What is all 4 correct units for pressure?

The spectator ions in this reaction are NH4+ and Cl-.

To identify the spectator ions in the reaction between ammonium phosphate and calcium chloride  in aqueous solution, we first need to write the balanced equation and determine the products of the reaction:

(NH4)3PO4 (aq) + CaCl2 (aq) → 3NH4Cl (aq) + Ca3(PO4)2 (s)

Now, let's identify the spectator ions. These are ions that do not participate in the reaction and remain unchanged in the solution.

In this reaction:
1. NH4+ is a spectator ion, as it appears in both the reactants ammonium phosphate and the products ammonium chloride in its same ionic form.
2. Cl- is also a spectator ion, as it appears in both the reactants calcium chloride and the products ammonium chloride in its same ionic form.

So, the spectator ions in this reaction are NH4+ and Cl-.

Learn more about spectator ion : https://brainly.com/question/22277121

#SPJ11

Answer:

The puffer fish inflates itself by sucking water or air into its stomach, which causes its body to inflate and become larger.

Explanation:

The atomic number of an element represents the number of protons in the nucleus. In this case, the atomic number is 6. Therefore, there are 6 protons in the nucleus of this element. The correct answer is B. 6.

The atomic number of an element represents the number of protons in the nucleus. In this case, the atomic number is 6, which means there are 6 protons in the nucleus. The atomic mass is the sum of the number of protons and neutrons in the nucleus. Since the atomic mass is 12.01 and the atomic number is 6, we can subtract 6 from 12.01 to get the number of neutrons. This gives us a neutron count of approximately 6.01.

Therefore, The answer is B. 6 protons are in the nucleus of this element.

Learn More about nucleus here :-

https://brainly.com/question/21083478

#SPJ11

The determine whether or not a combination of substances can create a buffer, in this case, we have 0.05 M HNO2 and 0.05 M NaNO2. HNO2 is a weak acid and NaNO2 is its conjugate base.

The combination can create a buffer solution. The buffer capacity of a solution is highest when the concentrations of the weak acid and its conjugate base are equal. However, since the concentration of both substances is the same in this case, the buffer capacity of this solution is not maximized. To optimize the buffer capacity, we could adjust the concentrations of HNO2 and NaNO2, but in this case, it is not necessary. We can be confident that this combination of substances can create a buffer solution. In summary, the combination solution of 0.05 M HNO2 and 0.05 M NaNO2 can be used to create a buffer since HNO2 is a weak acid and NaNO2 is its conjugate base.

learn more about acid here.

https://brainly.com/question/14072179

#SPJ11

Answer:

HF and CH3OH

Explanation:

Hydrogen bonding is a special strong dipole-dipole interaction.

For hydrogen bonding to occur there must be:

1. An H atom bonded covalently to a N, O, or F atom. This bond between H and N, O, or F describes the particular hydrogen as an "H bond donor"- a necessary part of a hydrogen bond

2. An O, F, or N atom with one or more lone pairs. The presence of lone pairs on any of these atoms makes these atoms "H bond acceptors"- the second component of intermolecular hydrogen bonding

So, to start draw the lewis structure of each atom. Assuming this question is asking if it is possible for the atom to hydrogen bond with itself, we can already eliminate CH3CH3  and H2S due to their lack of an N, O ,or F atom.

Descriptions of each lewis structure:

HF: H contributes 1 electron and F contributes 7, H can only be single bonded to another atom, so the F atom has three lone pairs

CH3OH: 4+ (4H*1) + 6 = 14 electrons, H cannot be the central atom so the C and O atom must be in the center. The C atom has three single bonds with 3 H atoms and one single bond with the O atom, completing the octet. The O atom has a single bond with the last H atom and two lone pairs.

The presence of lone pairs in both HF (on the F atom) and CH3OH (on the O atom) creates the possibility for H bond acceptors.

Therefore, hydrogen bonding is an important intermolecular force in HF and CH3OH

The three lone pairs on fluorine act as H bond acceptors and H covalently bonded to F creates an H bond donor

The two lone pairs on oxygen act as H bond acceptors and the H covalently bonded to the O acts as an H bond donor

The hydrogen bonding is an important intermolecular force in the following compound: HF (hydrogen fluoride) and CH₃OH (methanol).

