Answer:
Mercury Chloride
Explanation:
Trust me, this answer is correct.
How many moles of KCI would be dissolved in 4 L of water to make a 2 M
solution?
1
A.
mole
B. 2 moles
C. 8 moles
D. 4 moles
Answer:
C. 8 Moles
Explanation:
You have two pure substance that you cannot identify. Each sample is solid at room temperature. Describe at least five steps in the appropriate sequence that you would take to be able to identify the substance.
Answer:
pue like ad
Explanation:
For the two pure substance that you cannot identified , The steps taken in the right sequence are:
When two pure substance are places before you. you have to visually anaylse the sample, note the various colors that they have. It can tell you if it's an anions or cations.You can use reactants to precipitate the cations of the sample you have We then add a reactant to the sample and you did not see any precipitate, it corresponds to any of the elements or compound. If you do not see a precipitate, you can add other reactant.You then observe the color of this precipitate. example if the color changes to green, it will tell you that the substance is Ni(OH)₂ etc. One can also find out through the melting and boiling point of the two substances.Pure substance are regarded as substance that does not have impurities. one common way of finding out the purity of a substance is by its melting and boiling point determination.
Lear more from
https://brainly.com/question/2325398
What do chemical compounds want to obey?
Answer:
Their atoms obey the octet rule
Explanation:
Chemical compounds are formed when atoms combine with one another in order to comply with the octet rule. The octet configuration gives an atom stability in electronic structure.
When atoms become isoelectronic with noble gases, it confers a special stability on them. Therefore, to attain this state, they gain or lose electron or share their electrons with other species.A chemistry student conducted several different procedures. Which of the following procedures best demonstrates the law of conservation of mass?
O using filter paper to separate 2 grams of solid powder from 10 grams of water
O burning 2 kilograms of wood from a pine tree leaves 0.4 kilogram of ash and soot
O evaporating sugar water leaves 5 grams of sugar and turns the water into water vapor
O combining 2 grams of copper and 4 grams of sulfur to make 6 grams of copper sulfate
Answer:
combining 2 grams of copper and 4 grams of sulfur to make 6 grams of copper sulfate
Explanation:
The Law of Conservation of Mass states that matter cannot be created or destroyed in chemical reactions. It posits that the mass of a substance remains unchanged after undergoing a chemical process.
Therefore, according to the question, the procedure that best demonstrates the law of conservation of mass after the chemistry student conducted different procedures is option D.
This is because, the mass of copper and sulfate did not change but merely combined to form a compound.
defferent between crysttiline solid and amerphus solid
Answer:
Crystalline solids have well-defined edges and faces, diffract x-rays, and tend to have sharp melting points. In contrast, amorphous solids have irregular or curved surfaces, do not give well-resolved x-ray diffraction patterns, and melt over a wide range of temperatures.
Explanation:
Hope this helped!
Answer:
Crystalline solids have well-defined edges and faces, diffract x-rays, and tend to have sharp melting points. In contrast, amorphous solids have irregular or curved surfaces, do not give well-resolved x-ray diffraction patterns, and melt over a wide range of temperatures.
Explanation:
Can you answer these two questions right please and thank you
Answer:
B. LZAQD
A. Younger than A but older than Q
Explanation:
To solve this problem, we simply apply the stratigraphic laws which are the law of superposition and principle of cross cutting.
According to the law of superposition, in an undeformed sequence of strata, the oldest layer is always at the bottom and the youngest on top. In this case, we have a little disturbance but it did not affect much of the original bedding. So, the rock ages from L to Z to A to Q and D. L is the oldest and D is the youngest.According to the principle of cross-cutting "features that cuts through a rock are younger than the layers they cut through". In this problem, the fault cuts through layers LZ and A which suggests that these layers are older than the faulting event. Layer Q is unaffected by the faulting so, the fault is older than the layer.
20. What part of an atom exists in orbitals surrounding the nucleus?
A. electron
B. photon
C. neutron
D. proton
If element X has 6 valence electrons, what is the formula between element X and
magnesium.
a. X6Mg2
b. MgX3
c. MgX
d. XMg
A gas at -20c occupies volume 140 ml calculate temperature at which the volume of the gas becomes 65 ml pressure constant
Answer:
–156 °C
Explanation:
The following data were obtained from the question:
Initial temperature (T1) = –20 °C
Initial volume (V1) = 140 mL
Final volume (V2) = 65 mL
Final temperature (T2) =?
Pressure = constant.
Next, we shall convert –20 °C to Kelvin temperature. This can be obtained as follow:
T(K) = T(°C) + 273
Initial temperature (T1) = –20 °C
Initial temperature (T1) = –20 °C + 273 = 253 K.
Next, we shall determine the new temperature of the gas as follow:
Initial temperature (T1) = 253 K
Initial volume (V1) = 140 mL
Final volume (V2) = 65 mL
Final temperature (T2) =?
V1/T1 = V2/T2
140/253 = 65/T2
Cross multiply
140 × T2 = 253 × 65
140 × T2 = 16445
Divide both side by 140
T2 = 16445 /140
T2 = 117 K
Finally, we shall convert 117 K to celcius temperature. This can be obtained as follow:
T(°C) = T(K) – 273
T2 = 117 K
T2 = 117 K – 273
T2 = –156 °C
Thus, the new temperature of the gas is –156 °C
Toluene is subjected to the action of the following reagents in the order given: (1) KMnO4,OH-, heat; then H3O (2) HNO3, H2SO4 (3) Br2, FeBr3 What is the final product of this sequence?
Answer:
See image attached
Explanation:
The reaction of toluene with alkaline potassium permanganate in the presence of heat leads to the oxidation of the -CH3 to give benzoic acid.
Reaction benzoic acid with HNO3/H2SO4 yields the nitronium ion (NO2+).
Recall that -COOH is a metal director and deactivated the ring towards electrophilic substitution hence the m-nitrobenzoic acid is formed.
Reaction with FeBr3/Br2 yields the product shown in the image attached.
Balance the following equations ___Fe + __O2= ___Fe3O4
A collection of the same kind of cells working together to do the same job
Answer:
A group of cells doing the same job forms a tissue. A group of tissues working together forms an organ. Organs work in groups, too. A group of organs doing the same job is called a system.
Explanation:
What does this passage explain about people?
why mothers favor some children over others
the contrasting sides of human nature
why there is harmony in all things
left- and right-handedness
Answer:
the contrasting sides of human nature
Explanation:
I took the test
A rigid container filled with a gas is placed in ice (ex. nalgene bottle). What will happen to the pressure of the gas? What do you think will happen to the volume?(Graph)
Explanation:
The pressure will decrease but the volume remains constant
In a titration, you start with 0.05 M sodium hydroxide (NaOH) and slowly add it to 40 mL of HC1 with an unknown concentration. What is the original concentration of the HC1 if you add a total of 15.4 mL of sodium hydroxide to the HC1 to achieve pH =7?
Answer:
The original concentration of the HCl is: 0.01925 M
Explanation:
Equation:
HCl+NaOH-------> NaCl+H₂O
Volume of NaOH added = 0.05 M
No of moles of NaOH = 15.4 mL [tex]x\frac{1 L}{1000 mL} x\frac{0.05 mol NaOH}{L}[/tex]
= 0.00077 mol NaOH
Then,
Volume of HCl solution = 40 mL x 1/1000 mL
= 0.0400 L
Therefore,
Concentration of HCl = 0.00077 mol/0.0400 L
= 0.01925 M
Now, to find the pH:
pH = -log₁₀[H⁺]
= -log₁₀(2x10⁻⁶)
= 5.7
a sample gas is in the rigid cylinder with a movable piston the pressure of the gas is kept constant if the kelvin temperature of the gas is doubled the volume of the gas is?
Answer:
The pressure of the gas is kept constant. If the Kelvin temperature of the gas is doubled, the volume of the gas is. O 1.
Sugar and Salt in water magnetism, state of matter, or solubility?
please help!!!!
Answer:
solubility
Explanation:
how many sodium ions are in 1.4 kg of sodium chloride, NaCl?
Answer:
1.44 x 10²⁵ ions of Na⁺
Explanation:
Given parameters:
Mass of NaCl = 1.4kg = 1400g
Unknown:
Number of ions of sodium = ?
Solution:
The compound NaCl in ionic form can be written as;
NaCl → Na⁺ + Cl⁻
In 1 mole of NaCl we have 1 mole of sodium ions
Now, let us find the number of moles in NaCl;
Number of moles = [tex]\frac{mass}{molar mass}[/tex]
Molar mass of NaCl = 23 + 35.5 = 58.5g/mol
Number of moles = [tex]\frac{1400}{58.5}[/tex] = 23.93mol
So;
Since 1 mole of NaCl gives 1 mole of Na⁺
In 23.93 mole of NaCl will give 23.93 mole of Na⁺
1 mole of a substance = 6.02 x 10²³ ions of a substance
23.93 mole of a substance = 6.02 x 10²³ x 23.93
= 1.44 x 10²⁵ ions of Na⁺
10. For each of the following pairs of ionic compounds, state which would be expected to have the higher (more negative) lattice energy.
a. LiF or KBr
b. NaCl or MgS
c. MgO or RbI
Answer:
C I belive
Explanation:
The higher lattice energy in option a is for LiF. Similarly, MgS have higher lattice energy that NaCl and MgO have higher lattice energy than RbI.
What is lattice energy?Lattice energy of a compound is the energy required to convert one mole of that compound into its constituent gaseous ions. Lattice energy increases as the size of the ion decreases. As well as, higher the charge of the ions higher will be the lattice energy.
In LiF and KBr, Li and F are the smaller ions and is having higher lattice energy. In the case of NaCl and MgS, Mg and S are having +2 charge and are smaller causes MgO higher in lattice energy.
Similarly in the case of MgO and RbI the same concept can be applied. Rb⁺ and I⁻ are bigger ions where as Mg²⁺ and O²⁻ are comparatively smaller and have higher charge result in higher lattice energy.
Thus compound which have higher lattice energy in option a is LiF, in option b is MgS and in option C is MgO.
To learn more about lattice energy, refer the link below:
https://brainly.com/question/17011733
#SPJ2
A scientist performs an experiment involving the collision of two masses on a flat surface. She believes she has made a startling discovery: the total kinetic energy is not conserved. What might she have overlooked?
A.
Some gravitational potential energy may have been gained.
B.
Some gravitational potential energy may have been lost.
C.
Some energy may have been gained due to friction and/or sound.
D.
Some energy may have been lost due to friction and/or sound.
Answer:
c
Explanation:
Copper coins turn green when exposed to water. What happens to this chemical reaction if the coins are heated?
1.The coins will turn green slower because chemical reactions slow down with higher temperatures
2.The coins will turn green faster because chemical reactions speed up with higher temperatures
3.The coins will turn green at the same rate as before because temperature has no affect on the speed of chemical reactions
4.The coins will not turn green, algae cannot survive in hot temperatures
Answer:
The coins will turn green faster because chemical reaction speed up with higher temperatures
Copper coins turn green when exposed to water because the coins will turn green faster because reaction speeds up with higher temperatures.
What is the rate of the chemical reaction?The rate of a chemical reaction can be defined as the speed at which the products are formed from the reactants. The rate of a reaction gives information about the time frame under which a reaction can be finished.
The rate of reaction can be described as the speed of a chemical reaction at which reactants are transformed into products. Some chemical reactions are generally instantaneous, while some reactions take time to reach the final equilibrium. Pressure increases the concentration of gaseous reactants resulting in an increase in the rate of reaction.
The rate of reaction will increase with an increase in the temperature of the reaction as the reactant molecules get more kinetic energy and increase the number of collisions.
Therefore, copper coins will turn green faster because reactions speed up with higher temperatures.
Learn more about the rate of reaction, here:
brainly.com/question/13571877
#SPJ2
A child is prescribed morphine sulfate at 35.0 mcg/kg/dose. The child weighs 85 lb and the solution is available as a 5.0-mg/mL vial. How many milliliters should be injected?
Answer:
270 mL
Explanation:
First we convert the child's weight to kg:
85 lb * [tex]\frac{453.592g}{1 lb} *\frac{1kg}{1000g}[/tex] = 38.56 kgSo the total mass of morphine sulfate that should be injected is:
38.56 kg * 35.0 mg/kg/dose = 1349.6 mg/doseFinally we calculate the volume that should be injected, using the concentration of the available solution:
1349.6 mg ÷ 5.0 mg/mL = 269.9 ≅ 270 mLThe accurate millilitre is 268 mL.
First of all, we must obtain the mass of the child in kilograms;
1 Ib = 0.45 Kg
85 lb = 85 lb × 0.45 Kg/1 Ib
= 38.25 Kg
If 1 Kg takes 35.0 mcg/kg/dose
38.25 Kg takes 38.25 Kg × 35.0 mcg/kg/dose/1 Kg
= 1338.75 mg/dose
Hence;
1338.75 mg/dose/5.0-mg/mL = 268 mL
Learn more about drug dosage: https://brainly.com/question/24793154
A compound of copper and sulfur contains 76.84 g of metal and 38.53 g of nonmetal. How many grams of copper are in 3801 kg of the compound? How many grams of sulfur?
Answer:
There are:
2'531,500 g Cu1'269,500 g SExplanation:
First calculate the percentage of Cu and S in the compound:
Total mass = 76.84 g + 38.53 g = 115.37 g% metal (Cu) = 76.84/115.37 * 100% = 66.6%% metal (S) = 38.53/115.37 * 100% = 33.4%These percentages will remain the same no matter how much of the compound we analyze.
Now we calculate the grams of Cu and S in 3801 kg of the compound:
kg Cu = 3801 kg * 66.6/100 = 2531.5 kg Cug Cu = 2531.5 kg * 1000 = 2531500 g Cukg S = 3801 kg * 33.4/100 = 1269.5 kg Sg S = 1269.5 kg * 1000 = 1269500 g SA student has a balloon with a volume of 2.5 liters that contains 4.0 moles of air. The ballon has a small leak, allowing one mole to escape, leaving just 3.0 moles of air inside the balloon. What is the balloon's new volume after the air has escaped?
Answer:
1.9 L
Explanation:
Step 1: Given data
Initial number of moles of air (n₁): 4.0 molInitial volume of the balloon (V₁): 2.5 LFinal number of moles of air (n₂): 3.0 molFinal volume of the balloon (V₂): ?Step 2: Calculate the final volume of the balloon
According to Avogadro's law, the volume of an ideal gas is directly proportional to the number of moles. We can calculate the final volume of the balloon using the following expression.
V₁ / n₁ = V₂ / n₂
V₂ = V₁ × n₂ / n₁
V₂ = 2.5 L × 3.0 mol / 4.0 mol
V₂ = 1.9 L
According to VSEPR theory, a molecule with the general formula AX4 E1 will have a __________ molecular shape.a. T-shaped square planar b. seesaw c. trigonal planar d. trigonal bipyramidal e. tetrahedral
Answer:
The answer is "Option e"
Explanation:
The ionic bond arousal system of the outer shells (VSEPR) allows us to determine which one of the feasible solutions are found in the majority of instances. It's also supposed to occupy the space with electrical pairs and also to reduce electrical couple repulsive forces to a minimum, its cheapest electricity framework. This theory can be used for predicting a form of electron pairs with a different mass of a particle's core electrons.
what reacts at room temperature with ethanol and also with ethanoic acid
Answer: Its esterification reaction.
when organic acid react with alcohol it forms ester and water. reaction is known as esterification reaction.
CH3COOH + C2H5OH → CH3COOC2H5 + H2O
ethanoic acid + ethanol → ethyl acetate + water
this reaction takes place in the presence of acid catalyst ( dil H2SO4).
in this reaction oxygen of ethanol with lone pair act as nucleophile and carbonyl carbon of acetic acid act as electrophile.. so its nucleophilic substitution reaction of -COOH group.
Explanation:
Fossil fuels contribute to about 85% of the total energy produced in the world. What is a direct environmental
consequence of the extensive use of fossil fuels?
Answer:your a poop face
Explanation:
Imagine not knowing the answer
Answer: C
Explanation:
Why does determining volume work only for a regular shaped object
Answer:
Because only regular-shaped objects have a consistent length, width, height, and shape.
Explanation:
Because only regular-shaped objects have a consistent length, width, height, and shape. When dealing with an object composed of differing shapes, your must calculate each portion separately and then add them.
H20+ SO3 ? Which compound is likely produced by the chemical reaction?
Answer:
h2so4
Explanation:
im big brain.
Complete the balanced molecular chemical equation for the reaction below.
If no reaction occurs, write NR after the reaction arrow.
Cu2SO4(aq) + Li3PO4(aq)
Answer:
Following are the complete balance of the given equation:
Explanation:
Given equation:
[tex]Cu_2SO_4(aq) + Li_3PO_4(aq)[/tex]
[tex]Cu_2So4\ (aq)+Li_3Po_4 \(aq) \longrightarrow Cu_3(Po_4)\ (aq)+Li_2So_4 \ (aq)[/tex]
After Balancing the equation:
[tex]3 Cu_2So4\ (aq)+ 2 Li_3Po_4\ (aq) \longrightarrow 2 Cu_3(Po_4)\ (aq)+ 3Li_2So_4 \ (aq)[/tex]
In the above equation, when the 3 mol Copper sulfate reacts with 2 mol lithium phosphate , it will produce 2 mol Copper phosphate and 3 mol Lithium sulfate .