What is a concept or principle from the natural sciences that is relevant to John Snow's work on Aesthetics?

A. None are correct.

Explanation:

Proton has positive charge and mass too.

A neutron is chargeless and has mass as well.

An electron has negative charge and has mass.

The atomic number of carbon is 6.

Hence none are correct.

An increase in the concentrations of greenhouse gases in Earth's atmosphere would cause an increase in the average temperatures on Earth's surface.

The greenhouse effect occurs when gases build up in the upper atmosphere of the Earth, where they absorb solar heat and trap it. Thus, the heat that ought to be fleeing into space is being held back on Earth. The following gases contribute to this effect:

with a ton more. However, the greenhouse effect is mostly caused by them. By retaining heat in the lower (rather than upper) atmosphere, this action will raise temperatures on the surface of the globe.

Heat from the sun would be trapped on Earth as the concentration of greenhouse gases (such the ones described) in the atmosphere increased, resulting in an increase in the global temperature.

Learn more about greenhouse gases here;

https://brainly.com/question/20558707

#SPJ9

The volume of the liquid sodium is 121.64 L

The density of a substance is simply defined as the mass of the subtance per unit volume of the substance. Mathematically, it can be expressed as

Density = mass / volume

With the above formula, we can obtain the volume of the liquid. Details below

Density = mass / volume

Thus,

Volume = mass / density

Volume of liquid = 1.13×10⁵ / 0.929

Volume of liquid = 121636.17 cm³

Divide by 1000 to express in liter

Volume of liquid = 121636.17 / 1000

Volume of liquid = 121.64 L

Learn more about density:

https://brainly.com/question/952755

#SPJ1

Answer: A) Delta

Explanation:

A river delta is a landform shaped like a triangle, created by deposition of sediment that is carried by a river and enters slower-moving or stagnant water. This occurs where a river enters an ocean, sea, estuary, lake, reservoir, or another river that cannot carry away the supplied sediment.

Hope this helped!

All molecules are not compounds. Option C.

A compound is a substance made from two or more atoms of different elements that are linked together by bonds. The bond could be an ionic, covalent, metallic, or hydrogen bond.

A molecule, on the other hand, is a group of atoms, the same or different, chemically bonded together and represents the smallest fundamental unit that can participate in chemical reactions.

Going by these two definitions, one can conclude that while all compounds are molecules, not all molecules are compounds. If the group of atoms that bond together is chemically identical, a molecule is formed but not a compound.

More on compounds can be found here: https://brainly.com/question/13516179

#SPJ1

Matter can change state when thermal energy is absorbed into or out of the body.

Changing states of matter occur when matter loses or absorbs thermal energy. When a substance absorbs energy, the atoms and molecules move more fast which increases kinetic energy of the atoms that pushes particles far enough from each other which resulted in the change of form. This energy which changes the state of matter is the heat or thermal energy. We know that thermal energy increases kinetic energy so that's why the heat energy changes state of matter.

So we can conclude that Matter can change state when thermal energy is absorbed into or out of the body.

Learn more about energy here: https://brainly.com/question/13881533

#SPJ1

Answer:

Na+e-1=Na

Explanation:

dfh low so to homework all no lol Show

Heat capacity when 47.0 J of heat is added to 13.0 g of a liquid, its temperature rises by 1.71 ∘C is 22.23 J/ ∘C g .

from the above statement we have got

Q = 47.0 J

MASS =  13.0 g

temperature (T) = 1.71 ∘C

heat capacity ( c ) = ?

NOW, from the formulae , Q = mcΔt

put all the values given in equation

47.0 J =  13.0 g [tex]\times[/tex] c [tex]\times[/tex]1.71 ∘C

c = 47.0 ÷ 13.0[tex]\times[/tex]1.71

c = 47/22

c = 22.23 J/ ∘C g

To know more about heat  capacity visit :

https://brainly.com/question/28302909

#SPJ9

Based on the information below . The atoms of the same element are Atom A and Atom C .

Atoms of same element have the same atomic number. so the number of protons and electron are same but they have different atomic masses called as Isotopes.  so, the atoms having different number of neutron will have different masses.

In the given case ,

Atom A               Atom B             Atom C

8 protons           10 protons        8 protons

8 neutrons         10 neutrons       10 neutrons

8 electrons         10 electrons      8 electrons

so, In Atom A  and Atom C , the number of protons and electrons are same but  the have different atomic masses means having different no. of neutrons. so Atom A and Atom C are the atoms of same elements.

Hence,Based on the information below . The atoms of the same element are Atom A and Atom C.

To learn more about Atoms and Elements here

https://brainly.com/question/15173445

#SPJ1

The percentage atom economy is 62%

2NH3 + H₂SO4 → (NH4)2SO4

34 gram 98 gram 210 gram

2 mol 1 mol 1 mol

% atom economy = mass of atoms in desired product/total mass of atom in Product x 100

% atom economy = 132/210 x 100 = 0.62 = 62%

The amount of desirable useful products produced from reactants is measured by atom economy, also known as atom efficiency. It is frequently expressed as a percentage and is referred to as percentage atom economy. The required product atoms are divided by the total number of reactants, which is equal to the total number of product atoms, to determine the percent atom economy

Higher atom economy reactions provide more of the desired product while producing less waste.

The following stages can be used as a generic method to compute the atom economy:

Determine the atom economy percentage.

Hence, percentage atom economy is 62%

Learn more about Atom economy here:

https://brainly.com/question/17159753

#SPJ9

The  moisture must be removed from air feeding pneumatic controls because moisture corrodes the walls of an air cylinder, dilutes the oil needed for the head and rod, and reduces reaction time.

What is the mechanism of a pneumatic controller?

A pneumatic controller is a mechanical apparatus created to gauge temperature or pressure and send a corrective air signal to the last control element. The heat or pressure sensing system and the air signal relay system work together to power a pneumatic controller.

Moisture corrodes the walls, dilutes the oil needed for an air cylinder's head and rod, and slows reaction time. Efficiency and output are lost as a result. Rubber valve diaphragms may harden and rupture if moisture is allowed to get to them. Spools and pistons can develop pits as a result of moisture.

To learn more about Moisture  click on the link below:

https://brainly.com/question/25534416

#SPJ1

Answer:

in the middle region of the periodic table, where the transition metals are

aka between Group II and III

Answer: As you move down the column in the periodic table the ionic charge increases.

Explanation: This is because the effective nuclear charge (Z_sub_eff) provides a shielding constant so that the nuclear charge from the protons cannot interfere with the negative nuclear force of the electrons.

Yes, ionic charge patterns exist. Elements in the same group often share similar charges due to common valence electron configurations.

Indeed, a pattern emerges in terms of ionic charges within the periodic table. Elements within the same group (vertical columns) often exhibit similar ionic charges due to sharing common valence electron configurations.

For instance, Group 1 elements tend to form +1 cations (e.g., Na⁺, K⁺) by losing their single valence electron, while Group 2 elements form +2 cations (e.g., Mg²⁺, Ca²⁺) by losing two valence electrons. Similarly, elements in Group 17, known as halogens, commonly form -1 anions (e.g., F⁻, Cl⁻) by gaining one electron to achieve a stable electron configuration.

This recurring trend can be attributed to the desire of atoms to achieve a full valence shell, either by losing or gaining electrons, leading to predictable ionic charges within specific groups of elements.

To learn more about electron configurations  here

https://brainly.com/question/13497372

#SPJ3

1.0 mol of K₂ Cr₂07 contains 2 mol K, 2 mol per 7 mol 0.

One mole of atoms of any element carries 6.022 X 1023 atoms, regardless of the kind of detail. Use the periodic table to determine the molar mass of the element. Divide the given mass in grams by the molar mass to locate the range of moles. Multiply the number of moles via Avogadro's wide variety to attain the variety of atoms. There are 24 atoms in a single molecule of C6 H12 06. This chemical compound has 6 atoms of carbon, 12 atoms of hydrogen, and six atoms of oxygen. this is a total of 24 atoms.

The mole is the quantity of substance of a system that includes as many fundamental entities as there are atoms in zero. 012 kilogram of carbon 12 its symbol is mol To discover the number of moles in a sample, simply weigh it and divide the weight by way of the molecular weight. The quotient is equal to the variety of moles. The number of atoms or different particles in a mole is the same for all substances divided by the mass of the substance in grams via its molecular weight. this could provide you with the range of moles of that substance that are inside the targeted mass.

Learn more about An atom here:-https://brainly.com/question/17545314

#SPJ9

The initial temperature of water is 47.8⁰C

Given,

mass of water is 2450g

absorbed heat is 5.35×105 J

we have to find out initial temperature

First Calculate the change in temperature when 5.35×10^5 J of heat is provided to 2450g of water.

q = m . c . ∆T

q is amount of heat gained

m is the mass of water

c is the specific heat of the substance

∆T is change in temperature

Specific heat of water is 4.18 J/g⁰C

∆T = q / m . c

= 5.35×10^5 / 2450 × 4.18

= 52.2⁰C

Now we know that the final temperature of the water is

100⁰C and that this final temperature is 52.2⁰C

is higher than the initial temperature of the water.

So by, ∆T = T(f) - T(i)

T(i) = T(f) - ∆T

T(i) = 100⁰C - 52.2⁰C

= 47.8⁰C

Therefore, initial temperature of water is 47.8⁰C

Learn more about specific heat here:

https://brainly.com/question/27991746

#SPJ9

Answer:

I'm worried about going to college and living in a dorm. I'm currently keeping in touch with my roommates to know what kind of people they are. Also, I'm starting to pack and get ready to move to my dorm.

Explanation:

Answer:

64.3 kilograms = 64300000 milligrams

Hope this helps :)

The average density in kilograms per litre of the crackers that measures 7.0cm X 17.0.cm X 19.0 cm is 0.1105Kg/L.

The density of a substance is a measure of the mass of matter contained by a unit volume. The density of a substance can be calculated using the following formula:

D = m/v

Where;

According to this question, a tightly packed box of crackers contains 250 g of crackers and measures 7.0cm X 17.0.cm X 19.0 cm.

Volume = 7.0cm X 17.0.cm X 19.0 cm = 2261cm³

1 cubic centimetre = 0.001 litre

2261cm³ = 2.261L

Density of the crackers = 0.25kg ÷ 2.261L

Density = 0.1105Kg/L

Therefore, the average density in kilograms per litre of the crackers that measures 7.0cm X 17.0.cm X 19.0 cm is 0.1105Kg/L.

Learn more about density at; https://brainly.com/question/6107689

#SPJ1

The final propagated error on the density is +/-0.02g/mL

The density is the amount of a specific material per unit volume. d = M/V, where d is density, M is mass, and V is volume, is the formula for density. Grams per centimeter are a common measurement unit used for density.

The relationship between mass and volume can be easily determined using density; for instance, the mass of a body is equal to its volume multiplied by the density (M = Vd), whereas the volume is equal to the mass divided by the density (V = M/d). By multiplying a body's mass by the acceleration of gravity, one can get the weight of the object, which is usually more important practically than its mass.

To learn more about density please visit-
https://brainly.com/question/6838128
#SPJ9

To check the protein in the drink the test carried out is Biuret Test

What is Biuret Test?

The chemical test known as the "Biuret test" uses the Biuret reagents to produce the compound known as "Biuret," which is created by heating urea to 180 °C. A 1% solution of Copper II sulphate is used in the test  

([tex]CuSO_{4}[/tex]). The peptide bonds found in proteins create a compound with the [tex]Cu^{2+}[/tex] in the Biuret reagent. This test therefore aids in identifying peptide bonds in any substance.

The reagent in the biuret test does not really include biuret; however, the test's name derives from the fact that the peptide-like linkages in the biuret molecule produced a favorable reaction.

Two of the many more sophisticated variations of the biuret test are the Lowry test and the BCA test.

To learn more about Biuret Test

brainly.com/question/1412997

#SPJ9

Answer:

The victim has been dead for approximately 12 hours.

Explanation:

Algor mortis, or the cooling of the body after death, is a reliable way to estimate time of death. The average body temperature is 98.6 degrees Fahrenheit, so 85.2 degrees Fahrenheit would be 12 hours after death.

Zara is examining some animal cells on a slide using a microscope. She is aware that there are animal cells on the slide, but she is unable to see any cells when using the microscope. Give three reasons why Zara might not be able to notice any cells.

Understanding organelles has been greatly aided by microscopes. Most organelles cannot be seen using a light microscope, and those that can (such as the nucleus, mitochondria, and Golgi) cannot be studied in detail because of their size, which is near to the light microscope's resolution limit.

The other cell organelles are too tiny and do not adhere to the dye to be visible under a lab microscope.

Learn more about microscope here:
https://brainly.com/question/18661784

#SPJ9

The mass of antifreeze required to fill a 2.5 gallon car radiator is

Since, 1 gallon = 3.785 L

2.5 gallon = 9.4625 L

Given,

Gasoline = 9.4625 L x 1000 mL/L

               = 9462.5 mL

Density = 0.79 g/mL

Mass = Density  x volume                                                (density =  mass   )

Mass = 0.79 g/mL x 9462.5 mL                                                         volume              

Mass = 7475.37 g

Therefore,

Mass of antifreeze, in grams = 7475.37 g

To learn more about antifreeze,

brainly.com/question/2770534

#SPJ1

To separate a mixture of hard candies and marbles, the most efficient method would be filtration .

A mixture is just the physical mixing of a mixture's constituent parts, including suspensions and colloids, that maintain their identities and are thus combined in the necessary proportions.

One or more sweetener syrups are heated to 160°C to create a sugar confection known as a hard candies , often referred to as a boiled sweet.

To avoid damaging the water pipes, boil the candies if marbles are present unless they dissolve in water. Then, place a filter in the sink and run cold water for two minutes when pouring the water into the strainer and after emptying it.

To know more about mixture and hard candies

brainly.com/question/24898889

#SPJ1

Answer:

The Bio chemist would study how fast nitrogen and hydrogen form ammonia.

Explanation:

In the image given, the difference in the activation energy is observed on addition of a catalyst in the same reaction.

Activation energy is the minimum initial energy needed for a reaction to start. It is denoted as [tex]E_a[/tex].

a) The difference between the reactions is that on addition of a catalyst, the activation energy is reduced to form the same product.

The similarity is that these peaks are basically the transition states where the energy is highest, and the reactant molecules are highly unstable and immediately get converted to the products.

b) Enzymes in the second reaction are the catalysts which increase the rate of the reaction and reduce the activation energy required for the reaction to happen. Not only do the enzymes reduce the activation energy, but they also introduce a multiple energy reaction pathway which must be fulfilled in order to form the products.

c) The second reaction is a multi-step reaction and occurs in a series of collisions, where each collision produces an intermediate molecule which collides further until the final product molecules are formed. Thus, each collision step has its own activation energy peak.

The original reaction has only one activation energy peak as the reactants collide once and form the products immediately thereby consuming a lot of energy.

Learn more about Activation energy here:

https://brainly.com/question/9967920

#SPJ9

Cows and other ruminants are significant producers of the greenhouse gas methane—contributing 37 percent of the methane emissions resulting from human activity.

Greenhouse gases (also known as GHGs) are gases in the earth's atmosphere that trap heat. During the day, the sun shines through the atmosphere, warming the earth's surface. At night, earth's surface cools, releasing heat back into the air. But some of the heat is trapped by the greenhouse gases in the atmosphere.

While carbon dioxide is typically painted as the bad boy of greenhouse gases, methane is roughly 30 times more potent as a heat-trapping gas. As temperatures rise, the relative increase of methane emissions will outpace that of carbon dioxide from these sources, the researchers report.

The cow's ramen is like a large fermentation vat. More than 200 different bacteria and 20 types of protozoa help the cow to utilize fibrous feed stuffs and non-protein nitrogen sources. Bacteria adhere to the feed and gradually digest the fermentable material.“You can probably reduce methane by about 20-25% by altering diet,” he says.

One study by researchers at the University of California, Davis, estimated it might be possible to reduce global methane emissions from cows by 15% by changing their diet.

Thus, this evidence support the passage.

To learn more about greenhouse gas, refer to below link:

https://brainly.com/question/4509458

#SPJ2

Answer:

Na

2

SO

4

.10H

2

O

=(2×23)+32+(4×16)+(10×18)

=46+32+64+180

=322

The volume of hydrogen needed to react with 5.00 L of oxygen based on the mole ratio is 10.00 L.

The volume of hydrogen gas is needed to react with 5.00 L of oxygen is determined from the mole ratio of the reactants as shown in the equation of reaction below:

Equation of reaction:  2 H₂ + O₂ → 2 H₂O

Mole ratio of hydrogen to oxygen = 2 : 1

Moles of gases occupies equal volume

Therefore, Volume ratio of hydrogen to Oxygen = 2 : 1

Volume of hydrogen needed to react with 5.00 L of oxygen = 5.00 * 2

Volume of hydrogen needed to react with 5.00 L of oxygen = 10.00 L

In conclusion, the volume of hydrogen required is obtained from the mole ratio of hydrogen and oxygen in the reaction.

Learn more mole volume of gas at: https://brainly.com/question/23826637

#SPJ1