Hydrogen bonding occurs when there is a significant electronegativity difference between hydrogen and a highly electronegative atom, such as fluorine, oxygen, or nitrogen. In HF, hydrogen is bonded to fluorine, a highly electronegative atom, resulting in hydrogen bonding. In CH₃OH, hydrogen is bonded to oxygen, another highly electronegative atom, which also results in hydrogen bonding.

CH₃CH₃ (ethane) and H₂S (hydrogen sulfide) do not exhibit hydrogen bonding as their intermolecular forces because the electronegativity difference between their atoms is not significant enough to result in hydrogen bonding.

To know more about the hydrogen bonding refer here :

https://brainly.com/question/30885458#

#SPJ11

Therapeutic compatibility, The synergism between calcium ion and digoxin is a therapeutic compatibility as it enhances the therapeutic effect of digoxin.

The calcium ion helps to increase the contractility of the heart muscle and can improve the effectiveness of digoxin in treating heart failure. The synergism between calcium ion and digoxin represents a therapeutic incompatibility.

This is because the combined effect of these two substances can lead to an increased risk of digoxin toxicity, which can be harmful to the patient. It is important to carefully monitor and manage the use of both calcium and digoxin in a clinical setting to avoid adverse effects.

To know more about muscle click here

brainly.com/question/6616992

#SPJ11

The correct option is D, The answer of ΔG f° for Ag2O(s) is -11.2 kJ/mol.

ΔG = ΔG° + RT ln Q

At equilibrium, Q = K. Therefore:

ΔG° = -RT ln K

Plugging in the given values, we get:

ΔG° = -(8.314 J/(mol·K) × 298 K) × ln(8.44 × 10³)

ΔG° = -11.2 kJ/mol

Equilibrium refers to a state where the rate of the forward reaction is equal to the rate of the reverse reaction, resulting in no net change in the concentration of reactants or products. This means that the system is balanced and has reached a stable state.

Equilibrium is an important concept in chemical reactions, as it determines the extent to which a reaction will proceed. The equilibrium constant (Kc) is a quantitative measure of the position of the equilibrium and is used to calculate the concentrations of reactants and products at equilibrium. Le Chatelier's principle is a useful tool to predict how a system will respond to changes in temperature, pressure, or concentration. For example, if the concentration of reactants is increased, the system will shift towards the products to restore equilibrium.

To learn more about Equilibrium visit here:

brainly.com/question/30807709

#SPJ4

The time frame used as the criterion for escape is 30 minutes, which means that workers must be able to escape from the hazardous area within 30 minutes without suffering any life-threatening or irreversible health effects.

The IDHL (Immediately Dangerous to Life or Health) is an occupational exposure limit (OEL) that specifies the maximum concentration of a hazardous substance in the air that can cause irreversible health effects or death within a specified time frame. The time frame used as the criterion for escape is 30 minutes, which means that workers must be able to escape from the hazardous area within 30 minutes without suffering any life-threatening or irreversible health effects.

Therefore, it is crucial for employers to have emergency response plans, including evacuation procedures, in place to ensure the safety of workers in case of exposure to IDHL substances.

The IDHL (Immediately Dangerous to Life or Health) is an OEL (Occupational Exposure Limit) that uses a specific time frame as the criterion for escape. Out of the given options, the correct time frame for the IDHL is 30 minutes. This means that exposure to a hazardous substance at the IDHL concentration should not be longer than 30 minutes to prevent immediate danger to life or health.

Learn more about IDHL at: brainly.com/question/29063120

#SPJ11

The closest whole number ratio is 1:1:4, so the empirical formula is [tex]FeSO_4[/tex]

Mass of iron = 36.76 g

Mass of sulfur = 21.11 g

Mass of oxygen = 42.13 g

Next, we need to convert the masses to moles by dividing by the respective atomic masses:

Moles of iron = 36.76 g / 55.85 g/mol = 0.658 mol

Moles of sulfur = 21.11 g / 32.06 g/mol = 0.658 mol

Moles of oxygen = 42.13 g / 16.00 g/mol = 2.632 mol

Now, we need to divide each of the mole values by the smallest value to get the mole ratio:

Moles of iron / 0.658 = 1.000

Moles of sulfur / 0.658 = 1.000

Moles of oxygen / 0.658 = 4.000

The empirical formula represents the simplest whole-number ratio of atoms in a compound. It is a chemical formula that expresses the relative proportions of each element present in a molecule or compound. The empirical formula is derived from the elemental composition of the compound, which is obtained from experimental data, such as mass or percent composition.

To determine the empirical formula, one must divide the subscripts in the chemical formula by their greatest common factor. For example, the molecular formula for glucose is [tex]C_6H_12O_6[/tex], but its empirical formula is [tex]CH_2O[/tex]. This indicates that the ratio of carbon to hydrogen to oxygen atoms in glucose is 1:2:1. The empirical formula is useful in determining the stoichiometry of chemical reactions, which is the study of the quantitative relationship between reactants and products.

To learn more about Empirical formula visit here:

brainly.com/question/14044066

#SPJ4

When an individual stops using a substance, a severely negative physiological reaction to removal of a psychoactive substance, which can be alleviated by the same or a similar substance, they may experience physical symptoms known as withdrawal.

Withdrawal occurs due to a severely negative physiological reaction to the removal of a psychoactive substance, which can be alleviated by the same or a similar substance. The body and brain become dependent on the substance to function normally, and when the substance is removed, the person experiences discomfort as the body tries to readjust. Physical symptoms of withdrawal can vary depending on the substance used, the duration of use, and individual factors. Common symptoms may include headaches, nausea, sweating, tremors, insomnia, and muscle aches. In more severe cases, withdrawal symptoms can be life-threatening, such as seizures, hallucinations, and extreme agitation.

It is essential to seek professional help when attempting to stop the use of a substance, as some withdrawal symptoms may require medical supervision and intervention. Treatment options for managing withdrawal symptoms may include medications to alleviate specific symptoms, counseling and support groups to help with the emotional aspects of withdrawal, and, in some cases, substitution therapy with a less harmful substance to gradually reduce the body's dependence on the original substance. By addressing both the physical and psychological aspects of withdrawal, individuals can increase their chances of successfully stopping substance use and maintaining long-term recovery.

Learn more about psychoactive here:

https://brainly.com/question/20935120

#SPJ11

Here let us assume that the volume of hydrogen produced is at STP condition. At 273 K and 1 atm, 1 mole of any gas behaving ideally occupies a volume of 22.414 L. Here the mass of solid lithium is 9.36 g.

The volume occupied by one mole of a substance at a given temperature and pressure is called its molar volume at that temperature and pressure.

The number of moles of gas is:

Number of moles = V in L / 22.414 = 15.0 / 22.414 = 0.66 moles

The reaction equation is shown below;

2Li    +     2H₂O   →     2LiOH    +    H₂

1 mole of hydrogen gas is produced from 2 moles of Li;

0.66 moles of hydrogen will be produced from 0.66 x 2  = 1.33 moles

Mass of solid lithium  = number of moles x molar mass

1.33 × 7 = 9.36 g

To know more about molar volume, visit;

https://brainly.com/question/4172228

#SPJ1

(a) Acidity: HCl > HBr > HI. The order of acidity of HCl, HBr, and HI is determined by their relative strengths. HCl is the strongest acid in the group, followed by HBr and then HI.

HCl has the greatest number of hydrogens, which allows it to donate more protons and thus produce more acidic solutions. HBr and HI both have fewer hydrogens, making them weaker acids than HCl.

(b) Basicity: H2O > OH− > H− > Cl−

The order of basicity of H2O, OH−, H−, and Cl− is determined by the relative strengths of the conjugate acids of the bases. H2O has the strongest conjugate acid, and therefore is the strongest base in the group.

OH− is the next strongest base, followed by H− and then Cl−. The conjugate acid of Cl− is the strongest of the acids, making it the weakest base of the group.

(c) Basicity: Mg(OH)2 > Si(OH)4 > ClO3(OH) (HClO4)

The order of basicity of Mg(OH)2, Si(OH)4, and ClO3(OH) (HClO4) is determined by their relative strengths. Mg(OH)2 has the strongest conjugate acid, and is thus the strongest base in the group.

Si(OH)4 is the next strongest base, followed by ClO3(OH). The conjugate acid of ClO3(OH) is the strongest of the acids, making it the weakest base of the group.

(d) Acidity: HF > H2O > NH3 > CH4

The order of acidity of HF, H2O, NH3, and CH4 is determined by their relative strengths. HF is the strongest acid in the group, followed by H2O and then NH3. CH4 is the weakest acid in the group.

HF has the greatest number of hydrogens, which allows it to donate more protons and thus produce more acidic solutions. H2O and NH3 both have fewer hydrogens, making them weaker acids than HF. CH4 has no hydrogens, making it the weakest acid of the group.

Know more about conjugate acids here

https://brainly.com/question/31229565#

#SPJ11

The correct answer to the given question is B) will corrode if connected to a less active metal. The galvanic series is a list of metals and alloys arranged in order of their relative electrochemical activity in seawater or other aqueous solutions.

The more active (or anodic) metals, such as magnesium and zinc, are located at the top of the series, while the less active (or cathodic) metals, such as gold and platinum, are at the bottom. When two different metals are in contact in an electrolyte, such as seawater, a potential difference is created, and one of the metals becomes the anode and corrodes, while the other becomes the cathode and is protected from corrosion. The more active metal will corrode, while the less active metal will remain unaffected. This phenomenon is known as galvanic corrosion. Therefore, option B) is the correct answer, as the more active metals will corrode if connected to a less active metal due to the potential difference created between the two metals.

Learn More about electrochemical activity here :-

https://brainly.com/question/31606417

#SPJ11

To draw the partial orbital picture of CH2 (singlet methylene carbene) and include p-orbital, lone pair orbital, three-dimensional geometry, and hybridization, follow these steps:

1. Draw the carbon atom at the center, with two hydrogen atoms bonded to it in a V-shape. This indicates the molecule has a bent structure.

2. For hybridization, the carbon atom is sp2 hybridized. This means that one s-orbital and two p-orbitals on the carbon atom have mixed to form three sp2 orbitals.

3. Arrange the three sp2 hybrid orbitals in a trigonal planar geometry around the carbon atom, with bond angles of approximately 120 degrees. Connect one sp2 orbital to each hydrogen atom, and one sp2 orbital will have a lone pair of electrons.

4. The remaining p-orbital on the carbon atom, which is perpendicular to the plane of the molecule, will be unhybridized and empty.

So, the partial orbital picture of CH2 (singlet methylene carbene) shows a carbon atom with a bent geometry, sp2 hybridization, and an empty p-orbital perpendicular to the plane of the molecule. The carbon atom is bonded to two hydrogen atoms, and there is a lone pair of electrons in one of the sp2 orbitals.

To know what is hybridization : https://brainly.com/question/22765530

#SPJ11

The ideal gas law can be used to determine the gas's new pressure. According to the ideal gas law, pressure times volume equals the amount of a gas in moles times the global gas constant times the temperature.

Pressure = (number of moles of gas times the universal gas constant times the temperature) divided by volume is the new equation we may use to calculate pressure.

Since there are an equal amount of moles of gas in this situation, we can use the following formula to determine the new gas pressure: Pressure is equal to (4.3 L times 839.0oC) divided by (766.9 torr times 0.38 L). We obtain a new pressure of 118.6 atm by simplifying.

Learn more about pressure   at:

https://brainly.com/question/12971272

#SPJ1

The aluminum rod that is not totally submerged in the calorimeter after being transferred from hot water will have a negligible effect on the final temperature of the water/solution in the calorimeter. This is because aluminum has a high thermal conductivity and will quickly transfer any heat it contains to the water/solution in the calorimeter, regardless of whether it is fully submerged or not.

However, if the amount of aluminum not submerged is significant and the experiment is sensitive, it could introduce a slight error in the temperature measurement, but this is unlikely to be significant. It is important to note that any variation in temperature due to the aluminum rod not being submerged will be minimal and will not affect the overall validity of the experiment. Therefore, it is recommended to ensure that the aluminum rod is fully submerged for consistency and accuracy in the experiment, but if it is not, it is unlikely to have a significant impact on the final temperature measurement. Hi! When an aluminum rod is not fully submerged in the calorimeter after being transferred from hot water, it will affect the final temperature of the water/solution in the calorimeter. Since the entire rod isn't in contact with the solution, less heat will be transferred from the aluminum to the solution. As a result, the final temperature of the solution will be lower than if the rod were fully submerged, leading to inaccuracies in the calculated heat exchange. To obtain accurate results, ensure the aluminum rod is fully submerged during the experiment.

Learn more about calorimeter here

https://brainly.com/question/30581696

#SPJ11

1. The addition of more substrate reverses the inhibition of competitive inhibitor.2. Irreversible inhibitor forms a covalent bond with a group in the active site.3. Noncompetitive inhibitor bonds to the surface of the enzyme, causing a change in the shape of the enzyme and active site.4. Competitive inhibitor has a structure similar to the substrate.

Competitive inhibitors bind to the active site of an enzyme and compete with the substrate for binding. The addition of more substrate can overcome the inhibition because it increases the chances of substrate binding to the enzyme instead of the inhibitor.
Irreversible inhibitors form a covalent bond with a functional group in the active site of an enzyme, permanently inactivating the enzyme.

Noncompetitive inhibitors bind to a site on the enzyme that is different from the active site, causing a change in the shape of the enzyme and active site that prevents substrate binding.
Competitive inhibitors and the substrate have similar structures, which allows them to bind to the same active site.
1. The addition of more substrate reverses the inhibition of alanine: Competitive Inhibitor
2. Alanine forms a covalent bond with a group in the active site: Irreversible Inhibitor
3. Alanine bonds to the surface of the enzyme, causing a change in the shape of the enzyme and active site: Noncompetitive Inhibitor
4. Alanine has a structure similar to the substrate: Competitive Inhibitor

Learn more about alanine here:

https://brainly.com/question/19088437

#SPJ11

Phosphoric acid is corrosive since it has an unusually large Ka. It can cause severe damage to skin, eyes, and respiratory system upon contact. Inhaling phosphoric acid can also lead to pulmonary edema.

Phosphoric acid is usually found in a liquid form rather than a solid.
Is corrosive since it has an unusually large Ka. This means that it is a strong acid and can be harmful to tissues and materials due to its acidic nature.
                                                         Can cause pulmonary edema, which is a condition where fluid accumulates in the lungs and makes it difficult to breathe. This can happen if phosphoric acid is inhaled or ingested in large amounts.
Phosphoric acid is typically found as a liquid, not as a solid.

Learn more about Phosphoric acid

brainly.com/question/3700851

#SPJ11

(a) The balanced chemical reaction for the conversion of methanol (CH₃OH) to formaldehyde (HCHO) is as follows:

CH₃OH + 1/2 O₂ → HCHO + H₂O

In this reaction, methanol reacts with oxygen to produce formaldehyde and water.

(b) Administering whiskey (ethanol) to a person poisoned with methanol can be a good antidote because both methanol and ethanol are metabolized by the same enzyme, alcohol dehydrogenase. When ethanol is present, it competes with methanol for the enzyme, leading to a slower conversion of methanol to its toxic metabolite, formaldehyde.

This allows the body more time to eliminate methanol through the kidneys before it is converted into harmful substances, reducing the risk of severe poisoning, blindness, and death.

To know more about the methanol refer here :

https://brainly.com/question/24077457#

#SPJ11

Se2+ and I- are isoelectronic because they both have 54 electrons and the same electron configuration, which is 1s2 2s2 2p6 3s2 3p6 4s2 3d10 4p6. The correct answer is C.

For more such question on isoelectronic

https://brainly.com/question/14511468

#SPJ11

The color change of the Statue of Liberty from brown to green is a chemical change. Chemical changes occur when the composition of a substance changes and new substances are formed. In this case, the original brown color of the statue changed to green due to a chemical reaction between the copper material of the statue and the surrounding environment.

