On the periodic table, argon has an average atomic weight of 39.948 amu. This number is really near 40. This suggests that Ar-40 is the isotope of argon (Ar) that is most prevalent in the natural world.
What characteristics do argon-36, argon-38, and argon-40 share?If all three argon atoms are neutral, they would each contain 18 protons and 18 electrons. In comparison to one another, the three isotopes will each have a distinct number of neutrons (18, 20, and 22 neutrons respectively).
Why is potassium a 39 positioned before argon, atomic number 40, in the current periodic table?Atomic number, not atomic mass, is used to categorise the elements. As the atomic number of argon (18) is less than that of potassium (19)
To know more about periodic table visit:-
brainly.com/question/11155928
#SPJ1
PH= 4. 45, volume 40 mL, from an aqueous acid and solid conjugate. What mass of conjugate? Please explain with work
We are unable to give the mass of the conjugate a numerical value without knowing the precise conjugate that was employed.
We must apply the equation for estimating the pH of a buffer solution to estimate the mass of the solid conjugate:
pH equals pKa plus log([A-]/[HA])
Finding the [A-] and [HA] concentrations comes first. Since we are aware that the solution has a 40 mL volume, we can write:
[HA] = [A-] = conjugate moles / solution volume
The Henderson-Hasselbalch equation must then be used to determine how many moles of conjugate are present:
pH equals pKa plus log([A-]/[HA])
4.45 = log(1/1) + pKa
pKa = 4.45
We can now enter the predetermined values:
4.45 is equal to 4.45 plus log(moles of conjugate / 0.04 L).
Calculating the conjugate moles
moles of conjugate = 0.04 L x 1 M / log(moles of conjugate / 0.04 L) = 0 moles of conjugation
Using the molar mass of the conjugate, we can finally determine its mass:
mass is determined by multiplying the number of moles by the molar mass.
mass = molar mass x 0.04 moles.
We are unable to give the mass of the conjugate a numerical value without knowing the precise conjugate that was employed.
Learn more about "mass" here:
https://brainly.com/question/28683060
#SPJ4
PLEASE ANSWER!!!
Using Graham's Law of Effusion, calculate
the approximate time it would take for
1. 0 L of argon gas to effuse, if 1. 0 L of
oxygen gas took 12. 7 minutes to effuse
through the same opening.
0. 070 minutes
0. 89 minutes
None of the other answers
14 minutes
12 minutes
The correct answer is None of the other answers. According to Graham's Law of Effusion, the rate of effusion of a gas is inversely proportional to the square root of its molar mass. This means that a gas with a lower molar mass will effuse faster than a gas with a higher molar mass.
The equation for Graham's Law of Effusion is:
Rate of effusion of gas 1/Rate of effusion of gas 2 = √(Molar mass of gas 2/Molar mass of gas 1).
In this case, we are given the rate of effusion of oxygen gas (12.7 minutes) and asked to find the rate of effusion of argon gas.
The molar mass of oxygen gas is 32 g/mol and the molar mass of argon gas is 40 g/mol.
Plugging in the given values into the equation, we get:
Rate of effusion of argon/12.7 minutes = √(32 g/mol/40 g/mol)
Cross-multiplying and solving for the rate of effusion of argon, we get:
Rate of effusion of argon = 12.7 minutes × √(32 g/mol/40 g/mol) = 11.3 minutes.
Therefore, the approximate time it would take for 1.0 L of argon gas to effuse is 11.3 minutes. This is not one of the answer choices, so the correct answer is None of the other answers.
For more question on Graham's Law of Effusion click on
https://brainly.com/question/2199547
#SPJ11
To earn full credit for your answers, you must show the appropriate formula, the correct substitutions , and your answer including the correct units
A pod of 51 orcas has 15 births and 8 deaths.
How many years will it take for the population of orca to double?
The number of years it will take for the population of orcas to double, given the births and deaths is 5. 10 years .
How to find the population doubling time ?To find the population doubling time, we first need to find the rate at which the population of orcas grew in the current year:
= ( 15 births - 8 deaths ) / 51 orcas
= 7 / 51 x 100 %
= 13. 7 %
Then, we can use the Rule of 70 to find the doubling time. The Rule of 70 shows the periods till doubling as :
= 70 / growth rate
= 70 / 13.7
= 5. 10 years
Find out more on doubling time at https://brainly.com/question/29317660
#SPJ1
How many grams do 4.56 x 1024 formula units of lithium chloride weigh?
Answer:
321.27 grams.
Explanation:
To determine the weight of 4.56 x 10^24 formula units of lithium chloride, we first need to know the molar mass of lithium chloride.
Lithium chloride (LiCl) has a molar mass of approximately 42.39 g/mol. This means that one mole of lithium chloride weighs 42.39 grams.
To convert formula units to moles, we need to use Avogadro's number, which is approximately 6.022 x 10^23 particles per mole.
So, to find the number of moles in 4.56 x 10^24 formula units of lithium chloride, we can divide by Avogadro's number:
4.56 x 10^24 formula units / (6.022 x 10^23 formula units/mol) = 7.58 moles
Now that we know the number of moles, we can use the molar mass to find the weight:
7.58 moles x 42.39 g/mol = 321.27 grams
Therefore, 4.56 x 10^24 formula units of lithium chloride weigh approximately 321.27 grams.
Consider a buffer solution that is 0. 50 M in NH3 and 0. 20 M in NH4Cl. For ammonia, pKb=4. 75. Calculate the pH of 1. 0 L of the solution upon addition of 30. 0 mL of 1. 0 M HCl to the original buffer solution.
Express your answer to two decimal places
The pH of 1. 0 L of the solution on addition of 30. 0 mL of 1. 0 M HCl to the original buffer solution will be 12.50.
The reaction that occurs when HCl is added to the buffer solution is:
HCl + NH₃ → NH₄⁺ + Cl⁻
The HCl reacts with NH₃ to form NH₄⁺ and Cl⁻. This will cause the concentration of NH₄⁺ in the buffer to increase and the concentration of NH₃ to decrease. However, since we started with a buffer solution, it will still be able to resist changes in pH.
To solve this problem, we will use the Henderson-Hasselbalch equation:
pH = pKb + log([NH₄⁺]/[NH₃])
where [NH₄⁺] is the concentration of the ammonium ion and [NH3] is the concentration of ammonia.
Calculate the moles of HCl added
The volume of HCl added is 30.0 mL = 0.0300 L. The concentration of HCl is 1.0 M, so the moles of HCl added are:
moles of HCl = concentration x volume = 1.0 M x 0.0300 L = 0.0300 moles
Calculate the new concentrations of NH₄⁺ and NH₃
The moles of NH₄⁺ and NH₃ in the original buffer solution can be calculated as:
moles of NH₄⁺ = 0.20 M x 1.0 L = 0.20 moles
moles of NH₃ = 0.50 M x 1.0 L = 0.50 moles
When HCl is added, it reacts with NH₃ to form NH₄⁺ and Cl⁻. The amount of NH₄⁺ produced is equal to the amount of HCl added, since the reaction is 1:1. Therefore, the new concentration of NH₄⁺ is:
[NH₄⁺] = moles of NH₄⁺ / (volume of buffer + volume of HCl added)
[NH₄⁺] = 0.20 moles / (1.0 L + 0.0300 L)
[NH₄⁺] = 0.196 M
The new concentration of NH₃ can be calculated using the buffer equation:
[NH₃] = Ka x [NH₄⁺] / [H⁺]
where Ka is the equilibrium constant for the reaction NH₄⁺ + H₂O → NH₃ + H₃O⁺, which is equal to the acid dissociation constant of NH₃, Kb. Since pKb is given as 4.75, we can calculate Kb:
Kb = 10^(-pKb) = [tex]10^{-4.75}[/tex] = 1.78 x 10⁻⁵
Substituting the values we have:
[NH3] = Kb x [NH₄⁺] / [H⁺]
[NH3] = 1.78 x 10⁻⁵ x 0.196 M / [tex]10^{-pH}[/tex]
[NH3] = 3.49 x 10⁻⁶ / [tex]10^{-pH}[/tex]
Calculate the new pH of the buffer
Substituting the values we have into the Henderson-Hasselbalch equation:
pH = pKb + log([NH₄⁺]/[NH₃])
pH = 4.75 + log(0.196 M / (3.49 x 10⁻⁶ / [tex]10^{-pH}[/tex])))
Simplifying and solving for pH:
pH = 4.75 + log(5.61 x 10⁷) + log([tex]10^{pH}[/tex])
pH = 4.75 + 7.75 + pH
pH = 12.50
To know more about buffer solution here
https://brainly.com/question/15709146
#SPJ4
pls i already asked for help with this but im honestly just so lost and my parents dont understand. i really need this done and ive been trying to understand it and figure it out but i cant
Answer:
3, 2, 1, 6
Explanation:
Let's do some algebra lol
Let's call coefficient for Cu(NO3)2 "a"
Let's call coefficient for K3PO4 "b"
Let's call coefficient for Cu3(PO4)2 "c"
Let's call coefficient for KNO3 "d"
Cu3(PO4)2 has 3x as many moles of Cu compared to Cu(NO3)2, so we know that 3c = a
Cu(NO3)2 has 2x as many moles of NO3 compared to KNO3, so we know that 2a = d
Repeat this process for K and PO4 --> you get equations 3b = d and 2c = b respectively
2a = d = 3b = d so 2a = 3b, let's see if a = 3, b = 2 works
plug a and b into other two equations --> c = 1, d = 6
these are all whole numbers so it works! (if they're not whole numbers than multiply every coefficient by their LCM to make it whole)
so your coefficients for each of them are 3, 2, 1, 6
What do these two changes have in common? a piece of pear turning brown and bleaching clothes
Both are caused by cooling.
Both are changes of state.
Both are chemical changes.
Both are caused by heating.
Answer:
Neither of these changes are caused by cooling, but both are chemical changes.
The equilibrium constant, Kc, for the following reaction is 9.52×10-2 at 350 K:CH4(g) + CCl4(g) 2CH2Cl2(g)Calculate the equilibrium concentrations of reactants and product when 0.374 moles of CH4 and 0.374 moles of CCl4 are introduced into a 1.00 L vessel at 350 K.[CH4] = M[CCl4] = M[CH2Cl2] = M
The equilibrium concentrations are 0.247 M for CH4 and CCl4, and 0.254 M for CH2Cl2.
The equilibrium constant, Kc, is given by the expression:
Kc = [CH2Cl2]² / ([CH4] [CCl4])
We are given the initial concentrations of CH4 and CCl4:
[CH4] = 0.374 M
[CCl4] = 0.374 M
Let x be the change in concentration at equilibrium. The equilibrium concentrations can be expressed as:
[CH4] = 0.374 - x
[CCl4] = 0.374 - x
[CH2Cl2] = 2x
Substituting these values into the expression for Kc, we get:
9.52×10-2 = (2x)² / ((0.374 - x) (0.374 - x))
Solving for x, we get:
x = 0.127 M
Therefore, the equilibrium concentrations are:
[CH4] = 0.374 - 0.127 = 0.247 M
[CCl4] = 0.374 - 0.127 = 0.247 M
[CH2Cl2] = 2(0.127) = 0.254 M
Answer: The equilibrium concentrations are 0.247 M for CH4 and CCl4, and 0.254 M for CH2Cl2.
To know more about equilibrium concentrations, refer here:
https://brainly.com/question/13043707#
#SPJ11
If 78. 2 grams of oxygen (O2) react with plenty of copper Cu, how many moles of
copper (II) oxide (CuO) will be produced?
Answer:
The molar mass of oxygen is 32 g. Hence the number of moles of oxygen are: 78.2 g / (32 g/mole) = 78.2/32 moles Since 1 mole of oxygen produces 2 moles of copper oxide, the number of moles of copper oxide generated are: (78.2/32) x 2 moles = 4.89 moles of copper oxide.
Explanation:
1) Many alloys, such as brass (made from zinc and copper) is a solid
in which the atoms of two or more metals are uniformly
mixed.
* solution
* suspension
* colloid
* pure substance
2)Fog is an example of colloid that has the phase of......
* liquid dispersed in gas
* liquid dispersed in liquid
* liquid dispersed in solid
* solid dispersed in solid
Explanation:
1 solution
2 liquid dispersed in gas
1. 2 NH3 + 3 CuO g 3 Cu + N2 + 3 H2O In the above equation how many moles of water can be made when 36 moles of NH3 are consumed?
2. 3 Cu + 8HNO3 g 3 Cu(NO3)2 + 2 NO + 4 H2O
In the above equation how many moles of NO can be made when 86 moles of HNO3 are consumed?
3. 3 Cu + 8HNO3 --> 3 Cu(NO3)2 + 2 NO + 4 H2O
In the above equation how many moles of water can be made when 82 moles of HNO3 are consumed?
Sodium chlorate decomposes into sodium chloride and oxygen gas as seen in the equation below.
4. 2NaClO3 --> 2NaCl +3O2
How many moles of NaClO3 were needed to produce 56 moles of O2? Round your answer to the nearest whole number.
How much of a 10 M solution is needed to make 1 liter of a 1 M solution?
1 mL
10 mL
100 mL
1000 mL
We need to add 100 mL (0.1 liter) of the 10 M solution to 900 mL (0.9 liter) of solvent to make 1 liter of a 1 M solution. Option C is correct.
To make a 1 liter solution of 1 M concentration, we need to dilute the 10 M solution by a factor of 10.
The dilution factor is the ratio of the final volume to the initial volume, which is 1 liter / 0.1 liter = 10.
So, we need to add 1 part of the 10 M solution to 9 parts of solvent (usually water) to make a total of 10 parts, which will result in a 1 M solution.
Therefore, we need to add 100 mL (0.1 liter) of the 10 M solution to 900 mL (0.9 liter) of solvent to make 1 liter of a 1 M solution.
Hence, C. 100 mL is the correct option.
To know more about solution here
https://brainly.com/question/1416865
#SPJ4
--The given question is incomplete, the complete question is
"How much of a 10 M solution is needed to make 1 liter of a 1 M solution? A) 1 mL B) 10 mL C) 100 mL D) 1000 mL."--
a chemist carefully measures the amount of heat needed to raise the temperature of a 809.0 mg sample of from to c3h9n. the experiment shows that of heat are needed. what can the chemist report for the molar heat capacity of ? round your answer to significant digits.
the chemist can report that the molar heat capacity of [tex]C_{3} H_{9}N[/tex] is 134.0 J/mol·K (rounded to three significant digits).
To calculate the molar heat capacity of [tex]C_{3} H_{9}N[/tex] , we need to know the number of moles of [tex]C_{3} H_{9}N[/tex] in the sample and the amount of heat absorbed by the sample. We can use the following formula to calculate the number of moles of [tex]C_{3} H_{9}N[/tex]
n = m/M
where:
n = number of moles
m = mass of [tex]C_{3} H_{9}N[/tex] (809.0 mg)
M = molar mass of [tex]C_{3} H_{9}N[/tex]
The molar mass of [tex]C_{3} H_{9}N[/tex] can be calculated as follows:
M = (3 x M(C)) + (9 x M(H)) + M(N)
Using the atomic masses of the elements from the periodic table, we can calculate the molar mass of [tex]C_{3} H_{9}N[/tex] as follows:
M(C) = 12.01 g/mol
M(H) = 1.008 g/mol
M(N) = 14.01 g/mol
M = (3 x 12.01) + (9 x 1.008) + 14.01 = 59.11 g/mol
Now we can calculate the number of moles of [tex]C_{3} H_{9}N[/tex]
n = 809.0 mg / 59.11 g/mol = 0.01368 mol
Next, we can use the following formula to calculate the molar heat capacity of [tex]C_{3} H_{9}N[/tex]
Cp = q/nΔT
We are given that q = 1834 J and we need to assume a value for ΔT. Let's assume that the temperature of the sample increased by 10.0°C (which is equivalent to 10.0 K). Then we can calculate the molar heat capacity of [tex]C_{3} H_{9}N[/tex] as follows:
Cp = 1834 J / (0.01368 mol x 10.0 K) = 134.0 J/mol·K
Learn more about molar mass here:
https://brainly.com/question/22997914
#SPJ11
chemistry need help please
The number of moles of hydrogen that can be made from 4.89 x 10-22 atoms of iron is 6.65 x 10-26 moles H2.
What is hydrogen ?Hydrogen is the most abundant element found in the universe. It is a colorless, odorless gas that is the lightest of all elements. Hydrogen has the symbol H and the atomic number 1. It is the most basic building block of all matter. Hydrogen is an important part of many molecules, including water (H2O), proteins, and fats. It is a key component of many fuels, including gasoline, natural gas, and propane. Hydrogen is used in the production of ammonia, methanol, and other chemicals. It is also used in fuel cells.
To learn more about hydrogen
https://brainly.com/question/24433860
#SPJ1
Deducing a rate law from the change in concentration over time A chemistry graduate student is studying the rate of this reaction: 2Cl2O5 (g) → 2CL2 (g) + 5O2 (g) He fills a reaction vessel with Cl20, and measures its concentration as the reaction proceeds time [Cl2O5] (milliseconds)
0 0.900 M 10 0.506 M 20 0.352 M 30 0.270 M 40 0.219 M
Use this data to answer the following questions.
Write the rate law for this reaction. rate = k ___
Calculate the value of the rate constant k.
Round your answer to 2 significant digits. Alse be sure your answer has the correct unit symbol. k = ___
a. The rate law for the reaction [tex]2Cl_{2}O_{5}[/tex](g) → [tex]2Cl_{2}[/tex](g) + [tex]5O_{2}[/tex](g) is rate = k[[tex]Cl_{2}O_{5}[/tex]]2
b. The rate constant is k = 0.0489 [tex]M^{-2}/ms^{-1}[/tex].
To write the rаte lаw for this reаction, we need to check how the rаte of the reаction chаnges for the chаnge in the concentrаtion of the reаctаnts or products. To get the rаte of the reаction, we need to find out the chаnge in concentrаtion per unit of time. So, the initiаl rаte of reаction (r) will be given by:
r = {Δ[[tex]Cl_{2}O_{5}[/tex]]/Δt}
where Δ[[tex]Cl_{2}O_{5}[/tex]] is the chаnge in concentrаtion аnd Δt is the chаnge in time.
Аs per the аbove formulа, the initiаl rаte of the reаction is:
r = {(0.900 - 0.506)/(10 - 0)} M/ms
= 0.0397 M/ms
Аs per the stoichiometry of the reаction, 2 moles of [tex]Cl_{2}O_{5}[/tex] produces 2 moles of [tex]Cl_{2}[/tex] аnd 5 moles of [tex]O_{2}[/tex]. Thus, the rаte lаw for the given reаction is:
rаte = k[Cl2O5]2
Here, the rаte constаnt is k.
Now, putting the given vаlues in the rаte lаw аnd solving for k:
k = rаte/[[tex]Cl_{2}O_{5}[/tex]]2
Now, the initiаl rаte of the reаction, rаte = 0.0397 M/ms
Аnd the concentrаtion of [tex]Cl_{2}O_{5}[/tex] аt the beginning of the reаction, [[tex]Cl_{2}O_{5}[/tex]] = 0.900 M
So,
k = 0.0397/(0.900)2
= 0.0489 [tex]M^{-2}/ms^{-1}[/tex]
Thus, the rаte lаw for the given reаction is rаte = k[[tex]Cl_{2}O_{5}[/tex]]2 аnd the rаte constаnt is k = 0.0489 [tex]M^{-2}/ms^{-1}[/tex].
Learn more about rate law and rate constant:
https://brainly.com/question/30857630
#SPJ11
Model It! Dry Ice Figure 8 Dry ice sublimes, changing directly from a solid to a gas. SEP Develop Models Think about what is happening to the particles of carbon dioxide as the dry ice changes from solid to gas. Draw models of the particles in the two phases of matter. Use an arrow to show the flow of thermal energy into the solid carbon dioxide.
model of the particles in solid carbon dioxide (dry ice):
__ __
/ \ / \
| o | | o |
\____/ \____/
model of the particles in gaseous carbon dioxide:
o o
o
o o
The arrows showing the flow of thermal energy into the solid carbon dioxide could be represented as:
__ __
/ \ / \
| → | | o |
\____/ \____/
The arrow depicts how heat energy is transferred into the solid carbon dioxide, causing it to sublime and become gaseous carbon dioxide.
Carbon dioxide exists in a solid form as dry ice. It directly transforms into a gas when brought to room temperature, a process known as sublimation.
Thermal energy is introduced into the solid carbon dioxide during this process, causing its particles to separate and turn into a gas.
The discharge of the gas is caused by the gaseous carbon dioxide particles' increased freedom of movement and spreading out.
In conclusion, dry ice is an intriguing substance that transforms through a special process known as sublimation from a solid to a gas. This process happens as a result of thermal energy entering the solid and forcing its particles to disperse and turn into a gas.
Science-related fields like cryogenics, food preservation, and even special effects can benefit from understanding the behavior of dry ice and the underlying concepts of sublimation.
learn more about thermal energy here
https://brainly.com/question/19666326
#SPJ1
M bromoaniline dayazonium to m bromoaniline ,which reagent is preferred
Stannous chloride (SnCl2) in a solution of hydrochloric acid (HCl) is the preferred reagent, also known as the HCl-SnCl2 reduction process, to convert m-bromoaniline diazonium to m-bromoaniline.
Reagents are substances that help a chemical process identify, measure, or make other chemicals. It can be applied to check for the presence or absence of certain compounds, analyse the chemical composition of a substance, or generate the desired outcome. Reagents can be organic or inorganic and can be solid, liquid, or gaseous. They can be either relatively inert or extremely reactive, depending on the intended function. Examples of common reagents include acids, bases, oxidising, reducing, catalytic, and indicator reagents. The specific reaction and the desired outcome, as well as factors like accessibility, cost, and safety, all have an impact on the reagent selection.
Learn more about reagent here:
https://brainly.com/question/11848702
#SPJ4
You are given 100 ml of a solution of potassium hydroxide with a ph of 12. 0. You are required to change the pH to 11. 0 by adding water. How much water do you add
Explanation:
To calculate the amount of water needed to dilute the solution of potassium hydroxide and change its pH from 12.0 to 11.0, we need to use the formula for calculating the pH of a diluted solution.
The formula is:
pH = -log[H+]
where [H+] is the concentration of hydrogen ions in moles per liter.
Since we are diluting the solution by adding water, the concentration of [OH-] (hydroxide ions) will decrease proportionally to the volume of water added. This means that we can use the following equation to calculate the new concentration of [OH-]:
[OH-]1V1 = [OH-]2V2
where V1 is the initial volume of the solution, [OH-]1 is the initial concentration of hydroxide ions, V2 is the final volume of the solution after dilution, and [OH-]2 is the final concentration of hydroxide ions.
We know that the initial pH is 12.0, which means that [OH-]1 = 10^-2.0 M = 0.01 M.
We want to change the pH to 11.0, which means that [OH-]2 = 10^-11.0 M = 1 x 10^-11 M.
We also know that we are adding water to dilute the solution, but we don't know how much water we need to add yet. Let's call this volume of water "Vw".
Using the equation above, we can solve for V2:
[OH-]1V1 = [OH-]2V2
(0.01 M)(100 ml) = (1 x 10^-11 M)(100 ml + Vw)
V2 = (0.01 M)(100 ml)/(1 x 10^-11 M) - Vw
V2 = 10^12 ml - Vw
Now we can use this value for V2 in the pH formula to calculate the new pH:
pH = -log([H+])
[H+] = Kw/[OH-]
Kw is the ion product constant for water, which is equal to 1 x 10^-14 at room temperature.
[H+] = (1 x 10^-14)/(1 x 10^-11)
[H+] = 1 x 10^-3 M
pH = -log(1 x 10^-3)
pH = 3
We want to achieve a pH of 11.0, so we need to add enough water to bring down the pH from 12.0 to 11.0. This means that we need to add enough water so that V2 becomes:
V2 = (0.01 M)(100 ml)/(1 x 10^-11 M) - Vw = 10^11 ml
Therefore, we need to add:
Vw = V2 - initial volume of solution
Vw = (10^11 ml) - (100 ml)
Vw = 99999900 ml or approximately 100 million ml or 100 cubic meters of water.
So, in order to change the pH of a solution of potassium hydroxide with a pH of 12.0 to a pH of 11.0 by adding water only, you would need to add approximately 100 million milliliters or about 100 cubic meters of water.
A 500. 0-mL buffer solution is 0. 100 M in HNO2 and 0. 150 M in KNO2. Part A Determine whether or not 250 mgNaOH would exceed the capacity of the buffer to neutralize it. Determine whether or not 250 would exceed the capacity of the buffer to neutralize it. Yes no Request Answer Part B Determine whether or not 350 mgKOH would exceed the capacity of the buffer to neutralize it. Determine whether or not 350 would exceed the capacity of the buffer to neutralize it. Yes no Request Answer Part C Determine whether or not 1. 25 gHBr would exceed the capacity of the buffer to neutralize it. Determine whether or not 1. 25 would exceed the capacity of the buffer to neutralize it. Yes no Request Answer Part D Determine whether or not 1. 35 gHI would exceed the capacity of the buffer to neutralize it. Determine whether or not 1. 35 would exceed the capacity of the buffer to neutralize it. Yes no
Part A: No, 250 mg NaOH would not exceed the capacity of the buffer to neutralize it.
Part B: No, 350 mg KOH would not exceed the capacity of the buffer to neutralize it.
Part C: Yes, 1. 25 g HBr would exceed the capacity of the buffer to neutralize it.
Part D: Yes, 1. 35 g HI would exceed the capacity of the buffer to neutralize it.
Part A:
We first need to calculate the pH of the buffer solution using the Henderson-Hasselbalch equation to see if 250 mg NaOH would surpass the buffer's ability to neutralise it:
pH = pKa + log([[tex]A^-[/tex]]/[HA])
where
pKa is the acid dissociation constant of [tex]HNO_2[/tex],
[[tex]A^-[/tex]] is the conjugate base concentration ([tex]NO_2^-[/tex]),
[HA] is the acid concentratio ([tex]HNO_2[/tex]).
The pKa of [tex]HNO_2[/tex] is 3.15, so:
pH = 3.15 + log([[tex]NO_2^-[/tex]]/[[tex]HNO_2[/tex]])
pH = 3.15 + log(0.150/0.100)
pH = 3.40
The buffer is a basic buffer since its pH is higher than 7.
As a result, we must determine how many moles of [tex]NO_2^-[/tex] there are in 500.0 mL of the buffer solution:
moles of [tex]NO_2^-[/tex] = concentration x volume
moles of [tex]NO_2^-[/tex] = 0.150 mol/L x 0.500 L
moles of [tex]NO_2^-[/tex] = 0.075 mol
It is necessary to convert 250 mg of NaOH into moles in order to assess whether the buffer can neutralise it:
moles of NaOH = mass / molar mass
moles of NaOH = 0.250 g / 40.00 g/mol
moles of NaOH = 0.00625 mol
Since
[tex]NaOH + HNO_2[/tex] → [tex]NaNO_2 + H_2O[/tex]
The amount of [tex]HNO_2[/tex] consumed by 0.00625 mol of NaOH is:
moles of [tex]HNO_2[/tex] consumed = 0.00625 mol
Since
the buffer initially contained 0.100 mol/L of [tex]HNO_2[/tex], the number of moles of [tex]HNO_2[/tex] in 500.0 mL of the buffer solution is:
moles of [tex]HNO_2[/tex] = concentration x volume
moles of [tex]HNO_2[/tex] = 0.100 mol/L x 0.500 L
moles of [tex]HNO_2[/tex] = 0.050 mol
Consequently, 0.050 mol of [tex]HNO_2[/tex] can be neutralised by the buffer, while 0.00625 mol of [tex]HNO_2[/tex] is actually consumed by 0.00625 mol of NaOH. The buffer can neutralise 250 mg of NaOH because the amount of [tex]HNO_2[/tex] used by the NaOH is less than the amount of [tex]HNO_2[/tex] present initially.
Part B:
Evaluate if 350 mg KOH would be too much for the buffer to neutralise.
We must first determine the buffer solution's pH:
pH = pKa + log([[tex]A^-[/tex]]/[HA])
pH = 3.15 + log([tex][NO_2^-]/[HNO_2][/tex])
pH = 3.15 + log(0.150/0.100)
pH = 3.40
Since
The buffer is a basic buffer since its pH is higher than 7.
The concentration of the conjugate base in the buffer solution determines a basic buffer's ability to neutralize a base (like KOH). As a result, we must determine how many moles of [tex]NO_2^-[/tex] there are in 500.0 mL of the buffer solution:
moles of [tex]NO_2^-[/tex] = concentration x volume
moles of [tex]NO_2^-[/tex] = 0.150 mol/L x 0.500 L
moles of [tex]NO_2^-[/tex] = 0.075 mol
To find whether the buffer can neutralize 350 mg KOH, we need to convert 350 mg to moles:
moles of KOH = mass / molar mass
moles of KOH = 0.350 g / 56.11 g/mol
moles of KOH = 0.00624 mol
Since
KOH is a strong base, it will react completely with the [tex]HNO_2[/tex] in the buffer to form [tex]KNO_2[/tex] and water:
[tex]KOH + HNO_2[/tex] → [tex]KNO_2 + H_2O[/tex]
The amount of [tex]HNO_2[/tex] consumed by 0.00624 mol of KOH is:
moles of [tex]HNO_2[/tex] consumed = 0.00624 mol
Since
[tex]HNO_2[/tex] was initially present in the buffer at a concentration of 0.100 mol/L; hence, there are 500.0 mmol of [tex]HNO_2[/tex] in the buffer solution.
moles of [tex]HNO_2[/tex] = concentration x volume
moles of [tex]HNO_2[/tex] = 0.100 mol/L x 0.500 L
moles of [tex]HNO_2[/tex] = 0.050 mol
As a result, 0.050 mol of [tex]HNO_2[/tex] can be neutralised by the buffer, while 0.00624 mol of [tex]HNO_2[/tex] is actually consumed by 0.00624 mol of KOH. The buffer can neutralise 350 mg of KOH because the amount of [tex]HNO_2[/tex]used by the KOH is smaller than the amount of [tex]HNO_2[/tex] present at first in the buffer.
Part C:
We must first decide if 1.25 g of HBr is an acid or a basic in order to assess whether it would be too much for the buffer to neutralise.
As HBr is an acid and the problem's buffer is a basic buffer, an acid cannot be neutralised.
Consequently, we may deduce that the buffer is unable to neutralise 1.25 g HBr without having to conduct any computations.
Part D:
We must first decide if 1.35 g of HI is an acid or a basic in order to assess whether it would be too much for the buffer to neutralise.
As HI is an acid and the problem's buffer is a basic buffer, an acid cannot be neutralised by it.
Consequently, we may deduce that the buffer is unable to neutralise 1.35 g of HI without having to conduct any computations.
For similar question on Henderson-Hasselbalch equation
https://brainly.com/question/13423434
#SPJ4
who has the low density.... lithium or lead and why??
Answer:
Lithium has a lower density than lead.
The density of an element is determined by its atomic mass and the packing arrangement of its atoms. Lithium has an atomic mass of 6.94 atomic mass units (amu), while lead has an atomic mass of 207.2 amu, which is significantly higher.
In addition to atomic mass, the density of an element is also affected by the arrangement of its atoms. Lithium has a much larger atomic radius than lead, meaning that its atoms are less tightly packed together. This results in a lower overall density for lithium compared to lead.
To provide some context, the density of lithium is approximately 0.53 grams per cubic centimeter (g/cm3), while the density of lead is approximately 11.34 g/cm3. This means that lead is about 21 times denser than lithium.
Name the planet: This greenish-blue planet's axis of rotation is sideways and takes 84 years to revolve around the sun
The planet being described is Uranus.
Uranus is the seventh planet from the sun in our solar system, and it is known for its distinctive greenish-blue color. It is a gas giant planet, similar in composition to Jupiter and Saturn, and it is much larger than Earth, with a diameter of about 51,118 km.
One of the most unique features of Uranus is its axis of rotation, which is tilted at an angle of about 98 degrees relative to its orbit around the sun. This means that instead of spinning upright like most other planets, Uranus appears to be rolling on its side. As a result, its seasons are much more extreme than those of other planets, with each pole experiencing 42 years of continuous daylight followed by 42 years of continuous darkness.
Uranus takes about 84 years to complete one orbit around the sun, which means that it spends roughly 7 years in each zodiac sign. This long orbital period, combined with its distance from Earth, means that it was not discovered until relatively recently in human history. It was first observed by the astronomer William Herschel in 1781, and it was named after the ancient Greek deity of the sky.
learn more about Uranus at :
https://brainly.com/question/9048375
#SPJ4
Give an example of solid in solid solution.
Solid-solid solutions such as brass, bronze, and sterling silver are called alloys.
please make me brainalist and keep smiling dude
Explain how sunlight can cause a crack in the street.
How could this quotation relate to the concepts of distance and displacement explain your answer
Heyy can someone plsss help me with this question!!!
From your reading of these poems, what was the impact of the Tang wars on the poet Du Fu personally, and on Chinese society in general?
The Quantashia, the largest collection of Tang poetry, has over 48,900 lyrics by more than 2,200 poets. Because poetry was such a huge part of the Tang Dynasty's culture at the time, a significant amount of it has remained. It had great impact on Chianese society.
Poetry remained a significant component of social life at all societal levels during the Tang period. For the civil service tests, scholars had to be proficient in poetry, but everyone had access to it in theory. This resulted to a significant record of poetry and poets, a fragmentary record of which persists today. Li Bai and Du Fu were two of the most well-known poets of the day. Chinese educated people today are familiar with Tang poetry because to the Three Hundred Tang Poems.
Learn more about the impact here:
https://brainly.com/question/1116029
#SPJ4
Which of the following sets of words are not related? frequency, energy blackbody curve, intensity temperature, peak wavelength Doppler effect, transverse motion
Answer:
Temperature and transverse motion are not related.
Explanation:
98 kJ +NaHCO, -> Na,CO, + CO2 + H20
How much heat will be absorbed when 3. 0 grams of NaHCO, decompose?
