After a volcanic conduit has solidified and has been exposed by erosion, it is often referred to as a volcanic neck or a volcanic plug. These structures are formed when magma hardens within the volcanic conduit, which is the pathway through which magma travels from deep within the Earth's crust to the surface during a volcanic eruption.
As the magma cools and solidifies, it can become more resistant to weathering and erosion than the surrounding rock, causing it to stand out as a prominent feature in the landscape. Over time, erosion can wear away the softer rock around the volcanic neck, leaving behind a distinctive landform that can be seen in many volcanic regions around the world.
Volcanic necks and plugs are often composed of volcanic rock such as basalt, andesite, or rhyolite, and can range in size from small hills to towering peaks. They are often used as landmarks for hikers and climbers, and can also provide important clues for geologists studying the history of volcanic activity in an area
Learn more about volcanic here:
https://brainly.com/question/30437501
#SPJ11
An igneous pegmatite indicates that:
a. there was water in the magma
b. the rock cooled slowly and then quickly
c. the rock broke apart as it flowed
d. the rock cooled quickly
e. the ash and pumice were hot and became compacted
An igneous pegmatite indicates that b. the rock cooled slowly and then quickly
Pegmatite is a type of igneous rock that forms when magma cools slowly at first, allowing for the growth of large mineral crystals. After that initial slow cooling, the remaining magma cools more quickly, resulting in a mix of large and small crystals. This combination of cooling rates gives pegmatite its distinctive texture and composition.
Pegmatite can contain a wide variety of minerals, including rare and valuable minerals such as lithium, tantalum, and beryllium. Pegmatite deposits are an important source of these minerals and are mined for their economic value.
Pegmatite can provide important information about the conditions under which it formed, including the composition of the magma and the rate of cooling. The presence of certain minerals in pegmatite can also provide information about the geological history of the area in which it is found.
Learn more about pegmatite here:
https://brainly.com/question/29023279
#SPJ11
Mount St. Helens, one of several large volcanoes in the Cascade Range, has experienced a major eruption every ______ years since about 500 B.C.
Mount St. Helens, located in the state of Washington, is a well-known active volcano in the Cascade Range. Scientists estimate that the volcano has experienced a major eruption every 100 to 300 years since about 500 B.C.
However, the exact interval between eruptions is difficult to determine, as volcanic activity is influenced by a number of complex factors. The most recent major eruption of Mount St. Helens occurred on May 18, 1980, causing significant damage and loss of life in the surrounding area. The eruption resulted in the collapse of the volcano's north face, triggering a massive landslide and sending a plume of ash and volcanic material 15 miles into the air. The event was one of the most significant volcanic eruptions in the history of the United States, and it had a profound impact on the local environment and communities. Today, Mount St. Helens remains an active volcano, and scientists continue to study the mountain in order to better understand its behavior and potential for future eruptions.
Know more about Mount St. Helens here:
https://brainly.com/question/7602037
#SPJ11
A(n) _____ is a mudflow composed of volcanic debris that is fluid when moving but solidifies soon after stopping.
The term that fits this description is "lahar". Lahars are a type of volcanic mudflow that occur when volcanic ash, rock fragments, and other debris mix with water, often from melted snow or ice, to create a slurry that can travel down slopes and valleys at high speeds.
Lahars can be extremely destructive, as they can carry large boulders, trees, and other debris that can cause significant damage to buildings, roads, and other infrastructure in their path. They can also be deadly, as they can engulf entire villages and towns. Once a lahar stops moving, it quickly solidifies, becoming a hard, cement-like material that can be difficult to remove. Scientists and engineers have developed a number of strategies to mitigate the risk of lahars, including building protective barriers, diverting or containing flows, and monitoring volcanic activity to predict and prepare for potential eruptions.
Know more about Lahars here:
https://brainly.com/question/14643369
#SPJ11
Which two rock types would you expect to see sitting next to each other after a very long period characterized by only uplift and erosion?
A) metamorphic and sedimentary rocks
B) hard and soft rocks
C) extrusive igneous and intrusive igneous rocks
D) metamorphic and intrusive igneous rocks
A) Metamorphic and sedimentary rocks would be the two rock types you would expect to see sitting next to each other after a very long period characterized by only uplift and erosion.