The Statue of Liberty is made of copper, and over time, the copper reacted with the moisture and air in the environment to form a layer of copper carbonate, which has a green color. This process is known as oxidation, which involves the loss of electrons from a substance.

Learn more about the oxidation and chemical change here.

https://brainly.com/question/29414039

#SPJ1

The reaction between CaC₂ and water produces 0.001 mol of Ca(OH)₂. The concentration of Ca(OH)₂ in the solution is 0.001 M, and the Ksp value is 1.0 x 10⁻⁹, indicating that the solution is not saturated, and no precipitation will occur.

The balanced equation for the reaction between CaC₂ and water is:

CaC₂(s) + 2H₂O(l) → Ca(OH)₂(s) + C₂H₂(g)

From the equation, 1 mole of CaC₂ reacts with 2 moles of water to form 1 mole of Ca(OH)₂.

The number of moles of CaC₂ used in the reaction is:

0.064 g CaC₂ x (1 mol CaC₂ / 64 g) = 0.001 mol CaC₂

Since 1 mole of CaC₂ produces 1 mole of Ca(OH)₂, the number of moles of Ca(OH)₂ produced is also 0.001 mol.

The initial volume of water is 1.0 L, which is equivalent to 1000 mL. Assuming that the volume of the solid CaC₂ is negligible compared to the volume of the water, the concentration of Ca(OH) in solution is:

[Ca(OH)₂] = (moles of Ca(OH)₂ produced) / (volume of water in liters)

[Ca(OH)₂] = 0.001 mol / 1.0 L = 0.001 M

The Ksp expression for Ca(OH)₂ is:

Ksp = [Ca²⁺][OH-]

Since Ca(OH)₂ is a strong base, it will dissociate completely in water to give Ca²⁺ and OH⁻ ions. Thus, the concentration of Ca²⁺+ and OH⁻ ions in the solution is equal to the concentration of Ca(OH)₂:

[Ca²⁺] = [OH⁻] = 0.001 M

Substituting the concentrations into the Ksp expression gives:

Ksp = (0.001 M)(0.001 M)² = 1.0 x 10⁻⁹

Since Ksp is greater than the given value of 8.0 x 10⁻⁸, the solution is not saturated with Ca(OH)₂ and no precipitation will occur. All of the Ca(OH)₂ will remain in solution.

To know more about the Ca(OH)₂ refer here :

https://brainly.com/question/15687677#

#SPJ11

The properties of a liquid to the relative strength of the intermolecular forces in that liquid.

For strong intermolecular forces, you can associate these properties:

1. High surface tension: Strong intermolecular forces result in a higher surface tension because the molecules are more attracted to each other, creating a tighter bond at the surface.

2. High boiling point: A high boiling point indicates strong intermolecular forces, as more energy is required to overcome the attraction between molecules and change the liquid into a gas.

3. High viscosity: Liquids with strong intermolecular forces have higher viscosity because the molecules are more attracted to each other, making it harder for them to flow past one another.

For weak intermolecular forces, you can associate this property:

1. High vapor pressure: A high vapor pressure indicates weak intermolecular forces, as it means the liquid evaporates easily and has a higher concentration of molecules in the gas phase above the liquid.

To know more about the  intermolecular forces refer here :

https://brainly.com/question/9328418#

#SPJ11

A solid matter with atoms arranged in a regular, repeating pattern is called a crystalline solid. In a crystalline solid, the atoms, ions, or molecules are organized into a highly ordered and periodic structure known as a crystal lattice.

This arrangement leads to unique properties and characteristics, such as distinct melting points, conductivity, and hardness.
There are several types of crystalline solids, including ionic, covalent, metallic, and molecular crystals, each with its unique bonding and structure. Ionic crystals are formed by the electrostatic attraction between oppositely charged ions, while covalent crystals consist of atoms connected by covalent bonds. Metallic crystals are composed of metal atoms with a sea of delocalized electrons, and molecular crystals are held together by intermolecular forces such as hydrogen bonding or van der Waals forces.
The regular arrangement of atoms in a crystalline solid contributes to its stability, as the repeating pattern minimizes the overall energy of the system. This regularity also affects the solid's physical properties, such as its ability to refract light, resulting in various optical phenomena like diffraction and interference.
The study of crystalline solids is an essential aspect of materials science and chemistry, as understanding their structure and properties allows scientists and engineers to design and synthesize materials with specific characteristics for various applications, from electronics to pharmaceuticals.
In contrast to crystalline solids, amorphous solids have atoms that lack a regular, repeating pattern. These disordered structures result in different physical properties and behaviours, distinguishing them from their crystalline counterparts.

To learn more about crystalline solid, refer:-

https://brainly.com/question/28274778

#SPJ11

The resulting species when a weak diprotic acid deprotonates will depend on the specific substance. It could be both an acid and a base or only an acid or a base. Therefore, Option C is correct.

When a weak diprotic acid deprotonates, it can form different species depending on the specific acid. A diprotic acid is capable of donating two protons (H+) per molecule.

If the first proton is completely removed from the diprotic acid, it will form a monoprotic base. In this case, the resulting species will act as a base because it can accept a proton (H+). This species can be described as a base.

To learn more about the diprotic acid, follow the link:

https://brainly.com/question/12772803

#SPJ12

The number of moles of zinc that were titrated in a solution prepared by dissolving a known mass of zinc chloride. The correct mathematical operation among the given options is: C.) volume EDTA x [EDTA] (moles / L) x (1 mole Zn / 1 mole EDTA)

Here's a step-by-step explanation:

1. Measure the volume of EDTA needed to titrate the sample.

2. Multiply the volume of EDTA by its concentration, given in moles per liter (moles / L).

3. Since there is a 1:1 ratio between moles of Zn and moles of EDTA, you can multiply the obtained value by the stoichiometric ratio (1 mole Zn / 1 mole EDTA).

4. The resulting value represents the number of moles of zinc that were titrated in the solution.

To know more about the EDTA refer here :

https://brainly.com/question/26556460#

#SPJ11

There are approximately 3.011 x 10^23 molecules of nitrogen gas in 14g of nitrogen gas at STP.

We calculate the amount of moles of nitrogen gas in 14g in order to determine how many molecules there are at STP.

Number of moles = mass / molar mass

Number of moles = 14g / 28 g/mol

Number of moles = 0.5 mol

So,  0.5 moles of nitrogen gas are present in 14g of nitrogen gas at STP.

The number of molecules in one mole of any substance, or Avogadro's number, can now be used to determine how many molecules are present in 0.5 moles of nitrogen gas:

Number of molecules = Avogadro's number x number of moles

Number of molecules = 6.022 x 10^23 molecules/mol x 0.5 mol

Number of molecules = 3.011 x 10^23 molecules

Therefore, there are approximately 3.011 x 10^23 molecules of nitrogen gas in 14g of nitrogen gas at STP.

Learn more about Avogadro's number here : brainly.com/question/16060223

#SPJ1

Answer:

a. To compare the concentration of 80 g/litre NaOH solution and 3 M NaOH solution, we need to convert one of the concentrations to the other unit.

One mole of NaOH weighs 40 grams. So, to convert 80 g/litre NaOH to Molarity, we can divide 80 g/litre by 40 g/mol to get:

80 g/litre NaOH = 2 M NaOH

Therefore, 3 M NaOH has a higher concentration than 80 g/litre NaOH solution.

b. To compare the concentration of 5.3 g/litre Na2CO3 and N/10 Na2CO3 solution, we need to first understand what N/10 solution means.

N/10 Na2CO3 means that the solution contains 1/10th of the normal concentration of Na2CO3. The normal concentration of Na2CO3 is the molar concentration of Na2CO3 that corresponds to the formula weight of Na2CO3, which is 106 g/mol.

So, the normal concentration of Na2CO3 is 1 mol/L or 1 M Na2CO3.

Therefore, N/10 Na2CO3 solution has a concentration of 1/10 M Na2CO3.

Now, let's compare the two concentrations:

5.3 g/litre Na2CO3 = (5.3/106) M Na2CO3 = 0.05 M Na2CO3

Since 0.05 M Na2CO3 is greater than 1/10 M Na2CO3, the concentration of 5.3 g/litre Na2CO3 solution is higher than that of N/10 Na2CO3 solution.

Explanation: