Use a trigonometric equation to
determine the leg of this triangle.
10 m
[?]
m
30°

The impulse the floor exert on the box is 116 kgm/s.

The given parameters;

The final velocity of the box when it dropped to the floor is calculated as follows;

[tex]\frac{1}{2} mv^2 = mgh\\\\v^2 = 2gh\\\\v = \sqrt{2gh} \\\\v = \sqrt{2\times 9.8 \times 1.1} \\\\v = 4.64 \ m/s[/tex]

The impulse the floor exert on the box is calculated as follows;

the impulse the floor exert on the box is equal to change in momentum of the book

[tex]J = \Delta P\\\\J = \Delta Mv\\\\J = M(v_f - v_0)\\\\J = 25(4.64 - 0)\\\\J = 116 \ kgm/s[/tex]

Learn more about impulse here:https://brainly.com/question/23927723

Answer:

Explanation:

Initial vertical velocity

vy₀ = 50.0sin60 = 43.3 m/s

This initial velocity is reduced to zero by gravity in a time of

t = v/a = 43.3/9.81 = 4.41 s

h(max) = ½gt² = ½(9.81)4.41² = 95.6 m

The ball will return to earth in the same amount of time

t(max) = 2(4.41) = 8.82 s

The horizontal velocity is

vx = 50.0cos60 = 25.0 m/s

d = vt = 25.0(8.82) = 221 m

That 's one heck of a kick! No air resistance of course.

A solid such as Sugar molecules or a liquid like in water molecules or gas molecules such as oxygen and nitrogen molecules in air. Since gas molecules have the weakest intermolecular forces than other molecules in the other two states then they will be the fastest.

Answer:

gas

Explanation:

since gas is in the air I think the answer is gas

Answer:

F = - K x for spring     (note that that F here is given in grams, F = m g is correct)

K here is 100 g / cm      for the spring constant

x = -420 g / 100 g/cm = -4.2 cm

The spring would compress 4.2 cm for a total length of 20 - 4.2 = 15.8

d)  to compress the spring 6.8 cm one can see that the load would be 680 g

If the load is in the equilibrium, the magnitude of the tension in the cable is equal to 1,414.5 Newton.

Given the following data:

Scientific data:

To calculate the magnitude of the tension in the cable, if the load is in the equilibrium:

First of all, we would determine the tension caused by the horizontal component of the force:

[tex]\sum F_y ; Tcos\theta - mg=0\\\\Tcos\theta = mg\\\\T=\frac{mg}{cos\theta} \\\\T=\frac{250 \times 9.8}{cos30} \\\\T= \frac{2450}{0.8660}[/tex]

T = 2,829.1 Newton

The magnitude of the tension in the cable is given by:

[tex]\sum F_x ; F - Tsin\theta = 0\\\\F = Tsin\theta\\\\F = 2829.1sin30\\\\F = 2829.1 \times 0.5[/tex]

F = 1,414.5 Newton.

Read more on tension here: https://brainly.com/question/18792908

Explanation:

F = Icurrent×length×Bfieldstrength×sin(angle field to wire)

in our case

Icurrent = 10 A

length = 0.02km = 20 meters

B = 10^-6 T

angle = 30 degrees.

F = (20 A)(20m)(10^-6 T)×sin(30) = 400× 10^‐6 ×0.5 N =

= 200 × 10^-6 = 2 × 10^‐4 N

Answer:

An effect begins to alter movement, and the direction of moves in the circular path is known as centripetal force. Its measurable unit is Newton or Kilogram meter per square of the second. The product of mass and square of velocity divided by the radius of path travel by the body provide s the term centripetal force.

Explanation:

Answer:

An effect begins to alter movement, and the direction of moves in the circular path is known as centripetal force. Its measurable unit is Newton or Kilogram meter per square of the second. The product of mass and square of velocity divided by the radius of path travel by the body provide s the term centripetal force.

Explanation:

Answer:

d. The truck that left later was travelling faster

Explanation:

Both trucks travelled from the same place to the same place, meaning they both travelled the same distance;

They both arrive at the same time, but the second truck left later so it took less time to travel the distance than the first truck;

The only variable that can account for this difference is speed;

The one that left later, therefore, must have been going faster.

Explanation:

1 minute is 60 seconds so you multiply 60 * 15 and then multiply that answer * 2

Answer:

it shows that the properties of the elements stay the same after the reaction

it shows that the properties of the elements stay the same after the reaction

it shows that all compounds remain bonded after the reaction

it shows that all compounds remain bonded after the reaction

it shows that only physical changes follow the Law of Conservation of Mass

it shows that only physical changes follow the Law of Conservation of Mass

it shows that no atoms have been gained or lost during the reaction

it shows that no atoms have been gained or lost during the reaction

[tex]\textbf{A}\cdot\textbf{B} = 11.5[/tex]

Explanation:

The dot product between two vectors [tex]\textbf{A}[/tex] and [tex]\textbf{B}[/tex] is defined as

[tex]\textbf{A}\cdot\textbf{B} = AB\cos{\theta}[/tex]

where A and B are the magnitudes of the vectors [tex]\textbf{A}[/tex] and [tex]\textbf{B},[/tex] respectively and [tex]\theta[/tex] is the angle between the two. Since A = 3, B = 5 and [tex]\theta = 40°,[/tex] the dot product [tex]\textbf{A}\cdot\textbf{B}[/tex] is

[tex]\textbf{A}\cdot\textbf{B} = (3)(5)(0.766) = 11.5[/tex]

Answer:

Steady-state theory, in cosmology, a view that the universe is always expanding but maintaining a constant average density, with matter being continuously created to form new stars and galaxies at the same rate that old ones become unobservable as a consequence of their increasing distance and velocity of recession.

Cosmic inflation is a faster-than-light expansion of the universe that spawned many others. ... Cosmic inflation solves these problems at a stroke. In its earliest instants, the universe expanded faster than light (light's speed limit only applies to things within the universe).

The sun emits electromagnetic waves with a power of  

4.0 ∗ 10  (26)  W.

Answer:

They take the form of heat, I think thats it but I cant see if you put down any answers

Explanation:

Answer:a

Explanation:

they form hear

From Young's single slit experiment, the distance away from the wall will be 1.068 m

Given that 587.9 nm of wavelength of light passes through a single slit 0.73 mm wide, it creates a diffraction pattern.

From the question, the following parameters are given:

The wavelength of the light λ  =  587.9 nm

The width of the slit a = 0.73 mm

Fringe width X = 0.86 mm

The distance away from the wall D = ?

The fringe width is related to the wavelength  of the light source by the equation:

X = Dλ ÷ a

Substitute all the parameters into the formula

0.83 × [tex]10^{-3}[/tex] = 587.9 × [tex]10^{-9}[/tex] D ÷ 0.73 ×

Cross multiply

587.9 × [tex]10^{-9}[/tex] D = 6.278 × [tex]10^{-7}[/tex]

make D the subject of the formula

D = 6.278 × [tex]10^{-7}[/tex] ÷  587.9 × [tex]10^{-9}[/tex]

D = 1.068 m

Therefore, the distance away from the wall is 1.068 m

Learn more here: https://brainly.com/question/23801391

If the first minimum is [tex]0.86 mm[/tex] from the central maximum, the distance away is 1.07 meters.

Given the data in the question;

From Thomas Young's single slit experiment:

[tex]\frac{a*y}{L} = m * \lambda[/tex]    

Where a is the width of the slit, y is first minimum, L is the distance, m is the order number and λ is the wavelength.

We substitute our values into the equation

[tex]\frac{0.00073m\ *\ 0.00086m}{L} = 1\ *\ ( 5.879*10^{-7}m)\\\\\frac{0.0000006278m^2}{L} = 5.879*10^{-7}m\\\\L = \frac{0.0000006278m^2}{5.879*10^{-7}m} \\\\L = 1.07m[/tex]

Therefore, if the first minimum is [tex]0.86 mm[/tex] from the central maximum, the distance away is 1.07 meters.

Learn more: https://brainly.com/question/16051099

Hi there!

For this problem, we must use the conservation of angular momentum. This is an example of an inelastic "collision", so:

I₁w₁ + I₂w₂ = (I₁ + I₂)wf

We know that the moment of inertia of a disk is 1/2mR², so we can calculate the moments of inertia for both disks:

Disk 1: 1/2(2)(0.40²) = .16 kgm²/s

Disk 2: 1/2(2)(0.20²) = .04 kgm²/s

Plug in the values. Let counterclockwise be positive.

.16(-50) + .04(50) = (.16 + .04)wf

Solve:

wf = -30 rev/s

Answer:

What is kinetic friction?

Kinetic friction is defined as a force that acts between moving surfaces. A body moving on the surface experiences a force in the opposite direction of its movement.

What causes it?

When the mass is not moving, the object experiences static friction. The friction increases as the applied force increases until the block moves. After the block moves, it experiences kinetic friction, which is less than the maximum static friction.

What does it generate?

When surfaces in contact move relative to each other, the friction between the two surfaces converts kinetic energy into thermal energy (that is, it converts work to heat). This property can have dramatic consequences, as illustrated by the use of friction created by rubbing pieces of wood together to start a fire.

Answer:

True

Explanation:

It definetly is because, if we are biased it sets us up to fail on some things.

W = 25 J

Explanation:

Work done on an object is defined as

[tex]W = Fd = (10\:\text{N})(2.5\:\text{m}) = 25\:\text{J}[/tex]

Answer:

C number is write i think

This question involves the concepts of work done and the frictional force.

a. Work done by the person is "692.82 N".

b. Work done by the frictional force is "490.5 N".

a.

Work done by the person can be given by the following formula:

[tex]W=FdCos\theta[/tex]

where,

W = work done by the person = ?

F = Force applied by the person = 80 N

d = distance traveled = 10 m

θ = angle between force and motion = 30°

Therefore,

[tex]W=(80\ N)(10\ m)Cos30^o[/tex]

W = 692.82 N

b.

Work done by the frictional force is given by the following formula:

[tex]W_f=fd\\W_f=\mu mgd[/tex]

where,

[tex]W_f[/tex] = work done by the frictional force = ?

μ = coefficient of friction = 0.5

g = acceleration due to gravity = 9.81 m/s²

Therefore,

[tex]W_f=(0.5)(10\ kg)(9.81\ m/s^2)(10\ m)[/tex]

[tex]W_f=490.5\ N[/tex]

Learn more about frictional force here:

https://brainly.com/question/1714663?referrer=searchResults

Answer:

she will move in the same direction at the same speed forever.

Explanation:

If there are no outside forces like gravity the net force will never change, she will just keep flying for forever and ever! poor lady

Answer:

Explanation:

Summing moments about the CG to zero will show that the two normal forces are equal and have a value of FL = FR = 684/2 = 342 N

Pressure on the left

PL = 342 / 6.20e-4 = 551,612.9032... = 5.5e5 Pa

Pressure on the right

PR = 342 / 9.20e-4 = 371,739.1304... = 3.7e5 Pa

A) The force from the left tire is; FL = 342 N

B) The pressure from the left tire is; PL = 551613 N/m²

C) The force from the right tire is; FR = 342 N

D) The pressure from the right tire is; PR = 371739 N/m²

We see that;

FL and FR are upward forces

W is the downward force.

We know that in equilibrium;

Sum of upward forces = sum of downward forces

Thus;

FL + FR = W

We are given W = 684 N

Since W is at the center, it means that FL = FR. Thus;

FL = FR = 684/2

FL = FR = 342 N

We are given;

Contact area of left tire; AL = 6.2 × 10⁻⁴ m²

Contact area of right tire; AR = 9.2 × 10⁻⁴ m²

Formula for pressure is;

Pressure = Force/Area

Pressure on the left tire;

PL = FL/AL

PL = 342/(6.2 × 10⁻⁴)

PL = 551613 N/m²

Pressure on the t right tire;

PR = FR/AR

PR = 342/(9.2 × 10⁻⁴)

PR = 371739 N/m²

Read more at; https://brainly.com/question/21584729

Hi there!

We can use the following equation to find the frequency of each harmonic:

[tex]f_n = \frac{n}{2L} \sqrt{\frac{T}{\lambda}}[/tex]

n = nth harmonic

L = length of string (m)

T = Tension of string (N)

λ = linear density (kg/m)

Begin by converting the linear mass density to kg:

2.00g /m · 1 kg / 1000g = 0.002 kg/m

Now, we can use the equation to find the first three harmonics.

First harmonic:

[tex]f_1 = \frac{1}{2(0.6)} \sqrt{\frac{50}{0.002}} = \boxed{131.76 Hz}[/tex]

Second harmonic:

[tex]f_2 = \frac{2}{2(0.6)} \sqrt{\frac{50}{0.002}} = \boxed{263.52Hz}[/tex]

Third harmonic:

[tex]f_3 = \frac{3}{2(0.6)} \sqrt{\frac{50}{0.002}} = \boxed{395.28Hz}[/tex]

Answer:

Energy consumed is 0.00033 Joules.

Explanation:

the formula of Energy is:

Energy = power/ time.

Answer:

Explanation:

θ = arctan(56.0/76.0) = 36.4° West of North

average velocity is √(56.0² + 76.0²) / (8 + 5) = 94.4/13 = 7.26 m/s

Answer:

20 volts

Explanation:

Use the equation [tex]P=VI[/tex]

[tex]60=V(3)[/tex]

[tex]V=20[/tex]

[tex]r = 1.29×10^8\:\text{m}[/tex]

Explanation:

According to Newton's law of universal gravitation, the gravitational force between Uranus and Miranda is

[tex]F_G = G\dfrac{M_UM_M}{r^2}[/tex]

where [tex]M_U[/tex] is the mass of planet Uranus, [tex]M_M[/tex] is the mass of its satellite Miranda, r is the distance between their centers and G is the universal gravitational constant. Moving the variable r to the left side, we get

[tex]r^2 = G\dfrac{M_UM_M}{F_G}[/tex]

Taking the square root of the equation above, we get

[tex]r = \sqrt{G\dfrac{M_UM_M}{F_G}}[/tex]

Plugging in the values, we get

[tex]r = \sqrt{(6.67×10^{-11}\:\text{N-m}^2{\text{/kg}}^2)\dfrac{(8.68×10^{25}\:\text{kg})(6.59×10^{19}\:\text{kg})}{2.28×10^{19}\:\text{N}}}[/tex]

[tex]\:\:\:\:\:=1.29×10^8\:\text{m}[/tex]

We have that for the Question "a)what is the resistivity in (ohm-cm) of the material? b) what is the resulting conductivity "type" and what is the mobility of these "majority" carriers in this material"

Answer:

From the question we are told

This layer is 0.10 cm thick and cut into a strip 0.50 cm wide by 1.50 cm long. The intrinsic carrier concentration of the silicon at room temperature (300K) is 1.0x1010/cm3 and the bandgap energy is 1.12 eV.

A) Resistivity is given as,

[tex]p = \frac{RA}{l}[/tex]

where,

[tex]R = \frac{V}{I}[/tex]

Therefore,

[tex]p = \frac{VA}{Il}\\\\p = \frac{1*(0.1*0.5)}{0.019*1.5}\\\\p = 1.754 ohm-cm[/tex]

B) Conductivity is given as,

[tex]U = \frac{\rho}{pe}\\\\U = \frac{10^{17}}{10^{10}*1.6*10^{-19}}\\\\U = 6.25*10^{25} cm^3/V-s[/tex]

For more information on this visit

https://brainly.com/question/23379286