Answer:
D. Oxidation
Explanation:
In an electrolytic cell, oxidation (the loss of electrons) takes place at the anode. At the cathode reduction takes place.
A mnemonic technique that could be used is that the process that starts with a vowel (Oxidation) takes place at the place that also starts with a vowel (Anode).
Which of the following is NOT a heterogenous mixture:
Salad
Beef Stew
Cereal in milk
Vinegar
Answer:Vinegar
Explanation:
Suppose that you take a sample of 500 g of ocean water and let the water evaporate. The mass of the remaining salts is 17 g. What was the salinity of the ocean water
Answer: The salinity of ocean water is 34 ppt.
Explanation:
Salinity is defined as the number of grams of salts present per kilogram of seawater. It is expressed in parts per thousand.
The formula used to calculate the salinity of ocean water or sea water is:
[tex]\text{ Parts per thousand}=\frac{\text{Mass of salts}}{\text{Mass of sea water}}\times 1000[/tex]
We are given:
Mass of salts = 17 g
Mass of sea water = 500 g
Putting values in above equation, we get:
[tex]\text{ Parts per thousand}=\frac{17g}{500g}\times 1000\\\\\text{ Parts per thousand}=34[/tex]
Hence, the salinity of ocean water is 34 ppt.
Investigate: Press Reset. Start with 2.000 moles of sulfur, then press Start. How many atoms do you think this amount represents
Answer:
1.204428 * 10^24 atoms
Explanation:
Number of moles = 2 mol
Number of atoms = ?
The relationship between moles and atoms is given by the avogadro's umber. This is the number of units in one mole of a substance. The units can be atoms, ions etc In this case it is atoms. The number is equal to 6.02214076 * 10^23
This means;
1 mol = 6.02214076 * 10^23
2 mol = x
Upon solving for x,
x = 2 * 6.02214076 * 10^23
x = 12.04428 * 10^23
x = 1.204428 * 10^24 atoms
Which of these factors are biotic? (SELECT ALL THAT APPLY.)
animals
light
minerals
water
plants
Answer:
plants
Explanation:
because it produces ( i am a third grade student and don't know if it is right or not)
Tell me this why don't water stop my mouth from burning but milk or malk does this s for 32 points
Answer:
water spreads the spicy taste around your mouth, while milk does not and it helps the hot taste go away.
Explanation:
Answer:
water makes ur mouth burn more but milk it helps bc of what's in it
How many atoms are in 1 mole of water, H2O?
Answer:
1.807×10and at the top of ten put -24
(4) NH3+02- NO+H2O
balance the equation
Answer:
4NH₃ + 5O₂ —> 4NO + 6H₂O
Explanation:
NH₃ + O₂ —> NO + H₂O
The above equation can be balance as follow:
NH₃ + O₂ —> NO + H₂O
There 3 atoms of H on the left side and 2 atoms on the right side. It can be balance by 4 in front of NH₃ and 6 in front of H₂O as shown below:
4NH₃ + O₂ —> NO + 6H₂O
There are 4 atoms of N on the left side and 1 atom on the right side. It can be balance by putting 4 in front of NO as shown below:
4NH₃ + O₂ —> 4NO + 6H₂O
There are 2 atoms of O on the left side and a total of 10 atoms on the right side. It can be balance by putting 5 in front of O₂ as shown below:
4NH₃ + 5O₂ —> 4NO + 6H₂O
Thus, the equation is balanced.
What is one way in which sound and light are alike? PLEASE HELP IF YOU WANT BRAINLEIST AND TO HAVE YOUR COMMENT LIKED!!
A. They both travel easily through wood.
B. They are both types of energy.
C. both can travel through outer space.
D. They both make it easier for you to see what you are doing.
Answer:
They are both types of energy.
Explanation:
The last 2 are true for light, and the first one is true for sound.
Hope this is right, sorry if it is not.
The smallest unit of an element, which cannot be broken by any chemical means is called?
atom
compound
element unit
molecule
When baking soda and vinegar react, the surface bubbles. What does this most likely indicate?
a chemical change, because a precipitate is being formed
a chemical change, because a gas is being formed
a non chemical change, because a precipitate is being formed
a non-chemical change, because a gas is being formed
Answer: B
a chemical change, because a gas is being formed
Explanation:
Answer:
B
Mark Brainliest please
Explanation:
How many moles of NaHCO3 are there in a 3g tablet of Alka-Selzer?
