What is a non-proton

According to boyle's law

PV = constant

According to kinetic molecular theory of gases Boyle's law :

When molecules collide they create pressure. When the molecules are closer together they collide more frequently. Hence more volume less collisions less pressure.

To know more about  Kinetic theory   visit : https://brainly.com/question/14349214

#SPJ4

Polarity of water is responsible for the versatility of water as a solvent.

Water is a molecule that is composed of hydrogen and oxygen. The compound is polar because if the high electronegativity difference that exists between hydrogen and oxygen.

As a result of this polarity, a permanent dipole moment exists between the molecules of hydrogen. This is a strong dipole that makes the molecules of water to aggregate together. This strong dipole that exists in water is what we call the hydrogen bond.

Now the hydrogen bond makes water to have a high surface tension and high boiling point. It also accounts for the differences in the solid and the liquid states of water.

As such, the polarity of water is responsible for the versatility of water as a solvent.

Learn more about water:https://brainly.com/question/28465561

#SPJ1

If a sodium hydroxide solution were added to a solution containing lead(ii) ions, sodium ions, nickel(ii) ions, and potassium ions then the  ion which  would remain in the supernatant are potassium ions and sodium ions

Supernatant means clear liquid overlying material deposited by settling, precipitation and centrifugation called as supernatant. so here in the solution of sodium hydroxide means in naoh solution added lead(ii) ions, sodium ions, nickel(ii) ions, and potassium ions in that solution potassium ions and sodium ions are deposited by settling down and making precipitation that's why in this solution of naoh potassium ions and sodium ions are remain in the supernatant.

Know more about supernatant in the solution of naoh

https://brainly.com/question/28537252

#SPJ4

The w/w % of an aqueous solution of ammonia is 27.01%.

w/w % or "weight by weight" is the proportion of a particular substance within a mixture, measured by weight or mass.

c(NH₃) = 14.3 M; concentration of ammonia solution

d(NH₃) = 0.900 g/mL; density of ammonia solution

V(NH₃) = 100 mL = 0.1 L; chosen volume of ammonia solution

M(NH₃) = 17 g/mol; molar mass of ammonia

ms(NH₃) = d(NH₃) × V(NH₃)

ms(NH₃) = 0.900 g/mL × 100 mL

ms(NH₃) = 90 g; mass of ammonia solution

m(NH₃) = c(NH₃) × V(NH₃) × M(NH₃)

m(NH₃) = 14.3 M × 0.1 L × 17 g/mol

m(NH₃) = 23.31 g; mass of pure ammonia (solute)

w/w % = m(solute) / m(solution) × 100%; formula to calculate w/w %

w/w % = 23.31 g / 90 g × 100%

w/w % = 27.01%

More about solution: brainly.com/question/24881505

#SPJ4

262 nanometers would be a longest potential wavelength that would even eject a photoelectron from silver and this is shorter than the lower limit of the visible range which is about 380 nanometers so it is ultraviolet light.

The longest-wavelength light that generates an electron to be ejected from a gaseous lithium atom is 520 nm. Gaseous lithium atoms are illuminated with light of wavelength 400 nm.

Violet light of wavelength 400 nm discharges electrons with a maximum kinetic energy of 0.860 eV from sodium metal.

To learn more about the longest wavelength  visit the link

https://brainly.com/question/20564746

#SPJ4

The functional groups in daumone;

- alcohol

- ether

- carboxylic acid

A functional group is an atom, group of atoms or bond that is responsible for the chemical reactivity of the members of a homologous series. The homologous series refers to a family of compounds that have similar reactivity.

We know that organic molecule are almost always known to contain carbon. The functional groups in the molecule could help us to know the kind of reactions that could occur in the molecule since the reactions could only occur at the functional groups in the molecule as shown.

Let us now consider the compound daumone which has been found to be responsible for the hibernation of worms. The functional groups in the molecule are;

- alcohol

- ether

- carboxylic acid

These are the known functional groups that we can see in the molecule as shown above in the question.

Learn more about functional groups:https://brainly.com/question/14618322

#SPJ1

If a cell culture has 3 x 105 cells per ml , and the culture flasks hold 75 ml of culture each and you have 12 flasks, The bond between K⁺ and Cl⁻ ions is an ionic bond.

The main contact that takes place in ionic compounds is called ionic bonding, and it involves the electrostatic attraction between two atoms or ions with dramatically differing electronegativities. Along with covalent and metallic bonds, it is one of the most prevalent types of bonds. Ions are atoms, or collections of atoms, that have an electrical charge. Ions with a negative charge are produced by gaining electrons in atoms (called anions). Ions with a positive charge are created when atoms lose their electrons (called cations).

Electrovalence, as opposed to covalence, is the name for this transfer of electrons. The cation is a metal atom in the most straightforward scenario, while the anion is a nonmetal atom, however these ions can have more complex chemical compositions.

To learn more about ionic bond from the given link:

https://brainly.com/question/957239

#SPJ4

atomic weights 5.91 g of sulfuric acid is S-32 O-16 Al-27 H-1

What is aluminum sulfate?

Aluminum sulfate is the most widely used aluminum coagulant.  it's available in a number of solid forms such as block, kibbled, or ground and is additionally available as a solution.

Aluminum sulfate is the most widely used aluminum coagulant.  it's available in a number of solid forms such as block, kibbled, or ground and is additionally available as a solution.

aluminium sulfate 250g= 2.55 mol  (250/98)

3Al +  2H2SO4 --------->  Al2(SO4)3 + 2H2

therefore two parts of vitriol produce one part of aluminum sulfate.

2.55mol /2 =1.275 mol  1.275mols of aluminum sulfate is produced.  

1.275 mol s multiplied by aluminum sulfate's molar mass (342g/mol) gives its mass in grams.

What are atomic weights S-32 O-16 Al-27 H-1

aluminium sulfate 250g= 2.55 mol  (250/98)

3Al +  2H2SO4 --------->  Al2(SO4)3 + 2H2

therefore two parts of vitriol produce one part of aluminum sulfate.

2.55mol /2 =1.275 mol  1.275mols of aluminum sulfate is produced.  

1.275mol s multiplied by aluminum sulfate's molar mass (342g/mol) gives its mass in grams.

To know more about aluminum sulfate go to the given link :

https://brainly.com/question/28299913

#SPJ4

Energy is the ability to do work and kinetic energy is energy in motion.

Our aim in an experiment is to determine the effect of one variable on another. The independent variable is the variable that is manipulated in the experiment while the dependent variable is the variable that changes as we manipulate the independent variable.

We now have to ask ourselves what is manipulated and what changes as we manipulate that variable. Every experiment must have these dependent and independent variables. Here, we need to find out the independent variable and dependent variables in any chosen any problems.

For instance, I want to measure the effect of fertilizer on plant growth. Plant growth is the dependent variable while fertilizer application is the independent variable.

A possible hypothesis is; if fertilizer is applied to the plant, the plant grows better.

Energy is the ability to do work and kinetic energy is energy in motion.

Learn more about energy:https://brainly.com/question/1932868

#SPJ1

I Will  spill a corrosive substance on my skin or clothing, wash it off with plenty of water for 15 minutes. Use the safety shower if i were exposed to a large HCl

What do you have to do if you spill hydrochloric acid?

Acid spills should be neutralized with bicarbonate of soda and then cleaned up with a paper towel or sponge. don't use a strong base, like sodium hydroxide, to neutralize a robust acid like hydrochloric acid. The bicarbonate of soda will do the job with much less chance of injury

How should an acid spill be cleaned up?

Acids are often neutralized with soda ash or sodium bicarbonate whereas bases can be neutralized with citric acid or ascorbic acid. Following neutralization, the pH of the spill should be checked to make sure that the spill has been neutralized

Why does one have to immediately clean up any HCl spill?

Spills of acid or sulfuric acid can lead to significant contamination of the environment if not handled quickly and properly. DEQ's goal is to wash up spills within 72 hours of an incident

Learn more about hydrochloric acid :

brainly.com/question/24586675

#SPJ4

Half life of the substance will be 0.152a

Half life formula:

Nₜ= Noe⁽⁻λᵗ⁾

Nₜ= substance leftover

No = initial concentration

λ = decay constant

Nₜ= 95

No = 100

t = 1

So, putting values in the above equation

95 = 100e⁽⁻λ⁾ .1

e^-λ = 95/100

ln e⁽⁻λ⁾ = ln(95/100)

find out the value of lambda

λ = ln( 0.95) = 4.55/a

t₍ₕₐₗf₎ = 0.693/ λ

Put the value of lamba in this equation

t₍ₕₐₗf₎ = 0.693 / 4.55

= 0.152a

Therefore, half life of the a sample of a radioactive substance decayed to 95% of its original amount after a year is 0.152a

Learn more about Half life here:

https://brainly.com/question/11152793

#SPJ4

Answer: Lithium has the least mass.

Explanation: Period 2 of the Periodic Table includes the following elements:

• Carbon

• Nitrogen

• boron

• Lithium

• beryllium

• Neon

• oxygen

• fluorine

Clarification

Out of these elements, lithium has the least mass, which is 6.941 units. The element with the most mass on the other hand is neon, which has a mass of approximately 20.1797 units.

Final answer: The element in Period 2 of the Periodic Table with the least mass is lithium.

Through an unprecedented coupling of aryl iodides and methyl ketones in the presence of silver triflate, these complexes with distinctive catalytic activity enable the quick synthesis of 1,3-disubstituted naphthalenes.

What is the process of naphthalene synthesis?

A methyl ketone is first arylated on a Pd catalyst, and then it is cyclized with a second equivalent of a ketone to complete the transition. This ketone arylation process is significant since it takes place in oxidizing circumstances, which points to the use of dimeric Pd catalysts with greater oxidation states.

The mechanism involving Pd(III) bimetallic catalysis at a high oxidation state on the basis of measurements and DFT calculations. We confirm the significance of the palladium catalyst for both arylation and cyclization for naphthalene production because these new bimetallic complexes exhibit reactivity that is not seen with monometallic Pd catalysts.

To learn more about naphthalene synthesis click the given link

https://brainly.com/question/14770153

#SPJ4

Answer: Human evolution is the lengthy process of change by which people originated from apelike ancestors. Scientific evidence shows that the physical and behavioral traits shared by all people originated from apelike ancestors and evolved over a period of approximately six million years

Explanation:

sp³-sp³ type of bonds best describes the bond between the adjacent oxygen.

An atomic orbital is a function that describes the position and wave-like activity of an electron in an atom in terms of both atomic theory and quantum mechanics. This function may be used to determine the likelihood of discovering any atom's electron in any certain area surrounding the nucleus.

The electron cloud model is used by chemists to map out the electrons' atomic orbitals; these probability maps are not all spherical. The periodic table's trends can be predicted in part by their forms.

to learn more about orbitals go to -

https://brainly.com/question/26000020

#SPJ4

The least amount of energy necessary to liberate the most loosely bound electron from an isolated gaseous atom, positive ion, or molecule is known as the ionization energy.

Which atom has the highest ionization energy?

Se (Ionization energy 97542) has the highest out of Potassium, Zinc and Calcium.

A chemical element with the atomic number 34 and the symbol Se is selenium. It is a nonmetal (occasionally referred to as a metalloid) that shares characteristics with arsenic and has features halfway between sulfur and tellurium in the periodic table. In the crust of the Earth, it hardly ever exists in either its elemental state or as pure ore complexes.

The energy required to remove one mole of electrons from an atom and produce a positively charged selenium ion is known as the ionization of selenium energy.

Se -> Se+ + e-

Although this procedure can be performed numerous times, the energy cost rises sharply each time. The selenium's general equation is:

SeN+ -> Se(N+1)+ + e-

To know further information about ionization energy, click on the link below:

https://brainly.com/question/20275162

#SPJ9

The ph must be close to neutral for phospholipids to spontaneously form bilayers in an aquatic environment.

What is phospholipid bilayer?

Important elements of cell membranes are phospholipid bilayers. A barrier preventing molecules and ions from entering and leaving the cell is the lipid bilayer. The ability to selectively permit the passage of specific molecules into and out of cells, however, is a crucial function of the cell membrane.

A polar membrane that has two layers of lipid molecules makes up the lipid bilayer. All cells are surrounded by these membranes, which are flat sheets.

To learn more about phospholipid bilayer click the given link

https://brainly.com/question/14445282

#SPJ4

Chiswick house was designed by Richard Boyle, better known as Lord Burlington to reflect the style of the ancient Greeks and Romans.

In the Chiswick neighborhood of London, England, stands Chiswick House, a Neo-Palladian villa. The home, a "glorious" example of Neo-Palladian construction in west London, was planned and constructed in 1729 by Richard Boyle, 3rd Earl of Burlington (1694-1753). 26.33 hectares are taken up by the house and garden (65.1 acres). One of the first examples of an English landscape garden, the garden was primarily designed by architect and landscape designer William Kent.

The Cavendish family rented out the property as it fell into disrepair in the 19th century. Starting in 1892, it served as the Chiswick Asylum, a psychiatric hospital.

Learn more about Neo-Palladian here:-

https://brainly.com/question/28137515

#SPJ4

For units of volume: 1 milliliter is about the volume of a raindrop. 1 cup is about the volume of a school milk carton.

The volume occupied by an object in three dimensions is calculated. It is often quantified mathematically using SI-derived units, such as the cubic meter and liter, or other imperial measures (such as the gallon, quart, cubic inch). The definitions of volume and length have a connection (cubed). Usually, the volume of a container is thought of as its capacity, or the amount of fluid (gas or liquid) that it could hold, rather than the amount of space the container takes up.

Ancient societies used standardized containers, which were later formed from naturally occurring containers, to compute volume. Several three-dimensional shapes have simple mathematical formulas that can be used to calculate their volumes.

To learn more about volume from the given link:

https://brainly.com/question/23916892

#SPJ4

Precipitate of SrSO₄ forms in the reaction of SrNO₃(aq) and K₂SO₄(aq) .

Possible pairs of reaction are below.

CsI(aq)+NaOH(aq) → CsOH(aq) + NaI (aq) :: No precipitate

2HCl(aq)+Ca(OH)₂(aq) → CaCl₂(aq) + 2H₂O(l) :: No precipitate

K₂SO₄(aq)+Sr(NO₃)₂(aq) → SrSO₄(s) + 2KNO₃(aq) :: Precipitate of SrSO₄ forms.

NaNO₃(aq)+NH₄Cl(aq) → NaCl (aq) + NH₄NO₃(aq) :: No precipitate

Here, the double-displacement reaction takes place between potassium sulfate and Strontium nitrate, both compounds are very soluble in water. The end products in the reaction are potassium nitrate and Strontium sulfate.

By remembering the solubility rules of nitrates, we infer that all nitrates are soluble.

Here, Potassium sulphate is also soluble, and the solubility rule for sulfates indicates that Strontium sulfate(SrSO₄) is insoluble. Hence, it will precipitate from solution.

To learn more about Double displacement reaction, refer this link

https://brainly.com/question/23918356

#SPJ4

The correct diagram is W.

A diagram is often a -dimensional display that communicates the use of visual relationships. it is a simplified and dependent visual representation of ideas, ideas, buildings, family members, statistical records, anatomy, etc. it can be used for all elements of human activities to give an explanation for or illustrate a topic. example Diagrams are graphics that show a photo, or photographs, accompanied with the aid of either note, labels, or a legend, which will explain principles or techniques. Describe gadgets or locations.

Display how matters paintings, circulate or change. assist provide extra perception into the issue displayed. A diagram is a drawing that suggests the distinctive parts of something and the way they work collectively. three-Line diagram is part of the detailed design document. Used for manipulating designing circuit diagrams, managing circuits, segment sequencing, differential relay placing, and metering transformer connection. A records chart is a sort of diagram or graph, that organizes and represents a set of numerical or qualitative information.

Learn more about Diagram here:-https://brainly.com/question/24713052

#SPJ9

This question probably pertains to an experiment called a double-slit interference experiment or a similar experiment. Let's say that slit 1 is closed and that we conduct the experiment with solitary electrons or photons.

Behind slit 2, we observe an incremental accumulation of hits in a non-interference pattern. Let's say we seal the slit. Behind slit 1, we can see the non-interference pattern. Let's now widen both slits. The impacts then create an interference pattern, as we can see. Note that (assuming it's a nearly flawless experiment with a very distinct interference pattern), there are specific locations termed "nodes" where NO electrons collide. The logical conclusion is that each individual electron "knows" that both slits are open when both are open, meaning that each electron effectively passes through both slits.

Learn more about interference here-

https://brainly.com/question/16098226

#SPJ4

The Ph = 10.3 and S = 8.287 x [tex]10^{-5}[/tex]

CaCO3 → Ca^+2 + [tex]CO_{3} ^{-2}[/tex]

Ksp = [Ca^+2] [ [tex]CO_{3} ^{-2}[/tex]] = s^2

We need to take into account the hydrolysis of carbonate ion with

K2 = 4.1 x [tex]10^{-11}[/tex]

H[tex]w_{3}^{-}[/tex] ⇄ H+ + [tex]w_{3}^{-2}[/tex]

K2 = [tex]\frac{[H+][CO_{3}^{-2}] }{[HW_{3}^{-}] }[/tex]

S = [tex]\sqrt{Ksp}[/tex]

S = [tex][Ca^{+2}] = [CO_{3}^{-2}] + [HW_{3}^{-}][/tex]

On putting the values, we will get

[tex][Ca^{+2}] = [CO_{3}^{-2}] +(1+ \frac{H^{+} }{K_{2} })[/tex]

S^2 = Ksp (1 + [tex](1+ \frac{H^{+} }{K_{2} })[/tex])

S = [tex]\sqrt{ Ksp (1+ \frac{H^{+} }{K_{2} })}[/tex]

at Ph = 6.3

[H+] = 5.011 x [tex]10^{-7}[/tex]

S = [tex]\sqrt{3.36 * 10^{-9} * (1+\frac{5.011*10^{-11} }{4.8*10^{-11} }) }[/tex]

S = 5.92 x [tex]10^{-3}[/tex]

at Ph = 10.3

[H+] = 5.011 x [tex]10^{-11}[/tex]

S = [tex]\sqrt{3.36 * 10^{-9} * (1+\frac{5.011*10^{-11} }{4.8*10^{-11} }) }[/tex]

S = 8.287 x [tex]10^{-5}[/tex]

To know more about solubility, visit:

https://brainly.com/question/8591226

#SPJ4

The distance from the thermal energy source affect the amount of thermal energy transfer occurring in a substance in a way that area that the radiation is spread over is four times as large for just the double distance.

Thermal energy that can transfer between substances always does so from one that is warmer to one that is cooler. Conduction, convention, and radiation are the three categories. Distance causes the heat radiation emitted by a source, such the sun, to disperse.

As it moves away from the source, the same quantity of energy is dispersed over a larger and larger sphere every second. For simply the twice distance, the radiation's distribution area is four times as large.

The solar constant (also known as the solar coefficient), abbreviated S, refers to the Sun's intensity on Earth, [tex]W/m^{2}[/tex], in units. This information reveals how much radiation enters a square metre of Earth (or any other planet at a similar distance from the sun).

Learn more about radiation here;

https://brainly.com/question/1497235

#SPJ4

From concentrated (18 M) sulfuric acid [H2SO4]

To prepare the solution, we dilute 33 mL of 18 M sulfuric acid to 1.00 L.

Molarity (M) = moles solute / Liter solution  

Mass%  = mass solute / mass solution×100

We can calculate the amount of 18 M sulfuric acid that needs to be diluted to 1.000 L from a concentrated solution using the dilution method. When determining the volume of 18 M sulfuric acid required, we arrive at

      V1C1 = V2C2

      V1 = (0.60M H2SO4) (1L) / (18M H2SO4)

      V1 = 0.033L = 33mL

To prepare the solution, we dilute 33 mL of 18 M sulfuric acid to 1.00 L.

A substance's molarity (M) is the volume of solution in which it is present. The amount of a solute in moles per liter of a solution is known as molarity. A solution's molar concentration is another name for molarity.

To learn more about molarity click the given link

https://brainly.com/question/14469428

#SPJ4

The specific gravity of the mixture is 0.89.

Antifreeze volume = 4.5L

Specific gravity of antifreeze = 0.80

Water volume = 3.8L

Specific gravity of water = 1

Specific gravity of the mixture =

(volume of water * water specific gravity + volume of antifreeze * antifreeze sg) / volume of mixture

      = (3.8 * 1 + 4.5 * 0.80) / 8.3

      = 0.89

A measurement of a substance's density in relation to water's density is its specific gravity, which is more officially known as relative density. In general, specific gravity is calculated for solids and liquids in respect to water in its densest condition (at a temperature of 4 Celsius or 39.2 Fahrenheit), and for gases in relation to air at room temperature.

To learn more about specific gravity click the link

https://brainly.com/question/543765

#SPJ4

The answer for the particular question is probability and Schrodinger wave function.

The correct question would be :

an atomic orbital defines the __________ of finding an electron in a specific region of an atom. this electron density is referred by the square of the Schrodinger __________ function.

An atomic orbital is 3d structure where electrons are moving.

The Schrodinger wave equation connects the energy of an atom to its electrons with regard to the wave function of the electron. Each solution to the equation indicate an permits energy state of the atom and is connected with a specific atomic orbital.

To know more about Schrodinger Wave Equation here :

https://brainly.com/question/15096260?referrer=searchResults

#SPJ4

Answer:

Create a solution of chloride water and add a colouless solution of potassium iodide... The mixture will turn red-brown because iodine has been displaced proving that it is less reactive than chlorine

Cl2 (aq) + 2KI (aq) --> 2KCl (aq) + I2 (aq)

The mass expression for the system is K= (aH₂)² × aO₂ / (aH₂O)² = 5.31× 10⁻¹⁰.

we may derive mass action expression out from equation above,

K= (aH₂)² × aO₂ / (aH₂O)² = 5.31× 10⁻¹⁰.

An equation that compares the product activities increased towards the power of its coefficients to the reactant activity increased to the power of its coefficients is known as the mass action expression.

To know more about mass action expression visit:

https://brainly.com/question/15167758

#SPJ4