What element forms an ion with a +2 charge that has an electronic configuration of
12 222632364231046 (or [Kr])?

The final temperature of the water when thermal equilibrium is reached is approximately 24.36°C.

The principle of conservation of energy which states that the heat lost by the metal cubes must be equal to the heat gained by the water is used to determine the final temperature of the water.

The formula to calculate the heat lost by a metal cube is:

Q = m × c × ΔT

where;

For the silver cube:

m = density × volume

m = 10.49 g/cm³ × (2.31 cm)³

m = 58.48 g

c = 0.235 J/g°C (specific heat capacity of silver)

ΔT = (82.2°C - 19.6°C)

ΔT = 62.6°C

Q = 58.48 g × 0.235 J/g°C × 62.6°C

Q = 877.4 J

For the gold cube:

m = density × volume

m = 19.32 g/cm³ × (2.78 cm)³

m = 170.5 g

c = 0.129 J/g°C (specific heat capacity of gold)

ΔT = (82.2°C - 19.6°C)

ΔT  = 62.6°C

Q = 170.5 g × 0.129 J/g°C × 62.6°C = 1354.4 J

The total heat lost by both cubes is:

Qtotal = 877.4 J + 1354.4 J

Qtotal= 2231.8 J

To calculate the final temperature of the water, we can use the formula:

Q = mwater × cwater × ΔT

where;

Solving for ΔT:

ΔT = Qtotal / (mwater × cwater)

ΔT = 2231.8 J / (113.0 g × 4.184 J/g°C)

ΔT = 4.76°C

Final temperature = 19.6°C + 4.76°C

Final temperature= 24.36°C

Learn more about specific heat capacity at: https://brainly.com/question/21406849

#SPJ1

Answer:

2AgNO3 --> 2AgNO2 + O2

Explanation:

Matter is neither created nor destroyed in a chemical reaction. Balanced equations ensures that.

34.57 grams of Li3PO4 are required to react 44 g of H2SO4, in this case.

H2SO4 mass divided by its molar mass yields the number of moles of H2SO4: 44 g divided by 98.07 g/mol, or 0.4484 mol.

Li3PO4 moles equal (2/3) x H2SO4 moles equal (2/3) x 0.4484 mol = 0.2989 mol.

Using its molar mass, we can finally get the mass of Li3PO4 needed in grams:

Li3PO4 necessary mass equals number of moles times the molar mass of Li3PO4 (0.2989 mol times 115.78 g/mol equals 34.57 g).

As a result, 44 g of H2SO4 must be utilized in the reaction along with 34.57 g of Li3PO4.

To learn more about Sulphuric Acid (H2SO4) visit:

brainly.com/question/28513840

#SPJ1

Caustic soda or lye are two other names for sodium hydroxide. It is a typical ingredient in detergents and cleansers. Sodium hydroxide is a colorless, odorless solid at ambient temperature.

Lye and caustic soda are other names for sodium hydroxide, a chemical substance with the formula NaOH. It is a whitish, solid ionic substance made up of the cations sodium (Na+) and the anions hydroxide (OH).

At normal atmospheric temps, sodium hydroxide, an extremely corrosive base and alkali, breaks down proteins and can result in serious chemical burns. It easily draws moisture and carbon dioxide from the air due to its high water solubility. It produces a string of NaOH-nH2O hydrates. From water solutions, the monohydrate NaOHH2O crystallizes between 12.3 and 61.8 °C. This monohydrate is frequently the "sodium hydroxide" sold professionally, and it may be used in published statistics instead of the anhydrous substance.

Learn more about sodium hydroxide

https://brainly.com/question/29327783

#SPJ1

Answer: Avogadro's number is 6.022 x 10^23, which represents the number of particles (atoms or molecules) in one mole of a substance. Therefore, to calculate the number of moles of propane from the given number of molecules, we need to divide the number of molecules by Avogadro's number:

Explanation: number of moles = number of molecules / Avogadro's number

number of moles = 3.5 x 10^24 / 6.022 x 10^23

number of moles = 5.81

Therefore, the tank contains 5.81 moles of propane.

Gold is not involved in the cycling of energy and matter on Earth.

option B.

