What does a positive H look like on a potential energy diagram

The buffer would be destroyed by actions that significantly alter the concentrations of both the weak acid and its conjugate base.

The buffer solution contains equal amounts of a weak acid and its conjugate base or a weak base and its conjugate acid. The pH of the buffer solution is maintained by the reversible reactions between the weak acid and its conjugate base or the weak base and its conjugate acid. Any action that affects the concentration of these components can destroy the buffer. For example, if an acid or base is added to the buffer, it can react with the buffer components and alter their concentrations, resulting in the loss of buffering capacity.

Similarly, if the buffer components are removed from the solution by precipitation or other means, the buffer will be destroyed. In this case, the buffer contains half and naf, which are likely to be the conjugate acid-base pair. If the concentration of either component is altered significantly, the buffer capacity will be affected, and the buffer will be destroyed.

More on buffer: https://brainly.com/question/31367305

#SPJ11

To answer these questions, we need to consider the Faraday's laws of electrolysis and the molar mass of chromium (Cr).

Therefore, approximately 0.045 A (or 45 mA) of current is required to plate out 0.290 mol of chromium (Cr) from a Cr3+ solution in a period of 7.70 hours.Therefore, approximately 0.764 grams of chromium (Cr) will be plated out after 1.30 days.The charge number for chromium is 3 because each Cr3+ ion accepts 3 electrons to form chromium metal (Cr).To calculate the amperage required to plate out 0.290 mol of Cr from a Cr3+ solution in a period of 7.70 hours.

To know more about electrons visit :

https://brainly.com/question/12001116

#SPJ11

The molar solubility of substance X is approximately 1.439×10^(-9) mol/L.

To calculate the molar solubility of a substance, we need to convert the solubility from mass per volume (mg/L) to moles per volume (mol/L). Here's how you can do it:

Convert the solubility from milligrams per liter (mg/L) to grams per liter (g/L):

Solubility (g/L) = Solubility (mg/L) / 1000

Solubility (g/L) = 1.9×10^(-4) mg/L / 1000 = 1.9×10^(-7) g/L

Calculate the molar solubility using the molar mass of the substance:

Molar solubility (mol/L) = Solubility (g/L) / Molar mass (g/mol)

Molar solubility (mol/L) = 1.9×10^(-7) g/L / 132 g/mol

Molar solubility (mol/L) ≈ 1.439×10^(-9) mol/L

Therefore, the molar solubility of substance X is approximately 1.439×10^(-9) mol/L.

Learn more about molar solubility here:

https://brainly.com/question/31043999

#SPJ11

The temperature of the gas sample will be approximately 618.6 K when the volume changes to 333 ml and the pressure is increased to 2.58 atm

To solve this problem, we can use the combined gas law, which relates the initial and final conditions of a gas sample:

(P1 * V1) / (T1) = (P2 * V2) / (T2)

Where:

P1 and P2 are the initial and final pressures, respectively.

V1 and V2 are the initial and final volumes, respectively.

T1 and T2 are the initial and final temperatures, respectively.

Let's plug in the given values into the equation:

(1.40 atm * 245 ml) / (308 K) = (2.58 atm * 333 ml) / (T2)

Now we can solve for T2:

T2 = (2.58 atm * 333 ml * 308 K) / (1.40 atm * 245 ml)

T2 ≈ 618.6 K

Therefore, the temperature of the gas sample will be approximately 618.6 K when the volume changes to 333 ml and the pressure is increased to 2.58 atm.

Learn more about gas here:

https://brainly.com/question/14812509

#SPJ11

The substance with the largest molar entropy among the given options is HCl (g) because gaseous states generally have higher entropy compared to solid or liquid states.

Entropy is a measure of the disorder or randomness in a system. The molar entropy of a substance depends on its physical state and molecular complexity. In general, gaseous states have higher entropy compared to solid or liquid states due to the increased molecular freedom and higher number of possible microstates.

Among the given options, HCl (g) is expected to have the largest molar entropy. This is because HCl (g) is in the gaseous state, which allows the molecules to move more freely and occupy a larger volume compared to the condensed phases (HCl (s) and HCl (l)). Gaseous molecules have more available energy levels and configurations, leading to a greater number of microstates and higher entropy.

HBr (g) and HI (g) are also in the gaseous state, but since the molar entropy also depends on the molecular complexity, it is not possible to determine which one has a higher entropy without additional information about their molecular structures.

Learn more about entropy, below:

https://brainly.com/question/32167470

#SPJ11

The entropy change of the universe is determined by the sum of the entropy change of the system (ΔSsys) and the entropy change of the surroundings (ΔSsurr). When ΔSsys + ΔSsurr < 0, it represnts.

The symbol ΔSuniv represents the change in the total entropy of the system and the surroundings combined. If the sum of the changes in entropy for the system (ΔSsys) and the surroundings (ΔSsurr) is negative, it indicates a decrease in the total entropy of the universe. This means that the process is non-spontaneous or not favourable from an entropy perspective. Therefore, the correct answer is that ΔSuniv is negative.

Learn more about entropy change here ;

https://brainly.com/question/28244712

#SPJ11

By using the principles of resonance, we can assign each peak in the spectrum to the corresponding protons in the molecule with a high degree of confidence. In summary, using resonance can be a powerful tool in assigning a spectrum and understanding the chemical structure of a molecule.

Assigning a spectrum requires analyzing the different peaks and determining which protons are responsible for each peak. Resonance is a useful tool for understanding the assignment of protons in a molecule. In the case of proton e, its chemical shift suggests that it is adjacent to an electronegative atom such as oxygen or nitrogen. By looking at the resonance structure of the molecule, we can see that proton e is adjacent to a nitrogen atom. We can extrapolate this information for protons b, c, and d by examining their chemical shifts and considering the resonance structures of the molecule.

to know more about spectrum visit:

https://brainly.com/question/14282264

#SPJ11

The proposed mechanism involves the nucleophilic attack of the peroxyacetate anion on the double bond of (E)-1,2-diphenylethene, followed by rearrangement and ring closure to form the trans-1,2-diphenylene oxirane.

The conversion of (E)-1,2-diphenylethene to trans-1,2-diphenylene oxirane under the influence of peroxyacetic acid can proceed through a mechanism known as the Prilezhaev epoxidation.                                      

The proposed mechanism involves the following steps:

Peroxyacetic acid (CH3CO3H) dissociates in the presence of an acid catalyst to form a peroxyacetate anion (CH3CO3-).

The peroxyacetate anion attacks one of the double bonds in (E)-1,2-diphenylethene, leading to the formation of a cyclic intermediate known as a peroxyacetate ester.

This step involves nucleophilic attack by the oxygen of the peroxyacetate anion on one of the carbon atoms of the double bond.

The peroxyacetate ester undergoes rearrangement, resulting in the formation of a cyclic transition state.

In this transition state, the oxygen of the peroxyacetate ester is coordinated to one of the phenyl rings, facilitating the subsequent ring closure.

The ring closure occurs through intramolecular attack by the oxygen of the peroxyacetate ester onto the other carbon atom of the double bond, forming the oxirane or epoxide ring.

This step involves the migration of the oxygen atom from the peroxyacetate ester to the other carbon of the double bond, resulting in the formation of the oxirane ring and the release of an acetate ion.

To know more about nucleophilic attack refer here:

https://brainly.com/question/28325919#

#SPJ11

True. The ultimate source of radon in the environment is the radioactive decay of naturally occurring uranium and thorium in soil, rock, and water.

Radon is a naturally occurring, colorless, odorless, and tasteless radioactive gas that is formed by the decay of these radioactive elements. As radon decays, it produces additional radioactive particles called "radon daughters," which can attach to dust and other airborne particles and can be inhaled into the lungs. Exposure to high levels of radon is the leading cause of lung cancer among non-smokers, and it is estimated that radon causes thousands of lung cancer deaths each year. Therefore, it is important to test for radon in homes and other buildings to ensure that levels are below the recommended safety level.

To know more about radioactive visit:

https://brainly.com/question/1770619

#SPJ11

I apologize for any confusion caused by my previous responses. Isocitrate dehydrogenase catalyzes following reactions:

Oxidation: Isocitrate dehydrogenase catalyzes the oxidative decarboxylation of isocitrate to form α-ketoglutarate, generating NADH in the process.

This reaction involves the removal of electrons from isocitrate, resulting in its oxidation.

Decarboxylation: During the oxidation reaction, isocitrate dehydrogenase facilitates the decarboxylation of isocitrate, leading to the release of carbon dioxide (CO2).

Therefore, the correct answers are oxidation and decarboxylation.

To know more about catalyzes  refer here

brainly.com/question/30639561#

#SPJ11

In a chemical reaction with an unfavorable standard free energy, the reactant and product concentrations can be manipulated to make the reaction more thermodynamically favorable by applying Le Chatelier's principle. Here are a few strategies:

Increase the concentration of products: According to Le Chatelier's principle, increasing the concentration of products will shift the equilibrium of the reaction towards the reactants, making the reaction more favorable in the forward direction. By removing the products or continuously removing the reaction products, it can help to drive the reaction forward.

Decrease the concentration of reactants: Similarly, decreasing the concentration of reactants will shift the equilibrium towards the products, favoring the forward reaction. By using a limited amount of reactants or continuously removing the reactants, it can help to drive the reaction forward.

Know more about standard free energy here:

https://brainly.com/question/28237924

#SPJ11

It is not possible to calculate the molarity of oxygen in water based on the given information.

To calculate the molarity of a solute in a solution, we need to know the number of moles of the solute and the volume of the solution.The problem statement provides the volume of oxygen gas (1.75 L) but does not provide information on the number of moles of oxygen gas or the volume of water.

Additionally, we would need to know if any oxygen gas has actually dissolved in the water to form a solution.Therefore, we cannot calculate the molarity of oxygen in water based on the given information.

To know more about molarity refer here

brainly.com/question/31545539#

#SPJ11

The species with a Lewis structure and molecular geometry similar to SO3 is CO32-.

The species with a Lewis structure and molecular geometry similar to SO3 is SO32-.

The Lewis structure of SO3 (sulfur trioxide) consists of a central sulfur atom bonded to three oxygen atoms.

The arrangement of the three oxygen atoms around the central sulfur atom is trigonal planar, forming a molecule with a trigonal planar molecular geometry.

Among the given options:

- NH3 (ammonia) has a trigonal pyramidal molecular geometry.

- ICl3 (iodine trichloride) has a T-shaped molecular geometry.

- CO32- (carbonate ion) has a trigonal planar molecular geometry, similar to SO3.

- PCl3 (phosphorus trichloride) has a trigonal pyramidal molecular geometry.

Therefore, the species with a Lewis structure and molecular geometry similar to SO3 is CO32-

To know more about Lewis structure refer here

brainly.com/question/29603042#

#SPJ11

The percent composition of calcium acetate is 29.89% calcium, 17.92% carbon, 4.52% hydrogen, and 47.67% oxygen.

To calculate the percent composition of calcium acetate (Ca(C2H3O2)2), you need to determine the total atomic mass of each element in the compound and divide it by the molar mass of the entire compound.
The atomic mass of calcium (Ca) is 40.08 g/mol, the atomic mass of carbon (C) is 12.01 g/mol, the atomic mass of hydrogen (H) is 1.01 g/mol, and the atomic mass of oxygen (O) is 16.00 g/mol. The molar mass of calcium acetate is:
1 Ca atom x 40.08 g/mol = 40.08 g/mol Ca
2 C atoms x 12.01 g/mol = 24.02 g/mol C
6 H atoms x 1.01 g/mol = 6.06 g/mol H
4 O atoms x 16.00 g/mol = 64.00 g/mol O
Total molar mass = 134.16 g/mol
To calculate the percent composition of each element:
% Ca = (40.08 g/mol Ca / 134.16 g/mol) x 100% = 29.89%
% C = (24.02 g/mol C / 134.16 g/mol) x 100% = 17.92%
% H = (6.06 g/mol H / 134.16 g/mol) x 100% = 4.52%
% O = (64.00 g/mol O / 134.16 g/mol) x 100% = 47.67%
Therefore, the percent composition of calcium acetate is 29.89% calcium, 17.92% carbon, 4.52% hydrogen, and 47.67% oxygen.

To learn more about percent composition https://brainly.com/question/20393858

#SPJ11

To calculate the density of an argon atom, we need to use the formula for the density of a sphere, which is ρ = m/V, where m is the mass and V is the volume. The volume of a sphere can be found using the formula V = (4/3) π R^3, where R is the radius. Substituting the given values of m and R, we get:

Therefore, the density of an argon atom is approximately 1.66*10^3 g/m^3.

The atom is a basic unit of matter, consisting of an atomic nucleus and a cloud of negatively charged electrons that surrounds it. The atomic nucleus consists of positively charged protons and neutral charged neutrons. The electrons in an atom are bound to the nucleus by electromagnetic forces

Learn More About Atom At https://brainly.com/question/17545314

#SPJ11

Therefore, the correct option is (b) HCl.

Stomach acid, also known as gastric acid, consists mainly of Hydrochloric acid (HCl) dissolved in water.

Hydrochloric acid (HCl) is a strong acid that is naturally produced by the cells lining the stomach. It plays an important role in the digestive process by breaking down food and killing harmful bacteria that may have been ingested. HCl also helps to activate the enzymes that break down proteins, carbohydrates, and fats in the stomach.

The concentration of HCl in stomach acid can vary depending on factors such as the type of food consumed and the individual's health. In healthy individuals, the concentration of HCl in stomach acid can range from about 0.5% to 1.5%.

When the stomach produces too much HCl or the lining of the stomach becomes damaged, it can lead to conditions such as acid reflux, ulcers, and gastritis. These conditions can cause discomfort and pain, and may require medical treatment to manage.

In summary, stomach acid consists mainly of hydrochloric acid (HCl) dissolved in water, and plays an important role in the digestive process.

To know more about acid refer here

https://brainly.com/question/17711169#

#SPJ11

Among the given compounds, the most ionic compound is option a. NaF (sodium fluoride).

Ionic compounds are formed by the transfer of electrons from a metal to a non-metal.

In NaF, sodium (Na) is a metal, and fluorine (F) is a non-metal. Sodium readily donates its valence electron to fluorine, resulting in the formation of Na⁺ cations and F⁻ anions.

The resulting compound, NaF, is held together by strong electrostatic attractions between the oppositely charged ions.

In contrast, the other options are not predominantly ionic compounds:

b. H₂O (water) is a covalent compound formed by the sharing of electrons between hydrogen and oxygen.

c. FeO (iron(II) oxide) is a compound that exhibits both ionic and covalent characteristics, but it is more covalent than ionic.

d. NaN₃ (sodium azide) is also a compound with both ionic and covalent characteristics, but it is more covalent than ionic.

e. IF (iodine monofluoride) is a covalent compound formed by the sharing of electrons between iodine and fluorine.

Therefore, the most ionic compound among the given options is NaF (sodium fluoride).

To know more about ionic refer here

brainly.com/question/29523788#

#SPJ11

True, aluminum metal can be prepared by electrolysis of its aqueous salts, specifically aluminum oxide (Al2O3) dissolved in a molten electrolyte such as cryolite (Na3AlF6). This process is called the Hall-Héroult process, and it is the primary method used for aluminum production.

The Hall-Héroult process is the most common method for the industrial production of aluminum. It involves the following steps:

(1) Preparation of the electrolyte: Cryolite (Na₃AlF₆) is mixed with aluminum oxide (Al₂O₃) and other additives. This mixture reduces the melting point of the electrolyte, allowing it to be in a molten state at a lower temperature.

(2) Construction of the electrolytic cell: The electrolytic cell consists of a carbon-lined steel container that acts as the cathode (negative electrode). Graphite rods are immersed in the molten electrolyte and act as the anodes (positive electrodes).

(3) Electrolysis: The molten electrolyte is charged with electric current. The aluminum oxide (Al₂O₃) in the electrolyte dissociates into aluminum ions (Al³⁺) and oxygen ions (O²⁻). The oxygen ions react with the carbon anodes, forming carbon dioxide (CO₂) gas. At the cathode (negative electrode), the aluminum ions (Al³⁺) are reduced and deposited as liquid aluminum metal (Al). The deposited aluminum collects at the bottom of the cell.

(4) Collection of aluminum metal: Periodically, the liquid aluminum is tapped from the bottom of the cell and collected for further processing and refining.

To know more about  aluminum metal visit:

https://brainly.com/question/30544662

#SPJ11

"All zero greenhouse gas emission fuel sources are also renewable". The statement is false.

While many renewable energy sources such as solar, wind, and hydropower produce zero greenhouse gas emissions, not all zero-emission fuels are renewable.

For example, nuclear power is a zero-emission source of electricity, but it is not considered a renewable energy source because it relies on the mining and processing of non-renewable uranium.

Renewable energy sources are defined as those that can be replenished naturally and sustainably within a human timescale. These include solar, wind, hydropower, geothermal, and biomass. Zero-emission fuels refer to any fuel source that emits no greenhouse gases during use, such as hydrogen fuel cells.

While renewable energy sources often overlap with zero-emission fuels, not all zero-emission fuels are renewable. Therefore, it is important to differentiate between the two terms when discussing the sustainability and environmental impact of different energy sources.

Visit here to learn more about greenhouse gas:

brainly.com/question/12684997

#SPJ11

The order of elution in chromatography is influenced by molecular weight, boiling point, and polarity of the functional group. (options A, B and C)

The order of elution refers to the sequence in which different compounds come out of a chromatography column. This sequence is influenced by various factors, including molecular weight, boiling point, and polarity of the functional group. In general, smaller molecules with lower molecular weight and boiling points tend to elute earlier, while larger molecules with higher molecular weight and boiling points elute later.

Similarly, compounds with more polar functional groups tend to have stronger interactions with the stationary phase and elute later than compounds with nonpolar functional groups. However, the specific order of elution depends on the specific conditions of the chromatography experiment, including the choice of stationary and mobile phases, column dimensions, and flow rate. Options A, B and C.

More elution in chromatography: https://brainly.com/question/31857554

#SPJ11

The correct answer is: b. LiAlD4, then D3O+ reactions can convert cyclopentanol to deuterocyclopentane

The reaction involving LiAlD4 (lithium aluminum deuteride) is a common method for the reduction of alcohols to their corresponding deuterated compounds. In this case, LiAlD4 reduces cyclopentanol to deuterocyclopentane by replacing the hydroxyl group with a deuterium atom (D). The subsequent treatment with D3O+ (deuterated water) allows for the final deuterium exchange and protonation.

The other options mentioned in choices a, c, and d involve different reagents or conditions that may not be suitable for the direct conversion of cyclopentanol to deuterocyclopentane.

Know more about deuterocyclopentane here:

https://brainly.com/question/622801

#SPJ11

Answer:

V2=58.9

Explanation:

V1=48.6

T2=81°C=354K

T1=19°C=292K

V2=X

V2=V1×T2÷T1

X=48.6×354÷292

X=17204.4÷292

X=58.9

V2=58.9

If the plastic wrap used in a water filtration experiment is dirty, it could potentially affect the results of the experiment. Dirty plastic wrap could contain microorganisms or other contaminants that could be introduced into the filtered water.

This could lead to false positives or negatives in the experiment, depending on the type of contaminants present. In addition, dirty plastic wrap could affect the filtering process itself by clogging the pores in the plastic or by causing the water to become contaminated with the dirt or debris on the plastic. This could lead to inconsistent or inaccurate results, as the filtered water may not be representative of the original water source.

To avoid these issues, it is important to use clean and sterilized plastic wrap in water filtration experiments. This could involve using disposable plastic wrap that is specifically designed for laboratory use, or sterilizing the plastic wrap using a heat sterilization method such as autoclaving. Additionally, it is important to carefully control the environmental conditions during the experiment, such as maintaining a consistent temperature and humidity, to prevent contamination of the plastic wrap or the filtered water.  

Learn more about plastic visit: brainly.com/question/29207835

#SPJ4

To calculate the molarity of a solution, you need to know the number of moles of the solute (OsF3) and the volume of the solution in liters.

First, let's calculate the number of moles of OsF3:

Molar mass of OsF3 = 247.224 g/mol

Mass of OsF3 in the beaker = 217 grams

Number of moles of OsF3 = Mass of OsF3 / Molar mass of OsF3

= 217 g / 247.224 g/mol

Next, we need to calculate the volume of the solution in liters:

Volume of the solution = 0.0673 liters

Now we can calculate the molarity:

Molarity = Number of moles of solute / Volume of solution

Substituting the values, we get:

Molarity = (217 g / 247.224 g/mol) / 0.0673 L

Calculating this expression, we find the molarity of the OsF3 solution.

Learn more about molarity on:

https://brainly.com/question/2817451

#SPJ1

a. 3-cyclohexadiene is not considered aromatic. Aromatic compounds must meet specific criteria, including having a cyclic structure, planar geometry, and a conjugated system with a certain number of π electrons. 3-cyclohexadiene does not fulfill these criteria and is not aromatic.

b. 3-cyclohexadiene has a higher heat of hydrogenation than cyclohexene. This is because 3-cyclohexadiene contains two double bonds, making it more reactive and unstable than cyclohexene, which has only one double bond. The additional double bond in 3-cyclohexadiene requires more energy to break and hydrogenate, resulting in a higher heat of hydrogenation.

c. 3-cyclohexadiene can act as a dienophile in a Diels-Alder reaction. A dienophile is a compound that reacts with a diene (a molecule containing two double bonds) in a Diels-Alder reaction to form a cycloadduct. In the case of 3-cyclohexadiene, its reactivity and ability to undergo Diels-Alder reactions make it a good dienophile.

Know more about 3-cyclohexadiene here:

https://brainly.com/question/30883334

#SPJ11

True.

Most metals, when exposed to air or water, will develop a thin oxide coating on their surface. This oxide coating is formed due to a reaction between the metal and the surrounding environment, and it serves as a protective layer that prevents further oxidation of the metal.

The oxide coating is generally very thin and often transparent, which allows the metal to retain its luster and shine. However, the thickness and composition of the oxide layer can vary depending on the metal and the conditions of the environment in which it is exposed.

For example, aluminum forms a very thin, transparent oxide layer that protects it from further oxidation, while iron forms a thicker, reddish-brown oxide layer (commonly known as rust) that can flake off and expose the underlying metal to further corrosion.

Overall, the development of an oxide coating on the surface of most metals is a natural process that helps to protect the metal from oxidation and corrosion over time.

To know more about oxide coating refer here

brainly.com/question/13092782#

#SPJ11

According to the discussion in the video, the primary concern regarding organizational feasibility is E. Determining if key stakeholders are in favor of updating the system.

Organizational feasibility refers to assessing whether a new system or technology aligns with the organization's goals, objectives, and stakeholders' needs. In this case, the primary concern is determining if key stakeholders, such as management, employees, and customers, support the decision to update the system.

The support and buy-in from these stakeholders are crucial for the successful implementation and adoption of the new system.

While the other options listed in the question are relevant considerations in system development and implementation, they are not directly related to organizational feasibility.

Deciding whether to build or buy a new system (option A), identifying a software package that fulfills requirements (option B), evaluating the IT group's technical expertise (option C), and determining system integration with current systems (option D) are more focused on technical and operational feasibility aspects rather than organizational feasibility.

To know more about organizational feasibility, refer here:

https://brainly.com/question/31917000#

#SPJ4

According to the discussion in the​ video, which of the following is the primary concern regarding organizational​feasibility?

A. Deciding whether to build or buy a new system

B. Identifying a software package that fulfills most of their requirements C. Deciding if the IT group has the technical expertise to build the new system

D. Determining if the new system can be integrated with current systems E. Determining if key stakeholders are in favor of updating the system

The correct description of the trend expected for effective nuclear charge (Zeff) is:

Zeff increases as you move to the right along a period.

Effective nuclear charge refers to the positive charge experienced by an electron in an atom's outermost energy level or valence shell. As you move to the right along a period in the periodic table, the atomic number increases, meaning there are more protons in the nucleus. The increased number of protons in the nucleus leads to a stronger attractive force between the nucleus and the valence electrons, resulting in a higher effective nuclear charge (Zeff) experienced by those electrons.

Learn more about nuclear  here:

https://brainly.com/question/12841418

#SPJ11

The correct statement regarding specific gravity of a material is b. it is defined as the density of a material divided by the density of water.

Specific gravity is a dimensionless quantity which compares the material's density to that of water, allowing us to determine if the material will float or sink in water.

It does not have units of g/mL, as it is a ratio of densities, which means the units will cancel out, leaving no units for specific gravity. So, option a is incorrect, and option c is also not valid as it includes option a. Thus, the correct choice is option b, as specific gravity is indeed the ratio of the material's density to water's density.

Learn more about Specific gravity here: https://brainly.com/question/20422535

#SPJ11

The partial pressure of O₂ in the gas mixture of 35% He and 65% O₂, is 520 mmHg.

To find the partial pressure of O₂ in a gas mixture, we'll use the concept of Dalton's Law of Partial Pressures. Here's a step-by-step explanation:

1. Understand the problem: We have a gas mixture containing 35% He and 65% O₂ with a total pressure of 800 mmHg. We need to find the partial pressure of O₂.

2. Use Dalton's Law of Partial Pressures: According to Dalton's Law, the total pressure of a gas mixture is the sum of the partial pressures of its individual gases. Mathematically, it's written as:
P(total) = P(He) + P(O₂)

3. Calculate the partial pressure of O₂: Since we know that O₂ makes up 65% of the gas mixture, we can find the partial pressure of O₂ by multiplying the total pressure by the percentage of O₂:
P(O₂) = P(total) × (percentage of O₂)
P(O₂) = 800 mmHg × 0.65

4. Solve for P(O₂):
P(O₂) = 520 mmHg

So, the partial pressure of O₂ in the gas mixture is 520 mmHg.

learn more about Dlaton's Law of pressures

https://brainly.com/question/19975849

#SPJ11