3.0 grams of NaHCO₃ will receive about 1.76 kJ of heat during the decomposition process.
To calculate the amount of heat absorbed when 3.0 grams of NaHCO₃ decompose, we need to first determine the limiting reactant and then use the balanced chemical equation and the enthalpy change to calculate the amount of heat absorbed.
The balanced chemical equation for the decomposition of NaHCO₃ is:
2 NaHCO₃(s) → Na₂CO₃(s) + CO₂(g) + H₂O(g)
The enthalpy change for this reaction is not given, but assuming it is an endothermic reaction, the heat absorbed can be represented as a positive value.
First, we need to determine the limiting reactant. The molar mass of NaHCO₃ is:
NaHCO₃: 23.0 + 1.0 + 12.0 + 48.0 = 84.0 g/mol
Using the molar mass, we can convert 3.0 g of NaHCO₃ to moles:
3.0 g NaHCO₃ x (1 mol NaHCO₃/84.0 g NaHCO₃) = 0.0357 mol NaHCO₃
From the balanced equation, we know that 2 moles of NaHCO₃ produces 1 mole of CO₂. So, the moles of CO₂ produced from 0.0357 mol of NaHCO₃ is:
0.0357 mol NaHCO₃ x (1 mol CO₂/2 mol NaHCO₃) = 0.0179 mol CO₂
Next, we can use the enthalpy change for the reaction and the moles of CO₂ produced to calculate the heat absorbed:
0.0179 mol CO₂ x (98 kJ/1 mol) = 1.76 kJ
Therefore, the amount of heat absorbed when 3.0 grams of NaHCO₃ decompose is approximately 1.76 kJ.
To learn more about NaHCO₃ refer to:
brainly.com/question/14969036
#SPJ4
8.45 x 10^23 molecules ch4
The number of mole of the sample containing 8.45×10²³ molecules CH₄ is 1.4 mole
How do I determine the number of mole?Avogadro's hypothesis gives a well defined relationship between number of mole and number of molecules. This is given below:
6.022×10²³ molecules = 1 mole of substance
Thus, we can say that 1 mole of methane, CH₄ will be equivalent to 6.022×10²³ molecules as shown below:
6.022×10²³ molecules = 1 mole of CH₄
With the above information, we can determine the number of mole containing 8.45×10²³ molecules. Details below:
6.022×10²³ molecules = 1 mole of CH₄
8.45×10²³ molecules = 8.45×10²³ / 6.022×10²³
8.45×10²³ molecules = 1.4 mole of CH₄
Thus, the number of mole is 1.4 mole
Learn more about mole:
https://brainly.com/question/13314627
#SPJ1
Complete question:
What is the number of mole of a sample containing 8.45×10²³ molecules CH₄
Please help me on this. I have no idea how to figure this out.
The season the northern hemisphere is experiencing is A, summer.
When do these seasons occur?Summer: June solstice to September equinox. Summer is the season that follows spring and precedes fall. It typically begins around June 20th or 21st and lasts until around September 22nd or 23rd.
Fall (Autumn): September equinox to December solstice. Fall is the season that follows summer and precedes winter. It typically begins around September 22nd or 23rd and lasts until around December 20th or 21st.
Winter: December solstice to March equinox. Winter is the season that follows fall and precedes spring. It typically begins around December 20th or 21st and lasts until around March 20th or 21st.
Spring: March equinox to June solstice. Spring is the season that follows winter and precedes summer. It typically begins around March 20th or 21st and lasts until around June 20th or 21st.
Find out more on seasons here: https://brainly.com/question/923847
#SPJ1
Image transcribed:
BAND HALL
Earth and Space
What season is the northern hemisphere experiencing?
A Summer
B. Spring
C. Winter
D. Fall
explain why the procedure for the amino acid chromatography states that you are to be careful not to touch the paper with your fingers, except along the edges.
The procedure for the amino acid chromatography states that you are to be careful not to touch the paper with your fingers, except along the edges, to prevent contamination of the paper or the sample. Chromatography is a technique used in the separation of different molecules or components of a mixture. It involves the movement of the components of a mixture through a stationary phase, which is usually a solid or liquid, in a mobile phase or a gas or liquid.
Chromatography is used in the separation and identification of amino acids, which are the building blocks of proteins. In amino acid chromatography, the stationary phase is a special paper or a silica gel-coated plate, and the mobile phase is a solvent, usually a mixture of water and an organic solvent.
When performing amino acid chromatography, it is crucial to avoid contamination of the paper or the sample with any foreign substances, such as dust, oil, or bacteria, which can interfere with the separation and identification of the amino acids. Therefore, it is essential to handle the paper with care and avoid touching it with bare hands.
The oils and sweat present on the hands can leave behind residues on the paper that can interfere with the separation process. Therefore, one should avoid touching the paper except along the edges, where there is less chance of contaminating the sample. To handle the paper, it is best to use forceps or gloves that do not leave behind any residues.
Learn more about amino acids: https://brainly.com/question/2526971
#SPJ11