What are the symmetry operations of molecule AB4, where the molecule b lies at the center of the square and A lies at the center of the square and is not coplaner with B atoms. How to find the multiplication table

Answer:

False, I am pretty sure.

Explanation:

Transverse waves are always characterized by particle motion being perpendicular to wave motion. ... As a sound wave moves from the lips of a speaker to the ear of a listener, particles of air vibrate back and forth in the same direction and the opposite direction of energy transport.

Answer:

9sqrt4

Explanation:

Assuming you mean 6.0i m/s and (-2.0i + 4.0j) m/s^2:

The maximum positive x coordinate is when the time is 3 seconds, because the horizontal velocity will be zero, and therefore will be a turning point, where after that point the x coordinate will only be more negative.

After 3 seconds the x coordinate is 6*3+1/2*-2*3^2=9, and the y coordinate will be 1/2*4*3^2=18.

The distance from the origin is sqrt(9^2+18^2) = 9*sqrt(1+4)

At the instant the particle achieves its maximum positive x coordinate, the displacement is 4.03 m.

The displacement of the particle is calculated as follows;

v² = u² + 2as

where;

a = √(2² + 4²) = 4.47 m/s²

0 = u² + 2as

s = -u²/2a

s = -(6²)/(2 x 4.47)

s = -4.03 m

Thus, at the instant the particle achieves its maximum positive x coordinate, the displacement is 4.03 m.

Learn more about displacement here: https://brainly.com/question/321442

#SPJ6

Answer:

Explanation:distance-time =speed

a,V =s/t

V=2m/2s

V=1m/s

b,v=s/t

V=80m/40s

V= 2m/s

The average speed is 2m/s

Answer:

bro what.

Explanation:

... is this an actual physics question?

Answer:

Energy is converted from other forms, not created

Explanation:

The ball has a decrease in potential energy which allows the kinetic energy, and therefore speed, to  increase

Answer:

Answers A and D are the correct solution.

Explanation:

Both pots have the same mass and the same velocity vector.

the only difference between A and D is the selection of the reference frame positive direction.

The equation (A) and equation (D) correctly model the momentum of the two-cactus system.

The product of a particle's mass and velocity is called momentum. Being a vector quantity, momentum possesses both magnitude and direction.

According to Isaac Newton's second equation of motion, the force applied on a particle is equal to the time rate of change of momentum.

Given that: mass of each cactus: m = 5 kg.

And they slide down a sagging shelf in the same direction with the same speed.

In equation (A), both velocities of two cacti are in positive direction whereas, in equation (B), both velocities of two cacti is in negative direction.  Hence, equation (A) and equation (D) correctly model the momentum of the two-cactus system.

Learn more about momentum here:

https://brainly.com/question/24030570

#SPJ2

Answer:

FA = 2FB

Force on spring A is twice the Force on spring B

Explanation:

F = kx

FB = (kB)x

FA = (kA)x

FA= (2kB)x

FA = 2(kB)x

FA = 2FB

The force [tex]F_A[/tex] needed to stretch spring A is going to be twice as much as the force [tex]F_B[/tex] needed to stretch spring B.

Explanation:

We know that the spring constants are related as

[tex]k_A = 2k_B[/tex]

The force [tex]F_A[/tex] needed to stretch spring A is given by

[tex]F_A = -k_Ax[/tex]

Also, the force [tex]F_B[/tex] needed to stretch spring is

[tex]F_B = -k_Bx[/tex]

Taking the ratio of the forces, we get

[tex]\dfrac{F_A}{F_B} = \dfrac{-k_Ax}{-k_Bx} = \dfrac{k_A}{k_B}[/tex]

Since [tex]k_A = 2k_B,[/tex] the equation above becomes

[tex]\dfrac{F_A}{F_B} = \dfrac{2k_B}{k_B} = 2[/tex]

or

[tex]F_A = 2F_B[/tex]

This shows that since the spring constant of spring A is twice as large as that of spring B, the force needed is going to be twice as large.

Answer:

0.47 J

Explanation:

The relative kinetic energy of molecules in the soda is least energy and above the soda in the glass is greatest energy.

The relative kinetic energy of gas molecules increases with increase in the mean distance between the gas molecules.

Also, relative kinetic energy of gas molecules increases with in the temperature of the gas molecules and decreases with a decrease in the temperature of the of the gas molecules;

ΔK.E ∝ T

The ice in the soda lowers the temperature of the gas molecules, thereby reducing their average speed which in turn reduces the average kinetic energy of the gas molecules in the soda.

Above the soda in the glass, the concentration of the gas molecules is less and their mean distance is greatest when compared to inside the soda. This results to an increase in the speed of the gas molecules which increases their average kinetic energy.

Thus,  the relative kinetic energy of molecules in the soda is least energy and above the soda in the glass is greatest energy.

Learn more about temperature and kinetic energy here: https://brainly.com/question/305606

Answer:

1. friction, gravity,

Explanation:

Answer:

V= A ω      maximum KE of object in SHM

V2 / V1 = .958     ratio of amplitudes since ω is constant

KE2 / KE1 = 1/2 m V2^2 / (1/2 m V1^2) = (V2 / V1)^2

KE2 / KE1 = .958^2 = .918

So KE2 = .918 KE1 and .082 = 8.2% of the energy is lost in one cycle

The conventions for the current allow to find the result for which is the direction of the current the is circuit is:

Current is the movement of electrons in a circuit per unit time.

In an electrical circuit the electrons that have a negative charge leave the negative electrode towards the positive electrode, by convention the current goes in the opposite direction from the positive electrode towards the negative electrode.

When analyzing the given circuit, the current leaves the positive pole at the top of the battery and moves through the blue wire, reaches the light bulb and moves the red wire and reaches the negative pole of the battery.

In conclusion using the conventions for the current we can find the result for which is the direction of the current the is circuit is:

Learn more about electric current here: brainly.com/question/996480

The characteristics of the RLC circuit allow to find the result for the capacitance at a resonance of 93.5 Hz is:

A series RLC circuit reaches the maximum signal for a specific frequency, called the resonance frequency, this value depends on the impedance of the circuit.

            [tex]Z^2 = R^2 + ( wL - \frac{1}{wC} )^2[/tex]  

Where Z is the impedance of the circuit, R the resistance, L the inductance, C the capacitance and w the angular velocity. The negative sign is due to the fact that the current in the capacitor and the inductor are out of phase.

In the case of resonance, the impedance term completes the circuit as a resistive system.

           [tex]wL - \frac{1}{wC} = 0 \\w^2 = \frac{1}{LC}[/tex]  

Indicate that the inductance L = 1.6 H and the frequency f = 93.5 Hz.

Angular velocity and frequency are related.

         w = 2π f

Let's  substitute.

          [tex]C = \frac{1}{L ( 2 \pi f)^2 }[/tex]  

Let's calculate.

         [tex]C = \frac{1}{1.6 \ ( 2\pi \ 93.5)^2}[/tex]  

         C = 1.8 10⁻⁶ F

In conclusion with the characteristics of the RLC circuits we can find the result for the capacitance at a 93.5 Hz resonance is:

Learn more about serial RLC circuits here: brainly.com/question/15595203

Answer:

Cellular respiration that uses oxygen is called ​Cellular respiration

Explanation:

Without oxygen, it's call fermentation.

Answer:

we already are.

Explanation:

God created us, and we are the descendants of Abraham. if you want to choose to live against it, you'll be doing something similar to fighting a current. gods love is unfathomable. he is the only true God, and is our father in heaven.

Answer:

Decant it.

Explanation:

Pour the water/sugar solution off the sand. When the sand wants to start coming out as well, Stop and add fresh water to the beaker, stir to rinse the remaining solution into a less concentrated solution and decant again.

Repeat the dilution process until the mix is essentially sand and water, then drive the remaining water from the sand by drying.

If it takes 4.4 Newton to lift 1 pound, then to lift 2 pounds the force required will be equal to 8.8 Newton.

A force in physics is an input that has the power to change an object's motion. A mass-containing object's velocity can vary, or accelerate, as a result of a force. Intuitively, a push or a pull can also be used to describe forces.

Being such a vector quantity, a force does have magnitude and direction. The SI unit metric newton is used to measure it (N). The letter F stands for force.

According to Newton's second law's original formulation, an object's net force is equal to the speed that its momentum is changing over time.

As per the given data in the question,

It takes 4.4 N to lift 1 pound,

Let the total force required to lift 2 pounds is x.

x = (4.4 × 2)/1

x = 8.8 N

To  know more about Force:

https://brainly.com/question/13191643

#SPJ2

Answer:

1110111010010110

Explanation:

I am not able to upload the working out using the sum of weights method sorry

The magnitude of the gravitational force the planet exerts on Satellite 2 is  1/2F.

We recall that from Newton's law of universal gravitation, the gravitational force is given by;

F =G m1m2/r^2

m1 and m2 are the respective masses

r is the distance of separation.

Let the mass of the planet be M and the mass of the satellite be m. The distance of separation is r.

For satellite 1;

F = GmM/(2r)^2

F = GmM/4r^2

For satellite 2;

F2= G2mM/r^2

Hence, the magnitude of the gravitational force the planet exerts on Satellite 2 is  1/2F.

Learn more about gravitational force: https://brainly.com/question/24783651

The charge moved by this electric force is [tex]5.4 \times 10^{-5} \; Coulombs[/tex].

Given the following data:

To determine the charge:

Mathematically, the work done by an electric force in moving a charge from one point to another is given by the formula:

[tex]W = PQ[/tex]

Where:

Making Q the subject of formula, we have:

[tex]Q =\frac{W}{P}[/tex]

Substituting the given parameters into the formula, we have;

[tex]Q =\frac{2.70 \times 10^{-3}}{50}\\\\Q =5.4 \times 10^{-5} \; Coulombs[/tex]

Read more on charge here: https://brainly.com/question/14327016

Answer:

Explanation:

Only force in the direction of motion does work

The force acts in the x direction

The x change of position was 6 m

W = Fd = 12(6) = 72 J

The work done by the given force during this displacement is determined as 120 J.

The work done on the object is calculated as follows;

W = Fd

where;

d = √(6² + 8²)

d = 10 m

W = 12 x 10

W = 120 J

Learn  more about work done here: https://brainly.com/question/25573309

#SPJ6

This question involves the concepts of Gravitational Force and Weight force.

The value of acceleration is "b. 7.32 m/s²".

At the given height the weight of the rocket must be equal to the gravitational force between rocket and the Earth:

[tex]W=F_G\\mg=\frac{GmM}{R^2}\\\\g=\frac{GM}{R^2}[/tex]

where,

g = acceleration = ?

G = universal gravitational constant = 6.67 x 10⁻¹¹ N.m²/kg²

M = mass of earth = 5.97 x 10²⁴ kg

R = Radius of Earth + Height = 6.378 x 10⁶ m + 1 x 10⁶ m = 7.378 x 10⁶ m

Therefore,

[tex]g=\frac{(6.67\ x\ 10^{-11}\ N.m^2/kg^2)(5.97\ x\ 10^{24}\ kg)}{(7.378\ x\ 10^6\ m)^2}[/tex]

g = 7.32 m/s²

Learn more about the gravitational force here:

https://brainly.com/question/24783651?referrer=searchResults

Answer:

There always is an acceleration in a curvilinear motion, as the velocity vector changes, so always.

Answer:

Newton's second law

Explanation:

Answer:

b

Explanation:

1st grade common sense

Answer:

An ammeter has a zero offset error. This fault will affect. neither the precision nor the accuracy of the readings. only the precision of the readings.

The accuracy of the present measurement will be impacted by an ammeter's zero offset inaccuracy, but the precision of the measurement will not change.

Resistance is the obstruction of electrons in an electrically conducting material.

voltage = current ×resistance

How accurate measurement or reading is may be determined by its accuracy. The measurements will be off because of zero inaccuracy.

Thus, The precision of the measurement would not alter if an ammeter made a mistake with its zero offsets, but the accuracy of the current measurement would be decreased.

To learn more about resistance, refer to the link;

brainly.com/question/14547003

#SPJ2

Answer:

Explanation:

If we ASSUME that a CCW torque is positive

τ = 10sin135[8.0] - 16sin90[4.0] + 19sin160[3.0] = 12 N•m

as the result is positive, the net torque is CCW.

Yes, it is possible to determine the final speed of the rollercoaster if the initial speed and the height to be reached are known.

According the principle of conservation of energy, the total kinetic energy is equal to the total potential energy.

[tex]P.E _i + K.E_i = P.E_f + K.E_f \\\\mgh_i + \frac{1}{2} mv_i^2 = mgh_f + \frac{1}{2} mv_f^2\\\\gh_i + \frac{1}{2} v_i^2 = gh_f + \frac{1}{2} v_f^2\\\\g(0) + \frac{1}{2} v_i^2 = gh_f + \frac{1}{2} v_f^2\\\\\frac{1}{2} v_i^2 = gh_f + \frac{1}{2} v_f^2\\\\v_i^2 = 2gh_f + v_f^2\\\\v_i^2 - 2gh_f = v_f^2\\\\v_f = \sqrt{v_i^2 - 2gh_f}[/tex]

where;

Thus, it is possible to determine the final speed of the rollercoaster if the initial speed and the height to be reached are known.

Learn more about conservation of energy here: https://brainly.com/question/166559

Answer:

is there any questions

Answer:

What is your question???

Explanation: