants stay the same. Also referred to as the "law of indestructibility of matter," the law of conservation of mass.
To learn more about conservation of mass click the given link
https://brainly.com/question/15289631
#SPJ4
for what maximum kinetic energy is a collision between an electron and a hydrogen atom in its ground state definitely elastic?
The calculated kinetic energy is 10.2 J
Measurements have been made of the cross section for the elastic scattering of electrons with energies lower than 10.2 eV by free hydrogen atoms. The signal from the electrons that were scattered by the beam appeared at the modulation frequency and at a predetermined phase, allowing for their identification. The ratio of the hydrogen atoms and the molecule's cross sections was directly measured, and absolute values for the atomic cross section were calculated using the absolute molecular cross-section.
The experimental findings support the theory.
Electron energy in the ground state is 0.13.6
In the second energy level, 3.4
Total energy level difference = 10.2
Thus, kinetic energy equals 10.2.
Therefore, we are aware that some electron kinetic energy was transmitted to the hydrogen atom during an elastic collision.
Learn more about Kinetic energy here-
https://brainly.com/question/12669551
#SPJ4
Question 2
Which of the following is an SI unit for expressing the mass of a block of Au?
A. M
B. L
C. Pound
D. G
The SI unit for expressing the mass of a block of Au is gram with SI unit symbol g.
SI unit is a measurement unit which is universally accepted system. It is used for technical and scientific work.
The gram is the unit of mass in the International systems of units, SI. Gram is equal to 1/1000th of a kilogram.
Mass is used to measure an objects's weight. Most common units to express mass in metric system is gram and kilogram. The standard unit of mass in SI system is kilogram (Kg). The reason to use kilogram is because gram is a small amount.
Although, in case of Au, the SI unit to express mass of Au is g.
To learn more about SI unit,
brainly.com/question/12904051
#SPJ1
a certain ore is 27.9'.9% nickel by mass. how many kilograms of this ore would you need to dig up to have 85.0 g85.0 g of nickel?
To get 85g of nickel, 0.304 kilogram of the ore must be mined.
27.9% of what = 85g
0.279 * x = 85
x = 304.6g = 0.304kg
What is ore?
Ore is a naturally occurring rock or silt that has one or more precious minerals in it that may be extracted, processed, and sold for a profit. Metals are the most common valuable minerals found in ore. To remove the valuable metals or minerals from ore, it is mined from the earth and then processed or refined, frequently by smelting.
An ore is a naturally occurring collection of minerals from which metals can be profitably extracted. Originally, the term "ore" solely referred to metallic minerals, but today it also refers to nonmetallic materials that have been deposited in rock after it has formed.
To learn more about ore click the given link
https://brainly.com/question/89259
#SPJ4
If one or more nucleotide pairs are deleted from a dna strand, this is known as a:_________
a. frameshift mutation
b. point mutation
c. missense mutation
d. silent mutation
If one or more nucleotide pairs are deleted from a DNA strand, this is known as a frameshift mutation.
What is frameshift mutation? explain its function.
An indel (insertions or deletions) of a number of nucleotides in a DNA sequence that is not divisible by three results in a frameshift mutation, also known as a framing error or reading frame shift. The triplet structure of gene expression by codons means that an insertion or deletion might alter the reading frame (the arrangement of the codons), leading to a translation that is entirely different from the original. A frameshift mutation is different from a single-nucleotide polymorphism, in which a nucleotide is substituted rather than inserted or deleted, and the protein is more altered the sooner in the sequence the deletion or insertion occurs.
Learn more about nucleotides here:-
https://brainly.com/question/10734675
#SPJ4
What type(s) of bonding would be expected for each of the following materials: brass (a copper-zinc alloy), epoxy, barium sulfide (bas), solid xenon, bronze, nylon, and aluminum phosphide (alp)?
The bonding expected for each material is covalent ,ionic and metallic bonds .
About bonds :
The force of attraction that leads to holding of atoms or ions together in a molecule or crystal is said be bonding. Bond formation can happen by either attraction or transfer of electrons. There are single, double, and triple bonds. There are many sorts of bonding namely:
Covalent (sharing of electrons takes place).
Ionic (transfer of electrons takes place)
Metallic (ionized atoms of metals and therefore the sea of electrons around them).
Brass (a copper-zinc alloy)
Brass is an alloy of metal that's copper and zinc. Hence, the metallic bonding is present within the brass.
Rubber
It is a polymer whose monomer unit is isoprene, which may be a covalent compound. The isoprene units are attached in repeated units to make rubber by covalent bonding.
Barium sulfide ()
Due to the large electronegativity difference between barium and sulfur, barium sulfide is an ionic compound. Thus, ionic bonding is present in barium sulfide.
Solid xenon
Only xenon atoms are present in solid xenon which are interacted by weak Van der Waal's interactions.
Bronze
Bronze is an alloy of metal that's copper and tin. Hence, the metallic bonding is present within the brass.
Nylon
It is a polymer whose monomer unit is caprolactam, which may be a covalent compound. The caprolactam units are attached in repeated units to make nylon by covalent bonding.
Aluminum phosphide ()
Aluminum phosphide may be a covalent compound and thus involves covalent bonding.
Learn more about chemical bonds:
brainly.com/question/819068
#SPJ4
a container filled with 45 kg of liquid water at 95°c is placed in a 90-m3 room that is initially at 12°c. thermal equilibrium is established after a while as a result of heat transfer between the water and the air in the room. using constant specific heats, determine (a) the final equilibrium temperature, (b) the amount of heat transfer between the water and the air in the room, and (c) the entropy generation. assume the room is well sealed and heavily insulated.
Thermal equilibrium is established after a while as a result of heat transfer between the water and the air in the room.
Option B is correct
What is Thermal equilibrium?
If there is no net transfer of thermal energy when two physical systems are connected by a heat-permeable route, then they are in thermal equilibrium. Thermal equilibrium is in accordance with the first law of thermodynamics.
When a system's internal temperature is both uniformly distributed and stable over time, it is considered to be in thermal equilibrium with itself. Systems that are in thermal equilibrium are always in systems that are in thermodynamic equilibrium, while the reverse is not always true.
The two systems may reach thermal equilibrium without achieving thermodynamic equilibrium if the connection between them allows the transfer of energy as a "change in internal energy" but not the transfer of matter or energy as work.
Learn more about thermal equilibrium:
brainly.com/question/14556352
#SPJ4