After a very long period characterized by only uplift and erosion, you would expect to see metamorphic and sedimentary rocks sitting next to each other. Uplift exposes rocks to the surface, where erosion breaks them down into sediments. These sediments are then deposited and eventually form sedimentary rocks.
At the same time, the pressure and heat associated with uplift can cause changes in existing rocks, leading to the formation of metamorphic rocks.
Learn more about erosion here: brainly.com/question/30587260
#SPJ11
Soils of the world are classified into 11 orders. The orders are based on soil characteristics.
(1) The Carolinas (North and South) are dominated by ____ order. List the characteristics of this soil order. soil
(2) List the soil orders that dominate the Australian continent.
Major soil orders in Australia include Vertisols, Alfisols, Mollisols, Aridisols, Entisols, Inceptisols, Andisols, Gelisols, Histosols, Spodosols, and Ultisols.
(1) The Carolinas (North and South) are dominated by the Ultisols order. Ultisols are characterized by their strong acidity and low fertility due to the leaching of basic cations such as calcium, magnesium, and potassium. They are often found in humid regions with high rainfall and are typically derived from older, highly weathered parent materials such as granite or gneiss. Ultisols have a clay-rich subsoil layer called the argillic horizon, which is typically red or yellow in color due to the presence of iron oxides. This horizon can be quite thick, up to several meters deep in some cases. Ultisols are not well-suited for agriculture due to their low fertility and high acidity, but they are often used for forestry or grazing.
(2) The Australian continent is dominated by a number of different soil orders, reflecting the continent's diverse geology, climate, and vegetation.
Some of the major soil orders found in Australia include:
Vertisols: These are heavy clay soils that shrink and swell significantly with changes in moisture content, often forming deep cracks when dry. They are found in areas with a pronounced dry season and high temperatures, and are often used for grazing or dryland agriculture.Alfisols: These are moderately weathered soils with a clay-rich subsoil that is moderately fertile. They are often found in areas with a Mediterranean climate, and are well-suited for agriculture.Mollisols: These are deep, fertile soils with a high organic matter content, often found in grassland ecosystems. They are well-suited for agriculture and are used extensively for grazing and crop production.Aridisols: These are desert soils with low organic matter content and low fertility. They are found in arid and semiarid regions and are typically used for grazing.Entisols: These are young, poorly developed soils that lack a distinct subsoil horizon. They are found in a variety of environments and are often used for forestry or range management.Inceptisols: These are moderately developed soils with a weakly developed subsoil horizon. They are found in a variety of environments and are often used for forestry, grazing, or dryland agriculture.Other soil orders found in Australia include Andisols, Gelisols, Histosols, Spodosols, and Ultisols. Each of these soil orders has its own unique characteristics and distribution patterns, reflecting the complex interplay of geology, climate, and vegetation across the Australian continent.
Learn more about Mediterranean climate here:
https://brainly.com/question/9231311
#SPJ11
What is a fine-grained igneous rock composed primarily of very small crystals of potassium feldspar and a few large crystals of quartz?
The fine-grained igneous rock composed primarily of very small crystals of potassium feldspar and a few large crystals of quartz is called rhyolite. Rhyolite is a volcanic rock that is formed from the rapid cooling of lava that is rich in silica. It is often found in areas where there has been volcanic activity, such as around the Pacific Ring of Fire.
The small crystals in rhyolite are typically less than 1mm in size, which gives the rock a fine-grained texture. Rhyolite is also known for its light color, which can range from white to pink to gray. It is a relatively common rock type and has been used for building materials, as well as for decorative purposes. Despite its fine-grained texture, rhyolite is still considered an igneous rock because it is formed from the solidification of magma or lava.
Overall, rhyolite is a fascinating rock type with unique properties and characteristics that make it an important part of the geological landscape.
Learn more about rock here:
https://brainly.com/question/19930528
#SPJ11
Which of the following best explains why countries such as Brazil, Burma (Myanmar), Kazakhstan, and Nigeria would construct a new capital city in a different location from the old capital city?To attract world trade to a new siteTo distance the new capital cities from the countries' colonial historiesTo be better protected from foreign invasionTo be better situated along transportation networksTo build modern, planned cities and administrative centers
Answer:
To build modern, planned cities and administrative centers.
The best explanation for why countries such as Brazil, Burma (Myanmar), Kazakhstan, and Nigeria would construct a new capital city in a different location from the old capital city is to build modern, planned cities and administrative centers.
This allows for the creation of more efficient and effective governmental operations. However, some countries may also be motivated to distance the new capital cities from their colonial histories or to be better protected from foreign invasion. Being better situated along transportation networks can also be a factor in the decision to construct a new capital city, as it allows for easier access and movement of goods and people. Attracting world trade to a new site may also be a consideration, but it is typically not the primary reason for the construction of a new capital city.
Learn more about construct here:
https://brainly.com/question/15179798
#SPJ11
Which exoplanet orbits closest to its star?A. HD 149026-bB. OGLE-TR-113bC. TrES-1D. HD 209458-bE. XO-1b
Of the five options provided, the exoplanet that orbits closest to its star is HD 209458-b. This exoplanet is also known as Osiris and it orbits a star in the constellation Pegasus.
HD 209458-b is classified as a hot Jupiter, which means it is a gas giant planet that orbits very close to its host star, completing one orbit in just 3.5 Earth days. The distance between HD 209458-b and its star is only about 0.047 astronomical units (AU), which is about 7 million kilometers.
The other four options also orbit very close to their host stars and are also classified as hot Jupiters. HD 149026-b orbits at a distance of about 0.042 AU from its star, OGLE-TR-113b orbits at a distance of about 0.022 AU, TrES-1 orbits at a distance of about 0.039 AU, and XO-1b orbits at a distance of about 0.049 AU. However, HD 209458-b is the closest of these five exoplanets to its host star, making it a particularly interesting object for exoplanet studies.
Learn more about studies here:
https://brainly.com/question/20758569
#SPJ11
Based on the relationship between altitude and air pressure in the table, which graph best represents how altitude relates to air pressure?
This is shown in various scientific studies and can be represented by a graph with air pressure on the y-axis and altitude on the x-axis.
The shape of the graph will depend on various factors, such as temperature and moisture levels. It is important to note that air pressure and altitude are related, and changes in one will affect the other.
Maintaining proper air pressure is crucial for various activities related to aviation, weather forecasting, and scientific research.
As you go up in height, air pressure drops. this is due to the fact that the earth's gravity pulls on the air, compressing it, and creating pressure.
However, as we ascend, gravity weakens, exerting less of a pull on the air and lowering air pressure.
Learn more about air pressure here
https://brainly.com/question/355620
#SPJ1
Batholiths are known to form the cones of mountain ranges such as the Sierra Nevada, what is the implication of this observation?
The implication of Batholiths forming the cones of mountain ranges such as the Sierra Nevada is that it provides insight into the geological history of these regions.
It suggests that these mountains were formed through the uplift of the earth's crust due to the intrusion of large masses of molten rock (Batholiths). This process occurred over a long period of time and resulted in the creation of the distinctive cone-shaped peaks that we see today. Additionally, this observation may have practical applications for industries such as mining, as it can help geologists identify areas where valuable minerals may be located.
Overall, understanding the role of Batholiths in the formation of mountain ranges is an important aspect of geology and can provide valuable insights into the earth's history and composition. As for the term "salesman," it does not have any direct relevance to this topic.
Learn more about implication here:
https://brainly.com/question/28543176
#SPJ11
3. which city has the lowest annual rainfall? which city has the highest annual rainfall? (hint: remember you can hover the cursor over the appropriate dot on the dotplot.)
According to the dotplot, it appears that the city with the lowest annual rainfall is Las Vegas with only 4 inches of rainfall per year. On the other hand, the city with the highest annual rainfall seems to be New Orleans with over 60 inches of rainfall per year. It is interesting to note that the other cities on the dotplot fall somewhere in between these two extremes.
The low annual rainfall in Las Vegas is likely due to its location in the desert, where precipitation is scarce. In contrast, New Orleans is located in a region with a humid subtropical climate, which is characterized by high humidity and frequent rainfall.
Overall, the dotplot is a helpful tool for visualizing and comparing annual rainfall levels among different cities. It allows us to quickly identify the lowest and highest rainfall cities, as well as see how other cities compare.
