What is the density of a sample of argon gas at 60 ∘C and 858 mmHg ? What is the density of a sample of argon gas at 60 and 858 ? 1.65 g/L 16.50 g/L 9.16 g/L 1254.38 g/L

The structural isomer that would have an enantiomer is 2,5-dibromo-1-hexene.

In order for a compound to have an enantiomer, it must possess chiral centers, which are carbon atoms bonded to four different substituents. Chiral compounds exist as mirror images that cannot be superimposed on each other.

Among the given structural isomers, only 2,5-dibromo-1-hexene has a chiral center. The carbon atom in this isomer is bonded to four different substituents: two bromine atoms, a hydrogen atom, and a vinyl group. Due to the presence of a chiral center, 2,5-dibromo-1-hexene can exist as two enantiomers.

On the other hand, the other structural isomers listed (1,1-dibromo-1-hexene, 1,4-dibromocyclohexane, 4,4-dibromo-1-hexene, and 5,5-dibromo-1-hexene) do not possess chiral centers. The carbon atoms in these isomers are either bonded to identical substituents or have less than four different substituents. Consequently, these isomers do not have enantiomers because they lack chirality.

Learn more about Enantiomers here: https://brainly.com/question/13265194

#SPJ11

In order to complete this question, we need to analyze the energy diagram given for the reaction between CH4 and F2. The diagram shows the energy of the reactants, and we are asked to draw a horizontal line segment to indicate the energy of the products. From the diagram, it appears that the products have a lower energy level than the reactants, meaning that energy is released during the reaction.

To draw the horizontal line segment, we need to identify the energy level of the products. This can be found by looking at the lowest point on the diagram after the reaction progresses. From the diagram, it appears that the energy of the products is around -500 kJ/mol. Therefore, we can draw a horizontal line segment at this level to indicate the energy of the products.
The next step is to draw a vertical double-headed arrow (1) on the graph that corresponds to the value of AH for the reaction. AH represents the change in enthalpy during the reaction. It is equal to the difference between the energy of the products and the energy of the reactants.
From the diagram, we can see that the energy of the reactants is around -200 kJ/mol, while the energy of the products is around -500 kJ/mol. Therefore, AH can be calculated as follows:
AH = (-500 kJ/mol) - (-200 kJ/mol)
AH = -300 kJ/mol
We can now draw a vertical double-headed arrow (1) on the graph to indicate the value of AH. The arrow should start at the energy level of the reactants and end at the energy level of the products. Its length should correspond to the magnitude of AH, which is -300 kJ/mol.
Overall, the energy diagram shows that the reaction between CH4 and F2 is exothermic, meaning that energy is released during the reaction. The value of AH is negative, indicating that the reaction is also exothermic.

for more such questions on energy

https://brainly.com/question/19666326

#SPJ11

Note- The complete question is: Draw a labeled energy diagram for the reaction between methane (CH4) and fluorine (F2) below. The energy of the reactants is shown on the diagram. On the right side of the diagram, draw a horizontal line segment to indicate the energy of the products. Draw a vertical double-headed arrow (↕) on the graph that corresponds to the value of AH for the reaction.

Liquid chromatography separates compounds of different polarity by utilizing the differential interactions between the mobile phase (organic solvent) and the stationary phase (silica gel), based on their relative polarities.

Liquid chromatography is a technique used to separate and analyze compounds in a mixture. In this process, the mobile phase, which is an organic solvent, carries the sample through a stationary phase, typically composed of silica gel.

Silica gel, a polar material, contains surface functional groups such as silanol (-SiOH), which can interact with polar compounds through hydrogen bonding, dipole-dipole interactions, or other polar interactions.

When a mixture of compounds is introduced into the liquid chromatography system, the compounds will interact differently with the mobile and stationary phases based on their polarity. Compounds with higher polarity tend to have stronger interactions with the polar stationary phase, causing them to move more slowly through the column.

On the other hand, less polar compounds experience weaker interactions with the stationary phase and have a stronger affinity for the mobile phase. As a result, they elute faster through the column.

The differential interactions between the mobile and stationary phases based on compound polarity allow for the separation of the mixture. The compounds with higher polarity will be retained longer in the column, while less polar compounds will elute earlier.

By controlling the composition of the mobile phase, altering the solvent polarity, and adjusting other chromatographic parameters, it is possible to optimize the separation of compounds with varying polarities.

In summary, liquid chromatography separates compounds of different polarity by exploiting the differential interactions between the mobile phase (organic solvent) and the stationary phase (silica gel) based on their relative polarities. Compounds with higher polarity interact more strongly with the stationary phase and elute slower, while less polar compounds elute faster through the column.

To know more about liquid chromatorgraphy, visit,

https://brainly.com/question/28731153

#SPJ4

A non-reducing disaccharide is formed when a glycosidic bond occurs between two monosaccharides, both of which are in the ketose form. Specifically, a glycosidic bond between two ketose monosaccharides in the α-anomeric form would yield a non-reducing disaccharide.

In the α-anomeric form of a ketose, the anomeric carbon (the carbon involved in the glycosidic bond formation) is in the α configuration. The α configuration means that the hydroxyl group attached to the anomeric carbon is pointing downward. When two α-ketose monosaccharides are linked together through a glycosidic bond, the resulting disaccharide is non-reducing because the anomeric carbon of both monosaccharides is involved in the glycosidic bond and cannot undergo mutarotation.

In contrast, if the glycosidic bond occurs between a ketose and an aldose (such as a ketose and a glucose), or between a ketose and the reducing end of another carbohydrate molecule, the resulting disaccharide would be a reducing disaccharide because the anomeric carbon of the reducing monosaccharide can still undergo mutarotation and reduce other compounds.

Learn more about glycosidic bond here:

https://brainly.com/question/2161013

#SPJ11

There are approximately 5.86 x 10²² formula units of sodium perchlorate in 11.9 g of the compound. Sodium perchlorate is a white crystalline solid used in the manufacturing of other chemicals and in pyrotechnics. The formula units of a compound are the smallest whole-number ratio of atoms or ions in the compound.

The formula for sodium perchlorate is NaClO₄, which has a molar mass of 122.44 g/mol (22.99 g/mol for Na, 35.45 g/mol for Cl, and 4 x 16.00 g/mol for O).

To calculate the formula units in 11.9 g of sodium perchlorate, we need to convert the mass to moles using the molar mass and then multiply by Avogadro's number:

moles of NaClO₄ = mass / molar mass = 11.9 g / 122.44 g/mol = 0.0972 mol

formula units of NaClO₄ = moles of NaClO₄ x Avogadro's number = 0.0972 mol x 6.022 x 10²³/mol = 5.86 x 10²²

Therefore, there are approximately 5.86 x 10²² formula units of sodium perchlorate in 11.9 g of the compound.

Sodium perchlorate is a white crystalline solid that is highly soluble in water and is often used in the manufacturing of other chemicals, as well as in pyrotechnics. The formula units of a compound refer to the smallest whole-number ratio of atoms or ions in the compound.

Avogadro's number is a constant that represents the number of particles (atoms, molecules, or formula units) in one mole of a substance, which is approximately 6.022 x 10²³.

Learn more about: formula

brainly.com/question/20748250

#SPJ11

The methyl ester can be represented as follows:

CH3COOCH3

The Grignard reagent used in this reaction is ethylmagnesium bromide (C2H5MgBr). The structure of the Grignard reagent can be represented as follows:

Br

|

CH3CH2Mg-Br

The Grignard reagent is formed by the reaction of magnesium (Mg) with ethyl bromide (C2H5Br). The bromine atom (Br) is attached to the carbon atom bonded to the magnesium atom (Mg), and the ethyl group (C2H5) is attached to the carbon atom bonded to the bromine atom.

Learn more about methyl ester here:

https://brainly.com/question/29260742

#SPJ11

After 32 days, there would be approximately 14 μg of iodine-131 remaining in the preparation laboratory.

To determine how much iodine-131 is left after 32 days, we need to calculate the number of half-lives that have passed and use that information to calculate the remaining amount.

The half-life of iodine-131 is 8.0 days, which means that after each 8.0-day period, the amount of iodine-131 is reduced by half.

First, let's calculate the number of half-lives that have passed in 32 days:

Number of half-lives = (Time elapsed) / (Half-life)

Number of half-lives = 32 days / 8.0 days = 4

Since 4 half-lives have passed, the iodine-131 has been reduced by a factor of (1/2)^4 or 1/16.

Now, let's calculate the amount of iodine-131 remaining:

Remaining amount = Initial amount × (1/16)

Remaining amount = 224 μg × (1/16) = 14 μg

After 32 days, there would be approximately 14 μg of iodine-131 remaining in the preparation laboratory.

Learn more about iodine-131  here:

https://brainly.com/question/2064871

#SPJ11

UV gels are commonly used in the nail industry for artificial nail enhancements. The main ingredients in UV gels are typically oligomers, monomers, photo initiators, and pigments.

Oligomers are long-chain molecules that provide the bulk and strength to the gel. Monomers are smaller molecules that help the gel cure and harden under UV light. Photoinitiators are added to the gel to initiate the polymerization reaction when exposed to UV light. This reaction causes the gel to harden and bond to the natural nail or nail extension. Pigments are added to give the gel its color and opacity.

The chemistry of UV gels involves the process of polymerization, which is the bonding of monomers and oligomers through a chemical reaction. This reaction is triggered by the photoinitiators in the gel when exposed to UV light. As the reaction occurs, the gel becomes solid and adheres to the nail.

Overall, the chemistry and ingredients of UV gels allow for a durable and long-lasting nail enhancement that is popular in the beauty industry.

To know more about pigments refer here :

https://brainly.com/question/14354023

#SPJ11

For the global carbon cycle and the addition of extra CO₂ to the atmosphere, Le Chatelier's principle helps us anticipate the response of the carbon cycle.

Le Chatelier's principle states that when a system in equilibrium is subjected to a change in conditions, it will respond in a way that minimizes the impact of that change.

When additional CO₂ is added to the atmosphere, several processes within the carbon cycle can be influenced. Here are a few key responses:

1. Oceanic Dissolution: The oceans act as a carbon sink by absorbing CO₂ from the atmosphere. When more CO2 is present in the atmosphere, it increases the concentration gradient, leading to enhanced dissolution of CO₂ into the ocean. This can help reduce the impact of increased atmospheric CO₂ levels.

2. Photosynthesis: Increased CO₂ levels can stimulate photosynthesis in plants and algae. Through photosynthesis, these organisms absorb atmospheric CO₂ and convert it into organic carbon compounds, such as sugars. This process can act as a natural mechanism to mitigate the rise in CO₂ concentrations.

3. Carbonate Formation: The increased CO₂ in the atmosphere can result in higher levels of dissolved CO₂ in the ocean, leading to a decrease in pH (ocean acidification). This change in pH can impact the ability of marine organisms to form calcium carbonate shells or skeletons, affecting the overall carbonate balance in the oceans.

Learn more about Le Chatelier's principle here:

https://brainly.com/question/32161453

#SPJ4

The correct pairing of compounds where both members are strong electrolytes is:

D) NaBr and HBr

A strong electrolyte is a substance that completely dissociates into ions when dissolved in water, resulting in a high concentration of ions in the solution. Both NaBr (sodium bromide) and HBr (hydrobromic acid) are strong electrolytes.

In the case of NaBr, it dissociates into Na+ and Br- ions:

NaBr -> Na+ + Br-

HBr, being an acid, dissociates into H+ and Br- ions in water:

HBr -> H+ + Br-

Both NaBr and HBr produce a high concentration of ions when dissolved in water, making them strong electrolytes.

The other options, A) NaCN and KF, B) NH3 and HBr, and C) KBr and H2CO3, do not involve two strong electrolytes in the pairings.

Learn more about compounds  here:

https://brainly.com/question/14117795

#SPJ11

Methyl iodide (CH3I) is less soluble in hexane (C6H14) compared to ethanol (C2H5OH).

Solubility is determined by the strength and nature of intermolecular forces between the solvent and the solute. Hexane is a nonpolar solvent, and therefore, it dissolves nonpolar solutes such as hydrocarbons, whereas ethanol is a polar solvent and dissolves polar and ionic solutes.

Methyl iodide is a polar molecule, but its polarity is relatively weak due to the presence of the large iodine atom, which results in weaker dipole-dipole interactions. On the other hand, hexane has a nonpolar nature, and the weak dipole moment of CH3I is not sufficient to overcome the intermolecular forces present between hexane molecules.

Therefore, CH3I is less soluble in hexane. Ethanol, on the other hand, can form hydrogen bonds with the polar nature of CH3I, making it more soluble in ethanol than in hexane

Learn more about hexane, below:

https://brainly.com/question/30364285

#SPJ11

The reaction described is the transformation of two molecules of hydrogen chromate (H2CrO4) into one molecule of dichromate (Cr2O7^2-) and two molecules of water (H2O).

The correct statement for this reaction is:

The reaction involves the oxidation of hydrogen chromate to form dichromate.

In the process, two hydrogen chromate ions lose two protons (H+) and undergo a reduction in oxidation state, resulting in the formation of one dichromate ion.

Simultaneously, two water molecules are produced. The reaction is balanced in terms of charge and mass, with two hydrogen chromate ions on the reactant side transforming into one dichromate ion and two water molecules on the product side.

This transformation is a redox reaction, involving changes in both oxidation states and the transfer of electrons. The reaction can occur in an acidic medium where the hydrogen chromate acts as an oxidizing agent.

To know more about hydrogen chromate refer here

brainly.com/question/31111160#

#SPJ11

To determine the index of refraction of the liquid, we can use Snell's law, which relates the angles of incidence and refraction to the indices of refraction of the two media involved.

Snell's law is given by:n1 * sin(theta1) = n2 * sin(theta2), Where:

n1 is the index of refraction of the first medium (in this case, air).

theta1 is the angle of incidence (the angle between the incident ray and the normal to the surface).

n2 is the index of refraction of the second medium (the liquid in this case).

theta2 is the angle of refraction (the angle between the refracted ray and the normal to the surface).

we are given the critical angle, which is the angle of incidence that results in an angle of refraction of 90 degrees (the refracted ray travels along the boundary of the two media). For a critical angle, sin(theta2) = 1.

So we have:

n1 * sin(theta1) = n2 * 1

Since sin(theta1) = sin(90 - theta1) = cos(theta1), we can rewrite the equation as:

n1 * cos(theta1) = n2

Substituting the values given, where the critical angle is 49.6 degrees:

n2 = 1 / cos(49.6)

Calculating this value, we find:

n2 ≈ 1.395

Therefore, the index of refraction of the liquid is approximately 1.395.

Learn more about Snell’s law here ;

https://brainly.com/question/8757345

#SPJ11

The electron structure of the "i-" ion, which refers to the iodide ion (I-), is identical to the electron structure of the inert gas Xenon (Xe).

The iodide ion has gained one extra electron compared to a neutral iodine atom (I), resulting in a filled valence shell with the same electron configuration as Xenon. The noble gases, including Xenon, have completely filled electron shells, making them stable and unreactive under normal conditions.

Know more about Xenon here:

https://brainly.com/question/5516586

#SPJ11

Below are the answers for the three options. The struture of orlistat, chiral centers in the molecule and the mechanistic explanation for the observation is given below.

a) The structure of orlistat (36) is as follows:

    H       H                H

    |       |                |

H - C - O - C - C - C - C - C - C - C - O - H

    |   ||    ||  |       |

H - C - N - C - C - C - C - C - C - C - O - H

    |   ||    ||  |       |

    H   O     O   O       H

b) Orlistat (36) has four chiral centers. The chiral centers are indicated by an asterisk (*) below:

    H       H                H

    |       |                |

H - C - O - C - C - C - C - C - C - C - O - H

    |   ||    ||  |       |

H - C - N - C - C - C - C - C - C - C - O - H

    |   ||    ||  |       |

    H*  O*    O   O       H

c) The loss of lipase inhibitory activity of orlistat when stored overnight at pH=12 can be attributed to hydrolysis. At high pH, the hydroxide ions (OH-) present in the solution can react with the ester functional group (-COO-) in orlistat through a nucleophilic attack, leading to the cleavage of the ester bond.

This hydrolysis reaction results in the breakdown of orlistat into its constituent parts and loss of its inhibitory activity.

The hydrolysis of orlistat occurs because the high pH conditions provide an environment where hydroxide ions are abundant and highly reactive. The nucleophilic attack of OH- on the ester bond breaks it, resulting in the formation of the corresponding alcohol and carboxylate.

As a result, orlistat loses its original structure and, consequently, its lipase inhibitory activity.

In summary, the observed loss of lipase inhibitory activity of orlistat stored overnight at pH=12 is due to the hydrolysis of the ester bond in orlistat caused by the presence of hydroxide ions in the alkaline solution.

Learn more about carboxylate here :

https://brainly.com/question/29465484

#SPJ11

The Box-Cox procedure is used to determine an appropriate power transformation for a set of data. The Box-Cox procedure is a statistical technique used to identify an appropriate power transformation for a set of data.

Box-Cox procedure  helps to address issues such as nonlinearity, heteroscedasticity, and violations of normality assumptions.

To apply the Box-Cox procedure, the chemist would typically compute the log-likelihood function for a range of transformation parameters (λ) and select the value that maximizes the log-likelihood. This optimal value of λ indicates the appropriate power transformation for the data.

The power transformation adjusts the shape of the data distribution, aiming to make it more symmetrical and conform to the assumptions of statistical tests.

Common transformations include logarithmic, square root, and reciprocal transformations, among others. The choice of transformation depends on the characteristics of the data and the research question at hand.

By using the Box-Cox procedure, the chemist can identify the transformation that best improves the distributional properties of the data, allowing for more accurate statistical analysis and modeling.

Learn more about chemist here :

https://brainly.com/question/30007736

#SPJ11

When the equation is balanced, the coefficient of HCl is 2.

The balanced equation for the reaction is:

CaCO3 (s) + 2 HCl (aq) → CaCl2 (aq) + CO2 (g) + H2O (l)

To balance the equation, we need to ensure that the number of atoms of each element is equal on both sides.

In this case, there is one calcium (Ca) atom, one carbon (C) atom, and three oxygen (O) atoms on the left-hand side (reactants).

On the right-hand side (products), there is one calcium (Ca) atom, two chlorine (Cl) atoms, one carbon (C) atom, three oxygen (O) atoms, and two hydrogen (H) atoms.

To balance the equation, we need two HCl molecules on the left-hand side, which results in two Cl atoms on the right-hand side.

Therefore, the coefficient of HCl is 2 in the balanced equation.

To know more about balanced equation refer here

brainly.com/question/31242898#

#SPJ11

If you were to dissolve 2.5 grams of NaCl in 150 grams of water, you would call the NaCl the solute.

In a solution, the solute is the component that is being dissolved in a solvent. In this case, NaCl (sodium chloride) is being dissolved in water.

Therefore, NaCl is the solute. The solute is typically present in a smaller amount compared to the solvent.

When NaCl is added to water, the water molecules surround and separate the individual Na+ and Cl- ions, resulting in the formation of a homogeneous mixture. The water molecules act as the solvent in this process.

Thus, in the context of the given scenario, NaCl is considered the solute because it is being dissolved in the solvent (water) to form a solution.

For more details regarding solution, visit:

https://brainly.com/question/1616939

#SPJ1

In TLC (Thin Layer Chromatography), the substance that is less polar will generally have a higher Rf value.

By comparing the Rf values of methyl benzoate and methyl nitrobenzoate, we can determine which substance is less polar.

If methyl benzoate has a higher Rf value than methyl nitrobenzoate, it indicates that methyl benzoate is less polar. The higher Rf value suggests that methyl benzoate moved more easily up the TLC plate, indicating it had less interaction with the stationary phase and therefore a lower polarity.

Know more about Thin Layer Chromatography here:

https://brainly.com/question/10296715

#SPJ11

Answer: 0.80 moles CO2

Explanation: use stoichiometry to solve

9.0 L O2 x (1mole O2 / 22.4 L O2) X (2 mole CO / 1mole O2) =0.80 moles CO2

(a) The molar solubility of calcium fluoride in water is 2.1e-4 M.

(b) The molar solubility of calcium fluoride in 0.11 M KF solution is 4.0 M.

(c) The molar solubility of calcium fluoride in 0.46 M Ca(NO3)2 solution is 4.0 M.

(a) In pure water, the molar solubility of calcium fluoride is 2.1e-4 M. This means that at equilibrium, 2.1e-4 moles of calcium fluoride dissolve in 1 liter of water.

(b) When calcium fluoride is added to a solution of 0.11 M KF, the common ion effect comes into play. The fluoride ions from KF suppress the solubility of calcium fluoride. Consequently, the molar solubility of calcium fluoride increases to 4.0 M in this solution.

(c) Similarly, when calcium fluoride is added to a solution of 0.46 M Ca(NO3)2, the common ion effect occurs. The calcium ions from Ca(NO3)2 reduce the solubility of calcium fluoride. Thus, the molar solubility of calcium fluoride also reaches 4.0 M in this solution.

In both cases (b) and (c), the presence of a common ion reduces the solubility of calcium fluoride, causing more solid calcium fluoride to precipitate out of the solution.

For more questions like Solubility click the link below:

https://brainly.com/question/28170449

#SPJ11

Approximately 1794.1 grams of calcium nitrate need to be dissolved in 75 mL of water to form a solution with a freezing point of -2.2 °C.

To calculate the grams of calcium nitrate needed to form a solution with a specific freezing point, we need to consider the colligative property of freezing point depression. The formula to calculate the freezing point depression is:

ΔTf = Kf * m

where ΔTf is the freezing point depression, Kf is the cryoscopic constant for the solvent (water), and m is the molality of the solute.

Since the freezing point depression (ΔTf) is given as -2.2°C, we convert it to Kelvin by adding 273.15:

ΔTf = -2.2 + 273.15 = 270.95 K

The cryoscopic constant for water (Kf) is approximately 1.86 °C/m.

Now we can rearrange the formula to solve for the molality (m):

m = ΔTf / Kf

m = 270.95 K / 1.86 °C/m ≈ 145.9 mol/kg

Since molality (m) is defined as moles of solute per kilogram of solvent, we need to calculate the number of moles of calcium nitrate (Ca(NO3)2) required.

Next, we need to calculate the mass of water in the solution. Given that the density of water is approximately 1 g/mL, the mass of 75 mL of water is 75 g.

Finally, we convert the mass of water to kilograms and use the molality equation to calculate the moles of calcium nitrate needed:

mass of water = 75 g = 0.075 kg

moles of calcium nitrate = molality * mass of water

moles of calcium nitrate = 145.9 mol/kg * 0.075 kg = 10.94 mol

To find the grams of calcium nitrate, we need to multiply the number of moles by the molar mass of calcium nitrate (Ca(NO3)2), which is approximately 164.1 g/mol:

grams of calcium nitrate = moles of calcium nitrate * molar mass of Ca(NO3)2

grams of calcium nitrate = 10.94 mol * 164.1 g/mol = 1794.1 g

Know more about freezing point here;

https://brainly.com/question/31357864

#SPJ11

The rate of a chemical reaction is a measure of how quickly reactants are being converted into products or how quickly products are being formed. It represents the change in concentration of a reactant or product per unit of time.

At equilibrium, the concentration of reactants and products remains constant, and the rates of the forward and backward reactions become equal. Therefore, the correct answer is "concentration." The concentration of reactants and products reaches a steady state at equilibrium, meaning that the rate of the forward reaction is equal to the rate of the backward reaction. The rate constants, on the other hand, may be different for the forward and backward reactions, but they are related through the equilibrium constant for the reaction.

Learn more about equilibrium here ;

https://brainly.com/question/29627805

#SPJ11

PART 1:
CH3COOH(aq) + Sr(OH)2(aq) → Sr(CH3COO)2(aq) + 2H2O(l)
PART 2:
The other product formed is strontium acetate.
PART 3:
To write the net ionic equation, we first need to write the balanced ionic equation:
2CH3COOH(aq) + Sr(OH)2(aq) → Sr(CH3COO)2(aq) + 2H2O(l)
Now, we cancel out the spectator ions (ions that appear on both sides of the equation in the same form):
2CH3COOH(aq) + 2OH-(aq) → Sr(CH3COO)2(aq) + 2H2O(l)
The net ionic equation is:
2H+(aq) + 2OH-(aq) → 2H2O(l)
Note that in the net ionic equation, we only include the ions that participate in the reaction. The spectator ions are excluded.

To know more about spectator ions, visit:

https://brainly.com/question/22277121

#SPJ11

Consider the neutralization reaction between [tex]CH_3COOH[/tex] and [tex]Sr(OH)_2[/tex]. Net ionic equation would be:

[tex]2 CH_3COOH(aq) + Sr(OH)_2(aq) - > Sr(CH_3COO)_2(aq) + 2 H_2O(l)[/tex]

PART 1:

The neutralization reaction between acetic acid [tex](CH_3COOH)[/tex] and strontium hydroxide [tex](Sr(OH)_2)[/tex] can be balanced as follows:

[tex]2 CH_3COOH(aq) + Sr(OH)_2(aq) - > Sr(CH3COO)_2(aq) + 2 H_2O(l)[/tex]

PART 2:

The other product formed in the reaction is strontium acetate [tex](Sr(CH_3COO)_2).[/tex]

PART 3:

To write the net ionic equation, we need to exclude the spectator ions, which are the ions that appear on both sides of the equation without undergoing any chemical change.

The net ionic equation for the reaction between acetic acid and strontium hydroxide is:

[tex]2 CH_3COOH(aq) + Sr(OH)_2(aq) - > Sr(CH_3COO)_2(aq) + 2 H_2O(l)[/tex]

In the net ionic equation, we omit the spectator ions, which are the ions that remain unchanged:

Net ionic equation:

[tex]2 CH_3COOH(aq) + Sr(OH)_2(aq) - > Sr(CH_3COO)_2(aq) + 2 H_2O(l)[/tex]

To know more about neutralization reaction, refer here:

https://brainly.com/question/27745033

#SPJ4

To determine the pH of the buffer solution, we need to consider the dissociation of the acetic acid and the acetate ion.

Given:

Mass of calcium acetate (CH3COO)2Ca = 56.86 g

Molar mass of calcium acetate (CH3COO)2Ca = 158.2 g/mol

Volume of solution = 500 mL = 0.5 L

Concentration of acetic acid = 2.0 M

Ka of acetic acid = 1.8x10^-5

First, let's calculate the moles of calcium acetate (CH3COO)2Ca:

Moles of calcium acetate = Mass / Molar mass

Moles of calcium acetate = 56.86 g / 158.2 g/mol

Next, let's calculate the concentration of the acetate ion (CH3COO-) in the solution. Since calcium acetate dissociates into two acetate ions per formula unit:

Concentration of acetate ion = (2 × Moles of calcium acetate) / Volume of solution

Now, let's calculate the initial concentration of acetic acid (CH3COOH) in the solution, which is the same as the given concentration:

Initial concentration of acetic acid = 2.0 M

Using the Henderson-Hasselbalch equation for a buffer solution:

pH = pKa + log10 ([Acetate ion] / [Acetic acid])

Now we can substitute the values into the equation to calculate the pH:

pH = -log10(1.8x10^-5) + log10 ([Acetate ion] / [Acetic acid])

Learn more about pH  here:

https://brainly.com/question/2288405

#SPJ11

In chromatography, the spots of coloured substances are usually placed in a horizontal line on the paper.

This is because the paper is set up vertically, with the bottom in contact with a solvent, and as the solvent moves up the paper, it carries the substances with it, creating a vertical separation of the components. The spots are typically applied in a horizontal line near the bottom of the paper, so that they are separated vertically as the solvent moves up.

chromatography, technique for separating the components, or solutes, of a mixture on the basis of the relative amounts of each solute distributed between a moving fluid stream, called the mobile phase, and a contiguous stationary phase. The mobile phase may be either a liquid or a gas, while the stationary phase is either a solid or a liquid.

To learn more about chromatography https://brainly.com/question/28731153

#SPJ11

Athletes might abuse erythropoietin (EPO) to improve performance by increasing red blood cell production.

EPO is a hormone produced naturally in the body, primarily by the kidneys in the urinary system.

It stimulates the production of red blood cells in the bone marrow, leading to an increase in oxygen-carrying capacity in the blood. By artificially increasing EPO levels through abuse, athletes aim to enhance endurance and performance by improving oxygen delivery to the muscles.

However, it is important to note that the abuse of EPO and other performance-enhancing substances is considered unethical and against the rules of most sports organizations, as well as potentially harmful to health.

To know more abou turinary system.  refer here

brainly.com/question/31036866#

#SPJ11

The balanced equation for the reaction Sn + HNO[tex]_{3}[/tex]--> SnO[tex]^{2}[/tex] + NO[tex]^{2}[/tex] + H[tex]^{2}[/tex]O is: Sn + 4HNO[tex]_{3}[/tex] --> 2SnO[tex]^{2}[/tex] + 4NO[tex]^{2}[/tex] + 2H[tex]^{2}[/tex]O

To balance the reaction Sn + HNO[tex]_{3}[/tex] --> SnO[tex]^{2}[/tex] + NO[tex]^{2}[/tex] + H[tex]^{2}[/tex]O, we first need to ensure that the number of atoms on both sides of the reaction equation is equal. We can start by counting the number of atoms of each element in the reactants and products.

On the left side, we have one Sn atom and one H atom. On the right side, we have one Sn atom, two N atoms, three O atoms, and two H atoms. To balance the equation, we can start by adding coefficients to the reactants and products.

We can balance the N atoms by placing a coefficient of 2 in front of HNO[tex]_{3}[/tex], which gives us 2NO[tex]^{2}[/tex] and 1H[tex]^{2}[/tex]O on the product side. However, this creates an imbalance in the H atoms, with 4 H atoms on the product side and only 1 H atom on the reactant side.

To balance the H atoms, we can place a coefficient of 4 in front of HNO[tex]_{3}[/tex], which gives us 4NO[tex]^{2}[/tex] and 2H[tex]^{2}[/tex]O on the product side. Finally, we can balance the O atoms by placing a coefficient of 2 in front of SnO[tex]^{2}[/tex], which gives us 2NO[tex]^{2}[/tex] and 2H[tex]^{2}[/tex]O on the product side.

The balanced equation is now: Sn + 4HNO[tex]_{3}[/tex] --> 2SnO[tex]^{2}[/tex] + 4NO[tex]^{2}[/tex] + 2H[tex]^{2}[/tex]O

More on balancing equations: https://brainly.com/question/29156869

#SPJ11

The correct answer is A. chromate.

Chromate ions (CrO4^2-) typically form insoluble compounds with many cations, resulting in precipitates.

Examples include lead chromate (PbCrO4), silver chromate (Ag2CrO4), and barium chromate (BaCrO4). These precipitates are often brightly colored, with lead chromate known for its yellow color.

Bicarbonate (B), chlorate (C), and acetate (D) ions, on the other hand, generally form soluble compounds with most cations and do not typically result in insoluble compounds.

To know more about chromate refer here

https://brainly.com/question/32075040#

#SPJ11

The given polynomial 7b^3 + 3b^2 - 7b is a trinomial because it has three terms. It is also a cubic polynomial because the highest power of the variable 'b' is 3.

In polynomial classification, the degree refers to the highest exponent of the variable in the polynomial. In this case, the highest exponent is 3, so the degree of the polynomial is 3. The number of terms in a polynomial refers to the total count of individual terms separated by addition or subtraction. Here, we have three terms: 7b^3, 3b^2, and -7b. Thus, the given polynomial is classified as a cubic trinomial.

Learn more about Polynomial here ; brainly.com/question/11536910

#SPJ11