What is the difference between residential, commercial, and industrial air conditioning applications?.

Answers

Answer 1

The differences between commercial and residential applications include;

(1) Size difference

(2) Location

(3) Complexity

(4) Drainage

(5) Mechanism

(6) Equipment

(7) Cost

(8) Maintenance skill

How are residential and commercial air-conditioning different?

The difference between residential and commercial air-conditioning are;

1. Size difference

The difference in size of the area being cooled or heated, leads to the following;

Difference in components such as condensers, thermostat, fans

Difference in power need

Difference in unit size

2. Location of the air-conditioning system;

Residential air-conditioning units are located beside the house or building

Commercial systems are located in the roof or in swamp coolers.

Advantage of locating the commercial air-conditioners in the roof includes

Saving of space at the location

Reduction of noise pollution

Non disruptive maintenance

3. Complexity;

Commercial air-conditioning systems are more complex than residential due to the requirement for the consideration of the following;

Number of people

Size or space being serviced

Type of use (Constant or periodic)

4. Drainage required;

Larger and complex drainage system

5. System mechanism;

Modular system design The larger sizes of the commercial air-conditioning leeds to difference in installation method ( modular or direct)The location of parts within the same location in modules

6. Equipment used;

The difference in the range of humidity and temperature in the residential and commercial applications creates different equipment requirements

7. Cost

Commercial air-conditioning is more costly to purchase, install and maintain than residential air-conditioners.

8. Maintenance skill required

The skill requirement difference between residential and commercial applications lead to the demand of skilled practitioners in the industry.

Learn more about HVAC systems here:

https://brainly.com/question/14852309

#SPJ1


Related Questions

2. Describe how these variables will be affected by the use of flaps.
a. Lift
b. Drag
c. Takeoff airspeed
d. Takeoff distance
e. Wing camber ​

Answers

The flap is used to lift the aircraft in the air as it provides them with balance.

What are flaps?

The flaps' main function is to produce additional pull during decreased airspeed, therefore allowing the aircraft to fly at much low rpm with a reduced chance of crashing.

The flap is used to lift the aircraft in the air as it provides them with balance.

They are used for dragging the aircraft as it provides them with a certain amount of height with increases and lowers it.

The takeoff speed is slowed so relatedly to the flap as the change in the structure for the dynamic effect of the airspeed.

Flap reduces the takeoff distance as a smaller speed is being created, which reduces the feed with the coefficient of lift.

The class have a chamber it provides some hollow stairs through which they can store the good and services also it is sometimes used for oil storage.

Learn more about flaps, here:

https://brainly.com/question/17853240

#SPJ1

2. Describe one example of something that might be a need for you but a want for
someone else.

Answers

Answer:

1: water food or shelter

I don’t know where did the prerson come from?

Answers

Answer:

I am from Nepal where are you from

I’m from the United States

A shaft of a circular cross section is supported by two housings at B and C. The shaft
is subjected to static loads: concentrated force N applied by gear D and an applied torque T. The yielding strength of the shaft is Sy, and the diameter of the shaft is d. For circular cross sections, | = nd*/64, J = md*/32. The length of the shaft is L. Transverse shear stress is ignored here.

1) Draw the bending moment diagram of the shaft. Specify the location of the weakest (most dangerous) cross section A on bending moment diagram.

2) Draw the weakest point(s) on cross section A.

3) Determine the von-Mises stress at the weakest point(s).

4) Determine the factor of safety n based on Distortion Energy Theory.

Answers

Answer:

1) The bending moment diagram of the shaft is shown in Figure 1. The weakest cross section A is located at the point where the bending moment is maximum.

2) The weakest point on cross section A is located at the point where the bending moment is maximum.

3) The von-Mises stress at the weakest point is given by:

σ = M/I

where M is the bending moment and I is the moment of inertia of the cross section.

4) The factor of safety n is given by:

n = Sy/σ

where Sy is the yield strength of the shaft and σ is the von-Mises stress at the weakest point.

Explanation:

Hope this helps!

what is a lintel? question 7 options: upright beam beam used to span an opening a form of volcanic stone a type of marble

Answers

Answer: A lintel is a type of beam that spans openings such as portals, doors, windows and fireplaces. It can be a decorative architectural element, or a combined ornamented structural item

To create a tempered metal, heat the metal to a specific temperature and then cool it.

Answers

The process of creating a tempered metal by heating it to a specific temperature and then cooling it is known as Annealing.

How metal is tempered?

In metallurgy, Metal is tempered by a process that significantly improves the characteristics of metal by heating it to a high temperature, though below the melting point, and then allowing it to cool, usually in the air.

According to the context of this question, the process of annealing remarkably involves heating steel to a particular temperature and then cooling it at a gradual and controlled rate. This process is often utilized in order to soften a metal for cold working.

Therefore, annealing is the process of creating a tempered metal by heating it to a specific temperature and then cooling it.

To learn more about tempering, refer to the link:

https://brainly.com/question/1411105

#SPJ1

Express (-75+j45) in Phasor form.​

Answers

Explanation:

Note that the working equation that converts a complex number from rectangular to phasor form is given by

a+bi=r 20

Hence, the equivalent in phasor form is 87.46<149.04°


[tex]V_{rms} = 20 < 60° V\\ I_{rms} = 2 < 23.1°A [/tex]

What is the complex power S?
(A) (1.9 + j24) VA
(B) (16.4 + j21.1) VA
(C) (7,8 - j16.5) VA
(D) (21.1 + j16.4) VA​

Answers

Explanation:

Now we change into rectangular form

=40 cos (36.9°) +j 40 sin (36.9°) VA

=31.9+J24VA

Hence, correct option (31.9 +j 24) VA

a threaded rod has 11 threads per inch how many threads are there in 16 inches of the rod

Answers

The number of threads in 16 inches of the rod is 176 threads

Calculation and Parameters

Given that:

1 threaded rod= 11 threads per inch

Therefore, to find the number of threads in 16 inches of the rod,

We would have to multiply and this is given below:

16 * 11= 176 threads

This answer is gotten because a threaded rod has 11 threads per inch and when there are 16 inches of rod, to find the number of inches, you would have to multiply the values together.

Read more about calculations here:

https://brainly.com/question/2005046

#SPJ1

How many grains are on the surface of the head of a pin? assume that the head of a pin is spherical with a 1-mm diameter and has an astm grain size of 10

Answers

Answer:

Given, diameter of pin head d = 1 mm = 1/25.4 = 0.0394 in Surface area of a pinhead, A = 4pr^2 =

Explanation:

eesh

A gas in a piston-cylinder device is compressed, and as a result its temperature rises. is this a heat or work energy interaction?

Answers

Answer::

It is a work interaction as the compression process moves the piston by an external force.

Explanation:

ech a says that brake shoe linings saturated with brake fluid from a leaky wheel cylinder can be cleaned with brake cleaner and reused as long as they aren’t worn out. tech b says that brake shoes should be replaced in axle sets. who is correct?

Answers

Based on the information provided, the technician who is correct is: B. Technician B.

What is a braking system?

A braking system can be defined as a mechanical system which comprises various components that are designed and developed to bring an automobile vehicle in motion to a stop, when applied by a driver.

How to diagnose a brake system?

In order for a technician to diagnose a brake system, the following symptoms should be adequately and appropriately checked and used by the technician:

NoisesSmellsAbnormal brake pedal movements.Improper braking action.

Based on the information provided, we can reasonably infer and logically deduce that the technician who is correct is Technician B because brake shoes are to be replaced in axle sets.

Read more on braking system here: https://brainly.com/question/24751467

#SPJ1

Complete Question:

Tech a says that brake shoe linings saturated with brake fluid from a leaky wheel cylinder can be cleaned with brake cleaner and reused as long as they aren’t worn out. tech b says that brake shoes should be replaced in axle sets. who is correct?

Technician A.

Technician B.

Neither Technician A nor Technician B

Both Technician A and Technician B

If a bearing needs 4. 0 s to solidify enough for impact, how high must the tower be?.

Answers

The height of the tower is equal to 78.4 meters.The bearing's impact velocity is equal to 39.2 m/s.

How to determine the height of the tower?

In order to determine the height of the tower, we would apply the second equation of motion and assume that the downward motion is negative.

Mathematically, the second equation of motion is given by this formula:

S = ut + ½gt²

Where:

S represents the distance or height.u represents the initial velocity.a represents the acceleration.t represents the time.

Substituting the given parameters into the formula, we have;

S = S₀ + ut - ½gt²

0 = S₀ + (0)4.0 - ½ × (9.8) × 4.0²

0 = S₀ - 4.9 × 16.0

Height, S₀ = 78.4 meters.

How to calculate the bearing's impact velocity?

In order to calculate the bearing's impact velocity, we would apply the first equation of motion:

V = u - at

V = 0 - 9.8(4.0)

Impact velocity, V = 39.2 m/s.

Read more on velocity here: https://brainly.com/question/19365526

#SPJ1

Complete Question:

Ball bearings can be made by letting spherical drops of molten metal fall inside a tall tower, called a shot tower, and solidify as they fall.

a. If a bearing needs 4.0 s to solidify enough for impact, how high must the tower be?

b. What is the bearing's impact velocity?

technician a says a defective pcv valve may cause rough idle operation. technician b says the pcv system depends upon a properly sealed engine to perform correctly. who is correct?

Answers

Technician A says a defective PCV valve may cause rough idle operation  is correct and so is  Tech B: So C)both A and B are correct.

What is the valve about?

If a PCV valve is known to be stuck open, then the PCV valve is one that can be said to be faulty.

Note that a faulty PCV valve can lead to more air going into the combustion chamber that can leads to lean air-fuel ratio.

Therefore, Technician A says a defective PCV valve may cause rough idle operation  is correct and so is  Tech B: So C)both A and B are correct.

Learn more about PCV valve from

https://brainly.com/question/23860109

#SPJ1

Technician A says a defective PCV valve may cause rough idle operation. Technician B says the PCV system depends upon a properly sealed engine to perform correctly. Who is correct?

A)A only

B)B only

C)both A and B

D)neither A nor B

A 13.2 KV circuit has a 10,000 kVA load with a 0.85 lagging power factor. How much capacitive reactive power (in KVAR) is needed to conect the P.F. to 0.97 lagging?

Answers

Explanation:

Solving for the capacitive reactive power, we have

Qc = 8,500 (tan(-cos (0.85)) - tan(-cos¹ (0.97)))

Qc = -3137.5261 = -3138 KVAR

Dropping an electrical appliance into water, making it a foreign conductor, causes a(n)?

Answers

Dropping an electrical appliance into water, making it a foreign conductor, causes a: D. short circuit.

What is conduction?

Conduction can be defined as a process which involves the transfer of electrical charge from one point to another in an electrical circuit, especially due to the movement of particles (electrons).

This ultimately implies that, when the conduction relates to electrical charge, it is referred to as electrical conduction.

In Electrical engineering, a short usually causes an electrical circuit protection device such as a fuse, circuit breaker, etc., to open when higher than normal current flows through the electrical circuit.

In this context, we can reasonably infer and logically deduce that a short circuit would occur when an electrical appliance is dropped into water.

Read more on short circuit here: brainly.com/question/25018411

#SPJ1

Complete Question:

Dropping An electrical appliance into water, making it a foreign conductor, causes a(n) A)overload. B)open circuit. C)closed circuit. D)short circuit.

Which is the engineering name of the complicated circuit board in EC circuits​

Answers

Which is the engineering name of the complicated circuit board in EC circuits?

A Printed Circuit Board (PCB) or a Printed Wired Board (PWB)

Answer:

PCB (Printed Circuit Board)

Explanation:

Construction:

Initially, this board is an insulator plate. A circuit diagram is clearly drawn by a computer and scanned.

This plate is put under a multipurpose printer and the circuit is printed onto the plate with conductive copper tiny plates and wires.

A warning placed in an installation manual for a piece of equipment indicates that the equipment must not be placed within 36 inches of flammable material. You need to know the value in centimeters​ (cm), and you know that one inch equals 2.54 cm. What is the allowable distance to flammable material in​ centimeters, to the nearest hundredth of a​ centimeter?

Answers

The allowable distance to flammable material in​ centimeters is equal to 91.44 cm.

What is a conversion factor?

A conversion factor can be defined as a number that is typically used to convert (change) a number in one (1) set of units to another, either by dividing or multiplying.

Generally speaking, an appropriate conversion factor to an equal value must be used when it is necessary to perform any mathematical conversion.

In order to calculate the allowable distance to flammable material in​ centimeters, we use the following conversion factor.

Conversion:

1 inch = 2.54 cm.

36 inches = X cm.

Cross-multiplying, we have:

X = 2.54 × 36

X = 91.44 cm.

Read more on conversion factor here: brainly.com/question/28308386

#SPJ1

Name two common fuel gases that can be used for oxyfuel cutting

Answers

Hi

Acetylene and propane

I hope this help you!

Which of the following helps support the implementation of software applications within a programming platform?
A. development tool
B. Visual Basic
C. parse
D. syntax

Answers

Answer:

A: development tool

Explanation:

Development tool helps support the implementation of software applications within a programming platform. Thus, the correct option for this question is A.

What do you mean by Software application?

A Software application may be defined as a kind of computer program that significantly performs or operates a specific personal, educational, and business function with respect to the requirement of an individual.

In this modern era of technology, programming platforms develop new trends and ideas that are efficient and beneficial to consumers. These programming platforms implement software applications with the help and support of developmental tools.

Therefore, the option that helps support the implementation of software applications within a programming platform is known as the development tool. Thus, the correct option for this question is A.

To learn more about Programming platforms, refer to the link:

https://brainly.com/question/28465460

#SPJ2

7. The dimensional volume contained in a standard full-size welding cylinder is blank cubic feet.
A. 5 to 10
B. 20 to 30
C. 100
D. 1.5 to 2

Answers

Answer:

I say C

Explanation:

It is okay to lift one end of the vehicle:
A) As long as two swing arms are being used
B) As long as the wheels have been chocked
C) As long as the swing arm restraints are engaged
D) None of the above

Answers

It is okay to lift one end of the vehicle B) As long as the wheels have been chocked.

What is a Safety Procedure?

This refers to the processes that are undertaken in order to undertake a task safely, both for the person executing the task and others around.

Hence, we can see that It is okay to lift one end of the vehicle B) As long as the wheels have been chocked

This is because it would enable the vehicle to be safely positioned so the wheels would not roll off and cause an accident.

This safety procedure allows a person to raise one end of a vehicle, if the wheels have been chocked, to keep them in place.

Read more about safety procedures here:

https://brainly.com/question/14367881

#SPJ1

Once the external shape and internal features of a part are represented by a combination of lines, further information is provided by ____.

Answers

Once the external shape and internal features of a part are represented by a combination of lines, further information is provided by Dimension.

What is  Shape Dimension?

In regards to geometry, the  three-dimensional shape is known to be one that can be said to be a form of solid figure or an object/shape that is of known to be made up of three dimensions which are length, width, and height.

Note that the three-dimensional shapes have height as well as thickness or depth.

Therefore, Once the external shape and internal features of a part are represented by a combination of lines, further information is provided by Dimension.

Learn more about Shape from

https://brainly.com/question/3701983
#SPJ1

An 80 uF capacitor is in series with a 9mH inductor. What is the total impedance at 60 Hz.?

(A) +j 36.55
(B) +j 29.77
(C) -j36.55
(D) -j29.77​

Answers

Explanation:

Solving for the reactance

The first step is to determine the reactance (in ohms) for the inductor and the capacitor.

Help me with this question thank you!

Answers

Explanation:

Fire doors are closed and paths are clear

mr. smith has allowed mrs. jones to run a sewer line through mr. smith's backyard so that mrs. jones has access to the city sewer system. this is an example of a(n):

Answers

Since Mr. Smith allowed Mrs. Jones to run a sewer line through Mr. Smith’s backyard so that Mrs. Jones has access to the city sewer system, this is an example of an: A. Easement.

What is an easement?

An easement can be defined as a contractual agreement between two or more parties, wherein an individual is granted an access to a real property (land) for a specific purpose and a specific amount of time without possessing it, in exchange for a fee.

This ultimately implies that, an easement refers to the right of a landowner to make use of another person's nearby real property (land) for a specific purpose and a specific amount of time.

Read more on easement here: https://brainly.com/question/22400838

#SPJ1

Complete Question:

Mr. Smith has allowed Mrs. Jones to run a sewer line through Mr. Smith’s backyard so that Mrs. Jones has access to the city sewer system. This is an example of a(n):

a. Easement

b. Encumberance

c. Estate for years

d. Title assurance

why is ongoing safety training important

Answers

Answer:

Keeps workers interested and motivated, helping reduce dangerous behavior and eliminate hazardous situations

Explanation:

Frequent hands-on training and practice drives home the message that safety is a critical part of any work site. Safety should always be a top concern for every company and organization.

a threaded rod has 11 threads per inch how many threads are there in 16 inches of the rod.

will give brainliest

Answers

Answer: 176 threads

Explanation:

11 threads : 1 inch

16 inches * 11 threads/1 inch=

16*11/1=

16*11=176 threads

11*16=175 threads. No problem

tech a says that black exhaust indicates a very rich-running engine. tech b says that white exhaust can indicate coolant in the exhaust. who is correct?

Answers

Since tech A says that black exhaust indicates a very rich-running engine is false and since tech b says that white exhaust can indicate coolant in the exhaust, Tech B  is correct.

What does it mean when your exhaust pipe is black?

Black exhaust smoke is known to be one that can show up if the vehicle is said to be burning too much fuel.

Note that this situation could be as a result of  a clogged air filter, the malfunctioning of the fuel injection system, a blocked manifold, or other forms of issues.

Therefore, Since tech A says that black exhaust indicates a very rich-running engine is false and since tech b says that white exhaust can indicate coolant in the exhaust, Tech B  is correct.

Learn more about exhaust from

https://brainly.com/question/12741044
#SPJ1

__________ is the classification of a building or structure into one of the five types or subtypes included in the model building codes, based on types of materials and structural protection afforded.

Answers

Construction Classification is the classification of a building or structure into one of the five types or subtypes included in the model building codes, based on types of materials and structural protection afforded.

What is a building?

A building can be defined as a structure which has a roof and a wall a building is a permanent structure which has a base and a very study materials which are being used to create a stable structure with a foundation.

Construction classification can be defined as type of building construction which is being legalized by the people. These the building reduces that quality damages also it provides a safe and sound structure with is often guarded.

Learn more about building, here:

https://brainly.com/question/6372674

#SPJ1

Other Questions
When mountain climbers purchase clothing for scaling mount everest, their purchases are primarily addressing __________ needs. Economic growth implies? a. opportunity costs are decreasing. b. you can only have more of one good by having less of another. c. you can now have more of all goods. d. fewer resources are available. Men over 45 and women over 55 should obtain ________ before beginning an exercise program find the interesection if possible: ( 1 , 6 ] [ 3 , 4 ] . express your answer in interval notation. marbled granite company files a suit against natural stone, inc., in a colorado court with general jurisdiction. in a delaware court with limited jurisdiction, e-sales corporation files a suit against first state bank. the difference between general and limited jurisdiction is PART A: How does Elizabeth's attitude towards Lady Catherine create humor in this excerpt?A.Elizabeth feigns respect and diffidence to the arrogant Lady Catherine, whom she doesnot respect, thus adding to the humor of the scene.B.Elizabeth acts deliberately elusive when questioned by Lady Catherine, who isunaccustomed to such behavior, thus adding to the humor of the scene.C.Elizabeth refuses to tell Lady Catherine the truth about her and Mr. Darcy, thuscreating misunderstanding between them and contributing to the comedy of thescene.D.Elizabeth is genuinely baffled about the rumor, as she rejected Mr. Darcy's proposal,but Lady Catherine does not believe her; this miscommunication thus adds to thecomedy. In the exercise, what additional research should the consulting team gather and analyze? A nurse is caring for a pregnant client who is in labor. which maternal physiologic responses should the nurse monitor for in the client as the client progresses through birth? The emergence of the american belief that anyone can be successful if they work hard enough developed during this time period. how did this thinking justify the development of a leisure class? in what ways was the perspective of this time period ignoring of reality? in what ways does this belief still prevail today and how does it guide modern policy and political thinking? (2ax2a)+(3bx3b)-(2x2ax3b) Explain how the speaker of "To His Coy Mistress* views women in general. In other words, what does the poem revealabout the time period and attitudes toward women at the time? Your answer should be at least 250 words. The valve between the left ventricle and the opening of the blood vessel attached to its is? What kind of economic systems might be found in aDictatorship/Totalitarianism?CHOOSE ALL THAT APPLYCapitalism/Free MarketSocialism/Mixed EconomyCommunism/Command EconomyTraditional/Barter System In 3-5 sentences. How is your understanding and attitude impacted when Beowulf's fight against Grendel isdescribed from Grendel's point of view? If the total net force on a system is zero, assuming the mass remains constant, which must be true? (1 point)O The acceleration is zero.O The velocity is increasing.O The velocity is decreasing.O The acceleration is increasing. when public relations people are called in after a major screw-up to clean up the mess, their role is mostly . 7) If a = 2, b = 3, c = 4, and d = 12, evaluate 6c-4b In what ways are roller coaster rides similar to and different from training simulations in a NASA plane? is 47.2 greater than 47.197? Answer the following questions about your goal, the political party or interest groupyou chose, and the form of media you selected. This section is worth 10 points.1. In two to three sentences, explain your goal and describe how you think it willaffect your area of concern. (4 points)