Un motor eléctrico consume 10A de corriente de un circuito de 120v. Calcular la potencia y el trabajo que suministra al motor durante 5hrs de funcionamiento:
A) P=0.9 kw, T=6 kwh
B) P=0.85 kw, T=4 kwh
C) P=1.2 kw, T=3 kwh
D) P=1.2 kw, T=6 kwh

Answers

Answer 1

Answer:

D. P=1.2 kw, T=6kwh

Explanation:

P = A × V

P = 120×10

= 1200 watts or 1.2 kw

T = Watts × hr

1000

= 1200 × 5

1000

= 6 kwh


Related Questions

Thunder is heard 7.2 seconds after a bolt of lightning is observed. if the speed of sound is 349 m/s, how far away did the lightning strike?

Answers

Answer:

2512.8 meters

Explanation:

s=d/t

by using speed formula

A builder drops a brick from a height of 15 m above the ground. The gravitational field strength g is 10 N/ kg. What is the speed of the brick as it hits the ground?

Answers

The speed of the brick dropped by the builder as it hits the ground is 17.32m/s.

Given the data in the question;

Since the brick was initially at rest before it was dropped,

Initial Velocity; [tex]u = 0[/tex]Height from which it has dropped; [tex]h = 15m[/tex]Gravitational field strength; [tex]g = 10N/kg = 10 \frac{kg.m/s^2}{kg} = 10m/s^2[/tex]

Final speed of brick as it hits the ground; [tex]v = \ ?[/tex]

Velocity

velocity is simply the same as the speed at which a particle or object moves. It is the rate of change of position of an object or particle with respect to time. As expressed in the Third Equation of Motion:

[tex]v^2 = u^2 + 2gh[/tex]

Where v is final velocity, u is initial velocity, h is its height or distance from ground and g is gravitational field strength.

To determine the speed of the brick as it hits the ground, we substitute our giving values into the expression above.

[tex]v^2 = u^2 + 2gh\\\\v^2 = 0 + ( 2\ *\ 10m/s^2\ *\ 15m)\\\\v^2 = 300m^2/s^2\\\\v = \sqrt{300m^2/s^2}\\ \\v = 17.32m/s[/tex]

Therefore, the speed of the brick dropped by the builder as it hits the ground is 17.32m/s.

Learn more about equations of motion: https://brainly.com/question/18486505

If you create an equilibrium mixture from f e 3 and s c n − ions, adding c l − ions will choose. Highlight_off because choose. Highlight_off

Answers

Since chloride ions are not part of the ionic equilibrium, addition of chloride ions will only increase the concentration of the anions in the solution.

What is ionic equilibrium?

An ionic equilibrium is an equilibrium that exists between two or more ions in an aqueous solution.

The ionic equilibrium between iron (iii) ion and thiocyanate ions is given below:

[tex]Fe^{3+}\rightleftharpoons SC \: N^{-}[/tex]

From the principle of equilibrium, addition of either ions in the ionic equilibrium will alter equilibrium position to the left or right.

Addition of chloride ions, Cl- which is not a part of the ionic equilibrium will only increase the concentration of the anions in the solution.

Learn more about ionic equilibrium at: https://brainly.com/question/13879496

The chloride ions are not part of the ionic equilibrium, adding them to the solution will merely raise the concentration of anions.

What is equilibrium?

When a chemical reaction does not convert all reactants to products, it reaches equilibrium. Many processes attain a state of balance, or dynamic equilibrium, in which both reactants and products are present.

The following is the ionic equilibrium between iron (III) ion+ and thiocyanate ions:

[tex]\rm Fe^{3+} \rightleftharpoons SC \ N^{-}[/tex]

The addition of either ion in the ionic equilibrium will shift the equilibrium position to the left or right, according to the principle of equilibrium.

The inclusion of chloride ions, Cl-, which are not components of the ionic equilibrium, increases the levels of anions in the solution.

Thus, the chloride ions are not part of the ionic equilibrium, adding them to the solution will merely raise the concentration of anions.

Learn more about the equilibrium here:

https://brainly.com/question/13458865

#SPJ4

The driver of a pickup truck accelerated at a rate of -5 m/s2 in 2.0 seconds. What was his net change in velocity?

Answers

Explanation:

a= -5m/s^2 t=2s

a= v-u

-------

t

at=v-u

(-5x2)

= -10m/s

The electrical loads in _____ circuits each have the same voltage drop, with equals the total applied voltage of the circuit.

Answers

Answer:

The electrical loads in parallel circuits each have the same voltage drop, with equals the total applied voltage of the circuit.

Explanation:

I did some research and the voltage drop across any branch of a parallel circuit is the same as the applied voltage.

(What
pressure does water
exert at the bottom of
the container in the
Water
(1000 kg/m)
5m
adjoining figure?) (g
=9.8 m/s2)

Answers

Answer:

49,000 Pa

Explanation:

Pressure in liquid=depth x density x g

                            = 5 x 1000 x 9.8

                            = 49,000Pa

What would happen if you placed a compass near an electromagnet when there is an electric current in the coil of the electromagnet? Why would this happen? What if you flipped the electromagnet around so the end that was closest to the compass is now farthest away?​

Answers

Answer:

Here's the answer

Explanation:

since an electromagnet has a magnetic field, it will always follow the electromagnet.

Imagine that you are a circus performer riding a uni-cycle (forwards) across the stage. What is the direction of the angular velocity of the single wheel?

Answers

The direction of the angular velocity of the single wheel is the clockwise direction

Angular velocity

The angular velocity is the number of revolutions per second of the single wheel. It is given by ω = v/r where

v = linear speed of the wheel and r = radius of the wheel.Direction of the angular velocity of the single wheel

Since the wheels moves forward and the velocity of the wheel is always tangential to the wheel causing it to move forward, its angular velocity is in the clockwise direction

So, the direction of the angular velocity of the single wheel is the clockwise direction

Learn more about angular velocity here:

https://brainly.com/question/20912191

The angular velocity is also known as the rotational velocity. The direction of the angular velocity of the single wheel is clockwise.

What is angular velocity?

The angular velocity or rotational velocity, also known as the angular frequency vector, is a vector measure of rotation rate that relates to how fast an item spins or revolves relative to another point, i.e. how quickly the angular position or orientation of an object changes with time.

[tex]\omega = \dfrac vr[/tex]

where v is the velocity and r is the radius.

The Direction of angular velocity is that the wheel goes forward and the velocity of the wheel is always tangential to the wheel, forcing it to move forward, therefore, the angular velocity is clockwise.

Hence, the direction of the angular velocity of the single wheel is clockwise.

Learn more about Angular Velocity:

https://brainly.com/question/13649539

#SPJ4

How many ounces in a cup?

Answers

Answer:

8 oz

Explanation:

It’s going to be 8 oz because is a cup there are exactly 8 oz,


Hope this helps have a blessed day!

What happens to force when two charges move away?

Answers

If the distance between the two charges is doubled, the attraction or repulsion becomes weaker.

Explanation:


What is the direction of the normal contact force of the road on the wheels?
Tick one box.
Down
Left
Right
Up

Answers

The direction of the normal contact force of the road on the wheels is : ( B ) Left

Contact force

The contact force of the road on the wheels will act in a direction opposite to the movement of the wheel on the road. therefore as the wheel moves forward ( right ), the contact force will move backwards ( left ) of the direction of motion.

Hence we can conclude that the direction of the normal contact force of the road on the wheels is : ( B ) Left

Learn more about contact force : https://brainly.com/question/18451249

#SPJ2

A 1.2-kg hot iron sphere with heat capacity
576 J °C-1 is cooled by immersing it in a tank of
water (Fig g). (See the photo that I uploaded)The mass of the water is 3 kg and
its initial temperature is 12 °C. After 5 minutes,
both the iron sphere and the water reach a final
temperature of 15 °C.

(a) Find the energy gained by the water.
(b) Find the average rate of energy transfer from
the iron sphere to the water.
(c) What is the initial temperature of the iron
sphere?

Answers

Given the data from the question, the heat gained by the water, the rate of energy transfer and the initial temperature of the iron are:

A. The energy gained by the water is 37656 J

B. The average rate of energy transfer from

the iron sphere to the water is 125.52 J/s (Watts)

C. The initial temperature of the iron

sphere is 65.4° C

A. How to determine the heat gained Mass of water (M) = 3 Kg = 3 × 1000 = 3000 gInitial temperature (T₁) = 12 °C Final temperature (T₂) = 15 °Change in temperature (ΔT) = 15 – 12 = 3 °C Specific heat capacity (C) = 4.184 J/gºC Heat (Q) =?

Q = MCΔT

Q = 3000 × 4.184 × 3

Q = 37656 J

B. How to determine the rate of energy transfer Heat (Q) = 37656 JTime (t) = 5 min = 5 × 60 = 300 sPower (P) =?

Power = energy / time

Power = 37656 / 300

Power = 125.52 J/s (Watts)

C. How to determine the initial temperature of the iron Mass of iron (M) = 1.2 Kg = 1.2 × 1000 = 1200 gHeat capacity (C) = 576 J/ºC Heat (Q) = 37656 JTemperature (T) =?

Q = CT

37656 = 576 × T

Divide both side by 576

T = 37656 / 576

T = 65.4° C

Learn more about heat transfer:

https://brainly.com/question/10286596

With a class 1 lever, does mechanical advantage increase or decrease as the fulcrum is moved closer to the load? Explain why. ​

Answers

Answer:

L1 F1 = L2 F2   explains balancing torques

F1 = load = counterclockwise torque

F2 = applied force - clockwise torque

L represents distances from fulcrum to the applied forces

F2 = F1 * (L1 / L2)                (I)

MA mechanical advantage = (L2 / L1)     load over applied force

We can rewrite equation (I) as

load force / applied force = applied distance / load distance

As the fulcrum is moved closer to the load L1 decreases and L2 increases which corresponds to an increase in MA

11. Which of the following is a type of energy
that is not involved in the human body's
everyday processes?
A. mechanical energy
B. nuclear energy
C. thermal energy
D. chemical energy

Answers

Answer:

nuclear

Explanation:

A: a type of mechanical energy is kinetic, which comes from velocity/movement

C: people produce heat

D: converting food energy into usable energy within the body

name one type of energy the washing machine wastes when spinning the clothes

Answers

Answer:

Electrical Energy

The Electricity Rotates the spinning part of Washing machine and It spinns clothes.

Velocity of an object of mass 5 kg increases from 3 m/s to 7 m/s on applying a force continuously for 2 s. Find out the force applied. If the duration for which force acts is extended to 5 s, what will be the velocity of the object then?​

Answers

Answer:

Force=10N

Velocity=13m/s

Explanation:

Given,

Mass = 5kg

initial velocity=3m/s

Final velocity=7m/s

Time=2s

Now acceleration= v-u/t

=7-3/2

=4/2

=2m/s²

So, acceleration=2m/s²

Now,

F=ma

=5*2

=10N

The physical meaning of 220 volts​

Answers

Answer:

a particular level of electical potential from a power source

Conduction is greater in solids .explain in your own words Why?

Answers

Explanation:

because conduction takes place in objects whose particles are close/touching each other therefore conduction happens in solid as liquid and gas paricles are not close to each other

3. Describe comets and their orbits in the solar system.

Answers

Answer:

Comets have an extremely eccentric orbit around the Sun. They can travel hundreds of thousands of years through the solar system before returning to the Sun at perihelion. Comets, like all orbiting bodies, obey Kepler's Laws, which state that the closer they get to the Sun, the faster they move.

A comet is a dirty snowball many kilometers across that exists at a considerable distance from the Sun. However, when it gets closer to the Sun, the comet's surface warms up, causing its components to melt and vaporize, resulting in the comet's distinctive tail. The distance between the Earth and the Sun can be measured in comet tails.

If a satelite with a mass of 9 x 10^2 kg is placed in an orbit around a planet with a mass of 6 x 10^20 kg, at a speed of 17000 m/s, find the distance from the center of the planet to the satelite.

Answers

Hi there!

We can begin by deriving an equation for the orbital radius.

For an object orbiting the earth, it is experiencing a centripetal force due to the force of gravitation.

Recall Newton's Law of Universal Gravitation:
[tex]F_g = \frac{Gm_1m_2}{r^2}[/tex]

G = Gravitational Constant (6.67 × 10⁻¹¹ Nm²/kg²)

m = masses (kg)
r = radius (m)

This is equivalent to the satellite's centripetal force experienced:

[tex]F_c = \frac{m_sv^2}{r}[/tex]

[tex]m_s[/tex] = mass of satellite (kg)

v = velocity (m/s)

r = radius (m)

Set the two equal, and rearrange for the orbital radius of the satellite.

[tex]\frac{Gm_sm_p}{r^2} = \frac{m_sv^2}{r}\\\\\frac{Gm_p}{r} = v^2\\\\r = \frac{Gm_p}{v^2}[/tex]

Notice that the orbital radius of the satellite does NOT depend on the satellite's mass. (we canceled it out).

Now, plug in the given values.

[tex]r = \frac{(6.67\times 10^{-11})(6\times 10^{20})}{17000^2} = \boxed{138.478 m}[/tex]

what is the frequency of a light wave that has a wavelength of 0.039 m?

Answers

Answer:

Convert your wavelength into meters. Divide the speed of light, ~300,000,000 m/s, by the wavelength in m. This gives you the wave's frequency

Explanation:

does a five pound ball weigh more or less 40000 miles above sea level​

Answers

It would weigh less bc the higher you are the less gravity there is.

At a distance of 1.0 A.U. The earth takes 1.0 year to travel around the sun how far away is a planet that takes 64 years ro go around the sun

Answers

Answer:

This is from another brainly question so I hope this helps :)

The earth takes 1 year to orbit the sun and is about 150, 000, 000km. Given that, use the rule of 3 to find your answer:

1 - 150, 000, 000

64 - x

(150, 000, 000 * 64) / 1= x

9, 600, 000, 000 / 1

9, 600, 000, 000 km.

A planet located 9, 600, 000, 000 km from the sun takes about 64 years to complete its orbit around the sun.

7. Why are cooking pans made of aluminum? {Explain using the specific heat value of
aluminum} it conducts heat well high thermal energy

Answers

Cooking utensils, such as pots, pans and menu trays, are often made from aluminium because it is lightweight and conducts heat well, making it energy-efficient for heating and cooling. These properties also make it a preferred material for packaging.

If you wanted to melt ice, then heat it up, and get the water to just barely vaporize, how many equations would you need to solve for the energy used in this procedure?

Answers

Two equations will be needed to solve for the energy used in this procedure.

What is Energy?

This is defined as the ability or capacity to do work. Ice being converted to vapor requires energy and the equations are seen below:

H₂O₍s₎  ⇒ H₂O₍l₎

H₂O₍l₎ ⇒ H₂O₍g₎

These are the equations which are used to calculate energy with heat being involved in both reactions.

Read more about Energy here https://brainly.com/question/19666326

the earth exerts a gravitational force of 850N on John. What is Johns mass in kg

Answers

Answer:

86.73 kg

Explanation:

Remember that F=mg

Let's plugin our numbers

850N=m9.8m/s^2

850N=9.8m/s^2m

86.73=m

A ball that has a mechanical energy of 65 J haas 10 j of kinetic energy. The ball has j of potential energy

Answers

Answer:

55 j

Explanation:

Mechanical energy = kinetic + potential

                  65          = 10 + P.E.

                    55 j = PE

A weight of 200 n is hung from a spring with a spring constant of 2500 n/m and lowered slowly. How much will the spring stretch?

Answers

8n/m this is because 200×2500 all over 100 . 0's will cancile 0's living 200×2500×1 ,25 will go into 200 8 times ×1 =8n/m

The length by which the spring got stretched will be 0.08 m. The force is directly propotional to the distance by which the spring stretched.

What is spring force?

The force required to extend or compress a spring by some distance scales linearly with respect to that distance is known as the spring force. Its formula is

F = kx

The given data in the problem is;

F is the spring force =200

K is the spring constant= 2500 N/m

x is the length by which spring got stretched =?

The stretch of the spring is found as;

[tex]\rm F=kx \\\\ x = \frac{F}{k} \\\\\ x= \frac{200}{2500} \\\\ x=0.08 \ m[/tex]

Hence the length by which the spring got stretched will be 0.08 m.

To learn more about the spring force refer to the link;

https://brainly.com/question/4291098

#SPJ4

Why wouldn’t you move during an earthquake?

Answers

Answer:

So you maybe don't fall, have something fall on you, and for a bunch of different reasons. EARFQUAKES are really dangrous.

Explanation:

Hope this helps you!

explain why the age of the ocean floor bedrock increases as the distance from the mid-atlantic ridge increases?

Answers

Answer:

The age of the bedrock increases the further you get away from the mid atlantic ridge because it is at the ridge that the new bedrock is formed. At the Ridge, the diverging plates cause magma to rise up and harden, forming new bedrock. As this happens, the older bedrock is pushed outwards, further and further away from the Ridge.

Explanation:

Hope it helps.

Other Questions
What helped scientists uncover the HIV virus? 32 divided by 10-8 divided by 2-3 Please help,Explain the difference in the way that Jews were treated compared to German citizens. please answer (20 points) please help it is very important What caused changes to the traditional American culture after World War II ended? Two angles are supplementary angles.One angle measures 58. The other anglemeasures (3n + 5) What is the value of n?A.) 9B.) 32C.) 39D.) 122 Polygon ABCD has the following vertices a (-3,3), B(5,5), C (5, -4) and D (-3, -4) calculate the area of the polygon. five words which begin with the prefix UN please help me I will mark BRAINLIEST Help pleazeeeeee! I need this as soon as possible Identify the sentence containing the correct usage of commas.A) Tom, Joe, and Dan went to the movie, played miniature golf, and listened to music.B) Mary and Tom ate a hamburger, french fries and corn for lunch.C) Tom, Joe and Dan went to the movie on Saturday. Im stuck, HELP3(6) + 4(2)^3 - 5 Find the value of the expression. Question 9 of 12What is cos 60?A. 13B. 1C.2D.2.E.NS-F. V ___________ in the stomach are responsible for the mechanical digestion that takes place there. What are the solutions to problems caused by nitrogen gas in solution at certain depths?Please Help!!!! 50 points Please answer, thanks! Near the end of "Better Wait Till Martin Comes," when all the cats repeat the phrase, "Better wait till Martin comes, it creates a feeling ofA. dread.B. boredom.C. impatience.D. sorrow. According to einstein, nothing in the universe can move faster than which approximate speed? 1.0 107 m/s 1.0 108 m/s 3.0 108 m/s 3.0 109 m/s