Biogeochemical cycles refer to the pathways by which essential elements such as carbon, nitrogen, and phosphorus move through the Earth's biosphere, atmosphere, geosphere, and hydrosphere. These cycles are crucial for maintaining the balance of elements required for life on Earth, and they involve both biotic and abiotic processes.

The carbon cycle involves the movement of carbon through the atmosphere, the biosphere, and the oceans, with processes such as photosynthesis, respiration, and decomposition contributing to carbon uptake and release. Carbon is also stored in rocks and sediments as fossil fuels.

The other three elements listed - phosphorus, nitrogen, and carbon - are all essential elements involved in biogeochemical cycles on Earth, including the phosphorus cycle, nitrogen cycle, and carbon cycle. Gold, on the other hand, is a relatively inert element and does not play a significant role in the cycling of energy and matter on Earth.

Learn more about cycling of energy here: https://brainly.com/question/29986752

#SPJ1

Answer:

Your answer is electrical to chemical.

Explanation:

Ammonia is a gas,

however at low temperature or high pressure the gas become liquid and at extreme conditions,a solid

#Brainac

Answer:

b option is correct

Explanation:

we cannot ever know the speed and location of the electron

Chemical processes referred to as endothermic reactions occur when the reactants take in heat energy from their environment to create products.

Endothermic reactions quickly and efficiently take up heat-based energy from their surroundings. In contrast, an exothermic process transfers energy into the system's surroundings. A common illustration of an endothermic chemical reaction is photosynthesis.

Chemists refer to the process of boiling water as being endothermic since heat must be added. It follows that since certain processes need heat, others must also produce heat as they operate. They are referred to as exothermic.

To know more about endothermic reactions visit:-

brainly.com/question/23184814

#SPJ1

Answer:

The shift often happens when heat is applied or removed at a specific temperature

Explanation:

PLEASE MARK ME BRANLY TY HAVE A GREAT DAY!

8.8 moles of CuCl are required for 4.4 moles of H2S to totally react.

The unit of measurement known as a mole (mol) is used to represent the quantity of a substance. The amount of a substance that has the same number of particles (atoms, molecules, or ions) as there are in 12 grams of carbon-12 is referred to as a mole. This number, which is roughly 6.022 x 1023, is referred to as Avogadro's number.

The reaction between copper I chloride and hydrogen sulfide has the following balanced chemical equation:

2CuCl + H2S → Cu2S + 2HCl

The balanced equation shows that the reaction between 2 moles of CuCl and 1 mole of H2S results in 2 moles of HCl and 1 mole of Cu2S.

So, we must use stoichiometry to calculate the amount of CuCl needed to thoroughly react with 4.4 moles of H2S:

4.4 moles of H2S × (2 moles of CuCl / 1 mole of H2S) = 8.8 moles of CuCl

As a result, 8.8 moles of CuCl are required for 4.4 moles of H2S to totally react.

To know more about mole, visit:

https://brainly.com/question/26416088

#SPJ1

The limiting reactant is CH4. This is because the number of moles of CH4 is 4.44mol, while the number of moles of water is 0.86mol. The number of moles of hydrogen produced from the reaction is 8.88mol.

Hydrogen is a chemical element with the symbol H and atomic number 1. It is the most abundant element in the universe, making up about 75% of the universe's elemental mass. Hydrogen is a colorless, odorless, and tasteless gas, which is the most basic and simplest of all elements. It is a highly flammable, light, and combustible gas and burns with a pale blue flame. Hydrogen is a component of water, which is composed of two atoms of hydrogen and one atom of oxygen. In addition, it is found in many organic compounds and is used in the production of ammonia, methanol, and hydrochloric acid

This means that there are not enough moles of water to completely react with the CH4. Therefore, the limiting reactant is CH4.

The number of liters of hydrogen produced from the reaction of 80.0 g of CH4 and 16.3 g of water is 16.3 L. This is because the number of moles of hydrogen produced is 8.88mol, and at STP the volume of 1mol of a gas is 22.4L. Therefore, the volume of 8.88mol of hydrogen is 8.88 x 22.4L = 197.3L. Since the total volume of gas produced is 197.3L and 16.3g of water was used in the reaction, the amount of hydrogen produced is 16.3L.

To learn more about  hydrogen

https://brainly.com/question/24433860

#SPJ9

Answer:

O a. medium of turpentine

To determine the number of molecules of PCI5, we need to use the following steps:

Convert the given mass of PCI5 to moles using the molar mass of PCI5.

Use Avogadro's number to convert the number of moles to molecules.

The molar mass of PCI5 can be calculated as follows:

P = 1 x 30.97 = 30.97

C = 1 x 12.01 = 12.01

I = 5 x 126.90 = 634.50

Molar mass of PCI5 = 30.97 + 12.01 + 634.50 = 677.48 g/mol

Mass to moles:

moles = mass / molar mass

moles = 77.4 g / 677.48 g/mol

moles = 0.114 moles

Moles to molecules:

One mole of any substance contains 6.022 x 10^23 particles (Avogadro's number).

Number of molecules = moles x Avogadro's number

Number of molecules = 0.114 mol x 6.022 x 10^23 mol^-1

Number of molecules = 6.87 x 10^22 molecules

Therefore, there are 6.87 x 10^22 molecules of PCI5 in 77.4g of PCI5.

The density of the sample of argon gas at 69 °C and 768 mmHg is 1.44 g/L (1st option)

From the question given above, the following data were obtained:

The density of the sample of argon gas can be obtained as illustrated below:

D = MP / RT

D = (40 × 1.01)  / (0.0821 × 342)

D = 1.44 g/L

Thus, from the above calculation, we can conclude that the density of the gas is 1.44 g/L (1st option)

Learn more about density:

https://brainly.com/question/952755

#SPJ1

No, it is not possible to fit one mole of people into a classroom.

One mole of anything is defined as the amount of that substance that contains the same number of particles as there are atoms in exactly 12 grams of carbon-12. This number is known as Avogadro's number and is equal to approximately 6.022 x 10²³.

Assuming that one person has an average mass of 70 kilograms, the mass of one mole of people would be approximately 70 kilograms x 6.022 x 10²³, which is equal to about 4.2 x 10²⁵ kilograms.

Clearly, this is an enormous mass, far too large to fit into any classroom or even any building on Earth. Therefore, it is not possible to fit one mole of people into a classroom.

Learn more about number of moles here: https://brainly.com/question/25274322

#SPJ1

Answer:

One mole of people is 6.02x1023 people. That’s more people than there are in the entire world which is estimated to be about 7x109 people. So clearly the answer is NO.

Explanation:

C.) Schrodinger's Quantum Mechanical Model is the electron model currently accepted by modern science. This model is based on the principles of quantum mechanics, which describe the behavior of particles at the atomic and subatomic level.

What is Electron?

An electron is a subatomic particle that carries a negative electric charge. It is one of the three fundamental particles that make up atoms, along with protons and neutrons. Electrons are much smaller than protons and neutrons, and they orbit around the nucleus of an atom. Electrons play a crucial role in chemical reactions, since they determine the chemical properties of atoms and molecules.

It represents electrons as probability clouds or orbitals, rather than as discrete particles following classical trajectories. This model has been successful in explaining the behavior of electrons in atoms and molecules, and has led to many important discoveries in modern physics and chemistry.

Learn more about Electron from the given link

https://brainly.com/question/860094

#SPJ1

1) Gas escapes to equalize pressure inside and outside of balloon.

2) Pressure pushes gases out of the balloon when released.

3) The gas pushes against the outside air, pushing it back.

For its creator, Frenchman Jacques Charles, a gas balloon may also be referred to as a Charlière. Large blimps and tiny latex celebration balloons are two common types of gas balloons today. Before hot-air balloons took over, human balloon flying used gas balloons for almost 200 years, well into the 20th century.

Fill your balloon with two teaspoons of baking soda, and fill the container with half a cup of acetic vinegar. Avoid using too much cola! The baking soda in the balloon will descend into the container and mix with the vinegar when the bottleneck is inserted into the balloon's neck and the balloon is straightened.

Learn  more about gas balloons

https://brainly.com/question/17714670

#SPJ1

The Gibbs free energy at 298 K for the given reaction is 130.822 KJ

The Gibbs free energy for a given reaction is given by the following formula:

ΔG = ΔH – TΔS

Where

With the above formula, we can determine the Gibbs free energy for the reaction in the above question as follow:

ΔG = ΔH - TΔS

ΔG = 178.8 - (298 × 0.161)

ΔG = 178.8 - 47.978

ΔG = 130.822 KJ

Thus, the Gibbs free energy is 130.822 KJ

Learn more about Gibbs free energy:

https://brainly.com/question/13318988

#SPJ1

Answer:

The balanced chemical equation for the dissociation of the weak base, B, in water is:

B + H2O ⇌ BH+ + OH-

The ICE table for the reaction can be set up as follows:

B + H2O ⇌ BH+ + OH-

I 0.185 M 0 M 0 M

C -x +x +x

E 0.185 - x x x

At equilibrium, the concentration of [BH+] and [OH-] is equal since the acid-base reaction involves the transfer of a proton from the weak base, B, to a water molecule. The [H+] ion concentration can be found by applying the equation:

Kw = [H+][OH-]

where Kw is the ion product constant of water (1.0 × 10^-14 at 25°C).

pH = -log[H+]

pOH = -log[OH-]

pKw = pH + pOH = 14.00

Using the given pH, we can find the [H+] concentration:

pH = 12.95

[H+] = 10^-pH = 7.07 × 10^-13 M

Since Kw = [H+][OH-], we can solve for [OH-]:

Kw = 1.0 × 10^-14 = [H+][OH-]

[OH-] = Kw/[H+] = 1.41 × 10^-2 M

At equilibrium, the [BH+] concentration is equal to the [OH-] concentration. Therefore, we can substitute the [OH-] value we found into the equilibrium expression for Kb to solve for Kb:

Kb = [BH+][OH-]/[B]

Kb = (x)(1.41 × 10^-2)/(0.185 - x)

The value of Kb for the weak base, B, can be found using the pKb expression:

pKb = 14.00 - pKw - pH

pKb = 14.00 - 1.00 - 12.95

pKb = 0.05

Kb = 10^-pKb = 1.00 × 10^-0.05

Substituting this value into the Kb expression gives:

1.00 × 10^-0.05 = (x)(1.41 × 10^-2)/(0.185 - x)

Solving for x gives:

x = 4.70 × 10^-4 M

Therefore, the concentrations of the species at equilibrium are:

[B] = 0.185 M - x = 0.1845 M

[BH+] = x = 4.70 × 10^-4 M

[OH-] = x = 4.70 × 10^-4 M

Based on the given data, we can see that the concentrations of all three greenhouse gases (CO₂, CH₄, and N₂O) have increased over time.

In the sample from the 500s, the concentrations were relatively low compared to the later samples, with CO₂ at 269 ppm, CH₄ at 271 ppm, and N₂O at 260 ppm. However, in the sample from the 1700s, the concentrations had already started to increase, with CO₂ at 284 ppm, CH₄ at 736 ppm, and N₂O at 657 ppm. By the sample from the 1800s, the concentrations had increased further, with CO₂ at 276 ppm, CH₄ at 680 ppm, and N₂O at 276 ppm.

Therefore, This trend of increasing greenhouse gas concentrations is significant because these gases trap heat in the Earth's atmosphere, leading to a warming effect known as the greenhouse effect. As the concentrations continue to increase, it can lead to more severe and frequent weather events, rising sea levels, and other negative impacts on the environment and human societies.

Learn more about Carbon dioxide on:

https://brainly.com/question/25385913

#SPJ1

The beach at Antibes, France, is made mostly of small, smooth rocks that have been worn down by being pushed against one another by the energy of the sea water.

The geological process of erosion occurs when earthen materials are pushed and worn away by natural forces such as wind or water. Although it does not necessitate movement, a similar process known as weathering dissolves or disintegrates rock.

Weathering occurs when rocks and minerals on the Earth's surface disintegrate or dissolve. Weathering is caused by a variety of factors such as water, ice, acids, salts, plants, animals, and temperature swings. After a rock has been broken down, a process known as erosion transports the shards of rock and mineral away. The Earth's rocks are all too soft to endure weathering and erosion.

To know more about erosion visit:

brainly.com/question/30587260

#SPJ9

These elements' shared possession of a single valence electron in their atoms explains why they are chemically related. As a result, F is the right response.

An atom's valence shell electrons control how it interacts with its neighbours and, consequently, its chemical characteristics. Lithium and sodium both contain one valence electron, hence they have comparable chemical characteristics. Elements from this family include lithium, sodium, potassium, rubidium, cesium, and francium (Li, Na, K, Rb, Cs, and Fr, respectively). The components of Group 1 have similar traits. Each of them is a delicate silver metal. These metals have low melting temperatures and are extremely reactive because of their low ionisation energy.

Learn more about electrons here :

https://brainly.com/question/29237397

#SPJ1

There are approximately 6.13 grams of O2 in the 14.0 L balloon at 0.25 atm and 73⁰C.

First we can use the Ideal Gas Law equation:

PV = nRT

Where

First, we need to convert the temperature from Celsius to Kelvin:

T = 73⁰C + 273.15 = 346.15 K

Next, we can solve for the number of moles:

n = (PV) / (RT)

n = (0.25 atm × 14.0 L) / (0.0821 L·atm/mol·K × 346.15 K)

n = 0.1915 mol

Finally, we can calculate the mass of O2 using the molar mass of O2, which is 32.00 g/mol:

mass = n × molar mass

mass = 0.1915 mol × 32.00 g/mol

mass = 6.13 g

Therefore, there are approximately 6.13 grams of O2 in the 14.0 L balloon at 0.25 atm and 73⁰C.

Learn more about Ideal Gas Law here : brainly.com/question/12873752

#SPJ1

The reaction has a 36.43% percent yield. This suggests that part of the reactants were not transformed into products and that the reaction did not proceed to its full potential.

The mole, which is denoted by the symbol "mol," is the volume of a system that has the same number of atoms as there are in 0.012 kilo grammes of carbon 12.

The chemical equation for converting [tex]O_{2}[/tex] to [tex]O_{3}[/tex] is as follows:[tex]O_{3}[/tex]

3[tex]O_{2}[/tex] ⇒ 2[tex]O_{3}[/tex]

From above we can conclude that the equation that 3 moles of [tex]O_{2}[/tex] react to create 2 moles of [tex]O_{3}[/tex].

By applying the  the mole ratio and molar mass of [tex]O_{3}[/tex],

the theoretical yield of O3 will be-

[tex]O_{3}[/tex] mol mass = 3 x O mol mass = 3 x 16.00 g/mol = 48.00 g/mol.

o find the number of moles of O2, we can use the formula:

moles = [tex]\frac{mass}{molar mass}[/tex]

moles of [tex]O_{2}[/tex] = [tex]\frac{305 g}{32.00}[/tex] g/mol = 9.53 mol

The theoretical yield of [tex]O_{3}[/tex] from the balanced equation using the following formula:

Moles of [tex]O_{3}[/tex] = [tex]\frac{2}{3}[/tex] x moles of [tex]O_{2}[/tex]

= [tex]\frac{2}{3}[/tex] x 9.53 mol = 6.35 mol

Mass of O3 = moles of [tex]O_{3}[/tex] x molar mass of [tex]O_{3}[/tex]

= 6.35 mol x 48.00 g/mol = 304.80 g

= 304.80 g.

Percent yield = ([tex]\frac{actual yield}{ theoretical yield}[/tex]) x 100%

Given that the actual yield = 111 g

Percent yield = ([tex]\frac{111 g }{304.80 g}[/tex]) x 100%

= 36.43%

2 mL οf 2.5% cοrtisοne acetate suspensiοn and 6 mL οf nοrmal saline sοlutiοn shοuld be used tο prepare the prescribed suspensiοn.

- Cοrtisοne acetate is required in 100mg

- 2.5% suspensiοn οf cοrtisοne acetate in nοrmal saline sοlutiοn is available

- Cοncentratiοn οf cοrtisοne acetate in 2.5% suspensiοn is 25mg/mL

- Thus, 4mL οf 2.5% suspensiοn is required tο get 100mg οf cοrtisοne acetate

- Thus, 4mL οf 2.5% suspensiοn and 4mL οf nοrmal saline sοlutiοn tοtal 8mL is required tο make the prescribed suspensiοn

- But, 2.5% suspensiοn already cοntains nοrmal saline sοlutiοn

- Sο, final requirement οf 2.5% suspensiοn and nοrmal saline sοlutiοn is 2mL and 6mL respectively

2 mL οf 2.5% cοrtisοne acetate suspensiοn and 6 mL οf nοrmal saline sοlutiοn shοuld be used tο prepare the prescribed suspensiοn.

Learn more about Suspension from the given link:

brainly.com/question/21110685

#SPJ1