What is the first significant figure of the number. 0084?

No, the investigator would not be able to survive visiting 300 km from the center of the collapsed sun. According to Newton's Law of Gravitation, the gravitational force experienced by a 1.0-kg mass is given by the equation F = GMm by r2, where G is the gravitational constant, M is the mass of the black hole, m is the mass of the investigator, and r is the distance between them.

If the investigator is at a distance of 3 km from the center, the force experienced by the 1.0-kg mass at their head is GMm by 32. If the investigator is at a distance of 300 km from the center, the force experienced by the 1.0-kg mass at their feet is GMm by 3002, which is much greater than the force experienced at the head. Thus, the difference in gravitational attraction experienced by the investigator is too great for them to survive at a distance of 300 km from the center.

Know more about Newton's Law of Gravitation

https://brainly.com/question/9373839

#SPJ11

The combination of high velocity, kinetic energy, hardness, and irregularity of the sand particles make sand blasting an effective method for cleaning and preparing surfaces, including concrete.

How does the collective force of thousands of small and light grains of sand hitting a surface at high velocity create a powerful abrasive action that effectively removes dirt, grime, paint, rust, and other unwanted materials from the surface when using a sand blaster?

A sand blaster uses compressed air to force a stream of abrasive particles, such as sand, onto a surface to clean or prepare it for painting or other treatments.

Although each grain of sand is small and light, the collective force of thousands of grains of sand hitting the surface at high velocity creates a powerful abrasive action that can effectively remove dirt, grime, paint, rust, and other unwanted materials from the surface.

The sand particles have kinetic energy due to their high velocity, which allows them to physically abrade and remove the unwanted materials from the surface. Additionally, the sand particles are typically harder than the surface being cleaned, which allows them to scratch away the surface layer of the material and expose a fresh, clean layer underneath. This process is known as mechanical abrasion.

Moreover, the sand particles used in sand blasting are often of irregular shapes and sizes, which allows them to reach crevices and corners that may be difficult to clean with other methods.

To learn more about velocity follow the given link: https://brainly.com/question/20432894

#SPJ1

The dimension of a physical quantity is the power to which the fundamental units must be raised to, to represent it. Mass, length, time, temperature, electric current, luminous intensity and amount of substance are the fundamental quantities

Temperature is a measure of the degree of hotness or coldness of an object or substance. It is a fundamental concept in physics, chemistry, and engineering and is one of the most commonly measured physical parameters in scientific and industrial applications. The temperature of an object or substance is related to the average kinetic energy of its particles. In other words, the faster the particles are moving, the higher the temperature.  

Temperature is measured using a variety of devices, including thermometers, thermocouples, and pyrometers. The most common unit of temperature is the Celsius (°C) scale, which is based on the freezing and boiling points of water. Another commonly used scale is the Fahrenheit (°F) scale, which is used primarily in the United States.

To learn more about Temperature visit here:

brainly.com/question/11464844

#SPJ4

The angular acceleration of the car wheel is 7.0 rad/s².

We can relate the linear acceleration a and the angular acceleration α of a rotating object through the equation:

a = rα

where r is the radius of the rotating object. In this case, the radius of the car wheel is 0.25 m and the linear acceleration is 1.75 m/s². Substituting these values into the equation:

1.75 m/s² = (0.25 m) α

Solving for α:

α = 1.75 m/s² / 0.25 m = 7.0 rad/s²

Therefore, the angular acceleration of the car wheel is 7.0 rad/s².

Learn more on angular acceleration here:

#SPJ1

Answer:

b

Explanation:

ik

Answer:

To find the time, we can use the formula:

time = distance ÷ speed

In this case, the distance is 1,765 meters and the speed is 441.25 meters per minute (not per day, as stated in the question). We need to convert the speed to minutes per lap:

441.25 meters/min = 7.3542 meters/sec

1 lap = 1765 meters

Now we can calculate the time:

time = 1765 meters ÷ 7.3542 meters/sec

time ≈ 240.11 seconds

Therefore, it took the runner approximately 240.11 seconds, or 4 minutes and 0.11 seconds, to complete one lap around the track at an average speed of 441.25 meters per minute.

Explanation:

The force that holds the spring stretched at the same distance (14) is 25.76 N.

The work done in stretching a spring from its natural length to 14 beyond its natural length = W = 180 J

The stretch distance is = x = 14

Work done in stretching a spring = (1/2) k x² Where,

W = work done in stretching a spring

k = spring constant

x = distance stretched from its natural length

Therefore, the formula for finding the spring constant k is: k = (2W) / x²

From the given data, Work done = W = 180 J

Stretch distance = x = 14

Therefore, the spring constant k is: k = (2W) / x²= (2 × 180 J) / (14)²= (2 × 180) / 196= 360 / 196= 1.84 N/m

The force that holds the spring stretched at the same distance (14) is given by the formula: F = k x Where,

k = spring constant

x = stretch distance

Therefore, F = k x= 1.84 N/m × 14= 25.76 N

Therefore, the force that holds the spring stretched at the same distance (14) is 25.76 N.

To know about spring, refer here:

https://brainly.com/question/14670501#

#SPJ11

The total flow of electricity from the source is equivalent to the sum of the currents through each path. To calculate the total impedance in a parallel circuit, use the method below : 1/Rt Equals 1/R1 + 1/R2 + 1/R3 +...

IT = VT/RT or I total = V total / R total or the total current = the total voltage / the total resistance.

Current still flows along the other routes even if one of the parallel ones is blocked.

R_total = R1 + R2 +... + Rn The sum of all individual resistances makes up the system's overall resistance. Take the example issue below as an

example. A resistor with a 100 ohm electrical resistance value is linked to a resistor with a 200 ohm electrical resistance value.

To learn more about resistance, visit -

https://brainly.com/question/28135236

#SPJ1

Explanation:

This is because the oil is an unsaturated fat (liquid at room temperature) and when heated to such high temperature becomes saturated.

The rope will hit the ground in about 4.37 seconds.

With the help of the kinematic equation, we can resolve this issue:

[tex]d = vit + 1/2at^2[/tex]

where:

d = 50 m (distance or height of the cliff)

vi = 10 m/s (initial velocity)

a = [tex]9.8 m/s^2[/tex] (acceleration due to gravity, pointing downwards)

t = ? (time to hit the ground)

Solving for t:

[tex]50 = 10t + 1/2(9.8)t^2[/tex]

[tex]0 = 4.9t^2 + 10t - 50[/tex]

[tex]t = (-10+ \sqrt{(10^2 - 4(4.9)(-50))) / (2(4.9)} )[/tex]

[tex]t = 4.37 s[/tex]

Therefore, the rope will hit the ground in about 4.37 seconds.

for such more question on kinematic equation

https://brainly.com/question/24458315

#SPJ4

The gases that make up the planet's atmosphere are mixed together.Nitrogen, oxygen, & carbon dioxide are among the atmospheric gases.The water cycle & weather depend on the atmosphere, which also sustains life.

The atmosphere of the earth shields its people by absorbing dangerous sun rays and preserving a constant temperature.It protects Earth from many space hazards and enables life there.As a result, it is crucial for regulating climate and a source of life on planet.

Approximately 78% of the air of Earth's atmosphere is nitrogen, while 21% is oxygen.In trace proportions, additional gases like carbon dioxide, neon, & hydrogen are also present in air.

To know more about planet's atmosphere visit:

https://brainly.com/question/28871259

#SPJ1

Answer:

1. The number of valence electrons that an atom has dictates its ability to react chemically. The closer an atom is to achieving a full outermost shell, the more likely it will be to borrow electrons. Atoms are paired in a way that allows both to achieve a full stable outermost shell. For example, one atom of silicon has 14 electrons, four of which are valence electrons in the outermost shell. Silicon can lend, share, or gain four electrons to achieve a full outermost shell.

2.

a. Law of conservation of energy

b. Law of definite proportions

c. Law of conservation of matter

3. Mendeleev first published a table of elements arranged according to increasing atomic masses. He noticed that some elements near each other had differing properties, but elements in vertical columns had similar properties. Moseley then rearranged the table according to atomic numbers and this eliminated the discrepancies found in Mendeleev’s attempt. Today’s version of the periodic table displays elements in order based on their atomic number; the atomic number indicates the number of protons within the atoms of a particular element. Rows are called periods and columns are called groups. Elements in the same group have similar properties. Elements are grouped into nine categories: noble gases, halogens, nonmetals, alkali metals, alkaline earth metals, transition metals, other metals, metalloids, and rare earth elements.

                     ( VIEW ATTACHMENT FOR 4, 5, AND 6.)

7. Water is colorless, odorless, and tasteless. It's the chief substance of living material. It has a specific gravity of 1.0 at 4° Celsius. It freezes at 0° Celsius and boils at 100° Celsius. Water is a powerful solvent. Distillation is needed to remove impurities. Purification methods include

Aeration (water is sprayed into the air so that light and oxygen can kill bacteria)

Filtration (water is passed through a filter to remove impurities)

Chlorination (chlorine is added to water to destroy bacteria)

Coagulation (chemicals are added to water to cause organic matter with bacteria to settle out)

8. Air contains nitrogen (78%), oxygen (21%), carbon dioxide (0.04%), and rare gases (less than 1%). It also contains water, dust, bacteria, and other materials.

The atmosphere supports life via two cycles. In the carbon dioxide cycle, carbon dioxide is taken in by plants and used in photosynthesis. From here, oxygen is released to the atmosphere and taken in by animals; it fuels combustion and is needed for fermentation and decay. These processes convert it back to carbon dioxide.

In the nitrogen cycle, nitrogen is fixed by bacteria in the soil into usable nitrogen compounds absorbed by plants. Plants use these to form proteins, which are used as food by animals. Decaying plants and animal wastes return the nitrogen to the soil and ammonia to air. Without atmospheric nitrogen, rust and decay of living material would happen more quickly.

The magnitude of the net torque acting on the cylinder about the rotation axis is 8.73 Nm.

τ1 = F1 * r1

where F1 is the force on the drum, and r1 is the radius of the drum. Substituting the given values:

τ1 = 3.34 N * 1.39 m = 4.64 Nm

The torque due to the force on the core is given by:

τ2 = F2 * r2

where F2 is the force on the core, and r2 is the radius of the core. Substituting the given values:

τ2 = 8.52 N * 0.48 m = 4.09 Nm

The net torque is the sum of the two torques:

τnet = τ1 + τ2

τnet = 4.64 Nm + 4.09 Nm = 8.73 Nm

Magnitude is a term used in physics to describe the size or amount of a physical quantity, such as length, mass, force, or energy. It is often represented by a numerical value and a unit of measurement. In physics, the magnitude of a vector is the length of the vector, and it is a scalar quantity. For example, the magnitude of the force acting on an object is the amount of force, irrespective of its direction.

Magnitude is also used to describe the intensity of phenomena such as earthquakes, sound waves, and light waves. The Richter scale, for example, is a measure of the magnitude of an earthquake, while the decibel scale is used to measure the magnitude of sound waves. In summary, magnitude is an important concept in physics that allows us to quantify the size or amount of physical quantities and phenomena.

To learn more about Magnitude visit here:

brainly.com/question/29766788

#SPJ4

The correct option is C, the following statements concerning electrostatic situations is false of The electric field is never perpendicular to equipotential surfaces.

Equipotential surfaces are imaginary surfaces in space where every point on the surface has the same electrical potential or voltage. In other words, these surfaces represent points in space where the electric potential is constant.

Equipotential surfaces are important in the study of electric fields because the direction of the electric field is always perpendicular to the equipotential surfaces. This means that the electric field lines must cross the equipotential surfaces at right angles. The spacing between equipotential surfaces also gives an indication of the strength of the electric field - the closer the surfaces, the stronger the field. The electric field created by the charge will have a certain strength and direction at every point in space.

To learn more about Equipotential surfaces visit here:

brainly.com/question/14908372

#SPJ4

Answer:

a. The potential difference between two parallel charged plates can be calculated using the formula V = Ed, where V is the potential difference, E is the electric field strength between the plates, and d is the distance between the plates. In this case, the distance between the plates is 4.0 cm or 0.04 m and the electric field strength is 750 V/m. Plugging these values into the formula gives V = 750 V/m * 0.04 m = 30 V. So, the potential difference between the two parallel charged plates is 30 V.

b. The work done to move a charge between two points in an electric field can be calculated using the formula W = qV, where W is the work done, q is the charge being moved, and V is the potential difference between the two points. In this case, the charge being moved is +7.0 mC or 0.007 C and the potential difference between the positive and negative plates is 30 V (calculated in part a). Plugging these values into the formula gives W = 0.007 C * 30 V = 0.21 J. So, it would take 0.21 joules of work to move a +7.0 mC charge from the positive plate to the negative plate.

The ball will reach a height of 1.17 meters before slowing down to Vi = 2.4 m/s

First, we can use the equation for the final velocity of an object under constant acceleration:

v_f^2 = v_i^2 + 2ah

When the ball is thrown upwards, it experiences a constant downward acceleration due to gravity, so we can take a = -9.8 m/s^2.

At the maximum height, the final velocity of the ball will be zero, so we can set v_f = 0 and solve for h:

0 = (4.8 m/s)^2 + 2(-9.8 m/s^2)h

h = [(4.8 m/s)^2]/[2(9.8 m/s^2)] = 1.17 m

So the ball reaches a maximum height of 1.17 meters.

Next, we can use the same equation with v_i = 2.4 m/s and v_f = 0 to find the height where the ball reaches a velocity of 2.4 m/s on its way down:

0 = (2.4 m/s)^2 + 2(-9.8 m/s^2)h

h = [(2.4 m/s)^2]/[2(9.8 m/s^2)] = 0.29 m

Therefore, the ball reaches a maximum height of 1.17 meters and then falls to a height of 0.29 meters before reaching a velocity of 2.4 m/s.

More on kinematic motion can be found here: https://brainly.com/question/13671823

#SPJ1

Tthe radius from the center of the hoop at which a force of 2 N should be applied for 3 seconds in order to accelerate the hoop to angular speed of 10 rad/s is 0.25 m.

Given data:

Initial angular velocity ω1 = 5 rad/s

Final angular velocity ω2 = 10 rad/s

Force applied F = 2 N

Time taken t = 3 seconds

Moment of inertia I = 0.1 kg m²

Formula used: τ = Iα Where,τ = torque

I = moment of inertiaα = angular acceleration

Let's calculate the torque required to change the angular speed: Initial torque τ1 = Iω1

Final torque τ2 = Iω2

Change in torque Δτ = τ2 - τ1 = I(ω2 - ω1)

We know that τ = F × r where,

F is the force applied

r is the distance from the center of mass where the force is applied

Let's calculate the distance r: Δτ = τ = F × rr = Δτ / F = I(ω2 - ω1) / F

Substitute the values, r = 0.1 × (10 - 5) / 2 = 0.25 m

Therefore, the radius from the center of the hoop at which a force of 2 N should be applied for 3 seconds in order to accelerate the hoop to angular speed of 10 rad/s is 0.25 m.

To know about angular speed, refer here:

https://brainly.com/question/28439806#

#SPJ11

The correct answer to all questions about the defibrillator are: a) Q= 50 μC b) E= 125J c) I= 20A d) P= 50kW

A defibrillator is a device that is used to apply a strong electric shock to the chest in order to restart the heart in case of ventricular fibrillation.

The device contains a capacitor that is charged to a certain voltage and is then discharged through the patient's chest using electrodes called paddles.

a. The charge stored in the capacitor before it is discharged can be calculated using the formula Q = C * V, where Q is the charge in coulombs, C is the capacitance in farads, and V is the voltage in volts.

In this case, the capacitance is 10 μF or 10 * 10^-6 F, and the voltage is 5,000 V. Therefore, the charge stored in the capacitor is:

Q = 10 * 10^-6 F * 5,000 V = 50 * 10^-3 C = 50 μC

b. The energy released when the capacitor is discharged can be calculated using the formula E = 1/2 * C * V^2, where E is the energy in joules, C is the capacitance in farads, and V is the voltage in volts.

In this case, the capacitance is 10 uF or 10 * 10^-6 F, and the voltage is 5,000 V. Therefore, the energy released is:

E = 1/2 * 10 * 10^-6 F * (5,000 V)^2 = 125 J

c. The average current delivered by the defibrillator can be calculated using the formula I = Q / t, where I is the current in amperes, Q is the charge in coulombs, and t is the time in seconds.

In this case, the charge is 50 μC or 50 * 10^-3 C, and the time is 2.5 μs or 2.5 * 10^-3 s. Therefore, the average current delivered is:

I = 50 * 10^-3 C / 2.5 * 10^-3 s = 20 A

d. The average power delivered by the defibrillator can be calculated using the formula P = E / t, where P is the power in watts, E is the energy in joules, and t is the time in seconds.

In this case, the energy is 125 J, and the time is 2.5 μs or 2.5 * 10^-3 s. Therefore, the average power delivered is:

P = 125 J / 2.5 * 10^-3 s = 50,000 W or 50 kW

To know more about defibrillator, refer here:

https://brainly.com/question/30434883#

#SPJ11

The total amount of energy released, enables comparison of earthquakes more accurately. Thus, b. It makes use of seismograph data.

How the moment magnitude scale rates earthquakes?

The moment magnitude scale rates earthquakes by estimating the total energy released by an earthquake, based on data collected by a seismograph. It takes into account several factors, including the size of the fault that ruptured, the amount of movement that occurred, and the strength of the rocks involved.

The resulting magnitude value indicates the relative size or strength of the earthquake, and allows for more accurate comparison of earthquakes of different sizes. It does not directly determine the amount of damage caused by an earthquake, but a larger magnitude earthquake is generally capable of causing more damage than a smaller magnitude earthquake.

To learn more about earthquakes, visit: https://brainly.com/question/2916685

#SPJ1

The images below demonstrate how lake effect snow occurs:

Cold Arctic air is passing over warm lake waters.

The surface of the lake adds heat and water vapour to the cold air mass.

Water vapour condenses in rising air to form clouds.

Snow blankets the lake and the downwind shore.

Lake effect snow most commonly occurs in the Great Lakes region of North America, which includes parts of the United States and Canada. The Great Lakes generate significant amounts of moisture, and when cold air passes over the relatively warm water, it picks up moisture and heat, leading to the formation of clouds and precipitation. As the air moves over land, it can release large amounts of snowfall in areas downwind of the lakes. This phenomenon is most common during the winter months and can produce heavy snowfalls that can impact transportation, infrastructure, and daily life in affected areas.

To know more about precipitation, visit:

https://brainly.com/question/18109776

#SPJ1

A) The power delivered to the primary is 1111.1 kWB) The current in the primary is 308.6 A.C) The current in the secondary is 9258 A.

We can use the formula for power to solve this problem: Power = Voltage x Current x Efficiency, where efficiency is a decimal between 0 and 1.

(a) The power delivered to the primary can be found by dividing the power delivered to the secondary by the efficiency of the transformer:

Power_primary = Power_secondary / Efficiency

Power_secondary is the power delivered to the factory, which is 1000 kW.

Efficiency is given as 90%, or 0.9.

Power_primary = 1000 kW / 0.9 = 1111.1 kW

Therefore, the power delivered to the primary is 1111.1 kW.

(b) To find the current in the primary, we can use the formula for power again:

Power_primary = Voltage_primary x Current_primary

We know that the voltage on the primary side is 3600 V. Rearranging the formula, we get:

Current_primary = Power_primary / Voltage_primary

Current_primary = 1111.1 kW / 3600 V = 308.6 A

Therefore, the current in the primary is 308.6 A.

(c) To find the current in the secondary, we can use the turns ratio of the transformer:

Turns_ratio = Voltage_primary / Voltage_secondary

We know that the voltage on the secondary side is 120 V, and the turns ratio is:

Turns_ratio = 3600 V / 120 V = 30

The turns ratio tells us that the secondary voltage is 1/30th of the primary voltage, and the current on the secondary side is 30 times greater than the current on the primary side.

Therefore, the current in the secondary is:

Current_secondary = Current_primary x Turns_ratio

Current_secondary = 308.6 A x 30 = 9258 A

Therefore, the current in the secondary is 9258 A.

Learn more about power delivered here:

https://brainly.com/question/15044602

#SPJ11

The correct answer is 4. In a binary system, the more massive star should be more evolved than its companion.

In the case of Algol, the 0.8 m sun subgiant is more evolved than the 3.7 m sun main-sequence star, which is surprising and not what we would expect based on our understanding of stellar evolution. This discrepancy is believed to be due to the fact that the two stars did not form together as a binary system, but rather the less massive star was captured by the more massive star after it had already evolved off the main sequence.  The more massive star evolves more quickly and will reach later stages of evolution (such as a red giant phase) before the less massive star

Learn more about the star:

https://brainly.com/question/30287384

#SPJ11

The condition of the atmosphere at any given place and time depends on a variety of factors, such as air temperature, air pressure, wind speed and direction, humidity, precipitation, and cloud cover.

Air temperature can influence wind speed and direction, humidity, and cloud cover. Air pressure can impact wind speed and direction, and can create large-scale weather patterns. Wind speed and direction can determine the location of rain or snow, and also affect the temperature. Humidity influences air temperature, as well as precipitation and cloud cover. Precipitation can determine the amount of moisture in the atmosphere, and can be affected by the temperature and humidity of the air. Cloud cover affects the amount of solar radiation that reaches the surface, and can be determined by the temperature and humidity of the atmosphere.
In conclusion, the condition of the atmosphere at any given place and time depends on the interaction of several different factors. Air temperature, air pressure, wind speed and direction, humidity, precipitation, and cloud cover all interact to form the atmospheric conditions in any particular place and time.

For such more questions on condition of the atmosphere :

brainly.com/question/1526309

#SPJ11

The-ratio of their gravitational potential energy is [tex]1:2[/tex]. The unit of measurement for any and all types of energy, which would include kinetic and potential energy, is kilograms per square second, or kg*m2/s2 (J).

Height [tex]H_{1} = h[/tex]

Height [tex]F_{2} = 2h[/tex]

Mass of body 1 = m

Mass of body 2 = m

Gravitational potential energy of body  [tex]1 = mgH 1 =mgh[/tex]

Gravitational potential energy of Body 2 [tex]= mgH 2 =mg(2h)[/tex].

Ratio of gravitational potential energies

[tex]=\frac{mgh}{mg (2h)} =\frac{mgh}{2mgh} =\frac{1}{2} = 1:2[/tex]

What Unit of Measurement Is Potential Energy in?

Due to the fact that energy and work quantify identical types of force, the Joule is indeed the proven scientific measurement device for either of those.

How do you calculate kinetic energy?

K E = 1 2 m v 2 is the formula for kinetic energy. When m denotes the body's weight as well as v denotes its velocity, KE stands for kinetic energy.

To know more about kinetic click here

brainly.com/question/26472013

#SPJ4

The light bulb must burn for approximately 46.2 minutes to use the same amount of energy as the car lost during its deceleration.

Consider a 5,000-pound vehicle at 35 mph to illustrate energy loss in an automobile. When the automobile stops, its kinetic energy is transformed into heat and sound, resulting in a large energy loss. We use a 100-Watt light bulb to understand this loss.

The car's initial kinetic energy is [tex]KE = 0.5 * mass * velocity^2[/tex]. Next, we calculate 100-Watt light bulb energy usage per second. Finally, we divide the automobile's kinetic energy by the light bulb's energy consumption per second to determine the time needed for the light bulb to use the same amount of energy as the car.

The light bulb must burn for 46.2 minutes to utilise as much energy as the automobile lost during deceleration. This striking depiction illustrates the significant energy waste required in halting a moving automobile and emphasises energy conservation and efficient transportation systems.

Learn more about energy, here:

https://brainly.com/question/32906147

#SPJ12

Option D: -2 m/s² west is an example of acceleration.

Acceleration is the rate of change of velocity with respect to time. It is a vector quantity and can be positive or negative depending on the direction of the change in velocity.

Option D is an example of acceleration because it includes both the magnitude (-2 m/s²) and direction (west) of the change in velocity. The negative sign indicates that the velocity is decreasing, and the direction (west) indicates the direction of the change in velocity.

Learn more about acceleration here:

https://brainly.com/question/12550364

#SPJ1

the correct option is b. The large cube of concrete exerts a larger force on the small squishy ball.

It tends to be described as a connection that influences an article's movement on the off chance that there is no resistance. The straightforward meaning of force, then again, is the push or pull that any article gets. Force is a vector amount, consequently, it has a magnitude and a bearing.

Nonetheless, gravity is a force in a more broad sense since it represents the connection that happens when two masses are near each other. Gravitational effects are on a very basic level brought about by the extension of spacetime and the movement of things through the extended spacetime. The impact, by and by, is by all accounts the consequence of utilizing force.

to know more about force click here:

https://brainly.com/question/13191643

#SPJ4

the complete question is:

1) A small squishy ball is thrown against the side of a large cube of concrete. While the objects are in contact with each other, which experiences the larger force? a. The small squishy ball exerts a larger force on the large cube of concrete b. The large cube of concrete exerts a larger force on the small squishy ball C. Neither object exerts a force on the other while they are in contact. d. The small squishy ball and the large cube of concrete exert equal force on each other.

Answer:

The cone contains no charge.

Flux in = Flux out

Flux In = π R^2 E A = 471 N/C m^2

The acceleration vector of the club head point straight down(a)

Acceleration is a vector, and it may have a direction other than the acceleration of gravity.

The club head accelerates due to the forces exerted by the golfer, which include a torque applied by the golfer's hands, which generates angular acceleration that causes the club to rotate.

The acceleration vector points down because the club head is still at the beginning of the downswing.

As the club head approaches the ball, it begins to move away from its initial position and pick up velocity, resulting in a more complicated acceleration profile.

To summarise, during the downswing, halfway through the swing, the acceleration vector of the golf club head points straight down.

To know more about Acceleration:https://brainly.com/question/460763

#SPJ11

The weight of the astronaut on the newly discovered planet is approximately 1800N, which is option D.

The weight of an object is given by the formula W=mg, where g is the gravitational acceleration and m is the mass of the object. The gravitational acceleration on the surface of a planet can be calculated using the formula [tex]g = GM/R^2[/tex], where M is the mass of the planet, R is its radius, and G is the gravitational constant.

In this case, we are given that the planet has density 2/3 ρᴇ and radius 2Rᴇ. The mass of the planet can be calculated using the formula M = (4/3)π[tex]R^3[/tex]ρ, where ρ is the density of the planet. Substituting the given values, we get:

M = (4/3)π(2Rᴇ[tex])^3[/tex](2/3ρᴇ) = (32/27)πρᴇRᴇ[tex])^3[/tex]

The gravitational acceleration on the surface of the planet can be calculated as:

g = GM/R^2 = G[(32/27)πρᴇRᴇ^3]/(2Rᴇ[tex])^2[/tex] = (4/3)Gπρᴇ

The weight of the astronaut on the planet can be calculated as:

W = mg = 60[(4/3)Gπρᴇ] = (80/3)Gπρᴇ

Substituting the value of G and ρᴇ, we get:

W = (80/3)([tex]6.67 * 10^-^1^1[/tex])([tex]5.5 * 10^3[/tex])π ≈ 1818.9 N

To know more about acceleration visit:-

brainly.com/question/12550364

#SPJ1

Therefore, the ideal mechanical advantage of the wheel and axle system in this automobile is 3.

In physics, force is defined as any influence that causes an object to undergo a change in motion, either by changing its speed, direction, or shape. It is a vector quantity, meaning that it has both magnitude (a numerical value) and direction. Forces can be classified into different types, including contact forces (such as friction, tension, and normal forces) and non-contact forces (such as gravitational, electric, and magnetic forces). The net force acting on an object determines its acceleration, which is described by Newton's second law of motion: F = ma, where F is the net force, m is the mass of the object, and a is the acceleration.

Here,

The ideal mechanical advantage (IMA) of a wheel and axle system can be calculated using the following formula:

IMA = radius of wheel / radius of axle

In this case, the radius of the wheel is 30.0 cm and the radius of the axle is 10.0 cm. Substituting these values into the formula, we get:

IMA = 30.0 cm / 10.0 cm = 3

To know more about force,

https://brainly.com/question/29044739

#SPJ1