To know more about rainfall refer here:
https://brainly.com/question/12907709?referrer=searchResults
#SPJ11
Load factors are applied to loads acting on building to account for which of the following (choose all that apply)
-Approximations in design methodology
Uncertainty in the magnitude and location of applied loads.
-Variation in construction (poor construction)
-Differences in material strength
Load factors are applied to loads acting on a building to account for uncertainty in the magnitude and location of applied loads and variations in construction (poor construction).
These factors are essential in ensuring the safety and stability of a structure, especially considering the unpredictability of natural disasters and other extreme events. Load factors also help to account for approximations in design methodology and differences in material strength, as they provide a margin of safety that compensates for any errors or discrepancies that may arise. In summary, load factors are a critical component of building design and construction, as they help to ensure that buildings are strong, stable, and able to withstand a range of challenging conditions over time.
To learn more about variations, visit:
https://brainly.com/question/1294079
#SPJ11
A gemstone that has been cut and polished is called a(n) ______________.
A gemstone that has been cut and polished is called a faceted gem or simply a gem. Faceting is the process of cutting and polishing the stone's surface to enhance its beauty and allow light to refract, producing a sparkling effect.
This process not only highlights the gemstone's natural color and clarity but also increases its overall aesthetic appeal and value. A gemstone that has been cut and polished is called a faceted gemstone. Faceting is the process of cutting a gemstone into a specific shape with precise angles and dimensions to maximize its brilliance and beauty. The art of faceting gemstones dates back centuries, with ancient civilizations like the Greeks and Romans valuing gemstones for their beauty and rarity. Today, gemstones are still highly prized for their beauty and can be found in a wide range of colors and varieties, including diamonds, sapphires, emeralds, rubies, and more. Gemstones can be used in a variety of ways, from jewelry and decorative objects to healing and spiritual practices. In all cases, the beauty and rarity of a faceted gemstone make it a truly special and valuable treasure.
Learn more about gemstone here
https://brainly.com/question/2213774
#SPJ11
How can plants physically weather a rock?
A) Plant roots grow around a rock, crushing it.
B) Plant roots exert outward pressures as they grow.
C) Acids created by plants chemically weather the rock.
D) Plants make fractures for water to fill, which will wedge fractures open.
Plants physically weather a rock due to the Plant roots exert outward pressures as they grow. Therefore the correct option is option B.
Through a process known as root wedging, plants can physically weather a rock. Growing plant roots may apply external pressure to the surrounding rock, causing it to crack and crumble.
This is especially useful in regions where the rock is porous or broken because the roots can grow into the fractures and widen them as they develop, allowing more room for water and other weathering agents to interact with the rock. Therefore the correct option is option B.
For such more question on weather:
https://brainly.com/question/28598079
#SPJ11
True or False? A mineral can scratch any mineral harder than itself.
False. A mineral can only scratch minerals that are softer than itself on the Mohs scale of mineral hardness. The Mohs scale ranks minerals from 1 (softest) to 10 (hardest).
For example, a mineral with a hardness of 7 can scratch minerals with a hardness of 6 or lower, but it cannot scratch minerals with a hardness of 8 or higher. This is because the harder mineral has stronger bonds between its atoms, making it more difficult to break or scratch. However, it is important to note that the Mohs scale is not a linear scale and the difference in hardness between each mineral may not be equal. Therefore, it is possible for a mineral to scratch another mineral with a slightly higher hardness, but it is not a general rule.
Learn more about mineral here
https://brainly.com/question/15844293
#SPJ11
Less than 1% of volcano-related deaths are caused by ______ because they move very slowly.
Less than 1% of volcano-related deaths are caused by lava flows because they move very slowly. Volcanoes, which are openings in the Earth's crust, release molten rock, ash, and gases during eruptions.
These natural events can lead to various hazards, including lava flows, pyroclastic flows, ashfall, and volcanic gases. Lava flows are streams of molten rock that emerge from a volcanic vent and move across the landscape. Due to their high viscosity and slow movement, typically ranging from a few meters per hour to a few kilometers per hour, people can usually evacuate the area in time, resulting in fewer fatalities compared to other volcanic hazards. Although lava flows can cause significant property damage and alter the landscape, the risk of direct human fatalities remains relatively low. In contrast, pyroclastic flows, which are fast-moving, ground-hugging mixtures of hot gas, ash, and rock fragments, pose a much greater threat to human life. They can travel at speeds of up to 700 kilometers per hour and can reach temperatures of 1,000 degrees Celsius. As a result, pyroclastic flows are responsible for the majority of volcano-related deaths. In summary, less than 1% of volcano-related deaths are caused by lava flows due to their slow movement, which allows people to evacuate and avoid fatal encounters. Other volcanic hazards, such as pyroclastic flows, are more dangerous and deadly.
Learn more about volcano here
https://brainly.com/question/30836519
#SPJ11
What effect did the Cuban Missile Crisis have on relations between the US and the USSR?
The Cuban Missile Crisis had a significant impact on the relationship between the US and the USSR. The crisis occurred in 1962, when the US discovered that the Soviet Union was placing nuclear missiles in Cuba. This caused a major standoff between the two nations, as the US feared that the missiles could be used to launch an attack on the US mainland.
The crisis ultimately ended with the Soviet Union removing the missiles from Cuba, but it left a lasting impact on the relationship between the two nations. The crisis highlighted the tensions and mistrust that existed between the US and the USSR, and it also demonstrated the potential for nuclear war. In the aftermath of the crisis, both nations took steps to improve communication and reduce tensions. This led to the establishment of a direct hotline between the White House and the Kremlin, which allowed for more immediate communication in times of crisis. Overall, the Cuban Missile Crisis served as a wake-up call for both the US and the USSR, as it showed that their actions could have far-reaching consequences. It also highlighted the importance of diplomacy and communication in avoiding conflicts and maintaining peaceful relations between nations.
Learn more about Cuban Missile Crisis here
https://brainly.com/question/1389707
#SPJ11
Hot, thin, runny lava flows with low silica content are typically _____.
a. rhyolitic
b. andesitic
c. basaltic
d. pyroclastic
e. Plinian
Hot, thin, runny lava flows with low silica content are typically basaltic. Basaltic lava is characterized by its low viscosity, which allows it to flow easily and spread out over long distances.
This type of lava typically erupts from shield volcanoes, which have gentle slopes and are formed by repeated basaltic eruptions. Rhyolitic lava, on the other hand, is thick and viscous, with a high silica content. This type of lava forms explosive eruptions and can create pyroclastic flows, which are fast-moving clouds of hot gas, ash, and rock fragments.
Andesitic lava has an intermediate composition between basaltic and rhyolitic lava, and is typically associated with stratovolcanoes, which have steep slopes and are formed by alternating layers of lava and pyroclastic deposits.
Pyroclastic materials refer to any fragments of rock ejected from a volcano, including ash, pumice, and volcanic bombs. Plinian eruptions are characterized by high columns of ash and gas, and are named after the Roman historian Pliny the Younger, who witnessed the eruption of Mount Vesuvius in 79 AD.
Learn more about Lava here:
https://brainly.com/question/15393639
#SPJ11
You have found a Mafic rock with a phaneritic texture what is a potential Rock name?
If you have found a mafic rock with a phaneritic texture, it is likely that you have come across a type of igneous rock known as gabbro. Gabbro is a dark-colored rock that is rich in minerals such as pyroxene, plagioclase, and olivine.
The term "mafic" refers to the composition of the rock, which contains high amounts of magnesium and iron, and "phaneritic texture" refers to the coarse-grained, visible crystals that make up the rock. Gabbro forms deep beneath the Earth's surface through slow cooling of magma or lava. As the magma cools, mineral crystals begin to form and grow, resulting in a phaneritic texture. Gabbro is a common rock type in the oceanic crust and can also be found in continental crust. Gabbro is a valuable resource in construction and building industries due to its durability and strength. It is used as a building material, for crushed stone, and in the production of ceramics and glass. Additionally, gabbro has been used as a decorative stone in architecture and landscaping.
Learn more about mafic rock here
https://brainly.com/question/31441805
#SPJ11
12 part II) Examine each of the placemarks following the sedimentary structure GigaPan. Which of these four settings is most likely the sort of environment where the sedimentary structure you identified in the previous question would have formed?Group of answer choicesA) a river flowing into the seaB) a delta distributaryC) a glacial moraineD) a field of sand dunes
Based on the sedimentary structure observed in the GigaPan, the most likely environment where it would have formed is a delta distributary. Hence the correct option is B.
This is because delta distributaries are known for their complex sedimentary structures, with layers of sand, mud, and gravel deposited in a variety of ways. The branching channels of a delta distributary also create a lot of turbulence, which can help to sort and layer different types of sediment. In contrast, a river flowing into the sea would have a more straightforward sedimentary structure, with coarser sediments deposited closer to the river mouth and finer sediments further out.
A glacial moraine would have a different type of sedimentary structure altogether, with large boulders and rocks deposited in a chaotic pattern by a glacier. A field of sand dunes would also have a simpler sedimentary structure, with layers of sand deposited by wind in a relatively uniform pattern.
To know more about Delta distributary, click here:
https://brainly.com/question/28556541
#SPJ11
Pyroclasts, the shattered fragments of erupted magma thrown up into the atmosphere during an eruption, are brought back to ground during the formation of ______. (Select all that apply.)
Pyroclasts, the shattered fragments of erupted magma, are brought back to the ground during the formation of volcanic deposits. Volcanic deposits are formed by the accumulation and consolidation of materials ejected during volcanic eruptions, including pyroclasts, lava flows, and ash.
These deposits can take on different forms depending on the type of eruption and the size of the particles that make up the pyroclasts. Some examples of volcanic deposits include tuff, which is made up of small, fine-grained particles; volcanic breccia, which is made up of large, angular fragments; and ignimbrite, which is formed by the deposition of hot ash and gas flows. In addition to forming distinct geological formations, volcanic deposits also provide important information about past eruptions and the history of a volcano. Scientists can study the composition and structure of volcanic deposits to better understand the timing, duration, and magnitude of past eruptions, which can help inform hazard assessments and mitigation strategies in areas prone to volcanic activity.
Know more about Pyroclasts here:
https://brainly.com/question/16582896
#SPJ11
What is the significance of this image?
A. It shows an actual disk of material orbiting another star, providing strong evidence the planets really do form in such disks
B. The large gap visible in the image represents the frost line of a young planetary system, demonstrating that such a line really exists.
C. It shows an artist's conception of what our solar system might have looked like when the planets were first forming.
D. It proves that jovian planets form farther from their stars than terrestrial planets.
It shows an actual disk of material orbiting another star, providing strong evidence the planets really do form in such disks. The correct answer is option a.
This image likely depicts a protoplanetary disk, a rotating disk of gas and dust that surrounds a young star and is believed to be the birthplace of planets.
By observing these disks around other stars, astronomers can study the processes of planet formation and gain insights into the conditions that gave rise to our own solar system.
The fact that such disks have been observed around numerous other stars provides strong evidence that planet formation is a common occurrence in the universe.
The correct answer is option a.
To know more about protoplanetary disk refer to-
https://brainly.com/question/29100942
#SPJ11
What mineral is the major component of rock salt?
A)quartz
B)halite
C)calcite
D)sylvite
E)gypsum
The answer to the question is that the major component of rock salt is B) halite. This mineral is responsible for the characteristic properties of rock salt.
Halite is the mineral form of sodium chloride (NaCl) and is commonly found in sedimentary rocks, such as rock salt and evaporites. It is also a common mineral in areas where seawater has evaporated, leaving behind salt deposits. Halite is used for various industrial purposes, such as de-icing roads, as a source of table salt, and in the production of chemicals like chlorine and sodium hydroxide.
Learn more about rock salt: https://brainly.com/question/9259374
#SPJ11
________ is a technique where the decay rate of radioactive isotopes is measured and used to determine the age of a geologic material.
Radiometric dating is a technique where the decay rate of radioactive isotopes is measured and used to determine the age of a geologic material.
It involves measuring the decay rate of radioactive isotopes in a sample of material and using that information to determine the age of the sample. The most common isotopes used in radiometric dating are carbon-14, potassium-40, and uranium-238. By measuring the ratio of parent isotopes to daughter isotopes in a sample, scientists can calculate the amount of time that has passed since the material was last heated or exposed to certain environmental conditions. Radiometric dating is a widely used technique in geology, archaeology, and other fields to determine the age of rocks, fossils, and other materials.
Learn more about Radiometric dating here:
https://brainly.com/question/14799339
#SPJ11
Water expands when it freezes.
A) True
B) False
Answer:
True
Explanation:
Water is one of the few exceptions to this behavior. When liquid water is cooled, it contracts like one would expect until a temperature of approximately 4 degrees Celsius is reached. After that, it expands slightly until it reaches the freezing point, and then when it freezes it expands by approximately 9%.
What is the process called when water freezes and expands?
Freeze-thaw occurs when water continually seeps into cracks, freezes and expands, eventually breaking the rock apart.
Hope this helps :)
Pls brainliest...
A(n) ________ is a common boundary where different parts of a system interact.
A)interface
B) delineation
C)sphere
D) geosphere
A(n) interface is a common boundary where different parts of a system interact.
What is interface?
Technology developers use interfaces as points of interaction between software and hardware components. Interfaces are tools and concepts.
Through an input-output system and specific protocols, they enable all system components to communicate with one another and function independently. It raises the abstraction levels.
An interface is a shared boundary between two or more components of a computer system over which information is exchanged in computing. The trade can be between programming, PC equipment, fringe gadgets, people, and blends of these.
Hence, option A)interface is correct.
To know more about interface visit -
brainly.com/question/32110640
#SPJ11
Repeat LIDAR surveys can be used to document the effect of hurricanes on barrier islands because ___________.
1. Erosion can be measured
2. Houses can be located
3. Sedimentation can be measured
Repeat LIDAR surveys can be used to document the effect of hurricanes on barrier islands because they enable the measurement of erosion and sedimentation. The correct option is 1 and 3.
By conducting LIDAR surveys before and after a hurricane, scientists can assess the extent of erosion by comparing the changes in the topography of the island.
This allows them to determine the areas most affected by the hurricane and the magnitude of the erosion. Similarly, sedimentation can be measured by observing the deposition of sediments in different locations on the island.
These measurements help to understand the overall impact of hurricanes on barrier islands and inform strategies for their preservation. Although LIDAR can also be used to locate houses, this aspect is less relevant to documenting the effects of hurricanes on the islands themselves.
To know more about hurricanes refer here:
https://brainly.com/question/23906921#
#SPJ11
Natural capital is defined as all of Earth's resources that are necessary to produce ________.
A) the ecosystem services that we depend on
B) a profit
C) a sustainable market
D) environmental justice for all
E) a safe habitat for endangered species
All of the resources on Earth that are required to create the ecosystem services on which we rely are referred to as natural capital. Therefore, choice A is the best one.
The term "natural capital" refers to all of the Earth's resources, including as its minerals, biodiversity, air, water, and land, as well as the ecosystem services those resources sustain that are essential to human survival and well-being.
These cover a wide range of activities, such as pollination, healthy soil, clean air and water, and climate regulation.
The concept of "natural capital" underlines the value of ecosystem services as well as the necessity of their sustainable management.
For such more question on ecosystem:
https://brainly.com/question/27950035
#SPJ11
The type of ocean current that is driven by differences in temperature and salinity is a ________ circulation.
A) thermohaline
B) gyre
C) Coriolis effect
D) Hadley cell
E) Ferrel cell
The a) thermohaline circulation, also known as the ocean conveyor belt, is driven by differences in temperature and salinity.
In areas where water is cold as well as salty, it sinks to the bottom and begins to circulate around the globe, while warm and less salty water rises to the surface.
This circulation plays a crucial role in regulating global climate and distributing nutrients throughout the ocean. The conclusion would emphasize the importance of understanding as well as monitoring thermohaline circulation in order to better understand and address the impacts of climate change.
To know more about thermohaline circulation visit:
https://brainly.com/question/29451664
#SPJ11
How would you know when you left on region and entered another?
Answer:
When you cross a boundary line between two regions, you will have left one region and entered another. The boundary line is typically a curve or a line that separates the two regions. You can identify the boundary line by looking at the equation of the function that defines the regions. The boundary line will be the set of points where the equation is true for both regions. For example, if the equation is y = x² and the two regions are above and below the x-axis, then the boundary line is the x-axis itself, since it is the set of points where y = 0 for both regions. When you cross the x-axis, you will have left one region and entered the other.
Explanation: