Two pipes can fill a tank in 12 minutes & 15 minutes respectively. If first pipe is changed with a pipe having twice of its radius while second with a pipe having half of second’s radius. Now the tank will be filled in:

Answer:

What does the circled part of the picture represent?

A)  a point

B)  a line

C)  line segment

D)  ray

Step-by-step explanation:

it is a btw

Existence and uniqueness of solutions to systems of differential equations depend on the number of equations and the order of each equation. For example, a system of two first-order equations has a unique solution, while a system of three first-order equations may not have a unique solution.

Previously, we considered the scalar differential equation, which is a single differential equation involving only one independent variable. In this case, the solution to the equation is unique. This is because there is only one equation and only one variable, so the solution must be unique for a given set of initial conditions.

For a system of differential equations, the existence and uniqueness of solutions depend on the number of equations and the order of each equation.

Systems of differential equations with higher order equations or more equations than unknowns may not have a unique solution. On the other hand, if there are more unknowns than equations, then there is always a unique solution. To find the solution, the equations must be solved simultaneously.

In conclusion, A scalar differential equation always has a unique solution.

Know more about differential equations here:

https://brainly.com/question/1164377

#SPJ11

If a large diamond with a mass of 4289.6 grams was recently discovered in a mine and the density of the diamond is 3.51 grams over centimeters cubed, the volume is 1221.9 cm³.

To find the volume of the diamond, we need to use its mass and density. The density of the diamond is given as 3.51 grams per cubic centimeter. This means that every cubic centimeter of diamond has a mass of 3.51 grams.

We can use this information to find the volume of the diamond by dividing its mass by its density. Plugging in the given values, we get:

Volume = Mass / Density

Volume = 4289.6 g / 3.51 g/cm³

Volume = 1221.86 cm³

This means that the diamond has a volume of 1221.86 cubic centimeters. However, the question asks us to round the answer to the nearest hundredth, so we round this value to: Volume = 1221.9 cm³

To know more about volume, refer here:

https://brainly.com/question/29762858#

#SPJ11

Finding the volume of a figure is a useful tool for solving practical problems that involve 3D space and quantities, such as capacity, mass, or density.

Finding the volume of a figure is a common mathematical calculation used in various fields, such as architecture, engineering, physics, and chemistry. The volume of a figure is a measure of the amount of space that it occupies in three-dimensional (3D) space, such as a cube, a cylinder, a sphere, or a complex shape.

One example of a question that can be answered by finding the volume of a figure is "How much water can a swimming pool hold?" The swimming pool is a 3D figure that can be approximated as a rectangular prism, with a length, width, and depth. By multiplying these three dimensions, we can find the volume of the swimming pool, which represents the amount of water it can hold. This information is useful for designing and constructing the swimming pool, as well as for filling and maintaining it.

Another example is "How much concrete is needed to build a retaining wall?" The retaining wall is a 3D figure that can be approximated as a trapezoidal prism, with a length, height, and thickness. By multiplying these three dimensions, we can find the volume of the retaining wall, which represents the amount of concrete required. This information is useful for estimating the cost and resources needed for the project.

Learn more about volume here:

https://brainly.com/question/1578538

#SPJ4

[tex] \bf Question :- \\ [/tex]

what is the value of expression

when g=4 and h=2

[tex] \bf Solution :- \\ [/tex]

[tex] \longrightarrow \: \: \frac{1}{4} (16 + g) - h \\ \\ \longrightarrow \: \: \frac{1}{4} (16 + 4) - 2 \\ \\ \longrightarrow \: \: \frac{1}{{ \cancel{4} }} \times( \cancel{ 20)} - 2 \\ \\ \longrightarrow \: \: 1 \times 5 - 2 \\ \\ \longrightarrow \: \: 1 \times 3 \\ \\ \longrightarrow \: \: 3 \\ [/tex]

Henceforth, Option c is the required answer.

Answer:

90$

Step-by-step explanation:

We need to find 15% of the number 600:

[tex] \frac{600 \times 15\%}{100\%} = 90 [/tex]

So, the answer is 90$

The graph of the function has zeros of 0 and 3, two distinct real zeros, and no complex zeros.

What is a function?

It is defined as a special type of relationship and they have a predefined domain and range according to the function.

We have a function:

y= x²(x² - 6x + 9)

We can write it as a:

y=x²(x-3)²

To find the zeros equate to the function with the zero.

y = 0

x²(x-3)² =0



First, take  x²=0  we get:

x = 0

Now

(x - 3)² =0

x - 3 = 0

x = 3

Thus, the graph of the function has zeros of 0 and 3, two distinct real zeros, and no complex zeros.

Learn more about the function here:

brainly.com/question/5245372

#SPJ1

Kayla would ultimately spend $210.91 + $14.76 = $225.67 for all the clothing items, including sales tax.

To determine if Kayla's budget will be enough to purchase all the clothing items listed after sales tax is applied, we need to calculate the total cost of the items first.

The cost of 2 T-shirts would be 2 x $9.98 = $19.96.

The cost of 3 dresses would be 3 x $24.99 = $74.97.

The cost of 1 pair of pants would be $25.99.

The cost of 1 pair of shoes would be $89.99.

Therefore, the total cost of the clothing items is $19.96 + $74.97 + $25.99 + $89.99 = $210.91.

Next, we need to add the sales tax rate of 7% to the total cost to find the final price that Kayla would pay.

7% of $210.91 = $14.76

Therefore, the final price that Kayla would pay for all the clothing items, including sales tax, is $210.91 + $14.76 = $225.67.

Since Kayla's budget is $200, she would not have enough money to purchase all of the clothing items listed after sales tax is applied.

To learn more about total cost refer to:

brainly.com/question/6506894

#SPJ4

[tex]36 cm^3[/tex] of pure alcoh ol must be added to the [tex]10 cm^3[/tex] of the 8% solution to obtain [tex]10 + 36 = 46 cm^3[/tex] of an 80% solution.

What is Algebraic expression ?

Algebraic expression can be defined as combination οf variables and constants

Let's first calculate the amount  of pure alcohol in the 8% solution:

Amount of pure alcohol = 8%  of [tex]10 cm^3 = 0.08 x 10 cm^3 = 0.8 cm^3[/tex]

N ow, let's  assume [tex]x cm^3[/tex]of pure alcohol must be added to the 10 cm^3 of the 8% solution to obtain a total volume of [tex]10 + x cm^3[/tex] of an 80% solution. The amount of pure alcohol in the final solution would be:

ο[tex](10 + x) cm^3 = 0.8 (10 + x) cm^3[/tex]

Since we started with [tex]0.8 cm^3[/tex]of pure alcohol and we want to end up with  

[tex]0.8 (10 + x) cm^3[/tex], we can set up the following equation:

[tex]0.8 + x = 0.8 (10 + x)[/tex]ο

Simplifying and solving for x, we get:

[tex]0.8 + x = 8 + 0.8x[/tex]

[tex]0.2x = 7.2[/tex]

[tex]x = 36[/tex]

Therefore, [tex]36 cm^3[/tex] of pure alcohol must be added to the [tex]10 cm^3[/tex]of the 8% solution to obtain [tex]10 + 36 = 46 cm^3[/tex] of an 80% solution.

To learn more about Algebraic expression from given link.

brainly.com/question/953809

#SPJ1

Answer:

36cm^3

Step-by-step explanation:

Answer:

this is the answer to that problem

The standard deviation is σX ≈ 1.936 (rounded to at least three decimal places).

Standard deviation (σX) is a measure that is used to quantify the amount of variation or dispersion of a set of data values. Here is how to compute it from the given data:\begin{tabular}{cc} \hline Number of Hours & Frequency \\ \hline 0 & 127 \\ 1 & 176 \\ 2 & 348 \\ 3 & 252 \\ 4 & 328 \\ 5 & 239 \\ 6 & 139 \\ 7 & 27 \\ 8 & 60 \\ \hline Total & 1696 \end{tabular}(b) Compute the standard deviation σX​. Round the answer to at least three decimal places.The formula to use is:\[\sigma_X = \sqrt{\frac{\sum f(x_i - \overline{x})^2}{n}}\]where:σX = standard deviation∑ = sum off = frequencyxi = value of i-th datan = total number of data\[\overline{x} = \frac{\sum fx}{n}\]is the sample mean, which we must calculate first.\[\overline{x} = \frac{\sum fx}{n} = \frac{0\cdot127 + 1\cdot176 + 2\cdot348 + 3\cdot252 + 4\cdot328 + 5\cdot239 + 6\cdot139 + 7\cdot27 + 8\cdot60}{1696} \approx 2.7875\]Substituting into the standard deviation formula:\[\sigma_X = \sqrt{\frac{\sum f(x_i - \overline{x})^2}{n}} = \sqrt{\frac{0\cdot(127 - 2.7875)^2 + 1\cdot(176 - 2.7875)^2 + 2\cdot(348 - 2.7875)^2 + 3\cdot(252 - 2.7875)^2 + 4\cdot(328 - 2.7875)^2 + 5\cdot(239 - 2.7875)^2 + 6\cdot(139 - 2.7875)^2 + 7\cdot(27 - 2.7875)^2 + 8\cdot(60 - 2.7875)^2}{1696}} \approx 1.936\]Therefore, the standard deviation is σX ≈ 1.936 (rounded to at least three decimal places).

Learn more about Standard

brainly.com/question/15287326

#SPJ4

The customer will pay R108 for the screwdriver set.The trader bought a screwdriver set for R90 and added 20% to the cost price for profit and expenses. To calculate the amount a customer will pay for the screwdriver set, we need to add the profit and expenses to the cost price.

First, let's calculate the profit and expenses added by the trader. Since the trader added 20% to the cost price, the profit and expenses will be:

20% of R90 = 0.2 x R90 = R18

Now, we can calculate the selling price of the screwdriver set by adding the cost price and the profit and expenses:

Cost price = R90

Profit and expenses = R18

Selling price = Cost price + Profit and expenses = R90 + R18 = R108

Therefore, the customer will pay R108 for the screwdriver set.

Find out more about profit

brainly.com/question/22780682

#SPJ1

9.  A normally distributed data set has a µ = 10, the z score for 10 is 0.

10. It is true that the standard deviation is needed to convert a raw score to a z-score.

11. The total percentage between a standard deviation of -2 and 1 is given as follows: 81.85%.

The z-score of a measure X of a variable that has mean symbolized by [tex]\mu[/tex] and standard deviation symbolized by [tex]\sigma[/tex] is obtained by the rule presented as follows:

[tex]Z = \frac{X - \mu}{\sigma}[/tex]

The z-score for the mean is given as follows:

Z = 0/s

Z = 0.

The p-values relative to z-scores between -2 and 1 are given as follows:

Hence the percentage is given as follows:

84.13 - 2.28 = 81.85%.

More can be learned about the normal distribution at https://brainly.com/question/25800303

#SPJ1

The constraints as a system of linear inequalities include the following;

x + y ≤ 180

x ≥ 40

y ≥ 40

3x + 4y ≤ 640

75x + 60y ≤ 12,900

The solution set for the system of linear inequalities is shown in the coordinate plane below.

In order to write a system of linear inequalities to describe this situation, we would assign variables to the number of SOS Smartcall produced in one day and number of SOS Basic produced in one day respectively, and then translate the word problem into algebraic equation as follows:

Based on the information provided about this cell phone company, the constraints can be written as a system of linear inequalities as follows;

x + y ≤ 180

x ≥ 40

y ≥ 40

3x + 4y ≤ 640.

75x + 60y ≤ 12,900

Read more on inequality here: brainly.com/question/28748540

#SPJ1

The null hypothesis and alternative hypothesis for the population mean µ are identified for the given research hypotheses.

The null hypothesis and alternative hypothesis for the population mean µ are as follows:a) H0: µ ≥ 14; H1: µ < 14b) H0: µ ≤ $4.50; H1: µ > $4.50c) H0: µ ≥ $5000; H1: µ < $5000d) H0: µ = 60; H1: µ ≠ 60 Research hypotheses that are to be substantiated by sample data are as follows:a) The mean time a health insurance company takes to pay claims is less than 14 working days.Null hypothesis H0: µ ≥ 14 Alternative hypothesis H1: µ < 14b) The average person watching a movie at a local multiplex theater send over $4.50 on refreshments.

Null hypothesis H0: µ ≤ $4.50 Alternative hypothesis H1: µ > $4.50c) The mean hospital bill for birth in the city is less than $5000.Null hypothesis H0: µ ≥ $5000 Alternative hypothesis H1: µ < $5000d) The mean time between purchases of a brand of mouthwash by loyal customers is different from 60 days.Null hypothesis H0: µ = 60 Alternative hypothesis H1: µ ≠ 60 Hence, the null hypothesis and alternative hypothesis for the population mean µ are identified for the given research hypotheses.

Learn more about Hypotheses

brainly.com/question/18173488

#SPJ4

The perimeter of the triangle is  72 √5 / 3 units.

The perimeter of a triangle is the sum of the whole three sides of the triangle. The triangle above is an equilateral triangle.

An equilateral triangle has all it sides and angles congruent to each other.

Therefore, the perimeter of the triangle can be found as follows:

Let's find the side of the triangle using trigonometric ratios,

sin 60 = opposite / hypotenuse

sin 60 = 4√15 / h

cross multiply

h = 4√15 ÷ √3 / 2

h = 4√15 × 2 / √3

h = 8√15 / √3

Hence,

hypotenuse side = 8√45 / 3

perimeter of the triangle = 8√45 / 3 + 8√45 / 3 + 8√45 / 3

perimeter of the triangle = 8√45 + 8√45 + 8√45 / 3

perimeter of the triangle = 24√45 / 3

perimeter of the triangle = 72 √5 / 3 units

learn more on perimeter here: https://brainly.com/question/29027790?referrer=

#SPJ1

Step-by-step explanation:

If I=Prt

I is interest earned

P is principal

R is the interest rate

T is time in years

Then substitute the values into the equation

Plug into your calculator

I= 100 x 6% x 3 = 18

Answer for the first one is $18

For the others, it requires you to rearrange the equation.

Good luck!

Answer:

hey will you be my friend

I yes then text me

The equation of the function that is graphed as line b is,

⇒ y = - 2x - 1

The equation of line in point-slope form passing through the points

(x₁ , y₁) and (x₂, y₂) with slope m is defined as;

⇒ y - y₁ = m (x - x₁)

Where, m = (y₂ - y₁) / (x₂ - x₁)

Given that;

Two points on the line b are (- 1, 1) and (- 2, 3).

Now,

Since, The equation of line passes through the points ( (- 1, 1) and (- 2, 3).

So, We need to find the slope of the line.

Hence, Slope of the line is,

m = (y₂ - y₁) / (x₂ - x₁)

m = (3 - 1)) / (- 2 + 1)

m = 2 / - 1

m = - 2

Thus, The equation of line with slope - 2 is,

⇒ y - 1 = - 2 (x + 1)

⇒ y - 1 = - 2x - 2

⇒ y = - 2x - 1

Therefore, The equation of the function that is graphed as line b is,

⇒ y = - 2x - 1

Learn more about the equation of line visit:

https://brainly.com/question/18831322

#SPJ5

Answer:   [tex]\frac{10}{100}[/tex]× 100

Step-by-step explanation:

Answer:

10/100 = 10%

Step-by-step explanation:

10/100 = 0.1

0.1 * 100 = 10%

Answer:

Step-by-step explanation:

2.02

x=21 so replace x with 21

3(21)+y/z

then do the same with y and z

3(21)+36/49

63+36/49

99/49

SOLUTION 2.02

The Eiffel Tower is approximately 919 feet tall to the nearest foot.

We can use trigonometry to solve this problem.

Let's assume that the height of the Eiffel Tower is h feet.

From the problem, we know that Mai is 80 feet away from the base of the tower and looking up at an angle of 85.7 degrees. We can use the tangent function to relate the height of the tower to the angle and distance:

tan(85.7) = h/80

We can solve for h by multiplying both sides by 80:

h = 80 × tan(85.7)

Using a calculator, we get:

h ≈ 919.4 feet

Therefore, the Eiffel Tower is approximately 919 feet tall to the nearest foot.

for such more question on trigonometry

https://brainly.com/question/13729598

#SPJ4

The expression is always positive Philip's statement is always true.

The expression -p + 5 + p can be written as -p + 5 + p = -p + p + 5,

which simplifies to 5, no matter what the value of p is.

An expression is a mathematical phrase that can contain numbers, variables, and operations such as addition, subtraction, multiplication, and division. Expressions may or may not have an equal sign. Expressions can be evaluated by replacing any variables with specific values and then simplifying the resulting expression using the order of operations.

Therefore, the expression is always positive and Philip's statement is correct.

To learn more about Expression :

https://brainly.com/question/1859113

#SPJ11

For the given fraction, "Yes" for 8/18 and 12/27, and "No" for 20/36 and 24/45.

The first step in determining whether fractions are equivalent is to simplify them. This involves finding the greatest common factor (GCF) of the numerator and denominator, and dividing both by it. Simplifying fractions allows us to express them in their simplest form, making it easier to compare them to other fractions.

Let's start by simplifying the given fractions:

20/36 = 5/9

8/18 = 4/9

24/45 = 8/15

12/27 = 4/9

As we can see, two of the fractions simplify to 4/9, while the other two do not.

To know more about fraction here

https://brainly.com/question/10354322

#SPJ4

Answer: First 2 questions are 12.5% and the third is 25%

Step-by-step explanation: Add up all the possibilities then take the desired possibility and divide by the total possibilities then multiply by 100  

The exact value of sin−1(cos(1013​π)) is sin−1(1 / (2sin(1013π) - cos(1013π) + 1)).

To find the exact value of sin−1(cos(1013​π)), we need to use the identity sin^2(x) + cos^2(x) = 1. Since sin−1(cos(1013​π)) is an angle whose sine is cos(1013​π), we can let that angle be x: sin(x) = cos(1013π).Let's find the sine of x using the identity sin^2(x) + cos^2(x) = 1:sin^2(x) + cos^2(x) = 1sin^2(x) + (cos(1013π))^2 = 1sin^2(x) + cos^2(1013π) = 1sin^2(x) + sin^2(π/2 - 1013π) = 1Now we need to simplify sin^2(π/2 - 1013π):sin^2(π/2 - 1013π) = sin^2(π/2)cos^2(1013π) - 2sin(π/2)cos(1013π)sin(1013π/2) + sin^2(1013π/2)= 1(cos(1013π))^2 - 2sin(1013π/2)cos(1013π) + 0= cos^2(1013π) - 2sin(1013π)cos(1013π)= cos(1013π)(cos(1013π) - 2sin(1013π))Using the identity sin^2(x) + cos^2(x) = 1, we can rewrite sin^2(x) as 1 - cos^2(x):sin^2(x) + cos^2(x) = 11 - cos^2(x) + cos^2(1013π) = 11 - cos(1013π)(cos(1013π) - 2sin(1013π)) + cos^2(1013π) = 1cos(1013π) - cos(1013π)^2 + 2sin(1013π)cos(1013π) = 1cos(1013π) + cos(1013π)(2sin(1013π) - cos(1013π)) = 1cos(1013π)(2sin(1013π) - cos(1013π) + 1) = 1cos(1013π) = 1 / (2sin(1013π) - cos(1013π) + 1)Therefore, the exact value of sin−1(cos(1013​π)) is sin−1(1 / (2sin(1013π) - cos(1013π) + 1)).

Learn more about Exact value of sin−1

brainly.com/question/1625873

#SPJ11

Answer:

10. To find the area of rhombus ABCD, we can use the formula:

Area = (diagonal 1 x diagonal 2) / 2

We need to find the length of both diagonals. Since the diagonals of a rhombus are perpendicular and bisect each other, we can use the Pythagorean theorem to find the length of each diagonal.

AC is one diagonal, AB is a side of the rhombus, and BD is the other diagonal divided by 2 (since BD bisects AC):

BD = AC/2 = 10/2 = 5 cm

Using the Pythagorean theorem with AC and BD:

AC^2 = AB^2 + BD^2

AC^2 = 13^2 + 5^2

AC^2 = 169 + 25

AC^2 = 194

AC = sqrt(194) ≈ 13.93 cm

Now that we have the lengths of both diagonals:

Area = (AC x BD) / 2

    = (13.93 x 5) / 2

    ≈ 34.83 cm^2

Therefore, the area of rhombus ABCD is approximately 34.83 cm^2.

11. We know that the area of rhombus ABCD is 96 cm^2, and that BD is 8 cm. To find the length of AC, we can use the formula:

Area = (diagonal 1 x diagonal 2) / 2

Solving for diagonal 1 (AC):

AC = (2 x Area) / BD

  = (2 x 96) / 8

  = 24 cm

Therefore, the length of AC is 24 cm.

12. We know that AB is a side of the rhombus and that AB = 16 m. We also know that mZABD = 60 degrees. We can use trigonometry to find the length of the diagonals.

First, we can find the length of AD using the law of cosines:

AD^2 = AB^2 + BD^2 - 2(AB)(BD)cos(mZABD)

AD^2 = 16^2 + (2x)^2 - 2(16)(2x)cos(60)

AD^2 = 256 + 4 - 32x

AD^2 = 260 - 32x

AD = sqrt(260 - 32x)

Then, we can find the length of AC using the law of sines:

AC / sin(mZBAD) = AD / sin(mZABD)

AC / sin(120) = AD / sin(60)

AC = (AD x sin(120)) / sin(60)

AC = (sqrt(260 - 32x) x sqrt(3)) / 2

Now that we have the lengths of both diagonals:

Area = (AC x BD) / 2

    = [(sqrt(260 - 32x) x sqrt(3)) / 2] x 8 / 2

    = 2(sqrt(260 - 32x) x sqrt(3))

    ≈ 67.29 m^2

Therefore, the area of rhombus ABCD is approximately 67.29 square meters.

13. We know that the perimeter of the rhombus is 20 mm, so each side is 5 mm. We also know that AC is one of the diagonals. To find the length of the other diagonal, we can use the Pythagorean theorem.

Let x be half the length of the other diagonal:

AC^2 = (2x)^2 + 5^2

x^2 = (AC^2 - 25) / 4

x = sqrt((AC^2 - 25) / 4)

Now that we have the lengths of both diagonals:

Area = (AC x BD) / 2

    = (AC x 2x) / 2

    = xAC

    = sqrt((AC^2 - 25) / 4) x AC

    ≈ 19.80 mm^2

Therefore, the area of rhombus ABCD is approximately 19.80 square millimeters.

The value is x in the equation is -2

The value of y in the equation is -8.67

5x - 3y= 16...........equation 1

4x + 5x= -2..........equation 2

Multiply equation 1 by 4 and equation 2 by 5

20x - 12y= 64

20x + 25x= -10

-37x= 74

x= -74/37

x= -2

Substitute -2 for x in equation 1

5x - 3y= 16

5(-2) - 3y= 16

-10 -3y= 16

-3y= 16+10

-3y= 26

y= -26/3

y= -8.67

Hence the value of x is -2 and the value of y is -8.67

Read more on equation here

https://brainly.com/question/16439524

#SPJ1

Answer:    30

Step-by-step explanation: TRUSy