Two inductors are connected in series to a 120 volt, 60 Hz line. The values are .75 H and 1.47 H. The total inductive reactance is
Answer:
837.02 ohms
Explanation:
Step one:
Given data
Frequency= 60Hz
L1= 0.75H
L2= 1.47H
When inductors are connected in series, the total inductance is the sum of the individual inductance
Step two:
Inductor 1
[tex]Xl1= 2\pi fL\\\\Xl1= 2*3.142*60*0.75\\\\Xl1= 282.78 ohms[/tex]
Inductor 2
[tex]Xl2= 2\pi fL\\\\Xl2= 2*3.142*60*1.47\\\\Xl2= 554.24 ohms[/tex]
The total inductance is
=282.78+554.24
=837.02 ohms
What is the number of electrons in an atom that has 26 protons and 30 neutrons?
Answer:
26
Explanation:
The number of electrons and protons are equal.
___C3H8 + ___O2 --> ___H2O + ___CO2
Answer:
C3H8 + 5O2 ‐‐‐‐‐‐‐‐> 4H2O + 3CO2
The combustion of propane (C3H8) creates water and CO2. Looking at the
reaction below, which of the following would be the mole ratio between propane
and carbon dioxide? *
C3H8 +502->4H2O + 3C02
A)3 mole CO2 / 5 mole C3H8
B)3 mole C3H8/4 mole CO2
C)3 mole CO2 / 1 mole C3H8
D)3 mole C3H8 / 1 mole CO2
Answer:
C)3 mole CO2 / 1 mole C3H8
Explanation:
Which symbol can be used to indicate the pressure at which a chemical reaction is carried out?
25°C
OA
2 atm
Pt
Answer:
2 atm
Explanation:
The symbol 'atm' is used for pressure. Hence, the symbol used to indicate the pressure at which a chemical reaction is carried out can be, 2 atm.
Give the IUPAC name for each compound.
Answer:
a. 1-fluoro-3,3,4-trimethyl-pentane.
b. 1-iodo-3-ethyl-2-methyl-hexane.
c. 1,3-dichloro-5-dimethyl-hexane.
d. 1-bromo-3-methyl-cyclopentane.
Explanation:
Hello!
In this case, according to the IUPAC rules for the listed alkyl halides, we first need to name the halogens (considering periodic order) then alkyl radicals and finally the parent chain; thus, the names are given below:
a. 1-fluoro-3,3,4-trimethyl-pentane.
b. 1-iodo-3-ethyl-2-methyl-hexane.
c. 1,3-dichloro-5-dimethyl-hexane.
d. 1-bromo-3-methyl-cyclopentane.
e. 5-chloro-1-bromo-1,1,5-trimethyl-pentane (radicals are not clear).
Best regards!
determine the molar mass for ammonia (NH3) in g/mol.
Answer:
17.031 g/mol
Explanation:
b. Potassium is more reactive than Sodium.
Answer:
Potassium is more reactive than sodium. Potassium is a bigger atom and has lesser ionisation energy than sodium so it is more reactive.
How does energy from Earth’s interior affect surface changes?
Answer:
Energy produced deep inside Earth heats rock in the mantle. ... As it becomes less dense, the heated rock rises toward Earth's surface. The cooler, denser rock surrounding the heated rock sinks, as Figure 5 shows. In this way, heat inside Earth moves toward the cooler crust.
Explanation:
do you like my og name
Energy from Earth’s interior affect surface changes due to:
Earth heat transport occurs by conduction, mantle convection, hydrothermal convection, and volcanic advection. Thus, about 99% of Earth's internal heat loss at the surface is by conduction through the crust, and mantle convection is the dominant control on heat transport from deep within the Earth.Tectonic processes and flow in Earth's interior drive deformation of Earth's surface that can lead to destructive earthquakes, tsunamis, and volcanic eruptions.Learn more:
brainly.com/question/25543134
Find the molar mass of C3H60
Answer:
The molar mass and molecular weight of C3H6O is 58.0791.
Explanation:
A 600. mL beaker has an inner diameter of 77.0 mm. What is the vertical distance between the 100. mL marks on the side of the beaker
Answer:
[tex]h=12.9cm[/tex]
Explanation:
Hello!
In this case, since we can consider the beaker until the 100-mL mark as a cylinder, we can use the following equation to relate its diameter, vertical distance or height and volume:
[tex]V=\pi h\frac{d^2}{4}[/tex]
Thus, since we know the diameter, volume (which is equivalent to 600 cm³) and π, we can plug in to obtain:
[tex]600cm^3=\pi *h*\frac{(77.0mm)^2}{4}[/tex]
It means it is necessary to take the mm to cm and solve for h:
[tex]h=\frac{600cm^3}{\pi*\frac{(7.70cm)^2}{4}} \\\\h=12.9cm[/tex]
Best regards!
The distance between each 100 mL mark is 2.15 cm.
The volume of a cylinder is obtained using the formula;
V = πr^2h
Now, we have the following information;
Volume of the cylinder = 600. mL or 600 cm^3
Diameter of the cylinder = 77 mm or 7.7 cm
Radius of the cylinder = 7.7/2 = 3.85 cm
Height of the cylinder = h
Hence;
600 = 3.142 × ( 3.85 )^2 × h
h = 600/3.142 × ( 3.85 )^2
h = 12.88 cm
There are six 100 mL marks on the beaker, the distance between each 100 mL mark = 12.88 cm/6 = 2.15 cm
Learn more about volume: https://brainly.com/question/12748872
Which has a bigger surface area, powder or marble chips
Answer:
powder
Explanation:
Between the powder and marble chips, the powder will have a larger surface area.
For the same masses of a solid substance in different forms such as lump, granules or powder, the smaller particle size of each form the larger the surface area.
Surface area increases from lumps to granules and them powder
A powder has the largest surface area and hence undergoes a more faster chemical reaction.Which of the following is the conjugate base of HSO3-?
A. H2SO3
B. SO2
C. S032
D. HSO3+
An acid and a base which differ from each other by a proton are said to form a conjugate pair. The conjugate base of HSO₃⁻ is SO₃²⁻. The correct option is C.
What is a conjugate base?The entity produced when an acid gives up a proton has a tendency to regain the proton and hence it behaves as a base. It is called the conjugate base of the parent acid.
The entity produced when a base accepts a proton has a tendency to donate the proton and hence behaves as an acid. It is called the conjugate acid of the parent base.
Sulfur dioxide dissolved in water gives sulfurous acid H₂SO₃. The conjugate base of this material contains one proton less i.e, HSO₃⁻ and the conjugate base of the substance bisulfite is SO₃²⁻which is sulfite ion.
Thus the correct option is C.
To know more about conjugate base, visit;
https://brainly.com/question/30225100
#SPJ6
A family requires 20,000 KJ of fuel energy every day. If calorific vlaue
of the fuel used by them is 15,000 kJ/kg, how much of this fuel will be
required by this family to meet their energy needs for the month of April?
Answer:
40 kilograms of fuel are required to meet their energy needs for the month of April.
Explanation:
The month of April has 30 days and the full energy needed by the family is determine by the following combustion formula, derived from dimension analysis:
[tex]n\cdot Q = m\cdot L_{c}[/tex] (1)
Where:
[tex]m[/tex] - Mass of the fuel, measured in kilograms.
[tex]L_{c}[/tex] - Calorific value of the fuel, measured in kilojoules per kilogram.
[tex]Q[/tex] - Daily fuel energy, measured in kilojoules.
[tex]n[/tex] - Number of days of the month, dimensionless.
If we know that [tex]Q = 20000\,kJ[/tex], [tex]n = 30[/tex] and [tex]L_{c} = 15000\,\frac{kJ}{kg}[/tex], then the amount of fuel required to meet their energy needs for the month of April is:
[tex]m = \frac{n\cdot Q}{L_{c}}[/tex]
[tex]m = \frac{(30)\cdot (20000\,kJ)}{15000\,\frac{kJ}{kg} }[/tex]
[tex]m = 40\,kg[/tex]
40 kilograms of fuel are required to meet their energy needs for the month of April.
Select the correct answer.
Which of these activities increases the amount of carbon in the atmosphere?
O A.
animals eating plants
OB. burning of fossil fuels
OC. fossilization
O D.
photosynthesis
48 g of Aluminum will produce how much heat (in kJ) for this reaction?
Use the following reaction:
2 Al + 3 CuSO4 → 3 Cu + Al2(SO4)3 ∆H = -680 kJ
Round your answer to a positive whole number and do not write the unit.
The heat produced from 48 g Aluminium = -578
Further explanationGiven
Reaction
2 Al + 3 CuSO4 → 3 Cu + Al2(SO4)3 ∆H = -680 kJ
48 g of Aluminum
Required
Heat released
Solution
mol of Aluminium = mass : Ar Al
mol = 48 g : 27 g/mol
mol = 1.78
From the reaction, heat released for 2 moles Al, so for 1.78 Al, the heat released :
[tex]\tt \dfrac{1.7}{2}\times -680~kJ=-578~kJ[/tex]
Which statement describes how the sun gets its light?
A. It bends light.
B. It reflects light.
C. It refracts light.
D. It makes its own light.
Answer:
D
Explanation:
it's a star it has gas and makes it own light
(1) Phosphorus silicon is a semi-conductor
When Silicone is altered with Phosphorus, 4 of its electrons form covalent bonding and the 5th electron becomes delocalized and thus it increases electrical conduction
Answer:
blue blah blue blah
Explanation:
1.7 x 10 cm= significant figures
Answer:
its 2
Explanation: